AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
9ee332d99e
kernel_optimize_test/arch/x86/kernel/signal.c
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

889 lines
23 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 1991, 1992 Linus Torvalds
* Copyright (C) 2000, 2001, 2002 Andi Kleen SuSE Labs
*
* 1997-11-28 Modified for POSIX.1b signals by Richard Henderson
* 2000-06-20 Pentium III FXSR, SSE support by Gareth Hughes
* 2000-2002 x86-64 support by Andi Kleen
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/sched.h>
#include <linux/sched/task_stack.h>
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/wait.h>
#include <linux/tracehook.h>
#include <linux/unistd.h>
#include <linux/stddef.h>
#include <linux/personality.h>
#include <linux/uaccess.h>
#include <linux/user-return-notifier.h>
#include <linux/uprobes.h>
#include <linux/context_tracking.h>
#include <asm/processor.h>
#include <asm/ucontext.h>
#include <asm/fpu/internal.h>
#include <asm/fpu/signal.h>
#include <asm/vdso.h>
#include <asm/mce.h>
#include <asm/sighandling.h>
#include <asm/vm86.h>
#ifdef CONFIG_X86_64
#include <asm/proto.h>
#include <asm/ia32_unistd.h>
#endif /* CONFIG_X86_64 */
#include <asm/syscall.h>
#include <asm/syscalls.h>
#include <asm/sigframe.h>
#include <asm/signal.h>
#define COPY(x) do { \
get_user_ex(regs->x, &sc->x); \
} while (0)
#define GET_SEG(seg) ({ \
unsigned short tmp; \
get_user_ex(tmp, &sc->seg); \
tmp; \
})
#define COPY_SEG(seg) do { \
regs->seg = GET_SEG(seg); \
} while (0)
#define COPY_SEG_CPL3(seg) do { \
regs->seg = GET_SEG(seg) | 3; \
} while (0)
#ifdef CONFIG_X86_64
/*
* If regs->ss will cause an IRET fault, change it. Otherwise leave it
* alone. Using this generally makes no sense unless
* user_64bit_mode(regs) would return true.
*/
static void force_valid_ss(struct pt_regs *regs)
{
u32 ar;
asm volatile ("lar %[old_ss], %[ar]\n\t"
"jz 1f\n\t" /* If invalid: */
"xorl %[ar], %[ar]\n\t" /* set ar = 0 */
"1:"
: [ar] "=r" (ar)
: [old_ss] "rm" ((u16)regs->ss));
/*
* For a valid 64-bit user context, we need DPL 3, type
* read-write data or read-write exp-down data, and S and P
* set. We can't use VERW because VERW doesn't check the
* P bit.
*/
ar &= AR_DPL_MASK | AR_S | AR_P | AR_TYPE_MASK;
if (ar != (AR_DPL3 | AR_S | AR_P | AR_TYPE_RWDATA) &&
ar != (AR_DPL3 | AR_S | AR_P | AR_TYPE_RWDATA_EXPDOWN))
regs->ss = __USER_DS;
}
#endif
static int restore_sigcontext(struct pt_regs *regs,
struct sigcontext __user *sc,
unsigned long uc_flags)
{
unsigned long buf_val;
void __user *buf;
unsigned int tmpflags;
unsigned int err = 0;
/* Always make any pending restarted system calls return -EINTR */
current->restart_block.fn = do_no_restart_syscall;
get_user_try {
#ifdef CONFIG_X86_32
set_user_gs(regs, GET_SEG(gs));
COPY_SEG(fs);
COPY_SEG(es);
COPY_SEG(ds);
#endif /* CONFIG_X86_32 */
COPY(di); COPY(si); COPY(bp); COPY(sp); COPY(bx);
COPY(dx); COPY(cx); COPY(ip); COPY(ax);
#ifdef CONFIG_X86_64
COPY(r8);
COPY(r9);
COPY(r10);
COPY(r11);
COPY(r12);
COPY(r13);
COPY(r14);
COPY(r15);
#endif /* CONFIG_X86_64 */
COPY_SEG_CPL3(cs);
COPY_SEG_CPL3(ss);
#ifdef CONFIG_X86_64
/*
* Fix up SS if needed for the benefit of old DOSEMU and
* CRIU.
