forked from luck/tmp_suning_uos_patched
9c6a3af003
Falcon spi accesses some ebu functions which are not exported and can not be accessed when build as module. Make this module bool instead. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Thomas Langer <thomas.langer@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
780 lines
23 KiB
Plaintext
780 lines
23 KiB
Plaintext
#
|
|
# SPI driver configuration
|
|
#
|
|
# NOTE: the reason this doesn't show SPI slave support is mostly that
|
|
# nobody's needed a slave side API yet. The master-role API is not
|
|
# fully appropriate there, so it'd need some thought to do well.
|
|
#
|
|
menuconfig SPI
|
|
bool "SPI support"
|
|
depends on HAS_IOMEM
|
|
help
|
|
The "Serial Peripheral Interface" is a low level synchronous
|
|
protocol. Chips that support SPI can have data transfer rates
|
|
up to several tens of Mbit/sec. Chips are addressed with a
|
|
controller and a chipselect. Most SPI slaves don't support
|
|
dynamic device discovery; some are even write-only or read-only.
|
|
|
|
SPI is widely used by microcontrollers to talk with sensors,
|
|
eeprom and flash memory, codecs and various other controller
|
|
chips, analog to digital (and d-to-a) converters, and more.
|
|
MMC and SD cards can be accessed using SPI protocol; and for
|
|
DataFlash cards used in MMC sockets, SPI must always be used.
|
|
|
|
SPI is one of a family of similar protocols using a four wire
|
|
interface (select, clock, data in, data out) including Microwire
|
|
(half duplex), SSP, SSI, and PSP. This driver framework should
|
|
work with most such devices and controllers.
|
|
|
|
if SPI
|
|
|
|
config SPI_DEBUG
|
|
bool "Debug support for SPI drivers"
|
|
depends on DEBUG_KERNEL
|
|
help
|
|
Say "yes" to enable debug messaging (like dev_dbg and pr_debug),
|
|
sysfs, and debugfs support in SPI controller and protocol drivers.
|
|
|
|
#
|
|
# MASTER side ... talking to discrete SPI slave chips including microcontrollers
|
|
#
|
|
|
|
config SPI_MASTER
|
|
# bool "SPI Master Support"
|
|
bool
|
|
default SPI
|
|
help
|
|
If your system has an master-capable SPI controller (which
|
|
provides the clock and chipselect), you can enable that
|
|
controller and the protocol drivers for the SPI slave chips
|
|
that are connected.
|
|
|
|
if SPI_MASTER
|
|
|
|
comment "SPI Master Controller Drivers"
|
|
|
|
config SPI_ALTERA
|
|
tristate "Altera SPI Controller"
|
|
select SPI_BITBANG
|
|
help
|
|
This is the driver for the Altera SPI Controller.
|
|
|
|
config SPI_ATH79
|
|
tristate "Atheros AR71XX/AR724X/AR913X SPI controller driver"
|
|
depends on ATH79 && GPIOLIB
|
|
select SPI_BITBANG
|
|
help
|
|
This enables support for the SPI controller present on the
|
|
Atheros AR71XX/AR724X/AR913X SoCs.
|
|
|
|
config SPI_ARMADA_3700
|
|
tristate "Marvell Armada 3700 SPI Controller"
|
|
depends on (ARCH_MVEBU && OF) || COMPILE_TEST
|
|
help
|
|
This enables support for the SPI controller present on the
|
|
Marvell Armada 3700 SoCs.
|
|
|
|
config SPI_ATMEL
|
|
tristate "Atmel SPI Controller"
|
|
depends on HAS_DMA
|
|
depends on (ARCH_AT91 || AVR32 || COMPILE_TEST)
|
|
help
|
|
This selects a driver for the Atmel SPI Controller, present on
|
|
many AT32 (AVR32) and AT91 (ARM) chips.
|
|
|
|
config SPI_AU1550
|
|
tristate "Au1550/Au1200/Au1300 SPI Controller"
|
|
depends on MIPS_ALCHEMY
|
|
select SPI_BITBANG
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
PSC SPI controller found on Au1550, Au1200 and Au1300 series.
|
|
|
|
config SPI_AXI_SPI_ENGINE
|
|
tristate "Analog Devices AXI SPI Engine controller"
|
|
depends on HAS_IOMEM
|
|
help
|
|
This enables support for the Analog Devices AXI SPI Engine SPI controller.
