kernel_optimize_test/drivers/spi/spi_s3c24xx.c
Ben Dooks 1915297566 spi_s3c24xx: fix transfer setup code
Since the changes to the bitbang driver, there is the possibility we will
be called with either the speed_hz or bpw values zero.  We take these to
mean that the default values (8 bits per word, or maximum bus speed).

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-18 16:31:13 -07:00

475 lines
10 KiB
C

/* linux/drivers/spi/spi_s3c24xx.c
*
* Copyright (c) 2006 Ben Dooks
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
#include <asm/io.h>
#include <asm/dma.h>
#include <mach/hardware.h>
#include <plat/regs-spi.h>
#include <mach/spi.h>
struct s3c24xx_spi {
/* bitbang has to be first */
struct spi_bitbang bitbang;
struct completion done;
void __iomem *regs;
int irq;
int len;
int count;
void (*set_cs)(struct s3c2410_spi_info *spi,
int cs, int pol);
/* data buffers */
const unsigned char *tx;
unsigned char *rx;
struct clk *clk;
struct resource *ioarea;
struct spi_master *master;
struct spi_device *curdev;
struct device *dev;
struct s3c2410_spi_info *pdata;
};
#define SPCON_DEFAULT (S3C2410_SPCON_MSTR | S3C2410_SPCON_SMOD_INT)
#define SPPIN_DEFAULT (S3C2410_SPPIN_KEEP)
static inline struct s3c24xx_spi *to_hw(struct spi_device *sdev)
{
return spi_master_get_devdata(sdev->master);
}
static void s3c24xx_spi_gpiocs(struct s3c2410_spi_info *spi, int cs, int pol)
{
gpio_set_value(spi->pin_cs, pol);
}
static void s3c24xx_spi_chipsel(struct spi_device *spi, int value)
{
struct s3c24xx_spi *hw = to_hw(spi);
unsigned int cspol = spi->mode & SPI_CS_HIGH ? 1 : 0;
unsigned int spcon;
switch (value) {
case BITBANG_CS_INACTIVE:
hw->set_cs(hw->pdata, spi->chip_select, cspol^1);
break;
case BITBANG_CS_ACTIVE:
spcon = readb(hw->regs + S3C2410_SPCON);
if (spi->mode & SPI_CPHA)
spcon |= S3C2410_SPCON_CPHA_FMTB;
else
spcon &= ~S3C2410_SPCON_CPHA_FMTB;
if (spi->mode & SPI_CPOL)
spcon |= S3C2410_SPCON_CPOL_HIGH;
else
spcon &= ~S3C2410_SPCON_CPOL_HIGH;
spcon |= S3C2410_SPCON_ENSCK;
/* write new configration */
writeb(spcon, hw->regs + S3C2410_SPCON);
hw->set_cs(hw->pdata, spi->chip_select, cspol);
break;
}
}
static int s3c24xx_spi_setupxfer(struct spi_device *spi,
struct spi_transfer *t)
{
struct s3c24xx_spi *hw = to_hw(spi);
unsigned int bpw;
unsigned int hz;
unsigned int div;
unsigned long clk;
bpw = t ? t->bits_per_word : spi->bits_per_word;
hz = t ? t->speed_hz : spi->max_speed_hz;
if (!bpw)
bpw = 8;
if (!hz)
hz = spi->max_speed_hz;
if (bpw != 8) {
dev_err(&spi->dev, "invalid bits-per-word (%d)\n", bpw);
return -EINVAL;
}
clk = clk_get_rate(hw->clk);
div = DIV_ROUND_UP(clk, hz * 2) - 1;
if (div > 255)
div = 255;
dev_dbg(&spi->dev, "setting pre-scaler to %d (wanted %d, got %ld)\n",
div, hz, clk / (2 * (div + 1)));
writeb(div, hw->regs + S3C2410_SPPRE);
spin_lock(&hw->bitbang.lock);
if (!hw->bitbang.busy) {
hw->bitbang.chipselect(spi, BITBANG_CS_INACTIVE);
/* need to ndelay for 0.5 clocktick ? */
}
spin_unlock(&hw->bitbang.lock);
return 0;
}
static int s3c24xx_spi_setup(struct spi_device *spi)
{
int ret;
ret = s3c24xx_spi_setupxfer(spi, NULL);
if (ret < 0) {
dev_err(&spi->dev, "setupxfer returned %d\n", ret);
return ret;
}
return 0;
