kernel_optimize_test/fs/pipe.c
Linus Torvalds 3b2018f9c9 pipe: do FASYNC notifications for every pipe IO, not just state changes
commit fe67f4dd8daa252eb9aa7acb61555f3cc3c1ce4c upstream.

It turns out that the SIGIO/FASYNC situation is almost exactly the same
as the EPOLLET case was: user space really wants to be notified after
every operation.

Now, in a perfect world it should be sufficient to only notify user
space on "state transitions" when the IO state changes (ie when a pipe
goes from unreadable to readable, or from unwritable to writable).  User
space should then do as much as possible - fully emptying the buffer or
what not - and we'll notify it again the next time the state changes.

But as with EPOLLET, we have at least one case (stress-ng) where the
kernel sent SIGIO due to the pipe being marked for asynchronous
notification, but the user space signal handler then didn't actually
necessarily read it all before returning (it read more than what was
written, but since there could be multiple writes, it could leave data
pending).

The user space code then expected to get another SIGIO for subsequent
writes - even though the pipe had been readable the whole time - and
would only then read more.

This is arguably a user space bug - and Colin King already fixed the
stress-ng code in question - but the kernel regression rules are clear:
it doesn't matter if kernel people think that user space did something
silly and wrong.  What matters is that it used to work.

So if user space depends on specific historical kernel behavior, it's a
regression when that behavior changes.  It's on us: we were silly to
have that non-optimal historical behavior, and our old kernel behavior
was what user space was tested against.

Because of how the FASYNC notification was tied to wakeup behavior, this
was first broken by commits f467a6a664 and 1b6b26ae70 ("pipe: fix
and clarify pipe read/write wakeup logic"), but at the time it seems
nobody noticed.  Probably because the stress-ng problem case ends up
being timing-dependent too.

It was then unwittingly fixed by commit 3a34b13a88ca ("pipe: make pipe
writes always wake up readers") only to be broken again when by commit
3b844826b6c6 ("pipe: avoid unnecessary EPOLLET wakeups under normal
loads").

And at that point the kernel test robot noticed the performance
refression in the stress-ng.sigio.ops_per_sec case.  So the "Fixes" tag
below is somewhat ad hoc, but it matches when the issue was noticed.

Fix it for good (knock wood) by simply making the kill_fasync() case
separate from the wakeup case.  FASYNC is quite rare, and we clearly
shouldn't even try to use the "avoid unnecessary wakeups" logic for it.

Link: https://lore.kernel.org/lkml/20210824151337.GC27667@xsang-OptiPlex-9020/
Fixes: 3b844826b6c6 ("pipe: avoid unnecessary EPOLLET wakeups under normal loads")
Reported-by: kernel test robot <oliver.sang@intel.com>
Tested-by: Oliver Sang <oliver.sang@intel.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-03 10:09:28 +02:00

1447 lines
35 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* linux/fs/pipe.c
*
* Copyright (C) 1991, 1992, 1999 Linus Torvalds
*/
#include <linux/mm.h>
#include <linux/file.h>
#include <linux/poll.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/log2.h>
#include <linux/mount.h>
#include <linux/pseudo_fs.h>
#include <linux/magic.h>
#include <linux/pipe_fs_i.h>
#include <linux/uio.h>
#include <linux/highmem.h>
#include <linux/pagemap.h>
#include <linux/audit.h>
#include <linux/syscalls.h>
#include <linux/fcntl.h>
#include <linux/memcontrol.h>
#include <linux/watch_queue.h>
#include <linux/uaccess.h>
#include <asm/ioctls.h>
#include "internal.h"
/*
* New pipe buffers will be restricted to this size while the user is exceeding
* their pipe buffer quota. The general pipe use case needs at least two
* buffers: one for data yet to be read, and one for new data. If this is less
* than two, then a write to a non-empty pipe may block even if the pipe is not
* full. This can occur with GNU make jobserver or similar uses of pipes as
* semaphores: multiple processes may be waiting to write tokens back to the
* pipe before reading tokens: https://lore.kernel.org/lkml/1628086770.5rn8p04n6j.none@localhost/.
*
* Users can reduce their pipe buffers with F_SETPIPE_SZ below this at their
* own risk, namely: pipe writes to non-full pipes may block until the pipe is
* emptied.
*/
#define PIPE_MIN_DEF_BUFFERS 2
/*
* The max size that a non-root user is allowed to grow the pipe. Can
* be set by root in /proc/sys/fs/pipe-max-size
*/
unsigned int pipe_max_size = 1048576;
/* Maximum allocatable pages per user. Hard limit is unset by default, soft
* matches default values.
*/
unsigned long pipe_user_pages_hard;
unsigned long pipe_user_pages_soft = PIPE_DEF_BUFFERS * INR_OPEN_CUR;
/*
* We use head and tail indices that aren't masked off, except at the point of
* dereference, but rather they're allowed to wrap naturally. This means there
* isn't a dead spot in the buffer, but the ring has to be a power of two and
* <= 2^31.
* -- David Howells 2019-09-23.
*
* Reads with count = 0 should always return 0.
* -- Julian Bradfield 1999-06-07.
*
* FIFOs and Pipes now generate SIGIO for both readers and writers.
