kernel_optimize_test/arch/ppc/platforms/lwmon.h
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

61 lines
1.9 KiB
C

/*
* Liebherr LWMON board specific definitions
*
* Copyright (c) 2001 Wolfgang Denk (wd@denx.de)
*/
#ifndef __MACH_LWMON_H
#define __MACH_LWMON_H
#include <linux/config.h>
#include <asm/ppcboot.h>
#define IMAP_ADDR 0xFFF00000 /* physical base address of IMMR area */
#define IMAP_SIZE (64 * 1024) /* mapped size of IMMR area */
/*-----------------------------------------------------------------------
* PCMCIA stuff
*-----------------------------------------------------------------------
*
*/
#define PCMCIA_MEM_SIZE ( 64 << 20 )
#define MAX_HWIFS 1 /* overwrite default in include/asm-ppc/ide.h */
/*
* Definitions for IDE0 Interface
*/
#define IDE0_BASE_OFFSET 0
#define IDE0_DATA_REG_OFFSET (PCMCIA_MEM_SIZE + 0x320)
#define IDE0_ERROR_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 1)
#define IDE0_NSECTOR_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 2)
#define IDE0_SECTOR_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 3)
#define IDE0_LCYL_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 4)
#define IDE0_HCYL_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 5)
#define IDE0_SELECT_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 6)
#define IDE0_STATUS_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 7)
#define IDE0_CONTROL_REG_OFFSET 0x0106
#define IDE0_IRQ_REG_OFFSET 0x000A /* not used */
#define IDE0_INTERRUPT 13
/*
* Definitions for I2C devices
*/
#define I2C_ADDR_AUDIO 0x28 /* Audio volume control */
#define I2C_ADDR_SYSMON 0x2E /* LM87 System Monitor */
#define I2C_ADDR_RTC 0x51 /* PCF8563 RTC */
#define I2C_ADDR_POWER_A 0x52 /* PCMCIA/USB power switch, channel A */
#define I2C_ADDR_POWER_B 0x53 /* PCMCIA/USB power switch, channel B */
#define I2C_ADDR_KEYBD 0x56 /* PIC LWE keyboard */
#define I2C_ADDR_PICIO 0x57 /* PIC IO Expander */
#define I2C_ADDR_EEPROM 0x58 /* EEPROM AT24C164 */
/* We don't use the 8259.
*/
#define NR_8259_INTS 0
#endif /* __MACH_LWMON_H */