forked from luck/tmp_suning_uos_patched
0902d5011c
Pull x96 apic updates from Thomas Gleixner: "Updates for the x86 APIC interrupt handling and APIC timer: - Fix a long standing issue with spurious interrupts which was caused by the big vector management rework a few years ago. Robert Hodaszi provided finally enough debug data and an excellent initial failure analysis which allowed to understand the underlying issues. This contains a change to the core interrupt management code which is required to handle this correctly for the APIC/IO_APIC. The core changes are NOOPs for most architectures except ARM64. ARM64 is not impacted by the change as confirmed by Marc Zyngier. - Newer systems allow to disable the PIT clock for power saving causing panic in the timer interrupt delivery check of the IO/APIC when the HPET timer is not enabled either. While the clock could be turned on this would cause an endless whack a mole game to chase the proper register in each affected chipset. These systems provide the relevant frequencies for TSC, CPU and the local APIC timer via CPUID and/or MSRs, which allows to avoid the PIT/HPET based calibration. As the calibration code is the only usage of the legacy timers on modern systems and is skipped anyway when the frequencies are known already, there is no point in setting up the PIT and actually checking for the interrupt delivery via IO/APIC. To achieve this on a wide variety of platforms, the CPUID/MSR based frequency readout has been made more robust, which also allowed to remove quite some workarounds which turned out to be not longer required. Thanks to Daniel Drake for analysis, patches and verification" * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/irq: Seperate unused system vectors from spurious entry again x86/irq: Handle spurious interrupt after shutdown gracefully x86/ioapic: Implement irq_get_irqchip_state() callback genirq: Add optional hardware synchronization for shutdown genirq: Fix misleading synchronize_irq() documentation genirq: Delay deactivation in free_irq() x86/timer: Skip PIT initialization on modern chipsets x86/apic: Use non-atomic operations when possible x86/apic: Make apic_bsp_setup() static x86/tsc: Set LAPIC timer period to crystal clock frequency x86/apic: Rename 'lapic_timer_frequency' to 'lapic_timer_period' x86/tsc: Use CPUID.0x16 to calculate missing crystal frequency
368 lines
9.4 KiB
C
368 lines
9.4 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Interrupt descriptor table related code
|
|
*/
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <asm/traps.h>
|
|
#include <asm/proto.h>
|
|
#include <asm/desc.h>
|
|
#include <asm/hw_irq.h>
|
|
|
|
struct idt_data {
|
|
unsigned int vector;
|
|
unsigned int segment;
|
|
struct idt_bits bits;
|
|
const void *addr;
|
|
};
|
|
|
|
#define DPL0 0x0
|
|
#define DPL3 0x3
|
|
|
|
#define DEFAULT_STACK 0
|
|
|
|
#define G(_vector, _addr, _ist, _type, _dpl, _segment) \
|
|
{ \
|
|
.vector = _vector, \
|
|
.bits.ist = _ist, \
|
|
.bits.type = _type, \
|
|
.bits.dpl = _dpl, \
|
|
.bits.p = 1, \
|
|
.addr = _addr, \
|
|
.segment = _segment, \
|
|
}
|
|
|
|
/* Interrupt gate */
|
|
#define INTG(_vector, _addr) \
|
|
G(_vector, _addr, DEFAULT_STACK, GATE_INTERRUPT, DPL0, __KERNEL_CS)
|
|
|
|
/* System interrupt gate */
|
|
#define SYSG(_vector, _addr) \
|
|
G(_vector, _addr, DEFAULT_STACK, GATE_INTERRUPT, DPL3, __KERNEL_CS)
|
|
|
|
/*
|
|
* Interrupt gate with interrupt stack. The _ist index is the index in
|
|
* the tss.ist[] array, but for the descriptor it needs to start at 1.
|
|
*/
|
|
#define ISTG(_vector, _addr, _ist) \
|
|
G(_vector, _addr, _ist + 1, GATE_INTERRUPT, DPL0, __KERNEL_CS)
|
|
|
|
/* Task gate */
|
|
#define TSKG(_vector, _gdt) \
|
|
G(_vector, NULL, DEFAULT_STACK, GATE_TASK, DPL0, _gdt << 3)
|
|
|
|
/*
|
|
* Early traps running on the DEFAULT_STACK because the other interrupt
|
|
* stacks work only after cpu_init().
