kernel_optimize_test/arch/arm/mach-omap2
Rajendra Nayak 911bd7395c ARM: OMAP4: PM: Add init api for DPLL nodes
An api at init for all dpll nodes seem to be
needed to reparent the dpll clk node to its
bypass clk in case the dpll is in bypass.
If not done this causes sequencing issues at init
during propogate_rate.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoit Cousson <b-cousson@ti.com>
2009-12-11 17:00:47 -07:00
..
include/mach omap3: zoom: rename zoom2 name to generic zoom 2009-11-22 10:24:33 -08:00
board-2430sdp.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
board-3430sdp.c OMAP: SDP: Enable DSS2 for OMAP3 SDP board 2009-12-09 18:29:38 +02:00
board-3630sdp.c omap: 3630sdp: introduce 3630 sdp board support 2009-11-25 14:21:01 -08:00
board-4430sdp.c Merge branch '7xx-iosplit-plat' with omap-fixes 2009-11-10 18:10:34 -08:00
board-am3517evm.c AM35xx: Add support for AM3517 EVM board 2009-11-25 14:21:01 -08:00
board-apollon.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
board-cm-t35.c omap3: Add CompuLab CM-T35 board support 2009-11-25 14:21:00 -08:00
board-generic.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
board-h4.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
board-igep0020.c omap3: Add minimal IGEP v2 support 2009-11-25 14:21:00 -08:00
board-ldp.c Merge branch '7xx-iosplit-plat' with omap-fixes 2009-11-10 18:10:34 -08:00
board-n8x0.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
board-omap3beagle.c Merge branch 'topic/asoc' into for-linus 2009-12-04 16:22:41 +01:00
board-omap3evm.c omap3evm: MIgrate to smsc911x ethernet driver 2009-11-22 10:24:33 -08:00
board-omap3pandora.c Merge branch 'topic/asoc' into for-linus 2009-12-04 16:22:41 +01:00
board-overo.c omap: Add platform init code for EHCI driver 2009-11-22 10:24:32 -08:00
board-rx51-peripherals.c omap3: rx51: Add wl1251 wlan driver support 2009-11-22 10:24:33 -08:00
board-rx51-sdram.c omap3: rx51: Add SDRAM init 2009-11-22 10:24:33 -08:00
board-rx51.c omap3: rx51: Add SDRAM init 2009-11-22 10:24:33 -08:00
board-zoom2.c Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2009-12-08 08:15:29 -08:00
board-zoom3.c omap3: zoom: Introduce zoom3 board support 2009-11-22 10:24:33 -08:00
board-zoom-debugboard.c omap3: zoom: rename zoom2 name to generic zoom 2009-11-22 10:24:33 -08:00
board-zoom-peripherals.c omap3: zoom: Drop i2c-1 speed to 2400 2009-11-22 10:24:33 -08:00
clock2xxx_data.c OMAP2 clock: convert clock24xx.h to clock2xxx_data.c, opp2xxx* 2009-12-11 16:16:00 -07:00
clock2xxx.c OMAP2 clock: convert clock24xx.h to clock2xxx_data.c, opp2xxx* 2009-12-11 16:16:00 -07:00
clock2xxx.h OMAP2 clock: convert clock24xx.h to clock2xxx_data.c, opp2xxx* 2009-12-11 16:16:00 -07:00
clock34xx_data.c OMAP3 clock: convert clock34xx.h to clock34xx_data.c 2009-12-11 16:12:15 -07:00
clock34xx.c ARM: OMAP4: PM: Move DPLL control apis to dpll.c 2009-12-11 17:00:46 -07:00
clock34xx.h ARM: OMAP4: PM: Move DPLL control apis to dpll.c 2009-12-11 17:00:46 -07:00
clock44xx_data.c ARM: OMAP4: PM: Add init api for DPLL nodes 2009-12-11 17:00:47 -07:00
clock44xx.c ARM: OMAP4: PM: Add support for OMAP4 dpll api's 2009-12-11 17:00:46 -07:00