|
|
It is part of the SPI Engine framework that is used in some Analog Devices
|
|
reference designs for FPGAs.
|
|
|
|
config SPI_BCM2835
|
|
tristate "BCM2835 SPI controller"
|
|
depends on GPIOLIB
|
|
depends on ARCH_BCM2835 || COMPILE_TEST
|
|
help
|
|
This selects a driver for the Broadcom BCM2835 SPI master.
|
|
|
|
The BCM2835 contains two types of SPI master controller; the
|
|
"universal SPI master", and the regular SPI controller. This driver
|
|
is for the regular SPI controller. Slave mode operation is not also
|
|
not supported.
|
|
|
|
config SPI_BCM2835AUX
|
|
tristate "BCM2835 SPI auxiliary controller"
|
|
depends on (ARCH_BCM2835 && GPIOLIB) || COMPILE_TEST
|
|
help
|
|
This selects a driver for the Broadcom BCM2835 SPI aux master.
|
|
|
|
The BCM2835 contains two types of SPI master controller; the
|
|
"universal SPI master", and the regular SPI controller.
|
|
This driver is for the universal/auxiliary SPI controller.
|
|
|
|
config SPI_BFIN5XX
|
|
tristate "SPI controller driver for ADI Blackfin5xx"
|
|
depends on BLACKFIN && !BF60x
|
|
help
|
|
This is the SPI controller master driver for Blackfin 5xx processor.
|
|
|
|
config SPI_ADI_V3
|
|
tristate "SPI controller v3 for ADI"
|
|
depends on BF60x
|
|
help
|
|
This is the SPI controller v3 master driver
|
|
found on Blackfin 60x processor.
|
|
|
|
config SPI_BFIN_SPORT
|
|
tristate "SPI bus via Blackfin SPORT"
|
|
depends on BLACKFIN
|
|
help
|
|
Enable support for a SPI bus via the Blackfin SPORT peripheral.
|
|
|
|
config SPI_BCM53XX
|
|
tristate "Broadcom BCM53xx SPI controller"
|
|
depends on ARCH_BCM_5301X
|
|
depends on BCMA_POSSIBLE
|
|
select BCMA
|
|
help
|
|
Enable support for the SPI controller on Broadcom BCM53xx ARM SoCs.
|
|
|
|
config SPI_BCM63XX
|
|
tristate "Broadcom BCM63xx SPI controller"
|
|
depends on BCM63XX || COMPILE_TEST
|
|
help
|
|
Enable support for the SPI controller on the Broadcom BCM63xx SoCs.
|
|
|
|
config SPI_BCM63XX_HSSPI
|
|
tristate "Broadcom BCM63XX HS SPI controller driver"
|
|
depends on BCM63XX || COMPILE_TEST
|
|
help
|
|
This enables support for the High Speed SPI controller present on
|
|
newer Broadcom BCM63XX SoCs.
|
|
|
|
config SPI_BCM_QSPI
|
|
tristate "Broadcom BSPI and MSPI controller support"
|
|
depends on ARCH_BRCMSTB || ARCH_BCM || ARCH_BCM_IPROC || COMPILE_TEST
|
|
default ARCH_BCM_IPROC
|
|
help
|
|
Enables support for the Broadcom SPI flash and MSPI controller.
|
|
Select this option for any one of BRCMSTB, iProc NSP and NS2 SoCs
|
|
based platforms. This driver works for both SPI master for spi-nor
|
|
flash device as well as MSPI device.
|
|
|
|
config SPI_BITBANG
|
|
tristate "Utilities for Bitbanging SPI masters"
|
|
help
|
|
With a few GPIO pins, your system can bitbang the SPI protocol.
|
|
Select this to get SPI support through I/O pins (GPIO, parallel
|
|
port, etc). Or, some systems' SPI master controller drivers use
|
|
this code to manage the per-word or per-transfer accesses to the
|
|
hardware shift registers.
|
|
|
|
This is library code, and is automatically selected by drivers that
|
|
need it. You only need to select this explicitly to support driver
|
|
modules that aren't part of this kernel tree.