|
|
*/
|
|
static const __initconst struct idt_data early_idts[] = {
|
|
INTG(X86_TRAP_DB, debug),
|
|
SYSG(X86_TRAP_BP, int3),
|
|
#ifdef CONFIG_X86_32
|
|
INTG(X86_TRAP_PF, page_fault),
|
|
#endif
|
|
};
|
|
|
|
/*
|
|
* The default IDT entries which are set up in trap_init() before
|
|
* cpu_init() is invoked. Interrupt stacks cannot be used at that point and
|
|
* the traps which use them are reinitialized with IST after cpu_init() has
|
|
* set up TSS.
|
|
*/
|
|
static const __initconst struct idt_data def_idts[] = {
|
|
INTG(X86_TRAP_DE, divide_error),
|
|
INTG(X86_TRAP_NMI, nmi),
|
|
INTG(X86_TRAP_BR, bounds),
|
|
INTG(X86_TRAP_UD, invalid_op),
|
|
INTG(X86_TRAP_NM, device_not_available),
|
|
INTG(X86_TRAP_OLD_MF, coprocessor_segment_overrun),
|
|
INTG(X86_TRAP_TS, invalid_TSS),
|
|
INTG(X86_TRAP_NP, segment_not_present),
|
|
INTG(X86_TRAP_SS, stack_segment),
|
|
INTG(X86_TRAP_GP, general_protection),
|
|
INTG(X86_TRAP_SPURIOUS, spurious_interrupt_bug),
|
|
INTG(X86_TRAP_MF, coprocessor_error),
|
|
INTG(X86_TRAP_AC, alignment_check),
|
|
INTG(X86_TRAP_XF, simd_coprocessor_error),
|
|
|
|
#ifdef CONFIG_X86_32
|
|
TSKG(X86_TRAP_DF, GDT_ENTRY_DOUBLEFAULT_TSS),
|
|
#else
|
|
INTG(X86_TRAP_DF, double_fault),
|
|
#endif
|
|
INTG(X86_TRAP_DB, debug),
|
|
|
|
#ifdef CONFIG_X86_MCE
|
|
INTG(X86_TRAP_MC, &machine_check),
|
|
#endif
|
|
|
|
SYSG(X86_TRAP_OF, overflow),
|
|
#if defined(CONFIG_IA32_EMULATION)
|
|
SYSG(IA32_SYSCALL_VECTOR, entry_INT80_compat),
|
|
#elif defined(CONFIG_X86_32)
|
|
SYSG(IA32_SYSCALL_VECTOR, entry_INT80_32),
|
|
#endif
|
|
};
|
|
|
|
/*
|
|
* The APIC and SMP idt entries
|
|
*/
|
|
static const __initconst struct idt_data apic_idts[] = {
|
|
#ifdef CONFIG_SMP
|
|
INTG(RESCHEDULE_VECTOR, reschedule_interrupt),
|
|
INTG(CALL_FUNCTION_VECTOR, call_function_interrupt),
|
|
INTG(CALL_FUNCTION_SINGLE_VECTOR, call_function_single_interrupt),
|
|
INTG(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt),
|
|
INTG(REBOOT_VECTOR, reboot_interrupt),
|
|
#endif
|
|
|
|
#ifdef CONFIG_X86_THERMAL_VECTOR
|
|
INTG(THERMAL_APIC_VECTOR, thermal_interrupt),
|
|
#endif
|
|
|
|
#ifdef CONFIG_X86_MCE_THRESHOLD
|
|
INTG(THRESHOLD_APIC_VECTOR, threshold_interrupt),
|
|
#endif
|
|
|
|
#ifdef CONFIG_X86_MCE_AMD
|
|
INTG(DEFERRED_ERROR_VECTOR, deferred_error_interrupt),
|
|
#endif
|
|
|
|
#ifdef CONFIG_X86_LOCAL_APIC
|
|
INTG(LOCAL_TIMER_VECTOR, apic_timer_interrupt),
|
|
INTG(X86_PLATFORM_IPI_VECTOR, x86_platform_ipi),
|
|
# ifdef CONFIG_HAVE_KVM
|
|
INTG(POSTED_INTR_VECTOR, kvm_posted_intr_ipi),
|
|
INTG(POSTED_INTR_WAKEUP_VECTOR, kvm_posted_intr_wakeup_ipi),
|
|
INTG(POSTED_INTR_NESTED_VECTOR, kvm_posted_intr_nested_ipi),
|
|
# endif
|
|
# ifdef CONFIG_IRQ_WORK
|
|
INTG(IRQ_WORK_VECTOR, irq_work_interrupt),
|
|
# endif
|
|
#ifdef CONFIG_X86_UV
|
|
INTG(UV_BAU_MESSAGE, uv_bau_message_intr1),
|
|
#endif
|
|
INTG(SPURIOUS_APIC_VECTOR, spurious_interrupt),
|
|
INTG(ERROR_APIC_VECTOR, error_interrupt),
|
|
#endif
|
|
};
|
|
|
|
#ifdef CONFIG_X86_64
|
|
/*
|
|
* Early traps running on the DEFAULT_STACK because the other interrupt
|
|
* stacks work only after cpu_init().