*/
if (unlikely(!(uc_flags & UC_STRICT_RESTORE_SS) &&
user_64bit_mode(regs)))
force_valid_ss(regs);
#endif
get_user_ex(tmpflags, &sc->flags);
regs->flags = (regs->flags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS);
regs->orig_ax = -1; /* disable syscall checks */
get_user_ex(buf_val, &sc->fpstate);
buf = (void __user *)buf_val;
} get_user_catch(err);
err |= fpu__restore_sig(buf, IS_ENABLED(CONFIG_X86_32));
force_iret();
return err;
}
int setup_sigcontext(struct sigcontext __user *sc, void __user *fpstate,
struct pt_regs *regs, unsigned long mask)
{
int err = 0;
put_user_try {
#ifdef CONFIG_X86_32
put_user_ex(get_user_gs(regs), (unsigned int __user *)&sc->gs);
put_user_ex(regs->fs, (unsigned int __user *)&sc->fs);
put_user_ex(regs->es, (unsigned int __user *)&sc->es);
put_user_ex(regs->ds, (unsigned int __user *)&sc->ds);
#endif /* CONFIG_X86_32 */
put_user_ex(regs->di, &sc->di);
put_user_ex(regs->si, &sc->si);
put_user_ex(regs->bp, &sc->bp);
put_user_ex(regs->sp, &sc->sp);
put_user_ex(regs->bx, &sc->bx);
put_user_ex(regs->dx, &sc->dx);
put_user_ex(regs->cx, &sc->cx);
put_user_ex(regs->ax, &sc->ax);
#ifdef CONFIG_X86_64
put_user_ex(regs->r8, &sc->r8);
put_user_ex(regs->r9, &sc->r9);
put_user_ex(regs->r10, &sc->r10);
put_user_ex(regs->r11, &sc->r11);
put_user_ex(regs->r12, &sc->r12);
put_user_ex(regs->r13, &sc->r13);
put_user_ex(regs->r14, &sc->r14);
put_user_ex(regs->r15, &sc->r15);
#endif /* CONFIG_X86_64 */
put_user_ex(current->thread.trap_nr, &sc->trapno);
put_user_ex(current->thread.error_code, &sc->err);
put_user_ex(regs->ip, &sc->ip);
#ifdef CONFIG_X86_32
put_user_ex(regs->cs, (unsigned int __user *)&sc->cs);
put_user_ex(regs->flags, &sc->flags);
put_user_ex(regs->sp, &sc->sp_at_signal);
put_user_ex(regs->ss, (unsigned int __user *)&sc->ss);
#else /* !CONFIG_X86_32 */
put_user_ex(regs->flags, &sc->flags);
put_user_ex(regs->cs, &sc->cs);
put_user_ex(0, &sc->gs);
put_user_ex(0, &sc->fs);
put_user_ex(regs->ss, &sc->ss);
#endif /* CONFIG_X86_32 */
put_user_ex(fpstate, &sc->fpstate);
/* non-iBCS2 extensions.. */
put_user_ex(mask, &sc->oldmask);
put_user_ex(current->thread.cr2, &sc->cr2);
} put_user_catch(err);
return err;
}
/*
* Set up a signal frame.
*/
/*
* Determine which stack to use..
*/
static unsigned long align_sigframe(unsigned long sp)
{
#ifdef CONFIG_X86_32
/*
* Align the stack pointer according to the i386 ABI,
* i.e. so that on function entry ((sp + 4) & 15) == 0.