|
|
|
|
config SPI_BUTTERFLY
|
|
tristate "Parallel port adapter for AVR Butterfly (DEVELOPMENT)"
|
|
depends on PARPORT
|
|
select SPI_BITBANG
|
|
help
|
|
This uses a custom parallel port cable to connect to an AVR
|
|
Butterfly <http://www.atmel.com/products/avr/butterfly>, an
|
|
inexpensive battery powered microcontroller evaluation board.
|
|
This same cable can be used to flash new firmware.
|
|
|
|
config SPI_CADENCE
|
|
tristate "Cadence SPI controller"
|
|
help
|
|
This selects the Cadence SPI controller master driver
|
|
used by Xilinx Zynq and ZynqMP.
|
|
|
|
config SPI_CLPS711X
|
|
tristate "CLPS711X host SPI controller"
|
|
depends on ARCH_CLPS711X || COMPILE_TEST
|
|
help
|
|
This enables dedicated general purpose SPI/Microwire1-compatible
|
|
master mode interface (SSI1) for CLPS711X-based CPUs.
|
|
|
|
config SPI_COLDFIRE_QSPI
|
|
tristate "Freescale Coldfire QSPI controller"
|
|
depends on (M520x || M523x || M5249 || M525x || M527x || M528x || M532x)
|
|
help
|
|
This enables support for the Coldfire QSPI controller in master
|
|
mode.
|
|
|
|
config SPI_DAVINCI
|
|
tristate "Texas Instruments DaVinci/DA8x/OMAP-L/AM1x SoC SPI controller"
|
|
depends on ARCH_DAVINCI || ARCH_KEYSTONE
|
|
select SPI_BITBANG
|
|
help
|
|
SPI master controller for DaVinci/DA8x/OMAP-L/AM1x SPI modules.
|
|
|
|
config SPI_DESIGNWARE
|
|
tristate "DesignWare SPI controller core support"
|
|
help
|
|
general driver for SPI controller core from DesignWare
|
|
|
|
config SPI_DW_PCI
|
|
tristate "PCI interface driver for DW SPI core"
|
|
depends on SPI_DESIGNWARE && PCI
|
|
|
|
config SPI_DW_MID_DMA
|
|
bool "DMA support for DW SPI controller on Intel MID platform"
|
|
depends on SPI_DW_PCI && DW_DMAC_PCI
|
|
|
|
config SPI_DW_MMIO
|
|
tristate "Memory-mapped io interface driver for DW SPI core"
|
|
depends on SPI_DESIGNWARE
|
|
|
|
config SPI_DLN2
|
|
tristate "Diolan DLN-2 USB SPI adapter"
|
|
depends on MFD_DLN2
|
|
help
|
|
If you say yes to this option, support will be included for Diolan
|
|
DLN2, a USB to SPI interface.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called spi-dln2.
|
|
|
|
config SPI_EFM32
|
|
tristate "EFM32 SPI controller"
|
|
depends on OF && ARM && (ARCH_EFM32 || COMPILE_TEST)
|
|
select SPI_BITBANG
|
|
help
|
|
Driver for the spi controller found on Energy Micro's EFM32 SoCs.
|
|
|
|
config SPI_EP93XX
|
|
tristate "Cirrus Logic EP93xx SPI controller"
|
|
depends on HAS_DMA
|
|
depends on ARCH_EP93XX || COMPILE_TEST
|
|
help
|
|
This enables using the Cirrus EP93xx SPI controller in master
|
|
mode.
|
|
|
|
config SPI_FALCON
|
|
bool "Falcon SPI controller support"
|
|
depends on SOC_FALCON
|
|
help
|
|
The external bus unit (EBU) found on the FALC-ON SoC has SPI
|
|
emulation that is designed for serial flash access. This driver
|
|
has only been tested with m25p80 type chips. The hardware has no
|
|
support for other types of SPI peripherals.
|
|
|
|
config SPI_FSL_LPSPI
|
|
tristate "Freescale i.MX LPSPI controller"
|
|
depends on ARCH_MXC || COMPILE_TEST
|
|
help
|
|
This enables Freescale i.MX LPSPI controllers in master mode.
|
|
|
|
config SPI_GPIO
|
|
tristate "GPIO-based bitbanging SPI Master"
|
|
depends on GPIOLIB || COMPILE_TEST
|
|
select SPI_BITBANG
|
|
help
|
|
This simple GPIO bitbanging SPI master uses the arch-neutral GPIO
|
|
interface to manage MOSI, MISO, SCK, and chipselect signals. SPI
|
|
slaves connected to a bus using this driver are configured as usual,
|
|
except that the spi_board_info.controller_data holds the GPIO number
|
|
for the chipselect used by this controller driver.
