forked from luck/tmp_suning_uos_patched
fc04cc67ea
Use 8 columns for each number ouput. We don't fit into 80 columns on most machines, so keep the format simple. Print frequency in MHz instead of GHz. We've got 8 columns now, so use them to show low frequency in a more natural unit. Many users didn't understand what %c0 meant, so re-name it to be %Busy. Add Avg_MHz column, which is the frequency that many users expect to see -- the total number of cycles executed over the measurement interval. People found the previous GHz to be confusing, since it was the speed only over the non-idle interval. That measurement has been re-named Bzy_MHz. Suggested-by: Dirk J. Brandewie Signed-off-by: Len Brown <len.brown@intel.com>
222 lines
9.9 KiB
Groff
222 lines
9.9 KiB
Groff
.TH TURBOSTAT 8
|
|
.SH NAME
|
|
turbostat \- Report processor frequency and idle statistics
|
|
.SH SYNOPSIS
|
|
.ft B
|
|
.B turbostat
|
|
.RB [ Options ]
|
|
.RB command
|
|
.br
|
|
.B turbostat
|
|
.RB [ Options ]
|
|
.RB [ "\-i interval_sec" ]
|
|
.SH DESCRIPTION
|
|
\fBturbostat \fP reports processor topology, frequency,
|
|
idle power-state statistics, temperature and power on modern X86 processors.
|
|
Either \fBcommand\fP is forked and statistics are printed
|
|
upon its completion, or statistics are printed periodically.
|
|
|
|
\fBturbostat \fP
|
|
must be run on root, and
|
|
minimally requires that the processor
|
|
supports an "invariant" TSC, plus the APERF and MPERF MSRs.
|
|
Additional information is reported depending on hardware counter support.
|
|
|
|
.SS Options
|
|
The \fB-p\fP option limits output to the 1st thread in 1st core of each package.
|
|
.PP
|
|
The \fB-P\fP option limits output to the 1st thread in each Package.
|
|
.PP
|
|
The \fB-S\fP option limits output to a 1-line System Summary for each interval.
|
|
.PP
|
|
The \fB-v\fP option increases verbosity.
|
|
.PP
|
|
The \fB-c MSR#\fP option includes the delta of the specified 32-bit MSR counter.
|
|
.PP
|
|
The \fB-C MSR#\fP option includes the delta of the specified 64-bit MSR counter.
|
|
.PP
|
|
The \fB-m MSR#\fP option includes the the specified 32-bit MSR value.
|
|
.PP
|
|
The \fB-M MSR#\fP option includes the the specified 64-bit MSR value.
|
|
.PP
|
|
The \fB-i interval_sec\fP option prints statistics every \fiinterval_sec\fP seconds.
|
|
The default is 5 seconds.
|
|
.PP
|
|
The \fBcommand\fP parameter forks \fBcommand\fP and upon its exit,
|
|
displays the statistics gathered since it was forked.
|
|
.PP
|
|
.SH FIELD DESCRIPTIONS
|
|
.nf
|
|
\fBPackage\fP processor package number.
|
|
\fBCore\fP processor core number.
|
|
\fBCPU\fP Linux CPU (logical processor) number.
|
|
Note that multiple CPUs per core indicate support for Intel(R) Hyper-Threading Technology.
|
|
\fBAVG_MHz\fP number of cycles executed divided by time elapsed.
|
|
\fB%Buzy\fP percent of the interval that the CPU retired instructions, aka. % of time in "C0" state.
|
|
\fBBzy_MHz\fP average clock rate while the CPU was busy (in "c0" state).
|
|
\fBTSC_MHz\fP average MHz that the TSC ran during the entire interval.
|
|
\fBCPU%c1, CPU%c3, CPU%c6, CPU%c7\fP show the percentage residency in hardware core idle states.
|
|
\fBCoreTmp\fP Degrees Celsius reported by the per-core Digital Thermal Sensor.
|
|
\fBPkgTtmp\fP Degrees Celsius reported by the per-package Package Thermal Monitor.
|
|
\fBPkg%pc2, Pkg%pc3, Pkg%pc6, Pkg%pc7\fP percentage residency in hardware package idle states.
|
|
\fBPkgWatt\fP Watts consumed by the whole package.
|
|
\fBCorWatt\fP Watts consumed by the core part of the package.
|
|
\fBGFXWatt\fP Watts consumed by the Graphics part of the package -- available only on client processors.
|
|
\fBRAMWatt\fP Watts consumed by the DRAM DIMMS -- available only on server processors.
|
|
\fBPKG_%\fP percent of the interval that RAPL throttling was active on the Package.
|
|
\fBRAM_%\fP percent of the interval that RAPL throttling was active on DRAM.
|
|
.fi
|
|
.PP
|
|
.SH EXAMPLE
|
|
Without any parameters, turbostat prints out counters ever 5 seconds.
|
|
(override interval with "-i sec" option, or specify a command
|
|
for turbostat to fork).
|
|
|
|
The first row of statistics is a summary for the entire system.
