AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
903e2bbda9
kernel_optimize_test/arch/arm/kernel/entry-common.S
Al Viro fa1b4f91d6 [ARM] safer handling of syscall table padding 
ARM entry-common.S needs to know syscall table size; in itself that would
not be a problem, but there's an additional constraint - some of the
instructions using it want a constant that would be a multiple of 4.
So we have to pad syscall table with sys_ni_syscall and that's where
the trouble begins.  .rept pseudo-op wants a constant expression for
number of repetitions and subtraction of two labels (before and after
syscall table) doesn't always get simplified to constant early enough
for .rept.  If labels end up in different frags, we lose.  And while
the frag size is large enough (slightly below 4Kb), the syscall table
is about 1/3 of that.  We used to get away with that, but the recent
changes had been enough to trigger the breakage.

Proper fix is simple: have a macro (CALL(x)) to populate the table
instead of using explicit .long x and the first time we include calls.S
have it defined to .equ NR_syscalls,NR_syscalls+1.  Then we can find
the proper amount of padding on the first inclusion simply by looking
at NR_syscalls at that time.  And that will be constant, no matter what.

Moreover, the same trick kills the need of having an estimate of padded
NR_syscalls - it will be calculated for free at the same time.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 12:57:01 +00:00

394 lines
8.9 KiB
ArmAsm
Raw Blame History

/*
* linux/arch/arm/kernel/entry-common.S
*
* Copyright (C) 2000 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/config.h>
#include <asm/unistd.h>
#include "entry-header.S"
.align 5
/*
* This is the fast syscall return path. We do as little as
* possible here, and this includes saving r0 back into the SVC
* stack.
*/
ret_fast_syscall:
disable_irq @ disable interrupts
ldr r1, [tsk, #TI_FLAGS]
tst r1, #_TIF_WORK_MASK
bne fast_work_pending
@ fast_restore_user_regs
ldr r1, [sp, #S_OFF + S_PSR] @ get calling cpsr
ldr lr, [sp, #S_OFF + S_PC]! @ get pc
msr spsr_cxsf, r1 @ save in spsr_svc
ldmdb sp, {r1 - lr}^ @ get calling r1 - lr
mov r0, r0
add sp, sp, #S_FRAME_SIZE - S_PC
movs pc, lr @ return & move spsr_svc into cpsr
/*
* Ok, we need to do extra processing, enter the slow path.
*/
fast_work_pending:
str r0, [sp, #S_R0+S_OFF]! @ returned r0
work_pending:
tst r1, #_TIF_NEED_RESCHED
bne work_resched
tst r1, #_TIF_NOTIFY_RESUME | _TIF_SIGPENDING
beq no_work_pending
mov r0, sp @ 'regs'
mov r2, why @ 'syscall'
bl do_notify_resume
b ret_slow_syscall @ Check work again
work_resched:
bl schedule
/*
* "slow" syscall return path. "why" tells us if this was a real syscall.
*/
ENTRY(ret_to_user)
ret_slow_syscall:
disable_irq @ disable interrupts
ldr r1, [tsk, #TI_FLAGS]
tst r1, #_TIF_WORK_MASK
bne work_pending
no_work_pending:
@ slow_restore_user_regs
ldr r1, [sp, #S_PSR] @ get calling cpsr
ldr lr, [sp, #S_PC]! @ get pc
msr spsr_cxsf, r1 @ save in spsr_svc
ldmdb sp, {r0 - lr}^ @ get calling r1 - lr
mov r0, r0
add sp, sp, #S_FRAME_SIZE - S_PC
movs pc, lr @ return & move spsr_svc into cpsr
/*
* This is how we return from a fork.
*/
ENTRY(ret_from_fork)
bl schedule_tail
get_thread_info tsk
ldr r1, [tsk, #TI_FLAGS] @ check for syscall tracing
mov why, #1
tst r1, #_TIF_SYSCALL_TRACE @ are we tracing syscalls?
beq ret_slow_syscall
mov r1, sp
mov r0, #1 @ trace exit [IP = 1]
bl syscall_trace
b ret_slow_syscall
.equ NR_syscalls,0
#define CALL(x) .equ NR_syscalls,NR_syscalls+1
#include "calls.S"
#undef CALL
#define CALL(x) .long x
/*=============================================================================
* SWI handler
*-----------------------------------------------------------------------------
*/
/* If we're optimising for StrongARM the resulting code won't
run on an ARM7 and we can save a couple of instructions.