|
|
|
|
Note that this driver often won't achieve even 1 Mbit/sec speeds,
|
|
making it unusually slow for SPI. If your platform can inline
|
|
GPIO operations, you should be able to leverage that for better
|
|
speed with a custom version of this driver; see the source code.
|
|
|
|
config SPI_IMG_SPFI
|
|
tristate "IMG SPFI controller"
|
|
depends on MIPS || COMPILE_TEST
|
|
help
|
|
This enables support for the SPFI master controller found on
|
|
IMG SoCs.
|
|
|
|
config SPI_IMX
|
|
tristate "Freescale i.MX SPI controllers"
|
|
depends on ARCH_MXC || COMPILE_TEST
|
|
select SPI_BITBANG
|
|
help
|
|
This enables using the Freescale i.MX SPI controllers in master
|
|
mode.
|
|
|
|
config SPI_JCORE
|
|
tristate "J-Core SPI Master"
|
|
depends on OF && (SUPERH || COMPILE_TEST)
|
|
help
|
|
This enables support for the SPI master controller in the J-Core
|
|
synthesizable, open source SoC.
|
|
|
|
config SPI_LM70_LLP
|
|
tristate "Parallel port adapter for LM70 eval board (DEVELOPMENT)"
|
|
depends on PARPORT
|
|
select SPI_BITBANG
|
|
help
|
|
This driver supports the NS LM70 LLP Evaluation Board,
|
|
which interfaces to an LM70 temperature sensor using
|
|
a parallel port.
|
|
|
|
config SPI_LP8841_RTC
|
|
tristate "ICP DAS LP-8841 SPI Controller for RTC"
|
|
depends on MACH_PXA27X_DT || COMPILE_TEST
|
|
help
|
|
This driver provides an SPI master device to drive Maxim
|
|
DS-1302 real time clock.
|
|
|
|
Say N here unless you plan to run the kernel on an ICP DAS
|
|
LP-8x4x industrial computer.
|
|
|
|
config SPI_MPC52xx
|
|
tristate "Freescale MPC52xx SPI (non-PSC) controller support"
|
|
depends on PPC_MPC52xx
|
|
help
|
|
This drivers supports the MPC52xx SPI controller in master SPI
|
|
mode.
|
|
|
|
config SPI_MPC52xx_PSC
|
|
tristate "Freescale MPC52xx PSC SPI controller"
|
|
depends on PPC_MPC52xx
|
|
help
|
|
This enables using the Freescale MPC52xx Programmable Serial
|
|
Controller in master SPI mode.
|
|
|
|
config SPI_MPC512x_PSC
|
|
tristate "Freescale MPC512x PSC SPI controller"
|
|
depends on PPC_MPC512x
|
|
help
|
|
This enables using the Freescale MPC5121 Programmable Serial
|
|
Controller in SPI master mode.
|
|
|
|
config SPI_FSL_LIB
|
|
tristate
|
|
depends on OF
|
|
|
|
config SPI_FSL_CPM
|
|
tristate
|
|
depends on FSL_SOC
|
|
|
|
config SPI_FSL_SPI
|
|
tristate "Freescale SPI controller and Aeroflex Gaisler GRLIB SPI controller"
|
|
depends on OF
|
|
select SPI_FSL_LIB
|
|
select SPI_FSL_CPM if FSL_SOC
|
|
help
|
|
This enables using the Freescale SPI controllers in master mode.
|
|
MPC83xx platform uses the controller in cpu mode or CPM/QE mode.
|
|
MPC8569 uses the controller in QE mode, MPC8610 in cpu mode.
|
|
This also enables using the Aeroflex Gaisler GRLIB SPI controller in
|
|
master mode.
|
|
|
|
config SPI_FSL_DSPI
|
|
tristate "Freescale DSPI controller"
|
|
select REGMAP_MMIO
|
|
depends on SOC_VF610 || SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST
|
|
help
|
|
This enables support for the Freescale DSPI controller in master
|
|
mode. VF610 platform uses the controller.
|
|
|
|
config SPI_FSL_ESPI
|
|
tristate "Freescale eSPI controller"
|
|
depends on FSL_SOC
|
|
help
|
|
This enables using the Freescale eSPI controllers in master mode.