* -- Jeremy Elson <jelson@circlemud.org> 2001-08-16
*
* pipe_read & write cleanup
* -- Manfred Spraul <manfred@colorfullife.com> 2002-05-09
*/
static void pipe_lock_nested(struct pipe_inode_info *pipe, int subclass)
{
if (pipe->files)
mutex_lock_nested(&pipe->mutex, subclass);
}
void pipe_lock(struct pipe_inode_info *pipe)
{
/*
* pipe_lock() nests non-pipe inode locks (for writing to a file)
*/
pipe_lock_nested(pipe, I_MUTEX_PARENT);
}
EXPORT_SYMBOL(pipe_lock);
void pipe_unlock(struct pipe_inode_info *pipe)
{
if (pipe->files)
mutex_unlock(&pipe->mutex);
}
EXPORT_SYMBOL(pipe_unlock);
static inline void __pipe_lock(struct pipe_inode_info *pipe)
{
mutex_lock_nested(&pipe->mutex, I_MUTEX_PARENT);
}
static inline void __pipe_unlock(struct pipe_inode_info *pipe)
{
mutex_unlock(&pipe->mutex);
}
void pipe_double_lock(struct pipe_inode_info *pipe1,
struct pipe_inode_info *pipe2)
{
BUG_ON(pipe1 == pipe2);
if (pipe1 < pipe2) {
pipe_lock_nested(pipe1, I_MUTEX_PARENT);
pipe_lock_nested(pipe2, I_MUTEX_CHILD);
} else {
pipe_lock_nested(pipe2, I_MUTEX_PARENT);
pipe_lock_nested(pipe1, I_MUTEX_CHILD);
}
}
static void anon_pipe_buf_release(struct pipe_inode_info *pipe,
struct pipe_buffer *buf)
{
struct page *page = buf->page;
/*
* If nobody else uses this page, and we don't already have a
* temporary page, let's keep track of it as a one-deep
* allocation cache. (Otherwise just release our reference to it)
*/
if (page_count(page) == 1 && !pipe->tmp_page)
pipe->tmp_page = page;
else
put_page(page);
}
static bool anon_pipe_buf_try_steal(struct pipe_inode_info *pipe,
struct pipe_buffer *buf)
{
struct page *page = buf->page;
if (page_count(page) != 1)
return false;
memcg_kmem_uncharge_page(page, 0);
__SetPageLocked(page);
return true;
}
/**
* generic_pipe_buf_try_steal - attempt to take ownership of a &pipe_buffer
* @pipe: the pipe that the buffer belongs to
* @buf: the buffer to attempt to steal
*
* Description:
* This function attempts to steal the &struct page attached to
* @buf. If successful, this function returns 0 and returns with
* the page locked. The caller may then reuse the page for whatever
* he wishes; the typical use is insertion into a different file
* page cache.
*/
bool generic_pipe_buf_try_steal(struct pipe_inode_info *pipe,
struct pipe_buffer *buf)
{
struct page *page = buf->page;
/*
* A reference of one is golden, that means that the owner of this
* page is the only one holding a reference to it. lock the page
* and return OK.
*/
if (page_count(page) == 1) {
lock_page(page);
return true;
}
return false;
}
EXPORT_SYMBOL(generic_pipe_buf_try_steal);
/**
* generic_pipe_buf_get - get a reference to a &struct pipe_buffer
* @pipe: the pipe that the buffer belongs to
* @buf: the buffer to get a reference to
*
* Description:
* This function grabs an extra reference to @buf. It's used in
* in the tee() system call, when we duplicate the buffers in one
* pipe into another.
*/
bool generic_pipe_buf_get(struct pipe_inode_info *pipe, struct pipe_buffer *buf)
{
return try_get_page(buf->page);
}
EXPORT_SYMBOL(generic_pipe_buf_get);
/**
* generic_pipe_buf_release - put a reference to a &struct pipe_buffer
* @pipe: the pipe that the buffer belongs to
* @buf: the buffer to put a reference to
*
* Description:
* This function releases a reference to @buf.
*/
void generic_pipe_buf_release(struct pipe_inode_info *pipe,
struct pipe_buffer *buf)
{
put_page(buf->page);
}
EXPORT_SYMBOL(generic_pipe_buf_release);
static const struct pipe_buf_operations anon_pipe_buf_ops = {
.release = anon_pipe_buf_release,
.try_steal = anon_pipe_buf_try_steal,
.get = generic_pipe_buf_get,
};
/* Done while waiting without holding the pipe lock - thus the READ_ONCE() */
static inline bool pipe_readable(const struct pipe_inode_info *pipe)
{
unsigned int head = READ_ONCE(pipe->head);
unsigned int tail = READ_ONCE(pipe->tail);
unsigned int writers = READ_ONCE(pipe->writers);
return !pipe_empty(head, tail) || !writers;
}
static ssize_t
pipe_read(struct kiocb *iocb, struct iov_iter *to)
{
size_t total_len = iov_iter_count(to);
struct file *filp = iocb->ki_filp;
struct pipe_inode_info *pipe = filp->private_data;
bool was_full, wake_next_reader = false;
ssize_t ret;
/* Null read succeeds. */
if (unlikely(total_len == 0))
return 0;
ret = 0;
__pipe_lock(pipe);
/*
* We only wake up writers if the pipe was full when we started
* reading in order to avoid unnecessary wakeups.
*
* But when we do wake up writers, we do so using a sync wakeup
* (WF_SYNC), because we want them to get going and generate more
* data for us.
