AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
8f34f4cea3
kernel_optimize_test/drivers/scsi
History
James Smart 8f34f4cea3 [SCSI] lpfc 8.3.0 : Fix issue with assumed Interrupt Enable Block support 
The phba hbq_get address was setup before the HBA reported support for
Interrupt Enable Block (INB).  This caused loopback tests to fail
after all HBQs had been used once.  Moved setting of hba_get until
after config port mailbox command completes.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29 11:24:26 -06:00
..
aacraid [SCSI] Clean up my email address and use a single standard address for everything 2008-12-29 11:24:12 -06:00
aic7xxx [SCSI] aic7xxx: Take the LED out of diagnostic mode on PM resume 2008-10-23 11:42:16 -05:00
aic7xxx_old
aic94xx
arcmsr [SCSI] advansys, arcmsr, ipr, nsp32, qla1280, stex: use pci_ioremap_bar() 2008-12-29 11:24:11 -06:00
arm
device_handler [SCSI] scsi_dh_rdac: Add LSI vendor and product ids in rdac device list 2008-12-29 11:24:17 -06:00
dpt
ibmvscsi [SCSI] ibmvfc: Fix errors due to inconsistent command data 2008-12-29 11:24:24 -06:00
libsas
lpfc [SCSI] lpfc 8.3.0 : Fix issue with assumed Interrupt Enable Block support 2008-12-29 11:24:26 -06:00
megaraid [SCSI] megaraid_sas: switch to block timeout 2008-12-01 11:15:55 -06:00
pcmcia Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6 2008-10-13 14:12:40 -07:00
qla2xxx [SCSI] qla2xxx: Code changes for vport bus reset 2008-12-29 11:24:19 -06:00
qla4xxx drivers: replace NIPQUAD() 2008-10-31 00:56:00 -07:00
sym53c8xx_2
.gitignore
3w-9xxx.c [SCSI] 3w-9xxx: remove unnecessary local_irq_save/restore for scsi sg copy API 2008-10-23 11:42:18 -05:00
3w-9xxx.h
3w-xxxx.c [SCSI] 3w-xxxx: remove unnecessary local_irq_save/restore for scsi sg copy API 2008-10-23 11:42:17 -05:00
3w-xxxx.h
53c700_d.h_shipped
53c700.c
53c700.h
53c700.scr
a100u2w.c [SCSI] Clean up my email address and use a single standard address for everything 2008-12-29 11:24:12 -06:00
a100u2w.h
a2091.c
a2091.h
a3000.c
a3000.h
a4000t.c
advansys.c [SCSI] advansys, arcmsr, ipr, nsp32, qla1280, stex: use pci_ioremap_bar() 2008-12-29 11:24:11 -06:00
aha152x.c drivers/scsi: use nr_irqs 2008-10-16 16:52:06 +02:00
aha152x.h
aha1542.c
aha1542.h
aha1740.c [SCSI] Clean up my email address and use a single standard address for everything 2008-12-29 11:24:12 -06:00
aha1740.h
aic7xxx_old.c
atari_NCR5380.c
atari_scsi.c m68k: Remove the broken Hades support 2008-10-14 10:23:27 -07:00
atari_scsi.h
atp870u.c [SCSI] Clean up my email address and use a single standard address for everything 2008-12-29 11:24:12 -06:00
atp870u.h
BusLogic.c
BusLogic.h
bvme6000_scsi.c
ch.c [SCSI] add residual argument to scsi_execute and scsi_execute_req 2008-12-29 11:24:24 -06:00
constants.c
dc395x.c
dc395x.h
dmx3191d.c
dpt_i2o.c [SCSI] dpt_i2o: fix transferred data length for scsi_set_resid() 2008-11-15 11:10:14 -06:00
dpti.h
dtc.c
dtc.h
eata_generic.h