}
static inline unsigned int hw_txbyte(struct s3c24xx_spi *hw, int count)
{
return hw->tx ? hw->tx[count] : 0;
}
static int s3c24xx_spi_txrx(struct spi_device *spi, struct spi_transfer *t)
{
struct s3c24xx_spi *hw = to_hw(spi);
dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n",
t->tx_buf, t->rx_buf, t->len);
hw->tx = t->tx_buf;
hw->rx = t->rx_buf;
hw->len = t->len;
hw->count = 0;
init_completion(&hw->done);
/* send the first byte */
writeb(hw_txbyte(hw, 0), hw->regs + S3C2410_SPTDAT);
wait_for_completion(&hw->done);
return hw->count;
}
static irqreturn_t s3c24xx_spi_irq(int irq, void *dev)
{
struct s3c24xx_spi *hw = dev;
unsigned int spsta = readb(hw->regs + S3C2410_SPSTA);
unsigned int count = hw->count;
if (spsta & S3C2410_SPSTA_DCOL) {
dev_dbg(hw->dev, "data-collision\n");
complete(&hw->done);
goto irq_done;
}
if (!(spsta & S3C2410_SPSTA_READY)) {
dev_dbg(hw->dev, "spi not ready for tx?\n");
complete(&hw->done);
goto irq_done;
}
hw->count++;
if (hw->rx)
hw->rx[count] = readb(hw->regs + S3C2410_SPRDAT);
count++;
if (count < hw->len)
writeb(hw_txbyte(hw, count), hw->regs + S3C2410_SPTDAT);
else
complete(&hw->done);
irq_done:
return IRQ_HANDLED;
}
static void s3c24xx_spi_initialsetup(struct s3c24xx_spi *hw)
{
/* for the moment, permanently enable the clock */
clk_enable(hw->clk);
/* program defaults into the registers */
writeb(0xff, hw->regs + S3C2410_SPPRE);
writeb(SPPIN_DEFAULT, hw->regs + S3C2410_SPPIN);
writeb(SPCON_DEFAULT, hw->regs + S3C2410_SPCON);
if (hw->pdata) {
if (hw->set_cs == s3c24xx_spi_gpiocs)
gpio_direction_output(hw->pdata->pin_cs, 1);
if (hw->pdata->gpio_setup)
hw->pdata->gpio_setup(hw->pdata, 1);
}
}
static int __init s3c24xx_spi_probe(struct platform_device *pdev)
{
struct s3c2410_spi_info *pdata;
struct s3c24xx_spi *hw;
struct spi_master *master;
struct resource *res;
int err = 0;
master = spi_alloc_master(&pdev->dev, sizeof(struct s3c24xx_spi));
if (master == NULL) {
dev_err(&pdev->dev, "No memory for spi_master\n");
err = -ENOMEM;
goto err_nomem;
}
hw = spi_master_get_devdata(master);
memset(hw, 0, sizeof(struct s3c24xx_spi));
hw->master = spi_master_get(master);
hw->pdata = pdata = pdev->dev.platform_data;
hw->dev = &pdev->dev;
if (pdata == NULL) {
dev_err(&pdev->dev, "No platform data supplied\n");
err = -ENOENT;
goto err_no_pdata;
}
platform_set_drvdata(pdev, hw);
init_completion(&hw->done);
/* setup the master state. */
/* the spi->mode bits understood by this driver: */
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
master->num_chipselect = hw->pdata->num_cs;
master->bus_num = pdata->bus_num;
/* setup the state for the bitbang driver */
hw->bitbang.master = hw->master;
hw->bitbang.setup_transfer = s3c24xx_spi_setupxfer;
hw->bitbang.chipselect = s3c24xx_spi_chipsel;
hw->bitbang.txrx_bufs = s3c24xx_spi_txrx;
hw->bitbang.master->setup = s3c24xx_spi_setup;
dev_dbg(hw->dev, "bitbang at %p\n", &hw->bitbang);
/* find and map our resources */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res == NULL) {
dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n");
err = -ENOENT;
goto err_no_iores;
}
hw->ioarea = request_mem_region(res->start, (res->end - res->start)+1,
pdev->name);