*/
was_full = pipe_full(pipe->head, pipe->tail, pipe->max_usage);
for (;;) {
unsigned int head = pipe->head;
unsigned int tail = pipe->tail;
unsigned int mask = pipe->ring_size - 1;
#ifdef CONFIG_WATCH_QUEUE
if (pipe->note_loss) {
struct watch_notification n;
if (total_len < 8) {
if (ret == 0)
ret = -ENOBUFS;
break;
}
n.type = WATCH_TYPE_META;
n.subtype = WATCH_META_LOSS_NOTIFICATION;
n.info = watch_sizeof(n);
if (copy_to_iter(&n, sizeof(n), to) != sizeof(n)) {
if (ret == 0)
ret = -EFAULT;
break;
}
ret += sizeof(n);
total_len -= sizeof(n);
pipe->note_loss = false;
}
#endif
if (!pipe_empty(head, tail)) {
struct pipe_buffer *buf = &pipe->bufs[tail & mask];
size_t chars = buf->len;
size_t written;
int error;
if (chars > total_len) {
if (buf->flags & PIPE_BUF_FLAG_WHOLE) {
if (ret == 0)
ret = -ENOBUFS;
break;
}
chars = total_len;
}
error = pipe_buf_confirm(pipe, buf);
if (error) {
if (!ret)
ret = error;
break;
}
written = copy_page_to_iter(buf->page, buf->offset, chars, to);
if (unlikely(written < chars)) {
if (!ret)
ret = -EFAULT;
break;
}
ret += chars;
buf->offset += chars;
buf->len -= chars;
/* Was it a packet buffer? Clean up and exit */
if (buf->flags & PIPE_BUF_FLAG_PACKET) {
total_len = chars;
buf->len = 0;
}
if (!buf->len) {
pipe_buf_release(pipe, buf);
spin_lock_irq(&pipe->rd_wait.lock);
#ifdef CONFIG_WATCH_QUEUE
if (buf->flags & PIPE_BUF_FLAG_LOSS)
pipe->note_loss = true;
#endif
tail++;
pipe->tail = tail;
spin_unlock_irq(&pipe->rd_wait.lock);
}
total_len -= chars;
if (!total_len)
break; /* common path: read succeeded */
if (!pipe_empty(head, tail)) /* More to do? */
continue;
}
if (!pipe->writers)
break;
if (ret)
break;
if (filp->f_flags & O_NONBLOCK) {
ret = -EAGAIN;
break;
}
__pipe_unlock(pipe);
/*
* We only get here if we didn't actually read anything.
*
* However, we could have seen (and removed) a zero-sized
* pipe buffer, and might have made space in the buffers
* that way.
*
* You can't make zero-sized pipe buffers by doing an empty
* write (not even in packet mode), but they can happen if
* the writer gets an EFAULT when trying to fill a buffer
* that already got allocated and inserted in the buffer
* array.
*
* So we still need to wake up any pending writers in the
* _very_ unlikely case that the pipe was full, but we got
* no data.
*/
if (unlikely(was_full))
wake_up_interruptible_sync_poll(&pipe->wr_wait, EPOLLOUT | EPOLLWRNORM);
kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT);
/*
* But because we didn't read anything, at this point we can
* just return directly with -ERESTARTSYS if we're interrupted,
* since we've done any required wakeups and there's no need
* to mark anything accessed. And we've dropped the lock.
*/
if (wait_event_interruptible_exclusive(pipe->rd_wait, pipe_readable(pipe)) < 0)
return -ERESTARTSYS;
__pipe_lock(pipe);
was_full = pipe_full(pipe->head, pipe->tail, pipe->max_usage);
wake_next_reader = true;
}
if (pipe_empty(pipe->head, pipe->tail))
wake_next_reader = false;
__pipe_unlock(pipe);
if (was_full)
wake_up_interruptible_sync_poll(&pipe->wr_wait, EPOLLOUT | EPOLLWRNORM);
if (wake_next_reader)
wake_up_interruptible_sync_poll(&pipe->rd_wait, EPOLLIN | EPOLLRDNORM);
kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT);
if (ret > 0)
file_accessed(filp);
return ret;
}
static inline int is_packetized(struct file *file)
{
return (file->f_flags & O_DIRECT) != 0;
}
/* Done while waiting without holding the pipe lock - thus the READ_ONCE() */
static inline bool pipe_writable(const struct pipe_inode_info *pipe)
{
unsigned int head = READ_ONCE(pipe->head);
unsigned int tail = READ_ONCE(pipe->tail);
unsigned int max_usage = READ_ONCE(pipe->max_usage);
return !pipe_full(head, tail, max_usage) ||
!READ_ONCE(pipe->readers);
}
static ssize_t
pipe_write(struct kiocb *iocb, struct iov_iter *from)
{
struct file *filp = iocb->ki_filp;
struct pipe_inode_info *pipe = filp->private_data;
unsigned int head;
ssize_t ret = 0;
size_t total_len = iov_iter_count(from);
ssize_t chars;
bool was_empty = false;
bool wake_next_writer = false;
/* Null write succeeds. */
if (unlikely(total_len == 0))
return 0;
__pipe_lock(pipe);
if (!pipe->readers) {
send_sig(SIGPIPE, current, 0);
ret = -EPIPE;
goto out;
}
#ifdef CONFIG_WATCH_QUEUE
if (pipe->watch_queue) {
ret = -EXDEV;
goto out;
}
#endif
/*
* If it wasn't empty we try to merge new data into
* the last buffer.
*
* That naturally merges small writes, but it also
* page-aligns the rest of the writes for large writes
* spanning multiple pages.
