AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
a21e0030d6
kernel_optimize_test/arch/arm/mach-pxa
History
Linus Torvalds dca1d9f6d7 Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm 
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (370 commits)
  ARM: S3C2443: Add set_rate and round_rate calls for armdiv clock
  ARM: S3C2443: Remove #if 0 for clk_mpll
  ARM: S3C2443: Update notes on MPLLREF clock
  ARM: S3C2443: Further clksrc-clk conversions
  ARM: S3C2443: Change to using plat-samsung clksrc-clk implementation
  USB: Fix s3c-hsotg build following Samsung platform header moves
  ARM: S3C64XX: Reintroduce unconditional build of audio device
  ARM: 5961/1: ux500: fix CLKRST addresses
  ARM: 5977/1: arm: Enable backtrace printing on oops when PC is corrupted
  ASoC: Fix S3C64xx IIS driver for Samsung header reorg
  ARM: S3C2440: Fix plat-s3c24xx move of s3c2440/s3c2442 support
  [ARM] pxa: fix typo in mxm8x10.h
  [ARM] pxa/raumfeld: set GPIO drive bits for LED pins
  [ARM] pxa/zeus: Add support for mcp2515 CAN bus
  [ARM] pxa/zeus: Add support for onboard max6369 watchdog
  [ARM] pxa/zeus: Add Eurotech as the manufacturer
  [ARM] pxa/zeus: Correct the USB host initialisation flags
  [ARM] pxa/zeus: Allow usage of 8250-compatible UART in uncompress
  [ARM] pxa: refactor uncompress.h for non-PXA uarts
  [ARM] mmp2: fix incorrect calling of chip->mask_ack() for 2nd level cascaded IRQs
  ...
2010-03-12 16:00:54 -08:00
..
include/mach Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm 2010-03-12 16:00:54 -08:00
am200epd.c
am300epd.c broadsheetfb: add multiple panel type support 2010-03-12 15:52:32 -08:00
balloon3.c [ARM] pxa: add the missing AC97 pin configurations 2010-03-02 07:40:48 +08:00
capc7117.c [ARM] pxa: add support for Embedian MXM-8x10 2010-03-02 07:40:51 +08:00
clock.c ARM: Consolidate clks_register() and similar 2010-02-12 17:32:36 +00:00
clock.h ARM: Consolidate clks_register() and similar 2010-02-12 17:32:36 +00:00
cm-x2xx-pci.c [ARM] pxa: use chip->ack() instead of accessing GEDR directly 2010-03-02 07:40:45 +08:00
cm-x2xx-pci.h
cm-x2xx.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
cm-x255.c [ARM] pxa: simplify the LCD pin configuration for pxa25x platforms 2010-03-02 07:40:46 +08:00
cm-x270.c [ARM] pxa/cm-x270: avoid direct access of GPIO/MFP registers 2010-03-02 07:40:48 +08:00
cm-x300.c [ARM] pxa/cm-x300: add PWM backlight support 2009-12-16 16:49:22 +08:00
colibri-pxa3xx.c pxa3xx_nand: move pxa3xx_nand.h common into plat directory 2009-12-01 09:02:43 +08:00
colibri-pxa270.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
colibri-pxa300.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
colibri-pxa320.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
corgi_lcd.c
corgi_pm.c [ARM] pxa/zaurus: rename spitz_battery_levels_* to sharpsl_* 2009-12-01 09:03:01 +08:00
corgi_ssp.c platform-drivers: move probe to .devinit.text in arch/arm 2010-03-07 17:04:50 -08:00
corgi.c [ARM] pxa/corgi: fix incorrect default GPIO for UDC Vbus 2010-01-13 21:01:08 +08:00
cpufreq-pxa2xx.c [ARM] pxa/cpufreq: fix index assignments for end marker 2009-11-20 14:23:13 -06:00
cpufreq-pxa3xx.c [ARM] pxa/cpufreq: fix index assignments for end marker 2009-11-20 14:23:13 -06:00
csb701.c
csb726.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
devices.c [ARM] pxa: fix no reference of cpu_is_pxa25x() in devices.c 2009-12-16 21:35:52 +08:00
devices.h [ARM] pxa: add device definition for graphics controller 2009-09-10 18:49:27 +08:00
e330.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
e350.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
e400.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
e740.c [ARM] pxa: add the missing AC97 pin configurations 2010-03-02 07:40:48 +08:00
e750.c [ARM] pxa: add the missing AC97 pin configurations 2010-03-02 07:40:48 +08:00
e800.c [ARM] pxa: add the missing AC97 pin configurations 2010-03-02 07:40:48 +08:00
em-x270.c [ARM] pxa: simplify the LCD pin configuration for pxa27x platforms 2010-03-02 07:40:47 +08:00
eseries.c ARM: Consolidate clks_register() and similar 2010-02-12 17:32:36 +00:00
eseries.h
ezx.c [ARM] pxa/ezx: add leds-lp3944 support for A910 EZX phone 2009-12-01 09:03:03 +08:00
generic.c
generic.h [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
gumstix.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
h5000.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
himalaya.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
hx4700.c [ARM] pxa/hx4700: actually use platform_lcd driver 2009-12-01 09:03:15 +08:00
icontrol.c [ARM] pxa: add support for Embedian MXM-8x10 2010-03-02 07:40:51 +08:00