|
|
From MPC8536, 85xx platform uses the controller, and all P10xx,
|
|
P20xx, P30xx,P40xx, P50xx uses this controller.
|
|
|
|
config SPI_MESON_SPIFC
|
|
tristate "Amlogic Meson SPIFC controller"
|
|
depends on ARCH_MESON || COMPILE_TEST
|
|
select REGMAP_MMIO
|
|
help
|
|
This enables master mode support for the SPIFC (SPI flash
|
|
controller) available in Amlogic Meson SoCs.
|
|
|
|
config SPI_MT65XX
|
|
tristate "MediaTek SPI controller"
|
|
depends on ARCH_MEDIATEK || COMPILE_TEST
|
|
help
|
|
This selects the MediaTek(R) SPI bus driver.
|
|
If you want to use MediaTek(R) SPI interface,
|
|
say Y or M here.If you are not sure, say N.
|
|
SPI drivers for Mediatek MT65XX and MT81XX series ARM SoCs.
|
|
|
|
config SPI_NUC900
|
|
tristate "Nuvoton NUC900 series SPI"
|
|
depends on ARCH_W90X900
|
|
select SPI_BITBANG
|
|
help
|
|
SPI driver for Nuvoton NUC900 series ARM SoCs
|
|
|
|
config SPI_OC_TINY
|
|
tristate "OpenCores tiny SPI"
|
|
depends on GPIOLIB || COMPILE_TEST
|
|
select SPI_BITBANG
|
|
help
|
|
This is the driver for OpenCores tiny SPI master controller.
|
|
|
|
config SPI_OCTEON
|
|
tristate "Cavium OCTEON SPI controller"
|
|
depends on CAVIUM_OCTEON_SOC
|
|
help
|
|
SPI host driver for the hardware found on some Cavium OCTEON
|
|
SOCs.
|
|
|
|
config SPI_OMAP_UWIRE
|
|
tristate "OMAP1 MicroWire"
|
|
depends on ARCH_OMAP1
|
|
select SPI_BITBANG
|
|
help
|
|
This hooks up to the MicroWire controller on OMAP1 chips.
|
|
|
|
config SPI_OMAP24XX
|
|
tristate "McSPI driver for OMAP"
|
|
depends on HAS_DMA
|
|
depends on ARCH_OMAP2PLUS || COMPILE_TEST
|
|
select SG_SPLIT
|
|
help
|
|
SPI master controller for OMAP24XX and later Multichannel SPI
|
|
(McSPI) modules.
|
|
|
|
config SPI_TI_QSPI
|
|
tristate "DRA7xxx QSPI controller support"
|
|
depends on ARCH_OMAP2PLUS || COMPILE_TEST
|
|
help
|
|
QSPI master controller for DRA7xxx used for flash devices.
|
|
This device supports single, dual and quad read support, while
|
|
it only supports single write mode.
|
|
|
|
config SPI_OMAP_100K
|
|
tristate "OMAP SPI 100K"
|
|
depends on ARCH_OMAP850 || ARCH_OMAP730 || COMPILE_TEST
|
|
help
|
|
OMAP SPI 100K master controller for omap7xx boards.
|
|
|
|
config SPI_ORION
|
|
tristate "Orion SPI master"
|
|
depends on PLAT_ORION || ARCH_MVEBU || COMPILE_TEST
|
|
help
|
|
This enables using the SPI master controller on the Orion
|
|
and MVEBU chips.
|
|
|
|
config SPI_PIC32
|
|
tristate "Microchip PIC32 series SPI"
|
|
depends on MACH_PIC32 || COMPILE_TEST
|
|
help
|
|
SPI driver for Microchip PIC32 SPI master controller.
|
|
|
|
config SPI_PIC32_SQI
|
|
tristate "Microchip PIC32 Quad SPI driver"
|
|
depends on MACH_PIC32 || COMPILE_TEST
|
|
depends on HAS_DMA
|
|
help
|
|
SPI driver for PIC32 Quad SPI controller.
