kernel_optimize_test/drivers/acpi/resource.c
Lorenzo Pieralisi c04ac679c6 ACPI: Introduce DMA ranges parsing
Some devices have limited addressing capabilities and cannot
reference the whole memory address space while carrying out DMA
operations (eg some devices with bus address bits range smaller than
system bus - which prevents them from using bus addresses that are
otherwise valid for the system).

The ACPI _DMA object allows bus devices to define the DMA window that is
actually addressable by devices that sit upstream the bus, therefore
providing a means to parse and initialize the devices DMA masks and
addressable DMA range size.

By relying on the generic ACPI kernel layer to retrieve and parse
resources, introduce ACPI core code to parse the _DMA object.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Nate Watterson <nwatters@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-07 14:28:51 +02:00

784 lines
23 KiB
C

/*
* drivers/acpi/resource.c - ACPI device resources interpretation.
*
* Copyright (C) 2012, Intel Corp.
* Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
#include <linux/acpi.h>
#include <linux/device.h>
#include <linux/export.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/irq.h>
#ifdef CONFIG_X86
#define valid_IRQ(i) (((i) != 0) && ((i) != 2))
static inline bool acpi_iospace_resource_valid(struct resource *res)
{
/* On X86 IO space is limited to the [0 - 64K] IO port range */
return res->end < 0x10003;
}
#else
#define valid_IRQ(i) (true)
/*
* ACPI IO descriptors on arches other than X86 contain MMIO CPU physical
* addresses mapping IO space in CPU physical address space, IO space
* resources can be placed anywhere in the 64-bit physical address space.
*/
static inline bool
acpi_iospace_resource_valid(struct resource *res) { return true; }
#endif
#if IS_ENABLED(CONFIG_ACPI_GENERIC_GSI)
static inline bool is_gsi(struct acpi_resource_extended_irq *ext_irq)
{
return ext_irq->resource_source.string_length == 0 &&
ext_irq->producer_consumer == ACPI_CONSUMER;
}
#else
static inline bool is_gsi(struct acpi_resource_extended_irq *ext_irq)
{
return true;
}
#endif
static bool acpi_dev_resource_len_valid(u64 start, u64 end, u64 len, bool io)
{
u64 reslen = end - start + 1;
/*
* CHECKME: len might be required to check versus a minimum
* length as well. 1 for io is fine, but for memory it does
* not make any sense at all.
* Note: some BIOSes report incorrect length for ACPI address space
* descriptor, so remove check of 'reslen == len' to avoid regression.
*/
if (len && reslen && start <= end)
return true;
pr_debug("ACPI: invalid or unassigned resource %s [%016llx - %016llx] length [%016llx]\n",
io ? "io" : "mem", start, end, len);
return false;
}
static void acpi_dev_memresource_flags(struct resource *res, u64 len,
u8 write_protect)
{
res->flags = IORESOURCE_MEM;
if (!acpi_dev_resource_len_valid(res->start, res->end, len, false))
res->flags |= IORESOURCE_DISABLED | IORESOURCE_UNSET;
if (write_protect == ACPI_READ_WRITE_MEMORY)
res->flags |= IORESOURCE_MEM_WRITEABLE;
}
static void acpi_dev_get_memresource(struct resource *res, u64 start, u64 len,
u8 write_protect)
{
res->start = start;
res->end = start + len - 1;
acpi_dev_memresource_flags(res, len, write_protect);
}
/**
* acpi_dev_resource_memory - Extract ACPI memory resource information.
* @ares: Input ACPI resource object.
* @res: Output generic resource object.
*
* Check if the given ACPI resource object represents a memory resource and
* if that's the case, use the information in it to populate the generic
* resource object pointed to by @res.