--pb */
#ifdef CONFIG_CPU_ARM710
#define A710(code...) code
.Larm710bug:
ldmia sp, {r0 - lr}^ @ Get calling r0 - lr
mov r0, r0
add sp, sp, #S_FRAME_SIZE
subs pc, lr, #4
#else
#define A710(code...)
#endif
.align 5
ENTRY(vector_swi)
sub sp, sp, #S_FRAME_SIZE
stmia sp, {r0 - r12} @ Calling r0 - r12
add r8, sp, #S_PC
stmdb r8, {sp, lr}^ @ Calling sp, lr
mrs r8, spsr @ called from non-FIQ mode, so ok.
str lr, [sp, #S_PC] @ Save calling PC
str r8, [sp, #S_PSR] @ Save CPSR
str r0, [sp, #S_OLD_R0] @ Save OLD_R0
zero_fp
/*
* Get the system call number.
*/
#if defined(CONFIG_OABI_COMPAT)
/*
* If we have CONFIG_OABI_COMPAT then we need to look at the swi
* value to determine if it is an EABI or an old ABI call.
*/
#ifdef CONFIG_ARM_THUMB
tst r8, #PSR_T_BIT
movne r10, #0 @ no thumb OABI emulation
ldreq r10, [lr, #-4] @ get SWI instruction
#else
ldr r10, [lr, #-4] @ get SWI instruction
A710( and ip, r10, #0x0f000000 @ check for SWI )
A710( teq ip, #0x0f000000 )
A710( bne .Larm710bug )
#endif
#elif defined(CONFIG_AEABI)
/*
* Pure EABI user space always put syscall number into scno (r7).
*/
A710( ldr ip, [lr, #-4] @ get SWI instruction )
A710( and ip, ip, #0x0f000000 @ check for SWI )
A710( teq ip, #0x0f000000 )
A710( bne .Larm710bug )
#elif defined(CONFIG_ARM_THUMB)
/* Legacy ABI only, possibly thumb mode. */
tst r8, #PSR_T_BIT @ this is SPSR from save_user_regs
addne scno, r7, #__NR_SYSCALL_BASE @ put OS number in
ldreq scno, [lr, #-4]
#else
/* Legacy ABI only. */
ldr scno, [lr, #-4] @ get SWI instruction
A710( and ip, scno, #0x0f000000 @ check for SWI )
A710( teq ip, #0x0f000000 )
A710( bne .Larm710bug )
#endif
#ifdef CONFIG_ALIGNMENT_TRAP
ldr ip, __cr_alignment
ldr ip, [ip]
mcr p15, 0, ip, c1, c0 @ update control register
#endif
enable_irq
get_thread_info tsk
adr tbl, sys_call_table @ load syscall table pointer
ldr ip, [tsk, #TI_FLAGS] @ check for syscall tracing
#if defined(CONFIG_OABI_COMPAT)
/*
* If the swi argument is zero, this is an EABI call and we do nothing.
*
* If this is an old ABI call, get the syscall number into scno and
* get the old ABI syscall table address.
*/
bics r10, r10, #0xff000000
eorne scno, r10, #__NR_OABI_SYSCALL_BASE
ldrne tbl, =sys_oabi_call_table
#elif !defined(CONFIG_AEABI)
bic scno, scno, #0xff000000 @ mask off SWI op-code
eor scno, scno, #__NR_SYSCALL_BASE @ check OS number
#endif
stmdb sp!, {r4, r5} @ push fifth and sixth args
tst ip, #_TIF_SYSCALL_TRACE @ are we tracing syscalls?
bne __sys_trace
cmp scno, #NR_syscalls @ check upper syscall limit
adr lr, ret_fast_syscall @ return address
ldrcc pc, [tbl, scno, lsl #2] @ call sys_* routine
add r1, sp, #S_OFF
2: mov why, #0 @ no longer a real syscall
cmp scno, #(__ARM_NR_BASE - __NR_SYSCALL_BASE)
eor r0, scno, #__NR_SYSCALL_BASE @ put OS number back
bcs arm_syscall
b sys_ni_syscall @ not private func
/*
* This is the really slow path. We're going to be doing
* context switches, and waiting for our parent to respond.