clock44xx.h ARM: OMAP4: PM: Move DPLL control apis to dpll.c 2009-12-11 17:00:46 -07:00
clock_common_data.c OMAP3 clock: convert clock34xx.h to clock34xx_data.c 2009-12-11 16:12:15 -07:00
clock.c ARM: OMAP4: PM: Add init api for DPLL nodes 2009-12-11 17:00:47 -07:00
clock.h ARM: OMAP4: PM: Add init api for DPLL nodes 2009-12-11 17:00:47 -07:00
clockdomain.c OMAP clockdomain/powerdomain: remove CONFIG_OMAP_DEBUG_{CLOCK,POWER}DOMAIN 2009-12-11 17:00:40 -07:00
clockdomains.h omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
cm4xxx.c omap: Fix 44xx compile 2009-09-24 16:23:07 -07:00
cm44xx.h ARM: OMAP4: PM: Adds CM1/2 register defs for OMAP4 2009-12-11 17:00:45 -07:00
cm-regbits-24xx.h [ARM] OMAP2 PRCM: clean up CM_IDLEST bits 2009-02-08 17:50:37 +00:00
cm-regbits-34xx.h OMAP3: PM: Add D2D clocks and auto-idle setup to PRCM init 2009-05-28 10:59:07 -07:00
cm-regbits-44xx.h ARM: OMAP4: PM: Adds CM1/2 register field masks 2009-12-11 17:00:45 -07:00
cm.c OMAP clock/hwmod: fix off-by-one errors 2009-12-11 17:00:43 -07:00
cm.h ARM: OMAP4: PM: Add dummy hooks for OMAP4 dpll api's 2009-12-11 17:00:46 -07:00
control.c OMAP3: PM: Program SDRC to send self refresh on timeout of AUTO_CNT 2009-11-11 14:42:28 -08:00
cpuidle34xx.c OMAP3: PM: Added resched check into idle calls 2009-11-11 14:42:50 -08:00
devices.c omap: mailbox: Add resources and mailbox register base address for OMAP4 mailbox 2009-11-22 10:24:33 -08:00
dpll.c ARM: OMAP4: PM: Add support for OMAP4 dpll api's 2009-12-11 17:00:46 -07:00
emu.c ARM: 5843/1: OMAP3: add AMBA devices for ETM and ETB 2009-12-02 10:25:23 +00:00
gpmc-onenand.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
gpmc-smc91x.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
gpmc.c ARM: OMAP4: PM: Add dummy hooks for OMAP4 dpll api's 2009-12-11 17:00:46 -07:00
id.c omap: Cleanup the coding style in id.c 2009-11-22 10:24:33 -08:00
io.c ARM: OMAP4: PM: Add dummy hooks for OMAP4 dpll api's 2009-12-11 17:00:46 -07:00
iommu2.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
irq.c OMAP3: PM: Fix INTC context save/restore 2009-11-11 14:42:27 -08:00
Kconfig OMAP3: SDRC: Place SDRC AC timing and MR changes in CORE DVFS SRAM code behind Kconfig 2009-12-11 17:00:42 -07:00
mailbox.c omap: mailbox: Adds code changes to support OMAP4 mailbox 2009-11-22 10:24:33 -08:00
Makefile ARM: OMAP4: PM: Add support for OMAP4 dpll api's 2009-12-11 17:00:46 -07:00
Makefile.boot [ARM] 3145/1: OMAP 3a/5: Add support for omap24xx 2005-11-10 14:26:51 +00:00
mcbsp.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
mmc-twl4030.c omap3630: Set omap3630 MMC1 I/O speed to 52Mhz 2009-11-22 10:24:32 -08:00
mmc-twl4030.h omap_hsmmc: support for deeper power saving states 2009-09-23 07:39:35 -07:00
mux.c omap3evm: ehci: Update EHCI support on OMAP3EVM (Rev >= E) 2009-11-22 10:24:33 -08:00
omap3-iommu.c omap: iommu: reorganize 2009-11-22 10:24:32 -08:00
omap_hwmod_34xx.h omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
omap_hwmod_2420.h omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
omap_hwmod_2430.h omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
omap_hwmod.c OMAP: hwmod: warn on missing clockdomain 2009-12-11 17:00:44 -07:00