|
|
|
|
config SPI_PL022
|
|
tristate "ARM AMBA PL022 SSP controller"
|
|
depends on ARM_AMBA
|
|
default y if MACH_U300
|
|
default y if ARCH_REALVIEW
|
|
default y if INTEGRATOR_IMPD1
|
|
default y if ARCH_VERSATILE
|
|
help
|
|
This selects the ARM(R) AMBA(R) PrimeCell PL022 SSP
|
|
controller. If you have an embedded system with an AMBA(R)
|
|
bus and a PL022 controller, say Y or M here.
|
|
|
|
config SPI_PPC4xx
|
|
tristate "PPC4xx SPI Controller"
|
|
depends on PPC32 && 4xx
|
|
select SPI_BITBANG
|
|
help
|
|
This selects a driver for the PPC4xx SPI Controller.
|
|
|
|
config SPI_PXA2XX
|
|
tristate "PXA2xx SSP SPI master"
|
|
depends on (ARCH_PXA || PCI || ACPI)
|
|
select PXA_SSP if ARCH_PXA
|
|
help
|
|
This enables using a PXA2xx or Sodaville SSP port as a SPI master
|
|
controller. The driver can be configured to use any SSP port and
|
|
additional documentation can be found a Documentation/spi/pxa2xx.
|
|
|
|
config SPI_PXA2XX_PCI
|
|
def_tristate SPI_PXA2XX && PCI && COMMON_CLK
|
|
|
|
config SPI_ROCKCHIP
|
|
tristate "Rockchip SPI controller driver"
|
|
help
|
|
This selects a driver for Rockchip SPI controller.
|
|
|
|
If you say yes to this option, support will be included for
|
|
RK3066, RK3188 and RK3288 families of SPI controller.
|
|
Rockchip SPI controller support DMA transport and PIO mode.
|
|
The main usecase of this controller is to use spi flash as boot
|
|
device.
|
|
|
|
config SPI_RB4XX
|
|
tristate "Mikrotik RB4XX SPI master"
|
|
depends on SPI_MASTER && ATH79
|
|
help
|
|
SPI controller driver for the Mikrotik RB4xx series boards.
|
|
|
|
config SPI_RSPI
|
|
tristate "Renesas RSPI/QSPI controller"
|
|
depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
|
|
help
|
|
SPI driver for Renesas RSPI and QSPI blocks.
|
|
|
|
config SPI_QUP
|
|
tristate "Qualcomm SPI controller with QUP interface"
|
|
depends on ARCH_QCOM || (ARM && COMPILE_TEST)
|
|
help
|
|
Qualcomm Universal Peripheral (QUP) core is an AHB slave that
|
|
provides a common data path (an output FIFO and an input FIFO)
|
|
for serial peripheral interface (SPI) mini-core. SPI in master
|
|
mode supports up to 50MHz, up to four chip selects, programmable
|
|
data path from 4 bits to 32 bits and numerous protocol variants.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called spi_qup.
|
|
|
|
config SPI_S3C24XX
|
|
tristate "Samsung S3C24XX series SPI"
|
|
depends on ARCH_S3C24XX
|
|
select SPI_BITBANG
|
|
help
|
|
SPI driver for Samsung S3C24XX series ARM SoCs
|
|
|
|
config SPI_S3C24XX_FIQ
|
|
bool "S3C24XX driver with FIQ pseudo-DMA"
|
|
depends on SPI_S3C24XX
|
|
select FIQ
|
|
help
|
|
Enable FIQ support for the S3C24XX SPI driver to provide pseudo
|
|
DMA by using the fast-interrupt request framework, This allows
|
|
the driver to get DMA-like performance when there are either
|
|
no free DMA channels, or when doing transfers that required both
|
|
TX and RX data paths.
|
|
|
|
config SPI_S3C64XX
|
|
tristate "Samsung S3C64XX series type SPI"
|
|
depends on (PLAT_SAMSUNG || ARCH_EXYNOS || COMPILE_TEST)
|
|
help
|
|
SPI driver for Samsung S3C64XX and newer SoCs.
|
|
|
|
config SPI_SC18IS602
|
|
tristate "NXP SC18IS602/602B/603 I2C to SPI bridge"
|
|
depends on I2C
|
|
help
|
|
SPI driver for NXP SC18IS602/602B/603 I2C to SPI bridge.
|
|
|
|
config SPI_SH_MSIOF
|
|
tristate "SuperH MSIOF SPI controller"
|
|
depends on HAVE_CLK && HAS_DMA
|
|
depends on ARCH_SHMOBILE || ARCH_RENESAS || COMPILE_TEST
|
|
help
|
|
SPI driver for SuperH and SH Mobile MSIOF blocks.