*/
__sys_trace:
mov r2, scno
add r1, sp, #S_OFF
mov r0, #0 @ trace entry [IP = 0]
bl syscall_trace
adr lr, __sys_trace_return @ return address
mov scno, r0 @ syscall number (possibly new)
add r1, sp, #S_R0 + S_OFF @ pointer to regs
cmp scno, #NR_syscalls @ check upper syscall limit
ldmccia r1, {r0 - r3} @ have to reload r0 - r3
ldrcc pc, [tbl, scno, lsl #2] @ call sys_* routine
b 2b
__sys_trace_return:
str r0, [sp, #S_R0 + S_OFF]! @ save returned r0
mov r2, scno
mov r1, sp
mov r0, #1 @ trace exit [IP = 1]
bl syscall_trace
b ret_slow_syscall
.align 5
#ifdef CONFIG_ALIGNMENT_TRAP
.type __cr_alignment, #object
__cr_alignment:
.word cr_alignment
#endif
.ltorg
/*
* This is the syscall table declaration for native ABI syscalls.
* With EABI a couple syscalls are obsolete and defined as sys_ni_syscall.
*/
#define ABI(native, compat) native
#ifdef CONFIG_AEABI
#define OBSOLETE(syscall) sys_ni_syscall
#else
#define OBSOLETE(syscall) syscall
#endif
.type sys_call_table, #object
ENTRY(sys_call_table)
#include "calls.S"
#undef ABI
#undef OBSOLETE
/*============================================================================
* Special system call wrappers
*/
@ r0 = syscall number
@ r8 = syscall table
.type sys_syscall, #function
sys_syscall:
eor scno, r0, #__NR_OABI_SYSCALL_BASE
cmp scno, #__NR_syscall - __NR_SYSCALL_BASE
cmpne scno, #NR_syscalls @ check range
stmloia sp, {r5, r6} @ shuffle args
movlo r0, r1
movlo r1, r2
movlo r2, r3
movlo r3, r4
ldrlo pc, [tbl, scno, lsl #2]
b sys_ni_syscall
sys_fork_wrapper:
add r0, sp, #S_OFF
b sys_fork
sys_vfork_wrapper:
add r0, sp, #S_OFF
b sys_vfork
sys_execve_wrapper:
add r3, sp, #S_OFF
b sys_execve
sys_clone_wrapper:
add ip, sp, #S_OFF
str ip, [sp, #4]
b sys_clone
sys_sigsuspend_wrapper:
add r3, sp, #S_OFF
b sys_sigsuspend
sys_rt_sigsuspend_wrapper:
add r2, sp, #S_OFF
b sys_rt_sigsuspend
sys_sigreturn_wrapper:
add r0, sp, #S_OFF
b sys_sigreturn
sys_rt_sigreturn_wrapper:
add r0, sp, #S_OFF
b sys_rt_sigreturn
sys_sigaltstack_wrapper:
ldr r2, [sp, #S_OFF + S_SP]
b do_sigaltstack
sys_statfs64_wrapper:
teq r1, #88
moveq r1, #84
b sys_statfs64
sys_fstatfs64_wrapper:
teq r1, #88
moveq r1, #84
b sys_fstatfs64
/*
* Note: off_4k (r5) is always units of 4K. If we can't do the requested
* offset, we return EINVAL.
*/
sys_mmap2:
#if PAGE_SHIFT > 12
tst r5, #PGOFF_MASK
moveq r5, r5, lsr #PAGE_SHIFT - 12
streq r5, [sp, #4]
beq do_mmap2
mov r0, #-EINVAL
RETINSTR(mov,pc, lr)
#else
str r5, [sp, #4]
b do_mmap2
#endif
#ifdef CONFIG_OABI_COMPAT
/*
* These are syscalls with argument register differences
*/
sys_oabi_pread64:
stmia sp, {r3, r4}
b sys_pread64
sys_oabi_pwrite64:
stmia sp, {r3, r4}
b sys_pwrite64
sys_oabi_truncate64:
mov r3, r2
mov r2, r1
b sys_truncate64
sys_oabi_ftruncate64:
mov r3, r2
mov r2, r1
b sys_ftruncate64
sys_oabi_readahead:
str r3, [sp]
mov r3, r2
mov r2, r1
b sys_readahead
/*
* Let's declare a second syscall table for old ABI binaries
* using the compatibility syscall entries.
*/
#define ABI(native, compat) compat
#define OBSOLETE(syscall) syscall
.type sys_oabi_call_table, #object
ENTRY(sys_oabi_call_table)
#include "calls.S"
#undef ABI
#undef OBSOLETE
#endif
View Git Blame Copy Permalink