|
|
*/
|
|
static const __initconst struct idt_data early_pf_idts[] = {
|
|
INTG(X86_TRAP_PF, page_fault),
|
|
};
|
|
|
|
/*
|
|
* Override for the debug_idt. Same as the default, but with interrupt
|
|
* stack set to DEFAULT_STACK (0). Required for NMI trap handling.
|
|
*/
|
|
static const __initconst struct idt_data dbg_idts[] = {
|
|
INTG(X86_TRAP_DB, debug),
|
|
};
|
|
#endif
|
|
|
|
/* Must be page-aligned because the real IDT is used in a fixmap. */
|
|
gate_desc idt_table[IDT_ENTRIES] __page_aligned_bss;
|
|
|
|
struct desc_ptr idt_descr __ro_after_init = {
|
|
.size = (IDT_ENTRIES * 2 * sizeof(unsigned long)) - 1,
|
|
.address = (unsigned long) idt_table,
|
|
};
|
|
|
|
#ifdef CONFIG_X86_64
|
|
/* No need to be aligned, but done to keep all IDTs defined the same way. */
|
|
gate_desc debug_idt_table[IDT_ENTRIES] __page_aligned_bss;
|
|
|
|
/*
|
|
* The exceptions which use Interrupt stacks. They are setup after
|
|
* cpu_init() when the TSS has been initialized.
|
|
*/
|
|
static const __initconst struct idt_data ist_idts[] = {
|
|
ISTG(X86_TRAP_DB, debug, IST_INDEX_DB),
|
|
ISTG(X86_TRAP_NMI, nmi, IST_INDEX_NMI),
|
|
ISTG(X86_TRAP_DF, double_fault, IST_INDEX_DF),
|
|
#ifdef CONFIG_X86_MCE
|
|
ISTG(X86_TRAP_MC, &machine_check, IST_INDEX_MCE),
|
|
#endif
|
|
};
|
|
|
|
/*
|
|
* Override for the debug_idt. Same as the default, but with interrupt
|
|
* stack set to DEFAULT_STACK (0). Required for NMI trap handling.
|
|
*/
|
|
const struct desc_ptr debug_idt_descr = {
|
|
.size = IDT_ENTRIES * 16 - 1,
|
|
.address = (unsigned long) debug_idt_table,
|
|
};
|
|
#endif
|
|
|
|
static inline void idt_init_desc(gate_desc *gate, const struct idt_data *d)
|
|
{
|
|
unsigned long addr = (unsigned long) d->addr;
|
|
|
|
gate->offset_low = (u16) addr;
|
|
gate->segment = (u16) d->segment;
|
|
gate->bits = d->bits;
|
|
gate->offset_middle = (u16) (addr >> 16);
|
|
#ifdef CONFIG_X86_64
|
|
gate->offset_high = (u32) (addr >> 32);
|
|
gate->reserved = 0;
|
|
#endif
|
|
}
|
|
|
|
static void
|
|
idt_setup_from_table(gate_desc *idt, const struct idt_data *t, int size, bool sys)
|
|
{
|
|
gate_desc desc;
|
|
|
|
for (; size > 0; t++, size--) {
|
|
idt_init_desc(&desc, t);
|
|
write_idt_entry(idt, t->vector, &desc);
|
|
if (sys)
|
|
set_bit(t->vector, system_vectors);
|
|
}
|
|
}
|
|
|
|
static void set_intr_gate(unsigned int n, const void *addr)
|
|
{
|
|
struct idt_data data;
|
|
|
|
BUG_ON(n > 0xFF);
|
|
|
|
memset(&data, 0, sizeof(data));
|
|
data.vector = n;
|
|
data.addr = addr;
|
|
data.segment = __KERNEL_CS;
|
|
data.bits.type = GATE_INTERRUPT;
|
|
data.bits.p = 1;
|
|
|
|
idt_setup_from_table(idt_table, &data, 1, false);
|
|
}
|
|
|
|
/**
|
|
* idt_setup_early_traps - Initialize the idt table with early traps
|
|
*
|
|
* On X8664 these traps do not use interrupt stacks as they can't work
|
|
* before cpu_init() is invoked and sets up TSS. The IST variants are
|
|
* installed after that.