idp.c [ARM] pxa: simplify the LCD pin configuration for pxa25x platforms 2010-03-02 07:40:46 +08:00
imote2.c [ARM] pxa/imote2: Remove redundant pin entry for nCS. 2010-03-02 07:40:53 +08:00
irq.c [ARM] pxa: fix irq suspend/resume for pxa25x 2010-01-13 21:01:09 +08:00
Kconfig [ARM] pxa: introduce PXA_SSP_LEGACY for legacy SSP API 2010-03-02 07:40:52 +08:00
leds-idp.c
leds-lubbock.c
leds-mainstone.c
leds.c
leds.h
littleton.c [ARM] pxa/littleton: add UART3 GPIO config 2009-12-29 14:11:28 +08:00
lpd270.c [ARM] pxa: add the missing AC97 pin configurations 2010-03-02 07:40:48 +08:00
lubbock.c [ARM] sa1111: allow cascaded IRQs to be used by platforms 2010-03-02 07:40:51 +08:00
magician.c [ARM] pxa: simplify the LCD pin configuration for pxa27x platforms 2010-03-02 07:40:47 +08:00
mainstone.c [ARM] pxa: add the missing AC97 pin configurations 2010-03-02 07:40:48 +08:00
Makefile [ARM] pxa: add support for Embedian MXM-8x10 2010-03-02 07:40:51 +08:00
Makefile.boot
mfp-pxa2xx.c [ARM] pxa: enable GPIO receivers after configuring pins 2009-05-18 21:52:09 +08:00
mfp-pxa3xx.c
mioa701_bootresume.S
mioa701.c [ARM] pxa: add the missing AC97 pin configurations 2010-03-02 07:40:48 +08:00
mp900.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
mxm8x10.c [ARM] pxa: add support for Embedian MXM-8x10 2010-03-02 07:40:51 +08:00
palmld.c [ARM] pxa: simplify the LCD pin configuration for pxa27x platforms 2010-03-02 07:40:47 +08:00
palmt5.c [ARM] pxa: simplify the LCD pin configuration for pxa27x platforms 2010-03-02 07:40:47 +08:00
palmtc.c [ARM] pxa: simplify the LCD pin configuration for pxa25x platforms 2010-03-02 07:40:46 +08:00
palmte2.c [ARM] pxa: simplify the LCD pin configuration for pxa25x platforms 2010-03-02 07:40:46 +08:00
palmtreo.c [ARM] pxa: simplify the LCD pin configuration for pxa27x platforms 2010-03-02 07:40:47 +08:00
palmtx.c [ARM] pxa: simplify the LCD pin configuration for pxa27x platforms 2010-03-02 07:40:47 +08:00
palmz72.c [ARM] pxa: simplify the LCD pin configuration for pxa27x platforms 2010-03-02 07:40:47 +08:00
pcm027.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
pcm990-baseboard.c [ARM] pxa: add the missing AC97 pin configurations 2010-03-02 07:40:48 +08:00
pm.c [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines 2009-06-11 23:25:09 +08:00
poodle.c [ARM] locomo: allow cascaded IRQ base to be specified by platforms 2010-03-02 07:40:50 +08:00
pxa2xx.c [ARM] pxa: add gpio_pwdown(_inverted) into pxaficp_ir.c 2009-09-10 18:49:39 +08:00
pxa3xx.c ARM: Consolidate clks_register() and similar 2010-02-12 17:32:36 +00:00
pxa25x.c ARM: Consolidate clks_register() and similar 2010-02-12 17:32:36 +00:00
pxa27x.c Merge branch 'origin' into devel-stable 2010-03-08 20:21:04 +00:00
pxa300.c ARM: Consolidate clks_register() and similar 2010-02-12 17:32:36 +00:00
pxa320.c ARM: Consolidate clks_register() and similar 2010-02-12 17:32:36 +00:00
pxa930.c [ARM] pxa: support mfp of pxa935 2009-09-10 18:49:24 +08:00
raumfeld.c [ARM] pxa/raumfeld: set GPIO drive bits for LED pins 2010-03-02 07:40:59 +08:00
reset.c [ARM] pxa: allow gpio_reset drive high during normal work 2009-05-18 21:52:09 +08:00
saar.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
sharpsl_pm.c platform-drivers: move probe to .devinit.text in arch/arm 2010-03-07 17:04:50 -08:00
sharpsl.h [ARM] pxa/zaurus: rename spitz_battery_levels_* to sharpsl_* 2009-12-01 09:03:01 +08:00
sleep.S
smemc.c
spitz_pm.c [ARM] pxa/zaurus: rename spitz_battery_levels_* to sharpsl_* 2009-12-01 09:03:01 +08:00
spitz.c [ARM] pxa: simplify the LCD pin configuration for pxa27x platforms 2010-03-02 07:40:47 +08:00
ssp.c [ARM] pxa: introduce PXA_SSP_LEGACY for legacy SSP API 2010-03-02 07:40:52 +08:00
standby.S
stargate2.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
tavorevb.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
time.c arm/{pxa,sa1100,nomadik}: Don't disable irqs in set_next_event and set_mode 2010-01-22 17:04:52 +01:00
tosa-bt.c rfkill: rewrite 2009-06-03 14:06:13 -04:00
tosa.c [ARM] pxa/tosa: make use of the matrix keypad driver 2010-03-02 07:40:48 +08:00
trizeps4.c [ARM] pxa: add the missing AC97 pin configurations 2010-03-02 07:40:48 +08:00
viper.c [ARM] pxa: add the missing AC97 pin configurations 2010-03-02 07:40:48 +08:00
xcep.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
zeus.c [ARM] pxa/zeus: Add support for mcp2515 CAN bus 2010-03-02 07:40:59 +08:00
zylonite_pxa300.c [ARM] pxa/zylonite: simplify reduntant gpio settings on mmc slot 2009-12-29 14:11:34 +08:00
zylonite_pxa320.c [ARM] pxa/zylonite: simplify reduntant gpio settings on mmc slot 2009-12-29 14:11:34 +08:00
zylonite.c [ARM] pxa/zylonite: simplify reduntant gpio settings on mmc slot 2009-12-29 14:11:34 +08:00