kernel_optimize_test/arch/arm/mach-orion5x/addr-map.c
Andrew Lunn d2621b82c2 Orion5x: Fix Section mismatch warnings
Wrongly placed __initdata, and missing __init caused these warnings.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-05-14 18:12:37 +02:00

155 lines
4.3 KiB
C

/*
* arch/arm/mach-orion5x/addr-map.c
*
* Address map functions for Marvell Orion 5x SoCs
*
* Maintainer: Tzachi Perelstein <tzachi@marvell.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mbus.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <plat/addr-map.h>
#include "common.h"
/*
* The Orion has fully programmable address map. There's a separate address
* map for each of the device _master_ interfaces, e.g. CPU, PCI, PCIe, USB,
* Gigabit Ethernet, DMA/XOR engines, etc. Each interface has its own
* address decode windows that allow it to access any of the Orion resources.
*
* CPU address decoding --
* Linux assumes that it is the boot loader that already setup the access to
* DDR and internal registers.
* Setup access to PCI and PCIe IO/MEM space is issued by this file.
* Setup access to various devices located on the device bus interface (e.g.
* flashes, RTC, etc) should be issued by machine-setup.c according to
* specific board population (by using orion5x_setup_*_win()).
*
* Non-CPU Masters address decoding --
* Unlike the CPU, we setup the access from Orion's master interfaces to DDR
* banks only (the typical use case).
* Setup access for each master to DDR is issued by platform device setup.
*/
/*
* Generic Address Decode Windows bit settings
*/
#define TARGET_DEV_BUS 1
#define TARGET_PCI 3
#define TARGET_PCIE 4
#define TARGET_SRAM 9
#define ATTR_PCIE_MEM 0x59
#define ATTR_PCIE_IO 0x51
#define ATTR_PCIE_WA 0x79
#define ATTR_PCI_MEM 0x59
#define ATTR_PCI_IO 0x51
#define ATTR_DEV_CS0 0x1e
#define ATTR_DEV_CS1 0x1d
#define ATTR_DEV_CS2 0x1b
#define ATTR_DEV_BOOT 0xf
#define ATTR_SRAM 0x0
static int __initdata win_alloc_count;
static int __init cpu_win_can_remap(const struct orion_addr_map_cfg *cfg,
const int win)
{
u32 dev, rev;
orion5x_pcie_id(&dev, &rev);
if ((dev == MV88F5281_DEV_ID && win < 4)
|| (dev == MV88F5182_DEV_ID && win < 2)
|| (dev == MV88F5181_DEV_ID && win < 2)
|| (dev == MV88F6183_DEV_ID && win < 4))
return 1;
return 0;
}
/*
* Description of the windows needed by the platform code
*/
static struct orion_addr_map_cfg addr_map_cfg __initdata = {
.num_wins = 8,
.cpu_win_can_remap = cpu_win_can_remap,
.bridge_virt_base = ORION5X_BRIDGE_VIRT_BASE,
};
static const struct __initdata orion_addr_map_info addr_map_info[] = {
/*
* Setup windows for PCI+PCIe IO+MEM space.
*/
{ 0, ORION5X_PCIE_IO_PHYS_BASE, ORION5X_PCIE_IO_SIZE,
TARGET_PCIE, ATTR_PCIE_IO, ORION5X_PCIE_IO_BUS_BASE
},
{ 1, ORION5X_PCI_IO_PHYS_BASE, ORION5X_PCI_IO_SIZE,
TARGET_PCI, ATTR_PCI_IO, ORION5X_PCI_IO_BUS_BASE
},
{ 2, ORION5X_PCIE_MEM_PHYS_BASE, ORION5X_PCIE_MEM_SIZE,
TARGET_PCIE, ATTR_PCIE_MEM, -1
},
{ 3, ORION5X_PCI_MEM_PHYS_BASE, ORION5X_PCI_MEM_SIZE,
TARGET_PCI, ATTR_PCI_MEM, -1
},
/* End marker */
{ -1, 0, 0, 0, 0, 0 }
};
void __init orion5x_setup_cpu_mbus_bridge(void)
{
/*
* Disable, clear and configure windows.
*/
orion_config_wins(&addr_map_cfg, addr_map_info);
win_alloc_count = 4;
/*
* Setup MBUS dram target info.
*/
orion_setup_cpu_mbus_target(&addr_map_cfg, ORION5X_DDR_WINDOW_CPU_BASE);
}
void __init orion5x_setup_dev_boot_win(u32 base, u32 size)
{
orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size,
TARGET_DEV_BUS, ATTR_DEV_BOOT, -1);
}
void __init orion5x_setup_dev0_win(u32 base, u32 size)
{
orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size,
TARGET_DEV_BUS, ATTR_DEV_CS0, -1);
}
void __init orion5x_setup_dev1_win(u32 base, u32 size)
{
orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size,
TARGET_DEV_BUS, ATTR_DEV_CS1, -1);
}
void __init orion5x_setup_dev2_win(u32 base, u32 size)
{
orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size,
TARGET_DEV_BUS, ATTR_DEV_CS2, -1);
}
void __init orion5x_setup_pcie_wa_win(u32 base, u32 size)
{
orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size,
TARGET_PCIE, ATTR_PCIE_WA, -1);
}
void __init orion5x_setup_sram_win(void)
{
orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++,
ORION5X_SRAM_PHYS_BASE, ORION5X_SRAM_SIZE,
TARGET_SRAM, ATTR_SRAM, -1);
}