eata_pio.c [SCSI] Clean up my email address and use a single standard address for everything 2008-12-29 11:24:12 -06:00
eata_pio.h
eata.c
esp_scsi.c [SCSI] esp_scsi: Use DIV_ROUND_UP 2008-12-29 11:24:14 -06:00
esp_scsi.h
fd_mcs.c
fdomain.c [SCSI] Clean up my email address and use a single standard address for everything 2008-12-29 11:24:12 -06:00
fdomain.h
FlashPoint.c
g_NCR5380_mmio.c
g_NCR5380.c
g_NCR5380.h
gdth_ioctl.h
gdth_proc.c
gdth_proc.h
gdth.c gdth section fixes 2008-11-30 10:03:36 -08:00
gdth.h
gvp11.c
gvp11.h
hosts.c
hptiop.c
hptiop.h
ibmmca.c [SCSI] Clean up my email address and use a single standard address for everything 2008-12-29 11:24:12 -06:00
ide-scsi.c [PATCH] switch ide-scsi 2008-10-21 07:48:46 -04:00
imm.c
imm.h
in2000.c [SCSI] Clean up my email address and use a single standard address for everything 2008-12-29 11:24:12 -06:00
in2000.h
initio.c [SCSI] Clean up my email address and use a single standard address for everything 2008-12-29 11:24:12 -06:00
initio.h [SCSI] Clean up my email address and use a single standard address for everything 2008-12-29 11:24:12 -06:00
ipr.c [SCSI] advansys, arcmsr, ipr, nsp32, qla1280, stex: use pci_ioremap_bar() 2008-12-29 11:24:11 -06:00
ipr.h [SCSI] Clean up my email address and use a single standard address for everything 2008-12-29 11:24:12 -06:00
ips.c
ips.h
iscsi_tcp.c [SCSI] libiscsi_tcp: support padding offload 2008-12-29 11:24:23 -06:00
iscsi_tcp.h [SCSI] iscsi_tcp: hook iscsi_tcp into new libiscsi_tcp module 2008-12-29 11:24:22 -06:00
jazz_esp.c
Kconfig m68k: Atari SCSI needs NVRAM 2008-10-14 10:23:27 -07:00
lasi700.c
libiscsi_tcp.c [SCSI] libiscsi_tcp: support padding offload 2008-12-29 11:24:23 -06:00
libiscsi.c [SCSI] libiscsi: handle init task failures. 2008-12-29 11:24:23 -06:00
libsrp.c
mac53c94.c
mac53c94.h
mac_esp.c [SCSI] mac_esp: fix for quadras with two esp chips 2008-12-29 11:24:19 -06:00
mac_scsi.c m68k: machw.h cleanup 2008-12-28 20:00:03 +01:00
mac_scsi.h
Makefile [SCSI] iscsi_tcp: hook iscsi_tcp into new libiscsi_tcp module 2008-12-29 11:24:22 -06:00
megaraid.c [SCSI] megaraid: fix mega_internal_command oops 2008-11-05 12:40:23 -05:00
megaraid.h [SCSI] megaraid: fix mega_internal_command oops 2008-11-05 12:40:23 -05:00
mesh.c
mesh.h
mvme16x_scsi.c
mvme147.c
mvme147.h
mvsas.c
ncr53c8xx.c
ncr53c8xx.h
NCR53c406a.c
NCR5380.c [SCSI] Clean up my email address and use a single standard address for everything 2008-12-29 11:24:12 -06:00
NCR5380.h
NCR_D700.c
NCR_D700.h
NCR_Q720.c
NCR_Q720.h
nsp32_debug.c
nsp32_io.h
nsp32.c [SCSI] advansys, arcmsr, ipr, nsp32, qla1280, stex: use pci_ioremap_bar() 2008-12-29 11:24:11 -06:00
nsp32.h
osst_detect.h
osst_options.h
osst.c device create: scsi: convert device_create_drvdata to device_create 2008-10-16 09:24:44 -07:00
osst.h
pas16.c
pas16.h
ppa.c
ppa.h
ps3rom.c
ql1040_fw.h
ql1280_fw.h
ql12160_fw.h
qla1280.c [SCSI] advansys, arcmsr, ipr, nsp32, qla1280, stex: use pci_ioremap_bar() 2008-12-29 11:24:11 -06:00
qla1280.h