|
|
For residency % columns, the summary is a weighted average.
|
|
For Temperature columns, the summary is the column maximum.
|
|
For Watts columns, the summary is a system total.
|
|
Subsequent rows show per-CPU statistics.
|
|
|
|
.nf
|
|
[root@ivy]# ./turbostat
|
|
Core CPU Avg_MHz %Busy Bzy_MHz TSC_MHz SMI CPU%c1 CPU%c3 CPU%c6 CPU%c7 CoreTmp PkgTmp Pkg%pc2 Pkg%pc3 Pkg%pc6 Pkg%pc7 PkgWatt CorWatt GFXWatt
|
|
- - 6 0.36 1596 3492 0 0.59 0.01 99.04 0.00 23 24 23.82 0.01 72.47 0.00 6.40 1.01 0.00
|
|
0 0 9 0.58 1596 3492 0 0.28 0.01 99.13 0.00 23 24 23.82 0.01 72.47 0.00 6.40 1.01 0.00
|
|
0 4 1 0.07 1596 3492 0 0.79
|
|
1 1 10 0.65 1596 3492 0 0.59 0.00 98.76 0.00 23
|
|
1 5 5 0.28 1596 3492 0 0.95
|
|
2 2 10 0.66 1596 3492 0 0.41 0.01 98.92 0.00 23
|
|
2 6 2 0.10 1597 3492 0 0.97
|
|
3 3 3 0.20 1596 3492 0 0.44 0.00 99.37 0.00 23
|
|
3 7 5 0.31 1596 3492 0 0.33
|
|
.fi
|
|
.SH VERBOSE EXAMPLE
|
|
The "-v" option adds verbosity to the output:
|
|
|
|
.nf
|
|
[root@ivy]# turbostat -v
|
|
turbostat v3.0 November 23, 2012 - Len Brown <lenb@kernel.org>
|
|
CPUID(0): GenuineIntel 13 CPUID levels; family:model:stepping 0x6:3a:9 (6:58:9)
|
|
CPUID(6): APERF, DTS, PTM, EPB
|
|
RAPL: 851 sec. Joule Counter Range
|
|
cpu0: MSR_NHM_PLATFORM_INFO: 0x81010f0012300
|
|
16 * 100 = 1600 MHz max efficiency
|
|
35 * 100 = 3500 MHz TSC frequency
|
|
cpu0: MSR_NHM_SNB_PKG_CST_CFG_CTL: 0x1e008402 (UNdemote-C3, UNdemote-C1, demote-C3, demote-C1, locked: pkg-cstate-limit=2: pc6-noret)
|
|
cpu0: MSR_NHM_TURBO_RATIO_LIMIT: 0x25262727
|
|
37 * 100 = 3700 MHz max turbo 4 active cores
|
|
38 * 100 = 3800 MHz max turbo 3 active cores
|
|
39 * 100 = 3900 MHz max turbo 2 active cores
|
|
39 * 100 = 3900 MHz max turbo 1 active cores
|
|
cpu0: MSR_IA32_ENERGY_PERF_BIAS: 0x00000006 (balanced)
|
|
cpu0: MSR_RAPL_POWER_UNIT: 0x000a1003 (0.125000 Watts, 0.000015 Joules, 0.000977 sec.)
|
|
cpu0: MSR_PKG_POWER_INFO: 0x01e00268 (77 W TDP, RAPL 60 - 0 W, 0.000000 sec.)
|
|
cpu0: MSR_PKG_POWER_LIMIT: 0x830000148268 (UNlocked)
|
|
cpu0: PKG Limit #1: ENabled (77.000000 Watts, 1.000000 sec, clamp DISabled)
|
|
cpu0: PKG Limit #2: ENabled (96.000000 Watts, 0.000977* sec, clamp DISabled)
|
|
cpu0: MSR_PP0_POLICY: 0
|
|
cpu0: MSR_PP0_POWER_LIMIT: 0x00000000 (UNlocked)
|
|
cpu0: Cores Limit: DISabled (0.000000 Watts, 0.000977 sec, clamp DISabled)
|
|
cpu0: MSR_PP1_POLICY: 0
|
|
cpu0: MSR_PP1_POWER_LIMIT: 0x00000000 (UNlocked)
|
|
cpu0: GFX Limit: DISabled (0.000000 Watts, 0.000977 sec, clamp DISabled)
|
|
cpu0: MSR_IA32_TEMPERATURE_TARGET: 0x00691400 (105 C)
|
|
cpu0: MSR_IA32_PACKAGE_THERM_STATUS: 0x884e0000 (27 C)
|
|
cpu0: MSR_IA32_THERM_STATUS: 0x88560000 (19 C +/- 1)
|
|
cpu1: MSR_IA32_THERM_STATUS: 0x88560000 (19 C +/- 1)
|
|
cpu2: MSR_IA32_THERM_STATUS: 0x88540000 (21 C +/- 1)
|
|
cpu3: MSR_IA32_THERM_STATUS: 0x884e0000 (27 C +/- 1)
|
|
...