|
|
|
|
config SPI_SH
|
|
tristate "SuperH SPI controller"
|
|
depends on SUPERH || COMPILE_TEST
|
|
help
|
|
SPI driver for SuperH SPI blocks.
|
|
|
|
config SPI_SH_SCI
|
|
tristate "SuperH SCI SPI controller"
|
|
depends on SUPERH
|
|
select SPI_BITBANG
|
|
help
|
|
SPI driver for SuperH SCI blocks.
|
|
|
|
config SPI_SH_HSPI
|
|
tristate "SuperH HSPI controller"
|
|
depends on ARCH_RENESAS || COMPILE_TEST
|
|
help
|
|
SPI driver for SuperH HSPI blocks.
|
|
|
|
config SPI_SIRF
|
|
tristate "CSR SiRFprimaII SPI controller"
|
|
depends on SIRF_DMA
|
|
select SPI_BITBANG
|
|
help
|
|
SPI driver for CSR SiRFprimaII SoCs
|
|
|
|
config SPI_ST_SSC4
|
|
tristate "STMicroelectronics SPI SSC-based driver"
|
|
depends on ARCH_STI || COMPILE_TEST
|
|
help
|
|
STMicroelectronics SoCs support for SPI. If you say yes to
|
|
this option, support will be included for the SSC driven SPI.
|
|
|
|
config SPI_SUN4I
|
|
tristate "Allwinner A10 SoCs SPI controller"
|
|
depends on ARCH_SUNXI || COMPILE_TEST
|
|
help
|
|
SPI driver for Allwinner sun4i, sun5i and sun7i SoCs
|
|
|
|
config SPI_SUN6I
|
|
tristate "Allwinner A31 SPI controller"
|
|
depends on ARCH_SUNXI || COMPILE_TEST
|
|
depends on RESET_CONTROLLER
|
|
help
|
|
This enables using the SPI controller on the Allwinner A31 SoCs.
|
|
|
|
config SPI_MXS
|
|
tristate "Freescale MXS SPI controller"
|
|
depends on ARCH_MXS
|
|
select STMP_DEVICE
|
|
help
|
|
SPI driver for Freescale MXS devices.
|
|
|
|
config SPI_TEGRA114
|
|
tristate "NVIDIA Tegra114 SPI Controller"
|
|
depends on (ARCH_TEGRA && TEGRA20_APB_DMA) || COMPILE_TEST
|
|
depends on RESET_CONTROLLER && HAS_DMA
|
|
help
|
|
SPI driver for NVIDIA Tegra114 SPI Controller interface. This controller
|
|
is different than the older SoCs SPI controller and also register interface
|
|
get changed with this controller.
|
|
|
|
config SPI_TEGRA20_SFLASH
|
|
tristate "Nvidia Tegra20 Serial flash Controller"
|
|
depends on ARCH_TEGRA || COMPILE_TEST
|
|
depends on RESET_CONTROLLER
|
|
help
|
|
SPI driver for Nvidia Tegra20 Serial flash Controller interface.
|
|
The main usecase of this controller is to use spi flash as boot
|
|
device.
|
|
|
|
config SPI_TEGRA20_SLINK
|
|
tristate "Nvidia Tegra20/Tegra30 SLINK Controller"
|
|
depends on (ARCH_TEGRA && TEGRA20_APB_DMA) || COMPILE_TEST
|
|
depends on RESET_CONTROLLER && HAS_DMA
|
|
help
|
|
SPI driver for Nvidia Tegra20/Tegra30 SLINK Controller interface.
|
|
|
|
config SPI_THUNDERX
|
|
tristate "Cavium ThunderX SPI controller"
|
|
depends on PCI && 64BIT && (ARM64 || COMPILE_TEST)
|
|
help
|
|
SPI host driver for the hardware found on Cavium ThunderX
|
|
SOCs.
|
|
|
|
config SPI_TOPCLIFF_PCH
|
|
tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) SPI"
|
|
depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
|
|
help
|
|
SPI driver for the Topcliff PCH (Platform Controller Hub) SPI bus
|
|
used in some x86 embedded processors.