*
* Return:
* 1) false with res->flags setting to zero: not the expected resource type
* 2) false with IORESOURCE_DISABLED in res->flags: valid unassigned resource
* 3) true: valid assigned resource
*/
bool acpi_dev_resource_memory(struct acpi_resource *ares, struct resource *res)
{
struct acpi_resource_memory24 *memory24;
struct acpi_resource_memory32 *memory32;
struct acpi_resource_fixed_memory32 *fixed_memory32;
switch (ares->type) {
case ACPI_RESOURCE_TYPE_MEMORY24:
memory24 = &ares->data.memory24;
acpi_dev_get_memresource(res, memory24->minimum << 8,
memory24->address_length << 8,
memory24->write_protect);
break;
case ACPI_RESOURCE_TYPE_MEMORY32:
memory32 = &ares->data.memory32;
acpi_dev_get_memresource(res, memory32->minimum,
memory32->address_length,
memory32->write_protect);
break;
case ACPI_RESOURCE_TYPE_FIXED_MEMORY32:
fixed_memory32 = &ares->data.fixed_memory32;
acpi_dev_get_memresource(res, fixed_memory32->address,
fixed_memory32->address_length,
fixed_memory32->write_protect);
break;
default:
res->flags = 0;
return false;
}
return !(res->flags & IORESOURCE_DISABLED);
}
EXPORT_SYMBOL_GPL(acpi_dev_resource_memory);
static void acpi_dev_ioresource_flags(struct resource *res, u64 len,
u8 io_decode, u8 translation_type)
{
res->flags = IORESOURCE_IO;
if (!acpi_dev_resource_len_valid(res->start, res->end, len, true))
res->flags |= IORESOURCE_DISABLED | IORESOURCE_UNSET;
if (!acpi_iospace_resource_valid(res))
res->flags |= IORESOURCE_DISABLED | IORESOURCE_UNSET;
if (io_decode == ACPI_DECODE_16)
res->flags |= IORESOURCE_IO_16BIT_ADDR;
if (translation_type == ACPI_SPARSE_TRANSLATION)
res->flags |= IORESOURCE_IO_SPARSE;
}
static void acpi_dev_get_ioresource(struct resource *res, u64 start, u64 len,
u8 io_decode)
{
res->start = start;
res->end = start + len - 1;
acpi_dev_ioresource_flags(res, len, io_decode, 0);
}
/**
* acpi_dev_resource_io - Extract ACPI I/O resource information.
* @ares: Input ACPI resource object.
* @res: Output generic resource object.
*
* Check if the given ACPI resource object represents an I/O resource and
* if that's the case, use the information in it to populate the generic
* resource object pointed to by @res.
*
* Return:
* 1) false with res->flags setting to zero: not the expected resource type
* 2) false with IORESOURCE_DISABLED in res->flags: valid unassigned resource
* 3) true: valid assigned resource
*/
bool acpi_dev_resource_io(struct acpi_resource *ares, struct resource *res)
{
struct acpi_resource_io *io;
struct acpi_resource_fixed_io *fixed_io;
switch (ares->type) {
case ACPI_RESOURCE_TYPE_IO:
io = &ares->data.io;
acpi_dev_get_ioresource(res, io->minimum,
io->address_length,
io->io_decode);
break;
case ACPI_RESOURCE_TYPE_FIXED_IO:
fixed_io = &ares->data.fixed_io;
acpi_dev_get_ioresource(res, fixed_io->address,
fixed_io->address_length,
ACPI_DECODE_10);
break;
default:
res->flags = 0;
return false;
}
return !(res->flags & IORESOURCE_DISABLED);
}
EXPORT_SYMBOL_GPL(acpi_dev_resource_io);
static bool acpi_decode_space(struct resource_win *win,
struct acpi_resource_address *addr,
struct acpi_address64_attribute *attr)
{
u8 iodec = attr->granularity == 0xfff ? ACPI_DECODE_10 : ACPI_DECODE_16;
bool wp = addr->info.mem.write_protect;
u64 len = attr->address_length;
u64 start, end, offset = 0;
struct resource *res = &win->res;
/*
* Filter out invalid descriptor according to ACPI Spec 5.0, section
* 6.4.3.5 Address Space Resource Descriptors.
*/
if ((addr->min_address_fixed != addr->max_address_fixed && len) ||
(addr->min_address_fixed && addr->max_address_fixed && !len))
pr_debug("ACPI: Invalid address space min_addr_fix %d, max_addr_fix %d, len %llx\n",
addr->min_address_fixed, addr->max_address_fixed, len);
/*
* For bridges that translate addresses across the bridge,
* translation_offset is the offset that must be added to the
* address on the secondary side to obtain the address on the
* primary side. Non-bridge devices must list 0 for all Address
* Translation offset bits.