qlogicfas408.c [SCSI] Clean up my email address and use a single standard address for everything 2008-12-29 11:24:12 -06:00
qlogicfas408.h
qlogicfas.c
qlogicpti_asm.c
qlogicpti.c
qlogicpti.h
raid_class.c
script_asm.pl
scsi_debug.c
scsi_devinfo.c
scsi_error.c [SCSI] scsi_error: TASK ABORTED status handling improvement 2008-12-29 11:24:15 -06:00
scsi_ioctl.c [SCSI] add residual argument to scsi_execute and scsi_execute_req 2008-12-29 11:24:24 -06:00
scsi_lib_dma.c
scsi_lib.c [SCSI] add residual argument to scsi_execute and scsi_execute_req 2008-12-29 11:24:24 -06:00
scsi_logging.h
scsi_module.c
scsi_netlink.c [SCSI] fix netlink kernel-doc 2008-10-23 11:42:17 -05:00
scsi_priv.h [SCSI] modify scsi to handle new fail fast flags. 2008-10-13 09:28:52 -04:00
scsi_proc.c
scsi_sas_internal.h
scsi_scan.c [SCSI] retry with missing data for INQUIRY 2008-12-29 11:24:24 -06:00
scsi_sysctl.c
scsi_sysfs.c
scsi_tgt_if.c
scsi_tgt_lib.c
scsi_tgt_priv.h
scsi_transport_api.h
scsi_transport_fc_internal.h
scsi_transport_fc.c
scsi_transport_iscsi.c [SCSI] iscsi class: fix endpoint id handling 2008-10-13 09:28:59 -04:00
scsi_transport_sas.c
scsi_transport_spi.c [SCSI] add residual argument to scsi_execute and scsi_execute_req 2008-12-29 11:24:24 -06:00
scsi_transport_srp_internal.h
scsi_transport_srp.c
scsi_typedefs.h
scsi_wait_scan.c
scsi.c
scsi.h
scsicam.c
sd_dif.c [SCSI] sd: Switch kernel printing level for DIF messages 2008-10-13 09:28:58 -04:00
sd.c [SCSI] add residual argument to scsi_execute and scsi_execute_req 2008-12-29 11:24:24 -06:00
sd.h [SCSI] sd: fix compile failure with CONFIG_BLK_DEV_INTEGRITY=n 2008-10-15 08:41:28 -04:00
ses.c [SCSI] add residual argument to scsi_execute and scsi_execute_req 2008-12-29 11:24:24 -06:00
sg.c saner FASYNC handling on file close 2008-11-01 09:49:46 -07:00
sgiwd93.c
sim710.c
sni_53c710.c
sr_ioctl.c [SCSI] add residual argument to scsi_execute and scsi_execute_req 2008-12-29 11:24:24 -06:00
sr_vendor.c drivers/scsi/sr_vendor.c: use bcd2bin 2008-10-20 08:52:41 -07:00
sr.c [SCSI] add residual argument to scsi_execute and scsi_execute_req 2008-12-29 11:24:24 -06:00
sr.h
st_options.h
st.c [SCSI] st: update to use block timeout 2008-12-29 11:24:19 -06:00
st.h
stex.c [SCSI] advansys, arcmsr, ipr, nsp32, qla1280, stex: use pci_ioremap_bar() 2008-12-29 11:24:11 -06:00
sun3_NCR5380.c
sun3_scsi_vme.c
sun3_scsi.c
sun3_scsi.h
sun3x_esp.c [SCSI] sun3x_esp: Convert && to || 2008-10-23 11:42:19 -05:00
sun_esp.c
sym53c416.c [SCSI] Clean up my email address and use a single standard address for everything 2008-12-29 11:24:12 -06:00
sym53c416.h
t128.c
t128.h
tmscsim.c [SCSI] tmscsim: fix indentation and braces disagreement - add braces 2008-12-29 11:24:14 -06:00
tmscsim.h
u14-34f.c [SCSI] u14-34f: fix scsi_dma_map failure case 2008-12-29 11:24:14 -06:00
ultrastor.c
ultrastor.h
wd33c93.c
wd33c93.h
wd7000.c [SCSI] Clean up my email address and use a single standard address for everything 2008-12-29 11:24:12 -06:00
zalon.c
zorro7xx.c