|
|
|
|
This driver also supports the ML7213/ML7223/ML7831, a companion chip
|
|
for the Atom E6xx series and compatible with the Intel EG20T PCH.
|
|
|
|
config SPI_TXX9
|
|
tristate "Toshiba TXx9 SPI controller"
|
|
depends on GPIOLIB && (CPU_TX49XX || COMPILE_TEST)
|
|
help
|
|
SPI driver for Toshiba TXx9 MIPS SoCs
|
|
|
|
config SPI_XCOMM
|
|
tristate "Analog Devices AD-FMCOMMS1-EBZ SPI-I2C-bridge driver"
|
|
depends on I2C
|
|
help
|
|
Support for the SPI-I2C bridge found on the Analog Devices
|
|
AD-FMCOMMS1-EBZ board.
|
|
|
|
config SPI_XILINX
|
|
tristate "Xilinx SPI controller common module"
|
|
depends on HAS_IOMEM
|
|
select SPI_BITBANG
|
|
help
|
|
This exposes the SPI controller IP from the Xilinx EDK.
|
|
|
|
See the "OPB Serial Peripheral Interface (SPI) (v1.00e)"
|
|
Product Specification document (DS464) for hardware details.
|
|
|
|
Or for the DS570, see "XPS Serial Peripheral Interface (SPI) (v2.00b)"
|
|
|
|
config SPI_XLP
|
|
tristate "Netlogic XLP SPI controller driver"
|
|
depends on CPU_XLP || ARCH_VULCAN || COMPILE_TEST
|
|
help
|
|
Enable support for the SPI controller on the Netlogic XLP SoCs.
|
|
Currently supported XLP variants are XLP8XX, XLP3XX, XLP2XX, XLP9XX
|
|
and XLP5XX.
|
|
|
|
If you have a Netlogic XLP platform say Y here.
|
|
If unsure, say N.
|
|
|
|
config SPI_XTENSA_XTFPGA
|
|
tristate "Xtensa SPI controller for xtfpga"
|
|
depends on (XTENSA && XTENSA_PLATFORM_XTFPGA) || COMPILE_TEST
|
|
select SPI_BITBANG
|
|
help
|
|
SPI driver for xtfpga SPI master controller.
|
|
|
|
This simple SPI master controller is built into xtfpga bitstreams
|
|
and is used to control daughterboard audio codec. It always transfers
|
|
16 bit words in SPI mode 0, automatically asserting CS on transfer
|
|
start and deasserting on end.
|
|
|
|
config SPI_ZYNQMP_GQSPI
|
|
tristate "Xilinx ZynqMP GQSPI controller"
|
|
depends on SPI_MASTER && HAS_DMA
|
|
help
|
|
Enables Xilinx GQSPI controller driver for Zynq UltraScale+ MPSoC.
|
|
|
|
#
|
|
# Add new SPI master controllers in alphabetical order above this line
|
|
#
|
|
|
|
#
|
|
# There are lots of SPI device types, with sensors and memory
|
|
# being probably the most widely used ones.
|
|
#
|
|
comment "SPI Protocol Masters"
|
|
|
|
config SPI_SPIDEV
|
|
tristate "User mode SPI device driver support"
|
|
help
|
|
This supports user mode SPI protocol drivers.
|
|
|
|
Note that this application programming interface is EXPERIMENTAL
|
|
and hence SUBJECT TO CHANGE WITHOUT NOTICE while it stabilizes.
|
|
|
|
config SPI_LOOPBACK_TEST
|
|
tristate "spi loopback test framework support"
|
|
depends on m
|
|
help
|
|
This enables the SPI loopback testing framework driver
|
|
|
|
primarily used for development of spi_master drivers
|
|
and to detect regressions
|
|
|
|
config SPI_TLE62X0
|
|
tristate "Infineon TLE62X0 (for power switching)"
|
|
depends on SYSFS
|
|
help
|
|
SPI driver for Infineon TLE62X0 series line driver chips,
|
|
such as the TLE6220, TLE6230 and TLE6240. This provides a
|
|
sysfs interface, with each line presented as a kind of GPIO
|
|
exposing both switch control and diagnostic feedback.
|
|
|
|
#
|
|
# Add new SPI protocol masters in alphabetical order above this line
|
|
#
|
|
|
|
endif # SPI_MASTER
|
|
|
|
# (slave support would go here)
|
|
|
|
endif # SPI
|