*/
if (addr->producer_consumer == ACPI_PRODUCER)
offset = attr->translation_offset;
else if (attr->translation_offset)
pr_debug("ACPI: translation_offset(%lld) is invalid for non-bridge device.\n",
attr->translation_offset);
start = attr->minimum + offset;
end = attr->maximum + offset;
win->offset = offset;
res->start = start;
res->end = end;
if (sizeof(resource_size_t) < sizeof(u64) &&
(offset != win->offset || start != res->start || end != res->end)) {
pr_warn("acpi resource window ([%#llx-%#llx] ignored, not CPU addressable)\n",
attr->minimum, attr->maximum);
return false;
}
switch (addr->resource_type) {
case ACPI_MEMORY_RANGE:
acpi_dev_memresource_flags(res, len, wp);
break;
case ACPI_IO_RANGE:
acpi_dev_ioresource_flags(res, len, iodec,
addr->info.io.translation_type);
break;
case ACPI_BUS_NUMBER_RANGE:
res->flags = IORESOURCE_BUS;
break;
default:
return false;
}
if (addr->producer_consumer == ACPI_PRODUCER)
res->flags |= IORESOURCE_WINDOW;
if (addr->info.mem.caching == ACPI_PREFETCHABLE_MEMORY)
res->flags |= IORESOURCE_PREFETCH;
return !(res->flags & IORESOURCE_DISABLED);
}
/**
* acpi_dev_resource_address_space - Extract ACPI address space information.
* @ares: Input ACPI resource object.
* @win: Output generic resource object.
*
* Check if the given ACPI resource object represents an address space resource
* and if that's the case, use the information in it to populate the generic
* resource object pointed to by @win.
*
* Return:
* 1) false with win->res.flags setting to zero: not the expected resource type
* 2) false with IORESOURCE_DISABLED in win->res.flags: valid unassigned
* resource
* 3) true: valid assigned resource
*/
bool acpi_dev_resource_address_space(struct acpi_resource *ares,
struct resource_win *win)
{
struct acpi_resource_address64 addr;
win->res.flags = 0;
if (ACPI_FAILURE(acpi_resource_to_address64(ares, &addr)))
return false;
return acpi_decode_space(win, (struct acpi_resource_address *)&addr,
&addr.address);
}
EXPORT_SYMBOL_GPL(acpi_dev_resource_address_space);
/**
* acpi_dev_resource_ext_address_space - Extract ACPI address space information.
* @ares: Input ACPI resource object.
* @win: Output generic resource object.
*
* Check if the given ACPI resource object represents an extended address space
* resource and if that's the case, use the information in it to populate the
* generic resource object pointed to by @win.
*
* Return:
* 1) false with win->res.flags setting to zero: not the expected resource type
* 2) false with IORESOURCE_DISABLED in win->res.flags: valid unassigned
* resource
* 3) true: valid assigned resource
*/
bool acpi_dev_resource_ext_address_space(struct acpi_resource *ares,
struct resource_win *win)
{
struct acpi_resource_extended_address64 *ext_addr;
win->res.flags = 0;
if (ares->type != ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64)
return false;
ext_addr = &ares->data.ext_address64;
return acpi_decode_space(win, (struct acpi_resource_address *)ext_addr,
&ext_addr->address);
}
EXPORT_SYMBOL_GPL(acpi_dev_resource_ext_address_space);
/**
* acpi_dev_irq_flags - Determine IRQ resource flags.
* @triggering: Triggering type as provided by ACPI.
* @polarity: Interrupt polarity as provided by ACPI.
* @shareable: Whether or not the interrupt is shareable.
*/
unsigned long acpi_dev_irq_flags(u8 triggering, u8 polarity, u8 shareable)
{
unsigned long flags;
if (triggering == ACPI_LEVEL_SENSITIVE)
flags = polarity == ACPI_ACTIVE_LOW ?
IORESOURCE_IRQ_LOWLEVEL : IORESOURCE_IRQ_HIGHLEVEL;
else
flags = polarity == ACPI_ACTIVE_LOW ?
IORESOURCE_IRQ_LOWEDGE : IORESOURCE_IRQ_HIGHEDGE;
if (shareable == ACPI_SHARED)
flags |= IORESOURCE_IRQ_SHAREABLE;
return flags | IORESOURCE_IRQ;
}
EXPORT_SYMBOL_GPL(acpi_dev_irq_flags);
/**
* acpi_dev_get_irq_type - Determine irq type.
* @triggering: Triggering type as provided by ACPI.
* @polarity: Interrupt polarity as provided by ACPI.
*/
unsigned int acpi_dev_get_irq_type(int triggering, int polarity)
{
switch (polarity) {
case ACPI_ACTIVE_LOW:
return triggering == ACPI_EDGE_SENSITIVE ?