*/
head = pipe->head;
was_empty = pipe_empty(head, pipe->tail);
chars = total_len & (PAGE_SIZE-1);
if (chars && !was_empty) {
unsigned int mask = pipe->ring_size - 1;
struct pipe_buffer *buf = &pipe->bufs[(head - 1) & mask];
int offset = buf->offset + buf->len;
if ((buf->flags & PIPE_BUF_FLAG_CAN_MERGE) &&
offset + chars <= PAGE_SIZE) {
ret = pipe_buf_confirm(pipe, buf);
if (ret)
goto out;
ret = copy_page_from_iter(buf->page, offset, chars, from);
if (unlikely(ret < chars)) {
ret = -EFAULT;
goto out;
}
buf->len += ret;
if (!iov_iter_count(from))
goto out;
}
}
for (;;) {
if (!pipe->readers) {
send_sig(SIGPIPE, current, 0);
if (!ret)
ret = -EPIPE;
break;
}
head = pipe->head;
if (!pipe_full(head, pipe->tail, pipe->max_usage)) {
unsigned int mask = pipe->ring_size - 1;
struct pipe_buffer *buf = &pipe->bufs[head & mask];
struct page *page = pipe->tmp_page;
int copied;
if (!page) {
page = alloc_page(GFP_HIGHUSER | __GFP_ACCOUNT);
if (unlikely(!page)) {
ret = ret ? : -ENOMEM;
break;
}
pipe->tmp_page = page;
}
/* Allocate a slot in the ring in advance and attach an
* empty buffer. If we fault or otherwise fail to use
* it, either the reader will consume it or it'll still
* be there for the next write.
*/
spin_lock_irq(&pipe->rd_wait.lock);
head = pipe->head;
if (pipe_full(head, pipe->tail, pipe->max_usage)) {
spin_unlock_irq(&pipe->rd_wait.lock);
continue;
}
pipe->head = head + 1;
spin_unlock_irq(&pipe->rd_wait.lock);
/* Insert it into the buffer array */
buf = &pipe->bufs[head & mask];
buf->page = page;
buf->ops = &anon_pipe_buf_ops;
buf->offset = 0;
buf->len = 0;
if (is_packetized(filp))
buf->flags = PIPE_BUF_FLAG_PACKET;
else
buf->flags = PIPE_BUF_FLAG_CAN_MERGE;
pipe->tmp_page = NULL;
copied = copy_page_from_iter(page, 0, PAGE_SIZE, from);
if (unlikely(copied < PAGE_SIZE && iov_iter_count(from))) {
if (!ret)
ret = -EFAULT;
break;
}
ret += copied;
buf->offset = 0;
buf->len = copied;
if (!iov_iter_count(from))
break;
}
if (!pipe_full(head, pipe->tail, pipe->max_usage))
continue;
/* Wait for buffer space to become available. */
if (filp->f_flags & O_NONBLOCK) {
if (!ret)
ret = -EAGAIN;
break;
}
if (signal_pending(current)) {
if (!ret)
ret = -ERESTARTSYS;
break;
}
/*
* We're going to release the pipe lock and wait for more
* space. We wake up any readers if necessary, and then
* after waiting we need to re-check whether the pipe
* become empty while we dropped the lock.
*/
__pipe_unlock(pipe);
if (was_empty)
wake_up_interruptible_sync_poll(&pipe->rd_wait, EPOLLIN | EPOLLRDNORM);
kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
wait_event_interruptible_exclusive(pipe->wr_wait, pipe_writable(pipe));
__pipe_lock(pipe);
was_empty = pipe_empty(pipe->head, pipe->tail);
wake_next_writer = true;
}
out:
if (pipe_full(pipe->head, pipe->tail, pipe->max_usage))
wake_next_writer = false;
__pipe_unlock(pipe);
/*
* If we do do a wakeup event, we do a 'sync' wakeup, because we
* want the reader to start processing things asap, rather than
* leave the data pending.
*
* This is particularly important for small writes, because of
* how (for example) the GNU make jobserver uses small writes to
* wake up pending jobs
*
* Epoll nonsensically wants a wakeup whether the pipe
* was already empty or not.
*/
if (was_empty || pipe->poll_usage)
wake_up_interruptible_sync_poll(&pipe->rd_wait, EPOLLIN | EPOLLRDNORM);
kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
if (wake_next_writer)
wake_up_interruptible_sync_poll(&pipe->wr_wait, EPOLLOUT | EPOLLWRNORM);
if (ret > 0 && sb_start_write_trylock(file_inode(filp)->i_sb)) {
int err = file_update_time(filp);
if (err)
ret = err;
sb_end_write(file_inode(filp)->i_sb);
}
return ret;
}
static long pipe_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
struct pipe_inode_info *pipe = filp->private_data;
int count, head, tail, mask;
switch (cmd) {
case FIONREAD:
__pipe_lock(pipe);
count = 0;
head = pipe->head;
tail = pipe->tail;
mask = pipe->ring_size - 1;
while (tail != head) {
count += pipe->bufs[tail & mask].len;
tail++;
}
__pipe_unlock(pipe);
return put_user(count, (int __user *)arg);
#ifdef CONFIG_WATCH_QUEUE
case IOC_WATCH_QUEUE_SET_SIZE: {
int ret;
__pipe_lock(pipe);
ret = watch_queue_set_size(pipe, arg);
__pipe_unlock(pipe);
return ret;
}
case IOC_WATCH_QUEUE_SET_FILTER:
return watch_queue_set_filter(
pipe, (struct watch_notification_filter __user *)arg);
#endif
default:
return -ENOIOCTLCMD;
}
}
/* No kernel lock held - fine */
static __poll_t
pipe_poll(struct file *filp, poll_table *wait)
{
__poll_t mask;
struct pipe_inode_info *pipe = filp->private_data;
unsigned int head, tail;
/* Epoll has some historical nasty semantics, this enables them */
pipe->poll_usage = 1;
/*
* Reading pipe state only -- no need for acquiring the semaphore.
*
* But because this is racy, the code has to add the
* entry to the poll table _first_ ..