|
|
.fi
|
|
The \fBmax efficiency\fP frequency, a.k.a. Low Frequency Mode, is the frequency
|
|
available at the minimum package voltage. The \fBTSC frequency\fP is the nominal
|
|
maximum frequency of the processor if turbo-mode were not available. This frequency
|
|
should be sustainable on all CPUs indefinitely, given nominal power and cooling.
|
|
The remaining rows show what maximum turbo frequency is possible
|
|
depending on the number of idle cores. Note that this information is
|
|
not available on all processors.
|
|
.SH FORK EXAMPLE
|
|
If turbostat is invoked with a command, it will fork that command
|
|
and output the statistics gathered when the command exits.
|
|
eg. Here a cycle soaker is run on 1 CPU (see %c0) for a few seconds
|
|
until ^C while the other CPUs are mostly idle:
|
|
|
|
.nf
|
|
root@ivy: turbostat cat /dev/zero > /dev/null
|
|
^C
|
|
Core CPU Avg_MHz %Busy Bzy_MHz TSC_MHz SMI CPU%c1 CPU%c3 CPU%c6 CPU%c7 CoreTmp PkgTmp Pkg%pc2 Pkg%pc3 Pkg%pc6 Pkg%pc7 PkgWatt CorWatt GFXWatt
|
|
- - 496 12.75 3886 3492 0 13.16 0.04 74.04 0.00 36 36 0.00 0.00 0.00 0.00 23.15 17.65 0.00
|
|
0 0 22 0.57 3830 3492 0 0.83 0.02 98.59 0.00 27 36 0.00 0.00 0.00 0.00 23.15 17.65 0.00
|
|
0 4 9 0.24 3829 3492 0 1.15
|
|
1 1 4 0.09 3783 3492 0 99.91 0.00 0.00 0.00 36
|
|
1 5 3880 99.82 3888 3492 0 0.18
|
|
2 2 17 0.44 3813 3492 0 0.77 0.04 98.75 0.00 28
|
|
2 6 12 0.32 3823 3492 0 0.89
|
|
3 3 16 0.43 3844 3492 0 0.63 0.11 98.84 0.00 30
|
|
3 7 4 0.11 3827 3492 0 0.94
|
|
30.372243 sec
|
|
|
|
.fi
|
|
Above the cycle soaker drives cpu5 up its 3.8 GHz turbo limit
|
|
while the other processors are generally in various states of idle.
|
|
|
|
Note that cpu1 and cpu5 are HT siblings within core1.
|
|
As cpu5 is very busy, it prevents its sibling, cpu1,
|
|
from entering a c-state deeper than c1.
|
|
|
|
Note that the Avg_MHz column reflects the total number of cycles executed
|
|
divided by the measurement interval. If the %Busy column is 100%,
|
|
then the processor was running at that speed the entire interval.
|
|
The Avg_MHz multiplied by the %Busy results in the Bzy_MHz --
|
|
which is the average frequency while the processor was executing --
|
|
not including any non-busy idle time.
|
|
|
|
.SH NOTES
|
|
|
|
.B "turbostat "
|
|
must be run as root.
|
|
|
|
.B "turbostat "
|
|
reads hardware counters, but doesn't write them.
|
|
So it will not interfere with the OS or other programs, including
|
|
multiple invocations of itself.
|
|
|
|
\fBturbostat \fP
|
|
may work poorly on Linux-2.6.20 through 2.6.29,
|
|
as \fBacpi-cpufreq \fPperiodically cleared the APERF and MPERF
|
|
in those kernels.
|
|
|
|
If the TSC column does not make sense, then
|
|
the other numbers will also make no sense.
|
|
Turbostat is lightweight, and its data collection is not atomic.
|
|
These issues are usually caused by an extremely short measurement
|
|
interval (much less than 1 second), or system activity that prevents
|
|
turbostat from being able to run on all CPUS to quickly collect data.
|
|
|
|
The APERF, MPERF MSRs are defined to count non-halted cycles.
|
|
Although it is not guaranteed by the architecture, turbostat assumes
|
|
that they count at TSC rate, which is true on all processors tested to date.
|
|
|
|
.SH REFERENCES
|
|
"Intel® Turbo Boost Technology
|
|
in Intel® Core™ Microarchitecture (Nehalem) Based Processors"
|
|
http://download.intel.com/design/processor/applnots/320354.pdf
|
|
|
|
"Intel® 64 and IA-32 Architectures Software Developer's Manual
|
|
Volume 3B: System Programming Guide"
|
|
http://www.intel.com/products/processor/manuals/
|
|
|
|
.SH FILES
|
|
.ta
|
|
.nf
|
|
/dev/cpu/*/msr
|
|
.fi
|
|
|
|
.SH "SEE ALSO"
|
|
msr(4), vmstat(8)
|
|
.PP
|
|
.SH AUTHOR
|
|
.nf
|
|
Written by Len Brown <len.brown@intel.com>
|