*/
sp = ((sp + 4) & -16ul) - 4;
#else /* !CONFIG_X86_32 */
sp = round_down(sp, 16) - 8;
#endif
return sp;
}
static void __user *
get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size,
void __user **fpstate)
{
/* Default to using normal stack */
unsigned long math_size = 0;
unsigned long sp = regs->sp;
unsigned long buf_fx = 0;
int onsigstack = on_sig_stack(sp);
struct fpu *fpu = &current->thread.fpu;
/* redzone */
if (IS_ENABLED(CONFIG_X86_64))
sp -= 128;
/* This is the X/Open sanctioned signal stack switching. */
if (ka->sa.sa_flags & SA_ONSTACK) {
if (sas_ss_flags(sp) == 0)
sp = current->sas_ss_sp + current->sas_ss_size;
} else if (IS_ENABLED(CONFIG_X86_32) &&
!onsigstack &&
regs->ss != __USER_DS &&
!(ka->sa.sa_flags & SA_RESTORER) &&
ka->sa.sa_restorer) {
/* This is the legacy signal stack switching. */
sp = (unsigned long) ka->sa.sa_restorer;
}
if (fpu->initialized) {
sp = fpu__alloc_mathframe(sp, IS_ENABLED(CONFIG_X86_32),
&buf_fx, &math_size);
*fpstate = (void __user *)sp;
}
sp = align_sigframe(sp - frame_size);
/*
* If we are on the alternate signal stack and would overflow it, don't.
* Return an always-bogus address instead so we will die with SIGSEGV.
*/
if (onsigstack && !likely(on_sig_stack(sp)))
return (void __user *)-1L;
/* save i387 and extended state */
if (fpu->initialized &&
copy_fpstate_to_sigframe(*fpstate, (void __user *)buf_fx, math_size) < 0)
return (void __user *)-1L;
return (void __user *)sp;
}
#ifdef CONFIG_X86_32
static const struct {
u16 poplmovl;
u32 val;
u16 int80;
} __attribute__((packed)) retcode = {
0xb858, /* popl %eax; movl $..., %eax */
__NR_sigreturn,
0x80cd, /* int $0x80 */
};
static const struct {
u8 movl;
u32 val;
u16 int80;
u8 pad;
} __attribute__((packed)) rt_retcode = {
0xb8, /* movl $..., %eax */
__NR_rt_sigreturn,
0x80cd, /* int $0x80 */
0
};
static int
__setup_frame(int sig, struct ksignal *ksig, sigset_t *set,
struct pt_regs *regs)
{
struct sigframe __user *frame;
void __user *restorer;
int err = 0;
void __user *fpstate = NULL;
frame = get_sigframe(&ksig->ka, regs, sizeof(*frame), &fpstate);
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
return -EFAULT;
if (__put_user(sig, &frame->sig))
return -EFAULT;
if (setup_sigcontext(&frame->sc, fpstate, regs, set->sig[0]))
return -EFAULT;
if (_NSIG_WORDS > 1) {
if (__copy_to_user(&frame->extramask, &set->sig[1],
sizeof(frame->extramask)))
return -EFAULT;
}
if (current->mm->context.vdso)
restorer = current->mm->context.vdso +
vdso_image_32.sym___kernel_sigreturn;
else
restorer = &frame->retcode;
if (ksig->ka.sa.sa_flags & SA_RESTORER)
restorer = ksig->ka.sa.sa_restorer;
/* Set up to return from userspace. */
err |= __put_user(restorer, &frame->pretcode);
/*
* This is popl %eax ; movl $__NR_sigreturn, %eax ; int $0x80
*
* WE DO NOT USE IT ANY MORE! It's only left here for historical
* reasons and because gdb uses it as a signature to notice
* signal handler stack frames.