*/
if (filp->f_mode & FMODE_READ)
poll_wait(filp, &pipe->rd_wait, wait);
if (filp->f_mode & FMODE_WRITE)
poll_wait(filp, &pipe->wr_wait, wait);
/*
* .. and only then can you do the racy tests. That way,
* if something changes and you got it wrong, the poll
* table entry will wake you up and fix it.
*/
head = READ_ONCE(pipe->head);
tail = READ_ONCE(pipe->tail);
mask = 0;
if (filp->f_mode & FMODE_READ) {
if (!pipe_empty(head, tail))
mask |= EPOLLIN | EPOLLRDNORM;
if (!pipe->writers && filp->f_version != pipe->w_counter)
mask |= EPOLLHUP;
}
if (filp->f_mode & FMODE_WRITE) {
if (!pipe_full(head, tail, pipe->max_usage))
mask |= EPOLLOUT | EPOLLWRNORM;
/*
* Most Unices do not set EPOLLERR for FIFOs but on Linux they
* behave exactly like pipes for poll().
*/
if (!pipe->readers)
mask |= EPOLLERR;
}
return mask;
}
static void put_pipe_info(struct inode *inode, struct pipe_inode_info *pipe)
{
int kill = 0;
spin_lock(&inode->i_lock);
if (!--pipe->files) {
inode->i_pipe = NULL;
kill = 1;
}
spin_unlock(&inode->i_lock);
if (kill)
free_pipe_info(pipe);
}
static int
pipe_release(struct inode *inode, struct file *file)
{
struct pipe_inode_info *pipe = file->private_data;
__pipe_lock(pipe);
if (file->f_mode & FMODE_READ)
pipe->readers--;
if (file->f_mode & FMODE_WRITE)
pipe->writers--;
/* Was that the last reader or writer, but not the other side? */
if (!pipe->readers != !pipe->writers) {
wake_up_interruptible_all(&pipe->rd_wait);
wake_up_interruptible_all(&pipe->wr_wait);
kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT);
}
__pipe_unlock(pipe);
put_pipe_info(inode, pipe);
return 0;
}
static int
pipe_fasync(int fd, struct file *filp, int on)
{
struct pipe_inode_info *pipe = filp->private_data;
int retval = 0;
__pipe_lock(pipe);
if (filp->f_mode & FMODE_READ)
retval = fasync_helper(fd, filp, on, &pipe->fasync_readers);
if ((filp->f_mode & FMODE_WRITE) && retval >= 0) {
retval = fasync_helper(fd, filp, on, &pipe->fasync_writers);
if (retval < 0 && (filp->f_mode & FMODE_READ))
/* this can happen only if on == T */
fasync_helper(-1, filp, 0, &pipe->fasync_readers);
}
__pipe_unlock(pipe);
return retval;
}
unsigned long account_pipe_buffers(struct user_struct *user,
unsigned long old, unsigned long new)
{
return atomic_long_add_return(new - old, &user->pipe_bufs);
}
bool too_many_pipe_buffers_soft(unsigned long user_bufs)
{
unsigned long soft_limit = READ_ONCE(pipe_user_pages_soft);
return soft_limit && user_bufs > soft_limit;
}
bool too_many_pipe_buffers_hard(unsigned long user_bufs)
{
unsigned long hard_limit = READ_ONCE(pipe_user_pages_hard);
return hard_limit && user_bufs > hard_limit;
}
bool pipe_is_unprivileged_user(void)
{
return !capable(CAP_SYS_RESOURCE) && !capable(CAP_SYS_ADMIN);
}
struct pipe_inode_info *alloc_pipe_info(void)
{
struct pipe_inode_info *pipe;
unsigned long pipe_bufs = PIPE_DEF_BUFFERS;
struct user_struct *user = get_current_user();
unsigned long user_bufs;
unsigned int max_size = READ_ONCE(pipe_max_size);
pipe = kzalloc(sizeof(struct pipe_inode_info), GFP_KERNEL_ACCOUNT);
if (pipe == NULL)
goto out_free_uid;
if (pipe_bufs * PAGE_SIZE > max_size && !capable(CAP_SYS_RESOURCE))
pipe_bufs = max_size >> PAGE_SHIFT;
user_bufs = account_pipe_buffers(user, 0, pipe_bufs);
if (too_many_pipe_buffers_soft(user_bufs) && pipe_is_unprivileged_user()) {
user_bufs = account_pipe_buffers(user, pipe_bufs, PIPE_MIN_DEF_BUFFERS);
pipe_bufs = PIPE_MIN_DEF_BUFFERS;
}
if (too_many_pipe_buffers_hard(user_bufs) && pipe_is_unprivileged_user())
goto out_revert_acct;
pipe->bufs = kcalloc(pipe_bufs, sizeof(struct pipe_buffer),
GFP_KERNEL_ACCOUNT);
if (pipe->bufs) {
init_waitqueue_head(&pipe->rd_wait);
init_waitqueue_head(&pipe->wr_wait);
pipe->r_counter = pipe->w_counter = 1;
pipe->max_usage = pipe_bufs;
pipe->ring_size = pipe_bufs;
pipe->nr_accounted = pipe_bufs;
pipe->user = user;
mutex_init(&pipe->mutex);
return pipe;
}
out_revert_acct:
(void) account_pipe_buffers(user, pipe_bufs, 0);
kfree(pipe);
out_free_uid:
free_uid(user);
return NULL;
}
void free_pipe_info(struct pipe_inode_info *pipe)
{
int i;
#ifdef CONFIG_WATCH_QUEUE
if (pipe->watch_queue) {
watch_queue_clear(pipe->watch_queue);
put_watch_queue(pipe->watch_queue);
}
#endif
(void) account_pipe_buffers(pipe->user, pipe->nr_accounted, 0);
free_uid(pipe->user);
for (i = 0; i < pipe->ring_size; i++) {
struct pipe_buffer *buf = pipe->bufs + i;
if (buf->ops)
pipe_buf_release(pipe, buf);
}
if (pipe->tmp_page)
__free_page(pipe->tmp_page);
kfree(pipe->bufs);
kfree(pipe);
}
static struct vfsmount *pipe_mnt __read_mostly;
/*
* pipefs_dname() is called from d_path().