if (hw->ioarea == NULL) {
dev_err(&pdev->dev, "Cannot reserve region\n");
err = -ENXIO;
goto err_no_iores;
}
hw->regs = ioremap(res->start, (res->end - res->start)+1);
if (hw->regs == NULL) {
dev_err(&pdev->dev, "Cannot map IO\n");
err = -ENXIO;
goto err_no_iomap;
}
hw->irq = platform_get_irq(pdev, 0);
if (hw->irq < 0) {
dev_err(&pdev->dev, "No IRQ specified\n");
err = -ENOENT;
goto err_no_irq;
}
err = request_irq(hw->irq, s3c24xx_spi_irq, 0, pdev->name, hw);
if (err) {
dev_err(&pdev->dev, "Cannot claim IRQ\n");
goto err_no_irq;
}
hw->clk = clk_get(&pdev->dev, "spi");
if (IS_ERR(hw->clk)) {
dev_err(&pdev->dev, "No clock for device\n");
err = PTR_ERR(hw->clk);
goto err_no_clk;
}
/* setup any gpio we can */
if (!pdata->set_cs) {
if (pdata->pin_cs < 0) {
dev_err(&pdev->dev, "No chipselect pin\n");
goto err_register;
}
err = gpio_request(pdata->pin_cs, dev_name(&pdev->dev));
if (err) {
dev_err(&pdev->dev, "Failed to get gpio for cs\n");
goto err_register;
}
hw->set_cs = s3c24xx_spi_gpiocs;
gpio_direction_output(pdata->pin_cs, 1);
} else
hw->set_cs = pdata->set_cs;
s3c24xx_spi_initialsetup(hw);
/* register our spi controller */
err = spi_bitbang_start(&hw->bitbang);
if (err) {
dev_err(&pdev->dev, "Failed to register SPI master\n");
goto err_register;
}
return 0;
err_register:
if (hw->set_cs == s3c24xx_spi_gpiocs)
gpio_free(pdata->pin_cs);
clk_disable(hw->clk);
clk_put(hw->clk);
err_no_clk:
free_irq(hw->irq, hw);
err_no_irq:
iounmap(hw->regs);
err_no_iomap:
release_resource(hw->ioarea);
kfree(hw->ioarea);
err_no_iores:
err_no_pdata:
spi_master_put(hw->master);;
err_nomem:
return err;
}
static int __exit s3c24xx_spi_remove(struct platform_device *dev)
{
struct s3c24xx_spi *hw = platform_get_drvdata(dev);
platform_set_drvdata(dev, NULL);
spi_unregister_master(hw->master);
clk_disable(hw->clk);
clk_put(hw->clk);
free_irq(hw->irq, hw);
iounmap(hw->regs);
if (hw->set_cs == s3c24xx_spi_gpiocs)
gpio_free(hw->pdata->pin_cs);
release_resource(hw->ioarea);
kfree(hw->ioarea);
spi_master_put(hw->master);
return 0;
}
#ifdef CONFIG_PM
static int s3c24xx_spi_suspend(struct platform_device *pdev, pm_message_t msg)
{
struct s3c24xx_spi *hw = platform_get_drvdata(pdev);
if (hw->pdata && hw->pdata->gpio_setup)
hw->pdata->gpio_setup(hw->pdata, 0);
clk_disable(hw->clk);
return 0;
}
static int s3c24xx_spi_resume(struct platform_device *pdev)
{
struct s3c24xx_spi *hw = platform_get_drvdata(pdev);
s3c24xx_spi_initialsetup(hw);
return 0;
}
#else
#define s3c24xx_spi_suspend NULL
#define s3c24xx_spi_resume NULL
#endif
MODULE_ALIAS("platform:s3c2410-spi");
static struct platform_driver s3c24xx_spi_driver = {
.remove = __exit_p(s3c24xx_spi_remove),
.suspend = s3c24xx_spi_suspend,
.resume = s3c24xx_spi_resume,
.driver = {
.name = "s3c2410-spi",
.owner = THIS_MODULE,
},
};
static int __init s3c24xx_spi_init(void)
{
return platform_driver_probe(&s3c24xx_spi_driver, s3c24xx_spi_probe);
}
static void __exit s3c24xx_spi_exit(void)
{
platform_driver_unregister(&s3c24xx_spi_driver);
}
module_init(s3c24xx_spi_init);
module_exit(s3c24xx_spi_exit);
MODULE_DESCRIPTION("S3C24XX SPI Driver");
MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
MODULE_LICENSE("GPL");