IRQ_TYPE_EDGE_FALLING :
IRQ_TYPE_LEVEL_LOW;
case ACPI_ACTIVE_HIGH:
return triggering == ACPI_EDGE_SENSITIVE ?
IRQ_TYPE_EDGE_RISING :
IRQ_TYPE_LEVEL_HIGH;
case ACPI_ACTIVE_BOTH:
if (triggering == ACPI_EDGE_SENSITIVE)
return IRQ_TYPE_EDGE_BOTH;
default:
return IRQ_TYPE_NONE;
}
}
EXPORT_SYMBOL_GPL(acpi_dev_get_irq_type);
static void acpi_dev_irqresource_disabled(struct resource *res, u32 gsi)
{
res->start = gsi;
res->end = gsi;
res->flags = IORESOURCE_IRQ | IORESOURCE_DISABLED | IORESOURCE_UNSET;
}
static void acpi_dev_get_irqresource(struct resource *res, u32 gsi,
u8 triggering, u8 polarity, u8 shareable,
bool legacy)
{
int irq, p, t;
if (!valid_IRQ(gsi)) {
acpi_dev_irqresource_disabled(res, gsi);
return;
}
/*
* In IO-APIC mode, use overridden attribute. Two reasons:
* 1. BIOS bug in DSDT
* 2. BIOS uses IO-APIC mode Interrupt Source Override
*
* We do this only if we are dealing with IRQ() or IRQNoFlags()
* resource (the legacy ISA resources). With modern ACPI 5 devices
* using extended IRQ descriptors we take the IRQ configuration
* from _CRS directly.
*/
if (legacy && !acpi_get_override_irq(gsi, &t, &p)) {
u8 trig = t ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE;
u8 pol = p ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH;
if (triggering != trig || polarity != pol) {
pr_warning("ACPI: IRQ %d override to %s, %s\n", gsi,
t ? "level" : "edge", p ? "low" : "high");
triggering = trig;
polarity = pol;
}
}
res->flags = acpi_dev_irq_flags(triggering, polarity, shareable);
irq = acpi_register_gsi(NULL, gsi, triggering, polarity);
if (irq >= 0) {
res->start = irq;
res->end = irq;
} else {
acpi_dev_irqresource_disabled(res, gsi);
}
}
/**
* acpi_dev_resource_interrupt - Extract ACPI interrupt resource information.
* @ares: Input ACPI resource object.
* @index: Index into the array of GSIs represented by the resource.
* @res: Output generic resource object.
*
* Check if the given ACPI resource object represents an interrupt resource
* and @index does not exceed the resource's interrupt count (true is returned
* in that case regardless of the results of the other checks)). If that's the
* case, register the GSI corresponding to @index from the array of interrupts
* represented by the resource and populate the generic resource object pointed
* to by @res accordingly. If the registration of the GSI is not successful,
* IORESOURCE_DISABLED will be set it that object's flags.
*
* Return:
* 1) false with res->flags setting to zero: not the expected resource type
* 2) false with IORESOURCE_DISABLED in res->flags: valid unassigned resource
* 3) true: valid assigned resource
*/
bool acpi_dev_resource_interrupt(struct acpi_resource *ares, int index,
struct resource *res)
{
struct acpi_resource_irq *irq;
struct acpi_resource_extended_irq *ext_irq;
switch (ares->type) {
case ACPI_RESOURCE_TYPE_IRQ:
/*
* Per spec, only one interrupt per descriptor is allowed in
* _CRS, but some firmware violates this, so parse them all.
*/
irq = &ares->data.irq;
if (index >= irq->interrupt_count) {
acpi_dev_irqresource_disabled(res, 0);
return false;
}
acpi_dev_get_irqresource(res, irq->interrupts[index],
irq->triggering, irq->polarity,
irq->sharable, true);
break;
case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
ext_irq = &ares->data.extended_irq;
if (index >= ext_irq->interrupt_count) {
acpi_dev_irqresource_disabled(res, 0);
return false;
}
if (is_gsi(ext_irq))
acpi_dev_get_irqresource(res, ext_irq->interrupts[index],
ext_irq->triggering, ext_irq->polarity,
ext_irq->sharable, false);
else
acpi_dev_irqresource_disabled(res, 0);
break;
default:
res->flags = 0;
return false;
}
return true;
}
EXPORT_SYMBOL_GPL(acpi_dev_resource_interrupt);
/**
* acpi_dev_free_resource_list - Free resource from %acpi_dev_get_resources().