omap-headsmp.S ARM: OMAP4: SMP: Add OMAP4430 SMP board files 2009-06-09 13:03:50 +05:30
omap-smp.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
opp2xxx.h OMAP2 clock: convert clock24xx.h to clock2xxx_data.c, opp2xxx* 2009-12-11 16:16:00 -07:00
opp2420_data.c OMAP2 clock: convert clock24xx.h to clock2xxx_data.c, opp2xxx* 2009-12-11 16:16:00 -07:00
opp2430_data.c OMAP2 clock: convert clock24xx.h to clock2xxx_data.c, opp2xxx* 2009-12-11 16:16:00 -07:00
pm24xx.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
pm34xx.c OMAP3: PM: Added resched check into idle calls 2009-11-11 14:42:50 -08:00
pm-debug.c OMAP powerdomain/PM: use symbolic constants for the max number of power states 2009-12-11 17:00:41 -07:00
pm.h OMAP3: PM: CPUidle: fix init sequencing 2009-11-11 14:42:49 -08:00
powerdomain.c OMAP3: PM: Fix for MPU power domain MEM BANK position 2009-12-11 17:00:42 -07:00
powerdomains24xx.h omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
powerdomains34xx.h OMAP3: PM: Fix for MPU power domain MEM BANK position 2009-12-11 17:00:42 -07:00
powerdomains.h omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
prcm-common.h ARM: OMAP4: PM: Adds PRM register shift and mask bits 2009-12-11 17:00:45 -07:00
prcm.c ARM: OMAP4: PM: Fix the PRM and CM base addresses 2009-12-11 17:00:44 -07:00
prm44xx.h ARM: OMAP4: PM: Adds PRM register defs for OMAP4 2009-12-11 17:00:45 -07:00
prm-regbits-24xx.h ARM: OMAP2: Powerdomain: Add OMAP2 powerdomains 2008-08-19 11:08:42 +03:00
prm-regbits-34xx.h OMAP3: PM: Enable IO-CHAIN wakeup 2009-11-11 14:42:28 -08:00
prm-regbits-44xx.h ARM: OMAP4: PM: Adds PRM register shift and mask bits 2009-12-11 17:00:45 -07:00
prm.h ARM: OMAP4: PM: Adds PRM register defs for OMAP4 2009-12-11 17:00:45 -07:00
sdram-hynix-h8mbx00u0mer-0em.h omap3: zoom: Introduce zoom3 board support 2009-11-22 10:24:33 -08:00
sdram-micron-mt46h32m32lf-6.h omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sdram-qimonda-hyb18m512160af-6.h omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sdrc2xxx.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sdrc.c OMAP2: Add funcs for writing SMS_ROT_* registers 2009-12-09 11:44:32 +02:00
sdrc.h OMAP2 clock: convert clock24xx.h to clock2xxx_data.c, opp2xxx* 2009-12-11 16:16:00 -07:00
serial.c omap: Eliminate OMAP_MAX_NR_PORTS 2009-11-22 10:24:32 -08:00
sleep24xx.S omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sleep34xx.S OMAP3: PM: Wait for SDRC ready iso a blind delay 2009-11-11 14:42:27 -08:00
sram34xx.S OMAP3: SDRC: Place SDRC AC timing and MR changes in CORE DVFS SRAM code behind Kconfig 2009-12-11 17:00:42 -07:00
sram242x.S omap: Split OMAP2_IO_ADDRESS to L3 and L4 2009-10-19 15:25:31 -07:00
sram243x.S omap: Split OMAP2_IO_ADDRESS to L3 and L4 2009-10-19 15:25:31 -07:00
timer-gp.c PM debug: allow configurable wakeup from suspend on OMAP GPtimer 2009-11-11 14:42:28 -08:00
timer-mpu.c ARM: OMAP4: SMP: Add mpu timer support for OMAP4430 2009-06-09 13:03:59 +05:30
usb-ehci.c omap: Add platform init code for EHCI driver 2009-11-22 10:24:32 -08:00
usb-musb.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
usb-tusb6010.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00