*/
static char *pipefs_dname(struct dentry *dentry, char *buffer, int buflen)
{
return dynamic_dname(dentry, buffer, buflen, "pipe:[%lu]",
d_inode(dentry)->i_ino);
}
static const struct dentry_operations pipefs_dentry_operations = {
.d_dname = pipefs_dname,
};
static struct inode * get_pipe_inode(void)
{
struct inode *inode = new_inode_pseudo(pipe_mnt->mnt_sb);
struct pipe_inode_info *pipe;
if (!inode)
goto fail_inode;
inode->i_ino = get_next_ino();
pipe = alloc_pipe_info();
if (!pipe)
goto fail_iput;
inode->i_pipe = pipe;
pipe->files = 2;
pipe->readers = pipe->writers = 1;
inode->i_fop = &pipefifo_fops;
/*
* Mark the inode dirty from the very beginning,
* that way it will never be moved to the dirty
* list because "mark_inode_dirty()" will think
* that it already _is_ on the dirty list.
*/
inode->i_state = I_DIRTY;
inode->i_mode = S_IFIFO | S_IRUSR | S_IWUSR;
inode->i_uid = current_fsuid();
inode->i_gid = current_fsgid();
inode->i_atime = inode->i_mtime = inode->i_ctime = current_time(inode);
return inode;
fail_iput:
iput(inode);
fail_inode:
return NULL;
}
int create_pipe_files(struct file **res, int flags)
{
struct inode *inode = get_pipe_inode();
struct file *f;
int error;
if (!inode)
return -ENFILE;
if (flags & O_NOTIFICATION_PIPE) {
error = watch_queue_init(inode->i_pipe);
if (error) {
free_pipe_info(inode->i_pipe);
iput(inode);
return error;
}
}
f = alloc_file_pseudo(inode, pipe_mnt, "",
O_WRONLY | (flags & (O_NONBLOCK | O_DIRECT)),
&pipefifo_fops);
if (IS_ERR(f)) {
free_pipe_info(inode->i_pipe);
iput(inode);
return PTR_ERR(f);
}
f->private_data = inode->i_pipe;
res[0] = alloc_file_clone(f, O_RDONLY | (flags & O_NONBLOCK),
&pipefifo_fops);
if (IS_ERR(res[0])) {
put_pipe_info(inode, inode->i_pipe);
fput(f);
return PTR_ERR(res[0]);
}
res[0]->private_data = inode->i_pipe;
res[1] = f;
stream_open(inode, res[0]);
stream_open(inode, res[1]);
return 0;
}
static int __do_pipe_flags(int *fd, struct file **files, int flags)
{
int error;
int fdw, fdr;
if (flags & ~(O_CLOEXEC | O_NONBLOCK | O_DIRECT | O_NOTIFICATION_PIPE))
return -EINVAL;
error = create_pipe_files(files, flags);
if (error)
return error;
error = get_unused_fd_flags(flags);
if (error < 0)
goto err_read_pipe;
fdr = error;
error = get_unused_fd_flags(flags);
if (error < 0)
goto err_fdr;
fdw = error;
audit_fd_pair(fdr, fdw);
fd[0] = fdr;
fd[1] = fdw;
return 0;
err_fdr:
put_unused_fd(fdr);
err_read_pipe:
fput(files[0]);
fput(files[1]);
return error;
}
int do_pipe_flags(int *fd, int flags)
{
struct file *files[2];
int error = __do_pipe_flags(fd, files, flags);
if (!error) {
fd_install(fd[0], files[0]);
fd_install(fd[1], files[1]);
}
return error;
}
/*
* sys_pipe() is the normal C calling standard for creating
* a pipe. It's not the way Unix traditionally does this, though.
*/
static int do_pipe2(int __user *fildes, int flags)
{
struct file *files[2];
int fd[2];
int error;
error = __do_pipe_flags(fd, files, flags);
if (!error) {
if (unlikely(copy_to_user(fildes, fd, sizeof(fd)))) {
fput(files[0]);
fput(files[1]);
put_unused_fd(fd[0]);
put_unused_fd(fd[1]);
error = -EFAULT;
} else {
fd_install(fd[0], files[0]);
fd_install(fd[1], files[1]);
}
}
return error;
}
SYSCALL_DEFINE2(pipe2, int __user *, fildes, int, flags)
{
return do_pipe2(fildes, flags);
}
SYSCALL_DEFINE1(pipe, int __user *, fildes)
{
return do_pipe2(fildes, 0);
}
/*
* This is the stupid "wait for pipe to be readable or writable"
* model.
*
* See pipe_read/write() for the proper kind of exclusive wait,
* but that requires that we wake up any other readers/writers
* if we then do not end up reading everything (ie the whole
* "wake_next_reader/writer" logic in pipe_read/write()).
*/
void pipe_wait_readable(struct pipe_inode_info *pipe)
{
pipe_unlock(pipe);
wait_event_interruptible(pipe->rd_wait, pipe_readable(pipe));
pipe_lock(pipe);
}
void pipe_wait_writable(struct pipe_inode_info *pipe)
{
pipe_unlock(pipe);
wait_event_interruptible(pipe->wr_wait, pipe_writable(pipe));
pipe_lock(pipe);
}
/*
* This depends on both the wait (here) and the wakeup (wake_up_partner)
* holding the pipe lock, so "*cnt" is stable and we know a wakeup cannot
* race with the count check and waitqueue prep.