* @list: The head of the resource list to free.
*/
void acpi_dev_free_resource_list(struct list_head *list)
{
resource_list_free(list);
}
EXPORT_SYMBOL_GPL(acpi_dev_free_resource_list);
struct res_proc_context {
struct list_head *list;
int (*preproc)(struct acpi_resource *, void *);
void *preproc_data;
int count;
int error;
};
static acpi_status acpi_dev_new_resource_entry(struct resource_win *win,
struct res_proc_context *c)
{
struct resource_entry *rentry;
rentry = resource_list_create_entry(NULL, 0);
if (!rentry) {
c->error = -ENOMEM;
return AE_NO_MEMORY;
}
*rentry->res = win->res;
rentry->offset = win->offset;
resource_list_add_tail(rentry, c->list);
c->count++;
return AE_OK;
}
static acpi_status acpi_dev_process_resource(struct acpi_resource *ares,
void *context)
{
struct res_proc_context *c = context;
struct resource_win win;
struct resource *res = &win.res;
int i;
if (c->preproc) {
int ret;
ret = c->preproc(ares, c->preproc_data);
if (ret < 0) {
c->error = ret;
return AE_CTRL_TERMINATE;
} else if (ret > 0) {
return AE_OK;
}
}
memset(&win, 0, sizeof(win));
if (acpi_dev_resource_memory(ares, res)
|| acpi_dev_resource_io(ares, res)
|| acpi_dev_resource_address_space(ares, &win)
|| acpi_dev_resource_ext_address_space(ares, &win))
return acpi_dev_new_resource_entry(&win, c);
for (i = 0; acpi_dev_resource_interrupt(ares, i, res); i++) {
acpi_status status;
status = acpi_dev_new_resource_entry(&win, c);
if (ACPI_FAILURE(status))
return status;
}
return AE_OK;
}
static int __acpi_dev_get_resources(struct acpi_device *adev,
struct list_head *list,
int (*preproc)(struct acpi_resource *, void *),
void *preproc_data, char *method)
{
struct res_proc_context c;
acpi_status status;
if (!adev || !adev->handle || !list_empty(list))
return -EINVAL;
if (!acpi_has_method(adev->handle, method))
return 0;
c.list = list;
c.preproc = preproc;
c.preproc_data = preproc_data;
c.count = 0;
c.error = 0;
status = acpi_walk_resources(adev->handle, method,
acpi_dev_process_resource, &c);
if (ACPI_FAILURE(status)) {
acpi_dev_free_resource_list(list);
return c.error ? c.error : -EIO;
}
return c.count;
}
/**
* acpi_dev_get_resources - Get current resources of a device.
* @adev: ACPI device node to get the resources for.
* @list: Head of the resultant list of resources (must be empty).
* @preproc: The caller's preprocessing routine.
* @preproc_data: Pointer passed to the caller's preprocessing routine.
*
* Evaluate the _CRS method for the given device node and process its output by
* (1) executing the @preproc() rountine provided by the caller, passing the
* resource pointer and @preproc_data to it as arguments, for each ACPI resource
* returned and (2) converting all of the returned ACPI resources into struct
* resource objects if possible. If the return value of @preproc() in step (1)
* is different from 0, step (2) is not applied to the given ACPI resource and
* if that value is negative, the whole processing is aborted and that value is
* returned as the final error code.
*
* The resultant struct resource objects are put on the list pointed to by
* @list, that must be empty initially, as members of struct resource_entry
* objects. Callers of this routine should use %acpi_dev_free_resource_list() to
* free that list.
*
* The number of resources in the output list is returned on success, an error
* code reflecting the error condition is returned otherwise.
*/
int acpi_dev_get_resources(struct acpi_device *adev, struct list_head *list,
int (*preproc)(struct acpi_resource *, void *),
void *preproc_data)
{
return __acpi_dev_get_resources(adev, list, preproc, preproc_data,
METHOD_NAME__CRS);
}
EXPORT_SYMBOL_GPL(acpi_dev_get_resources);
static int is_memory(struct acpi_resource *ares, void *not_used)
{
struct resource_win win;
struct resource *res = &win.res;
memset(&win, 0, sizeof(win));
return !(acpi_dev_resource_memory(ares, res)
|| acpi_dev_resource_address_space(ares, &win)
|| acpi_dev_resource_ext_address_space(ares, &win));
}
/**
* acpi_dev_get_dma_resources - Get current DMA resources of a device.