*/
err |= __put_user(*((u64 *)&retcode), (u64 *)frame->retcode);
if (err)
return -EFAULT;
/* Set up registers for signal handler */
regs->sp = (unsigned long)frame;
regs->ip = (unsigned long)ksig->ka.sa.sa_handler;
regs->ax = (unsigned long)sig;
regs->dx = 0;
regs->cx = 0;
regs->ds = __USER_DS;
regs->es = __USER_DS;
regs->ss = __USER_DS;
regs->cs = __USER_CS;
return 0;
}
static int __setup_rt_frame(int sig, struct ksignal *ksig,
sigset_t *set, struct pt_regs *regs)
{
struct rt_sigframe __user *frame;
void __user *restorer;
int err = 0;
void __user *fpstate = NULL;
frame = get_sigframe(&ksig->ka, regs, sizeof(*frame), &fpstate);
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
return -EFAULT;
put_user_try {
put_user_ex(sig, &frame->sig);
put_user_ex(&frame->info, &frame->pinfo);
put_user_ex(&frame->uc, &frame->puc);
/* Create the ucontext. */
if (boot_cpu_has(X86_FEATURE_XSAVE))
put_user_ex(UC_FP_XSTATE, &frame->uc.uc_flags);
else
put_user_ex(0, &frame->uc.uc_flags);
put_user_ex(0, &frame->uc.uc_link);
save_altstack_ex(&frame->uc.uc_stack, regs->sp);
/* Set up to return from userspace. */
restorer = current->mm->context.vdso +
vdso_image_32.sym___kernel_rt_sigreturn;
if (ksig->ka.sa.sa_flags & SA_RESTORER)
restorer = ksig->ka.sa.sa_restorer;
put_user_ex(restorer, &frame->pretcode);
/*
* This is movl $__NR_rt_sigreturn, %ax ; int $0x80
*
* WE DO NOT USE IT ANY MORE! It's only left here for historical
* reasons and because gdb uses it as a signature to notice
* signal handler stack frames.
*/
put_user_ex(*((u64 *)&rt_retcode), (u64 *)frame->retcode);
} put_user_catch(err);
err |= copy_siginfo_to_user(&frame->info, &ksig->info);
err |= setup_sigcontext(&frame->uc.uc_mcontext, fpstate,
regs, set->sig[0]);
err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
if (err)
return -EFAULT;
/* Set up registers for signal handler */
regs->sp = (unsigned long)frame;
regs->ip = (unsigned long)ksig->ka.sa.sa_handler;
regs->ax = (unsigned long)sig;
regs->dx = (unsigned long)&frame->info;
regs->cx = (unsigned long)&frame->uc;
regs->ds = __USER_DS;
regs->es = __USER_DS;
regs->ss = __USER_DS;
regs->cs = __USER_CS;
return 0;
}
#else /* !CONFIG_X86_32 */
static unsigned long frame_uc_flags(struct pt_regs *regs)
{
unsigned long flags;
if (boot_cpu_has(X86_FEATURE_XSAVE))
flags = UC_FP_XSTATE | UC_SIGCONTEXT_SS;
else
flags = UC_SIGCONTEXT_SS;
if (likely(user_64bit_mode(regs)))
flags |= UC_STRICT_RESTORE_SS;
return flags;
}
static int __setup_rt_frame(int sig, struct ksignal *ksig,
sigset_t *set, struct pt_regs *regs)
{
struct rt_sigframe __user *frame;
void __user *fp = NULL;
int err = 0;
frame = get_sigframe(&ksig->ka, regs, sizeof(struct rt_sigframe), &fp);
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
return -EFAULT;
if (ksig->ka.sa.sa_flags & SA_SIGINFO) {
if (copy_siginfo_to_user(&frame->info, &ksig->info))
return -EFAULT;
}
put_user_try {
/* Create the ucontext. */
put_user_ex(frame_uc_flags(regs), &frame->uc.uc_flags);
put_user_ex(0, &frame->uc.uc_link);
save_altstack_ex(&frame->uc.uc_stack, regs->sp);
/* Set up to return from userspace. If provided, use a stub
already in userspace. */
/* x86-64 should always use SA_RESTORER. */
if (ksig->ka.sa.sa_flags & SA_RESTORER) {
put_user_ex(ksig->ka.sa.sa_restorer, &frame->pretcode);
} else {
/* could use a vstub here */
err |= -EFAULT;
}
} put_user_catch(err);
err |= setup_sigcontext(&frame->uc.uc_mcontext, fp, regs, set->sig[0]);
err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
if (err)
return -EFAULT;
/* Set up registers for signal handler */
regs->di = sig;
/* In case the signal handler was declared without prototypes */
regs->ax = 0;
/* This also works for non SA_SIGINFO handlers because they expect the
next argument after the signal number on the stack. */
regs->si = (unsigned long)&frame->info;
regs->dx = (unsigned long)&frame->uc;
regs->ip = (unsigned long) ksig->ka.sa.sa_handler;
regs->sp = (unsigned long)frame;
/*
* Set up the CS and SS registers to run signal handlers in
* 64-bit mode, even if the handler happens to be interrupting
* 32-bit or 16-bit code.