|
|
*/
|
|
void __init idt_setup_early_traps(void)
|
|
{
|
|
idt_setup_from_table(idt_table, early_idts, ARRAY_SIZE(early_idts),
|
|
true);
|
|
load_idt(&idt_descr);
|
|
}
|
|
|
|
/**
|
|
* idt_setup_traps - Initialize the idt table with default traps
|
|
*/
|
|
void __init idt_setup_traps(void)
|
|
{
|
|
idt_setup_from_table(idt_table, def_idts, ARRAY_SIZE(def_idts), true);
|
|
}
|
|
|
|
#ifdef CONFIG_X86_64
|
|
/**
|
|
* idt_setup_early_pf - Initialize the idt table with early pagefault handler
|
|
*
|
|
* On X8664 this does not use interrupt stacks as they can't work before
|
|
* cpu_init() is invoked and sets up TSS. The IST variant is installed
|
|
* after that.
|
|
*
|
|
* FIXME: Why is 32bit and 64bit installing the PF handler at different
|
|
* places in the early setup code?
|
|
*/
|
|
void __init idt_setup_early_pf(void)
|
|
{
|
|
idt_setup_from_table(idt_table, early_pf_idts,
|
|
ARRAY_SIZE(early_pf_idts), true);
|
|
}
|
|
|
|
/**
|
|
* idt_setup_ist_traps - Initialize the idt table with traps using IST
|
|
*/
|
|
void __init idt_setup_ist_traps(void)
|
|
{
|
|
idt_setup_from_table(idt_table, ist_idts, ARRAY_SIZE(ist_idts), true);
|
|
}
|
|
|
|
/**
|
|
* idt_setup_debugidt_traps - Initialize the debug idt table with debug traps
|
|
*/
|
|
void __init idt_setup_debugidt_traps(void)
|
|
{
|
|
memcpy(&debug_idt_table, &idt_table, IDT_ENTRIES * 16);
|
|
|
|
idt_setup_from_table(debug_idt_table, dbg_idts, ARRAY_SIZE(dbg_idts), false);
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* idt_setup_apic_and_irq_gates - Setup APIC/SMP and normal interrupt gates
|
|
*/
|
|
void __init idt_setup_apic_and_irq_gates(void)
|
|
{
|
|
int i = FIRST_EXTERNAL_VECTOR;
|
|
void *entry;
|
|
|
|
idt_setup_from_table(idt_table, apic_idts, ARRAY_SIZE(apic_idts), true);
|
|
|
|
for_each_clear_bit_from(i, system_vectors, FIRST_SYSTEM_VECTOR) {
|
|
entry = irq_entries_start + 8 * (i - FIRST_EXTERNAL_VECTOR);
|
|
set_intr_gate(i, entry);
|
|
}
|
|
|
|
#ifdef CONFIG_X86_LOCAL_APIC
|
|
for_each_clear_bit_from(i, system_vectors, NR_VECTORS) {
|
|
set_bit(i, system_vectors);
|
|
entry = spurious_entries_start + 8 * (i - FIRST_SYSTEM_VECTOR);
|
|
set_intr_gate(i, entry);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/**
|
|
* idt_setup_early_handler - Initializes the idt table with early handlers
|
|
*/
|
|
void __init idt_setup_early_handler(void)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < NUM_EXCEPTION_VECTORS; i++)
|
|
set_intr_gate(i, early_idt_handler_array[i]);
|
|
#ifdef CONFIG_X86_32
|
|
for ( ; i < NR_VECTORS; i++)
|
|
set_intr_gate(i, early_ignore_irq);
|
|
#endif
|
|
load_idt(&idt_descr);
|
|
}
|
|
|
|
/**
|
|
* idt_invalidate - Invalidate interrupt descriptor table
|
|
* @addr: The virtual address of the 'invalid' IDT
|
|
*/
|
|
void idt_invalidate(void *addr)
|
|
{
|
|
struct desc_ptr idt = { .address = (unsigned long) addr, .size = 0 };
|
|
|
|
load_idt(&idt);
|
|
}
|
|
|
|
void __init update_intr_gate(unsigned int n, const void *addr)
|
|
{
|
|
if (WARN_ON_ONCE(!test_bit(n, system_vectors)))
|
|
return;
|
|
set_intr_gate(n, addr);
|
|
}
|
|
|
|
void alloc_intr_gate(unsigned int n, const void *addr)
|
|
{
|
|
BUG_ON(n < FIRST_SYSTEM_VECTOR);
|
|
if (!test_and_set_bit(n, system_vectors))
|
|
set_intr_gate(n, addr);
|
|
}
|