* @adev: ACPI device node to get the resources for.
* @list: Head of the resultant list of resources (must be empty).
*
* Evaluate the _DMA method for the given device node and process its
* output.
*
* The resultant struct resource objects are put on the list pointed to
* by @list, that must be empty initially, as members of struct
* resource_entry objects. Callers of this routine should use
* %acpi_dev_free_resource_list() to free that list.
*
* The number of resources in the output list is returned on success,
* an error code reflecting the error condition is returned otherwise.
*/
int acpi_dev_get_dma_resources(struct acpi_device *adev, struct list_head *list)
{
return __acpi_dev_get_resources(adev, list, is_memory, NULL,
METHOD_NAME__DMA);
}
EXPORT_SYMBOL_GPL(acpi_dev_get_dma_resources);
/**
* acpi_dev_filter_resource_type - Filter ACPI resource according to resource
* types
* @ares: Input ACPI resource object.
* @types: Valid resource types of IORESOURCE_XXX
*
* This is a helper function to support acpi_dev_get_resources(), which filters
* ACPI resource objects according to resource types.
*/
int acpi_dev_filter_resource_type(struct acpi_resource *ares,
unsigned long types)
{
unsigned long type = 0;
switch (ares->type) {
case ACPI_RESOURCE_TYPE_MEMORY24:
case ACPI_RESOURCE_TYPE_MEMORY32:
case ACPI_RESOURCE_TYPE_FIXED_MEMORY32:
type = IORESOURCE_MEM;
break;
case ACPI_RESOURCE_TYPE_IO:
case ACPI_RESOURCE_TYPE_FIXED_IO:
type = IORESOURCE_IO;
break;
case ACPI_RESOURCE_TYPE_IRQ:
case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
type = IORESOURCE_IRQ;
break;
case ACPI_RESOURCE_TYPE_DMA:
case ACPI_RESOURCE_TYPE_FIXED_DMA:
type = IORESOURCE_DMA;
break;
case ACPI_RESOURCE_TYPE_GENERIC_REGISTER:
type = IORESOURCE_REG;
break;
case ACPI_RESOURCE_TYPE_ADDRESS16:
case ACPI_RESOURCE_TYPE_ADDRESS32:
case ACPI_RESOURCE_TYPE_ADDRESS64:
case ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64:
if (ares->data.address.resource_type == ACPI_MEMORY_RANGE)
type = IORESOURCE_MEM;
else if (ares->data.address.resource_type == ACPI_IO_RANGE)
type = IORESOURCE_IO;
else if (ares->data.address.resource_type ==
ACPI_BUS_NUMBER_RANGE)
type = IORESOURCE_BUS;
break;
default:
break;
}
return (type & types) ? 0 : 1;
}
EXPORT_SYMBOL_GPL(acpi_dev_filter_resource_type);
static int acpi_dev_consumes_res(struct acpi_device *adev, struct resource *res)
{
struct list_head resource_list;
struct resource_entry *rentry;
int ret, found = 0;
INIT_LIST_HEAD(&resource_list);
ret = acpi_dev_get_resources(adev, &resource_list, NULL, NULL);
if (ret < 0)
return 0;
list_for_each_entry(rentry, &resource_list, node) {
if (resource_contains(rentry->res, res)) {
found = 1;
break;
}
}
acpi_dev_free_resource_list(&resource_list);
return found;
}
static acpi_status acpi_res_consumer_cb(acpi_handle handle, u32 depth,
void *context, void **ret)
{
struct resource *res = context;
struct acpi_device **consumer = (struct acpi_device **) ret;
struct acpi_device *adev;
if (acpi_bus_get_device(handle, &adev))
return AE_OK;
if (acpi_dev_consumes_res(adev, res)) {
*consumer = adev;
return AE_CTRL_TERMINATE;
}
return AE_OK;
}
/**
* acpi_resource_consumer - Find the ACPI device that consumes @res.
* @res: Resource to search for.
*
* Search the current resource settings (_CRS) of every ACPI device node
* for @res. If we find an ACPI device whose _CRS includes @res, return
* it. Otherwise, return NULL.
*/
struct acpi_device *acpi_resource_consumer(struct resource *res)
{
struct acpi_device *consumer = NULL;
acpi_get_devices(NULL, acpi_res_consumer_cb, res, (void **) &consumer);
return consumer;
}