*
* SS is subtle. In 64-bit mode, we don't need any particular
* SS descriptor, but we do need SS to be valid. It's possible
* that the old SS is entirely bogus -- this can happen if the
* signal we're trying to deliver is #GP or #SS caused by a bad
* SS value. We also have a compatbility issue here: DOSEMU
* relies on the contents of the SS register indicating the
* SS value at the time of the signal, even though that code in
* DOSEMU predates sigreturn's ability to restore SS. (DOSEMU
* avoids relying on sigreturn to restore SS; instead it uses
* a trampoline.) So we do our best: if the old SS was valid,
* we keep it. Otherwise we replace it.
*/
regs->cs = __USER_CS;
if (unlikely(regs->ss != __USER_DS))
force_valid_ss(regs);
return 0;
}
#endif /* CONFIG_X86_32 */
static int x32_setup_rt_frame(struct ksignal *ksig,
compat_sigset_t *set,
struct pt_regs *regs)
{
#ifdef CONFIG_X86_X32_ABI
struct rt_sigframe_x32 __user *frame;
void __user *restorer;
int err = 0;
void __user *fpstate = NULL;
frame = get_sigframe(&ksig->ka, regs, sizeof(*frame), &fpstate);
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
return -EFAULT;
if (ksig->ka.sa.sa_flags & SA_SIGINFO) {
if (__copy_siginfo_to_user32(&frame->info, &ksig->info, true))
return -EFAULT;
}
put_user_try {
/* Create the ucontext. */
put_user_ex(frame_uc_flags(regs), &frame->uc.uc_flags);
put_user_ex(0, &frame->uc.uc_link);
compat_save_altstack_ex(&frame->uc.uc_stack, regs->sp);
put_user_ex(0, &frame->uc.uc__pad0);
if (ksig->ka.sa.sa_flags & SA_RESTORER) {
restorer = ksig->ka.sa.sa_restorer;
} else {
/* could use a vstub here */
restorer = NULL;
err |= -EFAULT;
}
put_user_ex(restorer, &frame->pretcode);
} put_user_catch(err);
err |= setup_sigcontext(&frame->uc.uc_mcontext, fpstate,
regs, set->sig[0]);
err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
if (err)
return -EFAULT;
/* Set up registers for signal handler */
regs->sp = (unsigned long) frame;
regs->ip = (unsigned long) ksig->ka.sa.sa_handler;
/* We use the x32 calling convention here... */
regs->di = ksig->sig;
regs->si = (unsigned long) &frame->info;
regs->dx = (unsigned long) &frame->uc;
loadsegment(ds, __USER_DS);
loadsegment(es, __USER_DS);
regs->cs = __USER_CS;
regs->ss = __USER_DS;
#endif /* CONFIG_X86_X32_ABI */
return 0;
}
/*
* Do a signal return; undo the signal stack.
*/
#ifdef CONFIG_X86_32
asmlinkage unsigned long sys_sigreturn(void)
{
struct pt_regs *regs = current_pt_regs();
struct sigframe __user *frame;
sigset_t set;
frame = (struct sigframe __user *)(regs->sp - 8);
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
goto badframe;
if (__get_user(set.sig[0], &frame->sc.oldmask) || (_NSIG_WORDS > 1
&& __copy_from_user(&set.sig[1], &frame->extramask,
sizeof(frame->extramask))))
goto badframe;
set_current_blocked(&set);
/*
* x86_32 has no uc_flags bits relevant to restore_sigcontext.