*
* Normally in order to avoid races, you'd do the prepare_to_wait() first,
* then check the condition you're waiting for, and only then sleep. But
* because of the pipe lock, we can check the condition before being on
* the wait queue.
*
* We use the 'rd_wait' waitqueue for pipe partner waiting.
*/
static int wait_for_partner(struct pipe_inode_info *pipe, unsigned int *cnt)
{
DEFINE_WAIT(rdwait);
int cur = *cnt;
while (cur == *cnt) {
prepare_to_wait(&pipe->rd_wait, &rdwait, TASK_INTERRUPTIBLE);
pipe_unlock(pipe);
schedule();
finish_wait(&pipe->rd_wait, &rdwait);
pipe_lock(pipe);
if (signal_pending(current))
break;
}
return cur == *cnt ? -ERESTARTSYS : 0;
}
static void wake_up_partner(struct pipe_inode_info *pipe)
{
wake_up_interruptible_all(&pipe->rd_wait);
}
static int fifo_open(struct inode *inode, struct file *filp)
{
struct pipe_inode_info *pipe;
bool is_pipe = inode->i_sb->s_magic == PIPEFS_MAGIC;
int ret;
filp->f_version = 0;
spin_lock(&inode->i_lock);
if (inode->i_pipe) {
pipe = inode->i_pipe;
pipe->files++;
spin_unlock(&inode->i_lock);
} else {
spin_unlock(&inode->i_lock);
pipe = alloc_pipe_info();
if (!pipe)
return -ENOMEM;
pipe->files = 1;
spin_lock(&inode->i_lock);
if (unlikely(inode->i_pipe)) {
inode->i_pipe->files++;
spin_unlock(&inode->i_lock);
free_pipe_info(pipe);
pipe = inode->i_pipe;
} else {
inode->i_pipe = pipe;
spin_unlock(&inode->i_lock);
}
}
filp->private_data = pipe;
/* OK, we have a pipe and it's pinned down */
__pipe_lock(pipe);
/* We can only do regular read/write on fifos */
stream_open(inode, filp);
switch (filp->f_mode & (FMODE_READ | FMODE_WRITE)) {
case FMODE_READ:
/*
* O_RDONLY
* POSIX.1 says that O_NONBLOCK means return with the FIFO
* opened, even when there is no process writing the FIFO.
*/
pipe->r_counter++;
if (pipe->readers++ == 0)
wake_up_partner(pipe);
if (!is_pipe && !pipe->writers) {
if ((filp->f_flags & O_NONBLOCK)) {
/* suppress EPOLLHUP until we have
* seen a writer */
filp->f_version = pipe->w_counter;
} else {
if (wait_for_partner(pipe, &pipe->w_counter))
goto err_rd;
}
}
break;
case FMODE_WRITE:
/*
* O_WRONLY
* POSIX.1 says that O_NONBLOCK means return -1 with
* errno=ENXIO when there is no process reading the FIFO.
*/
ret = -ENXIO;
if (!is_pipe && (filp->f_flags & O_NONBLOCK) && !pipe->readers)
goto err;
pipe->w_counter++;
if (!pipe->writers++)
wake_up_partner(pipe);
if (!is_pipe && !pipe->readers) {
if (wait_for_partner(pipe, &pipe->r_counter))
goto err_wr;
}
break;
case FMODE_READ | FMODE_WRITE:
/*
* O_RDWR
* POSIX.1 leaves this case "undefined" when O_NONBLOCK is set.
* This implementation will NEVER block on a O_RDWR open, since
* the process can at least talk to itself.
*/
pipe->readers++;
pipe->writers++;
pipe->r_counter++;
pipe->w_counter++;
if (pipe->readers == 1 || pipe->writers == 1)
wake_up_partner(pipe);
break;
default:
ret = -EINVAL;
goto err;
}
/* Ok! */
__pipe_unlock(pipe);
return 0;
err_rd:
if (!--pipe->readers)
wake_up_interruptible(&pipe->wr_wait);
ret = -ERESTARTSYS;
goto err;
err_wr:
if (!--pipe->writers)
wake_up_interruptible_all(&pipe->rd_wait);
ret = -ERESTARTSYS;
goto err;
err:
__pipe_unlock(pipe);
put_pipe_info(inode, pipe);
return ret;
}
const struct file_operations pipefifo_fops = {
.open = fifo_open,
.llseek = no_llseek,
.read_iter = pipe_read,
.write_iter = pipe_write,
.poll = pipe_poll,
.unlocked_ioctl = pipe_ioctl,
.release = pipe_release,
.fasync = pipe_fasync,
.splice_write = iter_file_splice_write,
};
/*
* Currently we rely on the pipe array holding a power-of-2 number
* of pages. Returns 0 on error.
*/
unsigned int round_pipe_size(unsigned long size)
{
if (size > (1U << 31))
return 0;
/* Minimum pipe size, as required by POSIX */
if (size < PAGE_SIZE)
return PAGE_SIZE;
return roundup_pow_of_two(size);
}
/*
* Resize the pipe ring to a number of slots.
*/
int pipe_resize_ring(struct pipe_inode_info *pipe, unsigned int nr_slots)
{
struct pipe_buffer *bufs;
unsigned int head, tail, mask, n;
/*
* We can shrink the pipe, if arg is greater than the ring occupancy.