* Save a few cycles by skipping the __get_user.
*/
if (restore_sigcontext(regs, &frame->sc, 0))
goto badframe;
return regs->ax;
badframe:
signal_fault(regs, frame, "sigreturn");
return 0;
}
#endif /* CONFIG_X86_32 */
asmlinkage long sys_rt_sigreturn(void)
{
struct pt_regs *regs = current_pt_regs();
struct rt_sigframe __user *frame;
sigset_t set;
unsigned long uc_flags;
frame = (struct rt_sigframe __user *)(regs->sp - sizeof(long));
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
goto badframe;
if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
goto badframe;
if (__get_user(uc_flags, &frame->uc.uc_flags))
goto badframe;
set_current_blocked(&set);
if (restore_sigcontext(regs, &frame->uc.uc_mcontext, uc_flags))
goto badframe;
if (restore_altstack(&frame->uc.uc_stack))
goto badframe;
return regs->ax;
badframe:
signal_fault(regs, frame, "rt_sigreturn");
return 0;
}
static inline int is_ia32_compat_frame(struct ksignal *ksig)
{
return IS_ENABLED(CONFIG_IA32_EMULATION) &&
ksig->ka.sa.sa_flags & SA_IA32_ABI;
}
static inline int is_ia32_frame(struct ksignal *ksig)
{
return IS_ENABLED(CONFIG_X86_32) || is_ia32_compat_frame(ksig);
}
static inline int is_x32_frame(struct ksignal *ksig)
{
return IS_ENABLED(CONFIG_X86_X32_ABI) &&
ksig->ka.sa.sa_flags & SA_X32_ABI;
}
static int
setup_rt_frame(struct ksignal *ksig, struct pt_regs *regs)
{
int usig = ksig->sig;
sigset_t *set = sigmask_to_save();
compat_sigset_t *cset = (compat_sigset_t *) set;
/* Set up the stack frame */
if (is_ia32_frame(ksig)) {
if (ksig->ka.sa.sa_flags & SA_SIGINFO)
return ia32_setup_rt_frame(usig, ksig, cset, regs);
else
return ia32_setup_frame(usig, ksig, cset, regs);
} else if (is_x32_frame(ksig)) {
return x32_setup_rt_frame(ksig, cset, regs);
} else {
return __setup_rt_frame(ksig->sig, ksig, set, regs);
}
}
static void
handle_signal(struct ksignal *ksig, struct pt_regs *regs)
{
bool stepping, failed;
struct fpu *fpu = &current->thread.fpu;
if (v8086_mode(regs))
save_v86_state((struct kernel_vm86_regs *) regs, VM86_SIGNAL);
/* Are we from a system call? */
if (syscall_get_nr(current, regs) >= 0) {
/* If so, check system call restarting.. */
switch (syscall_get_error(current, regs)) {
case -ERESTART_RESTARTBLOCK:
case -ERESTARTNOHAND:
regs->ax = -EINTR;
break;
case -ERESTARTSYS:
if (!(ksig->ka.sa.sa_flags & SA_RESTART)) {
regs->ax = -EINTR;
break;
}
/* fallthrough */
case -ERESTARTNOINTR:
regs->ax = regs->orig_ax;
regs->ip -= 2;
break;
}
}
/*
* If TF is set due to a debugger (TIF_FORCED_TF), clear TF now
* so that register information in the sigcontext is correct and
* then notify the tracer before entering the signal handler.
*/
stepping = test_thread_flag(TIF_SINGLESTEP);
if (stepping)
user_disable_single_step(current);
failed = (setup_rt_frame(ksig, regs) < 0);
if (!failed) {
/*
* Clear the direction flag as per the ABI for function entry.
*
* Clear RF when entering the signal handler, because
* it might disable possible debug exception from the
* signal handler.
*
* Clear TF for the case when it wasn't set by debugger to
* avoid the recursive send_sigtrap() in SIGTRAP handler.