* Since we don't expect a lot of shrink+grow operations, just free and
* allocate again like we would do for growing. If the pipe currently
* contains more buffers than arg, then return busy.
*/
mask = pipe->ring_size - 1;
head = pipe->head;
tail = pipe->tail;
n = pipe_occupancy(pipe->head, pipe->tail);
if (nr_slots < n)
return -EBUSY;
bufs = kcalloc(nr_slots, sizeof(*bufs),
GFP_KERNEL_ACCOUNT | __GFP_NOWARN);
if (unlikely(!bufs))
return -ENOMEM;
/*
* The pipe array wraps around, so just start the new one at zero
* and adjust the indices.
*/
if (n > 0) {
unsigned int h = head & mask;
unsigned int t = tail & mask;
if (h > t) {
memcpy(bufs, pipe->bufs + t,
n * sizeof(struct pipe_buffer));
} else {
unsigned int tsize = pipe->ring_size - t;
if (h > 0)
memcpy(bufs + tsize, pipe->bufs,
h * sizeof(struct pipe_buffer));
memcpy(bufs, pipe->bufs + t,
tsize * sizeof(struct pipe_buffer));
}
}
head = n;
tail = 0;
kfree(pipe->bufs);
pipe->bufs = bufs;
pipe->ring_size = nr_slots;
if (pipe->max_usage > nr_slots)
pipe->max_usage = nr_slots;
pipe->tail = tail;
pipe->head = head;
/* This might have made more room for writers */
wake_up_interruptible(&pipe->wr_wait);
return 0;
}
/*
* Allocate a new array of pipe buffers and copy the info over. Returns the
* pipe size if successful, or return -ERROR on error.
*/
static long pipe_set_size(struct pipe_inode_info *pipe, unsigned long arg)
{
unsigned long user_bufs;
unsigned int nr_slots, size;
long ret = 0;
#ifdef CONFIG_WATCH_QUEUE
if (pipe->watch_queue)
return -EBUSY;
#endif
size = round_pipe_size(arg);
nr_slots = size >> PAGE_SHIFT;
if (!nr_slots)
return -EINVAL;
/*
* If trying to increase the pipe capacity, check that an
* unprivileged user is not trying to exceed various limits
* (soft limit check here, hard limit check just below).
* Decreasing the pipe capacity is always permitted, even
* if the user is currently over a limit.
*/
if (nr_slots > pipe->max_usage &&
size > pipe_max_size && !capable(CAP_SYS_RESOURCE))
return -EPERM;
user_bufs = account_pipe_buffers(pipe->user, pipe->nr_accounted, nr_slots);
if (nr_slots > pipe->max_usage &&
(too_many_pipe_buffers_hard(user_bufs) ||
too_many_pipe_buffers_soft(user_bufs)) &&
pipe_is_unprivileged_user()) {
ret = -EPERM;
goto out_revert_acct;
}
ret = pipe_resize_ring(pipe, nr_slots);
if (ret < 0)
goto out_revert_acct;
pipe->max_usage = nr_slots;
pipe->nr_accounted = nr_slots;
return pipe->max_usage * PAGE_SIZE;
out_revert_acct:
(void) account_pipe_buffers(pipe->user, nr_slots, pipe->nr_accounted);
return ret;
}
/*
* After the inode slimming patch, i_pipe/i_bdev/i_cdev share the same
* location, so checking ->i_pipe is not enough to verify that this is a
* pipe.
*/
struct pipe_inode_info *get_pipe_info(struct file *file, bool for_splice)
{
struct pipe_inode_info *pipe = file->private_data;
if (file->f_op != &pipefifo_fops || !pipe)
return NULL;
#ifdef CONFIG_WATCH_QUEUE
if (for_splice && pipe->watch_queue)
return NULL;
#endif
return pipe;
}
long pipe_fcntl(struct file *file, unsigned int cmd, unsigned long arg)
{
struct pipe_inode_info *pipe;
long ret;
pipe = get_pipe_info(file, false);
if (!pipe)
return -EBADF;
__pipe_lock(pipe);
switch (cmd) {
case F_SETPIPE_SZ:
ret = pipe_set_size(pipe, arg);
break;
case F_GETPIPE_SZ:
ret = pipe->max_usage * PAGE_SIZE;
break;
default:
ret = -EINVAL;
break;
}
__pipe_unlock(pipe);
return ret;
}
static const struct super_operations pipefs_ops = {
.destroy_inode = free_inode_nonrcu,
.statfs = simple_statfs,
};
/*
* pipefs should _never_ be mounted by userland - too much of security hassle,
* no real gain from having the whole whorehouse mounted. So we don't need
* any operations on the root directory. However, we need a non-trivial
* d_name - pipe: will go nicely and kill the special-casing in procfs.
*/
static int pipefs_init_fs_context(struct fs_context *fc)
{
struct pseudo_fs_context *ctx = init_pseudo(fc, PIPEFS_MAGIC);
if (!ctx)
return -ENOMEM;
ctx->ops = &pipefs_ops;
ctx->dops = &pipefs_dentry_operations;
return 0;
}
static struct file_system_type pipe_fs_type = {
.name = "pipefs",
.init_fs_context = pipefs_init_fs_context,
.kill_sb = kill_anon_super,
};
static int __init init_pipe_fs(void)
{
int err = register_filesystem(&pipe_fs_type);
if (!err) {
pipe_mnt = kern_mount(&pipe_fs_type);
if (IS_ERR(pipe_mnt)) {
err = PTR_ERR(pipe_mnt);
unregister_filesystem(&pipe_fs_type);
}
}
return err;
}
fs_initcall(init_pipe_fs);