*/
regs->flags &= ~(X86_EFLAGS_DF|X86_EFLAGS_RF|X86_EFLAGS_TF);
/*
* Ensure the signal handler starts with the new fpu state.
*/
if (fpu->initialized)
fpu__clear(fpu);
}
signal_setup_done(failed, ksig, stepping);
}
static inline unsigned long get_nr_restart_syscall(const struct pt_regs *regs)
{
/*
* This function is fundamentally broken as currently
* implemented.
*
* The idea is that we want to trigger a call to the
* restart_block() syscall and that we want in_ia32_syscall(),
* in_x32_syscall(), etc. to match whatever they were in the
* syscall being restarted. We assume that the syscall
* instruction at (regs->ip - 2) matches whatever syscall
* instruction we used to enter in the first place.
*
* The problem is that we can get here when ptrace pokes
* syscall-like values into regs even if we're not in a syscall
* at all.
*
* For now, we maintain historical behavior and guess based on
* stored state. We could do better by saving the actual
* syscall arch in restart_block or (with caveats on x32) by
* checking if regs->ip points to 'int $0x80'. The current
* behavior is incorrect if a tracer has a different bitness
* than the tracee.
*/
#ifdef CONFIG_IA32_EMULATION
if (current->thread.status & (TS_COMPAT|TS_I386_REGS_POKED))
return __NR_ia32_restart_syscall;
#endif
#ifdef CONFIG_X86_X32_ABI
return __NR_restart_syscall | (regs->orig_ax & __X32_SYSCALL_BIT);
#else
return __NR_restart_syscall;
#endif
}
/*
* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*/
void do_signal(struct pt_regs *regs)
{
struct ksignal ksig;
if (get_signal(&ksig)) {
/* Whee! Actually deliver the signal. */
handle_signal(&ksig, regs);
return;
}
/* Did we come from a system call? */
if (syscall_get_nr(current, regs) >= 0) {
/* Restart the system call - no handlers present */
switch (syscall_get_error(current, regs)) {
case -ERESTARTNOHAND:
case -ERESTARTSYS:
case -ERESTARTNOINTR:
regs->ax = regs->orig_ax;
regs->ip -= 2;
break;
case -ERESTART_RESTARTBLOCK:
regs->ax = get_nr_restart_syscall(regs);
regs->ip -= 2;
break;
}
}
/*
* If there's no signal to deliver, we just put the saved sigmask
* back.
*/
restore_saved_sigmask();
}
void signal_fault(struct pt_regs *regs, void __user *frame, char *where)
{
struct task_struct *me = current;
if (show_unhandled_signals && printk_ratelimit()) {
printk("%s"
"%s[%d] bad frame in %s frame:%p ip:%lx sp:%lx orax:%lx",
task_pid_nr(current) > 1 ? KERN_INFO : KERN_EMERG,
me->comm, me->pid, where, frame,
regs->ip, regs->sp, regs->orig_ax);
print_vma_addr(KERN_CONT " in ", regs->ip);
pr_cont("\n");
}
force_sig(SIGSEGV, me);
}
#ifdef CONFIG_X86_X32_ABI
asmlinkage long sys32_x32_rt_sigreturn(void)
{
struct pt_regs *regs = current_pt_regs();
struct rt_sigframe_x32 __user *frame;
sigset_t set;
unsigned long uc_flags;
frame = (struct rt_sigframe_x32 __user *)(regs->sp - 8);
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
goto badframe;
if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
goto badframe;
if (__get_user(uc_flags, &frame->uc.uc_flags))
goto badframe;
set_current_blocked(&set);
if (restore_sigcontext(regs, &frame->uc.uc_mcontext, uc_flags))
goto badframe;
if (compat_restore_altstack(&frame->uc.uc_stack))
goto badframe;
return regs->ax;
badframe:
signal_fault(regs, frame, "x32 rt_sigreturn");
return 0;
}
#endif
View Git Blame Copy Permalink