kernel_optimize_test/drivers/mfd
Jorge Eduardo Candelaria a2974732ca TPS65911: Add new irq definitions
TPS65911 adds new interrupt sources, as well as two new registers
to handle them, one for interrupt status and one for interrupt
masking. The added irqs are:

-VMBCH2 - Low and High threshold
-GPIO1-8 - Rising and falling edge detection
-WTCHDG - Watchdog interrupt
-PWRDN	- PWRDN reset interrupt

The code should handle these new registers only when the chip
version is TPS65911.

Signed-off-by: Jorge Eduardo Candelaria <jedu@slimlogic.co.uk>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-05-27 10:49:10 +01:00
..
88pm860x-core.c mfd: Avoid to use constraint name in 88pm860x regulator driver 2011-05-26 19:45:38 +02:00
88pm860x-i2c.c mfd: Append additional read write on 88pm860x 2011-03-23 10:42:07 +01:00
ab3100-core.c mfd: Use mfd cell platform_data for ab3100 cells platform bits 2011-05-26 19:44:58 +02:00
ab3100-otp.c
ab3550-core.c mfd: Use mfd cell platform_data for ab3550 cells platform bits 2011-05-26 19:44:57 +02:00
ab8500-core.c mfd: Provide ab8500-core enumerators for chip cuts 2011-05-26 19:45:42 +02:00
ab8500-debugfs.c mfd: ab8500: world-writable debugfs register-* files 2011-03-23 10:41:48 +01:00
ab8500-gpadc.c mfd: Correct the name and bitmask for ab8500-gpadc BTempPullUp 2011-05-26 19:45:44 +02:00
ab8500-i2c.c mach-ux500: move the DB8500 PRCMU driver to MFD 2011-05-24 22:14:31 +02:00
ab8500-sysctrl.c mfd: AB8500 system control driver 2011-03-23 10:41:47 +01:00
abx500-core.c
adp5520.c mfd: Convert adp5520 to dev_pm_ops 2011-03-23 10:41:43 +01:00
asic3.c mfd: Fix ASIC3 SD Host Controller Configuration size 2011-05-26 19:45:51 +02:00
cs5535-mfd.c mfd: OLPC: Clean up names to match what OLPC actually uses 2011-03-27 00:09:31 +01:00
da903x.c
davinci_voicecodec.c mfd: Use mfd cell platform_data for davinci cells platform bits 2011-05-26 19:45:13 +02:00
db5500-prcmu-regs.h mfd: add DB5500 PRCMU driver 2011-05-24 22:19:37 +02:00
db5500-prcmu.c mfd: add DB5500 PRCMU driver 2011-05-24 22:19:37 +02:00
db8500-prcmu-regs.h mfd: update DB8500 PRCMU driver 2011-05-24 22:18:57 +02:00
db8500-prcmu.c mach-ux500: voltage domain regulators for DB8500 2011-05-24 22:20:23 +02:00
dm355evm_msp.c
ezx-pcap.c Fix common misspellings 2011-03-31 11:26:23 -03:00
htc-egpio.c mfd: Fold irq_set_chip/irq_set_handler 2011-03-27 00:09:52 +01:00
htc-i2cpld.c mfd: Fold irq_set_chip/irq_set_handler 2011-03-27 00:09:52 +01:00
htc-pasic3.c mfd: Pass htc-pasic3 led platform data through the cell platform_data 2011-05-26 19:45:01 +02:00
janz-cmodio.c mfd: Use mfd cell platform_data for janz cells platform bits 2011-05-26 19:45:08 +02:00
jz4740-adc.c mfd: Cleanup irq namespace 2011-03-27 00:09:51 +01:00
Kconfig linux-next: build failure after merge of the voltage tree 2011-05-27 10:49:09 +01:00
lpc_sch.c mfd: Add Tunnel Creek support to lpc_sch 2011-03-23 10:42:08 +01:00
Makefile TPS65910: IRQ: Add interrupt controller 2011-05-27 10:48:43 +01:00
max8925-core.c mfd: Remove checking on max8925 regulator[0] 2011-05-26 19:45:37 +02:00
max8925-i2c.c
max8997-irq.c mfd: Clean up max8997 IRQ namespace 2011-03-27 00:09:53 +01:00
max8997.c mfd: MAX8997/8966 support 2011-03-23 10:42:03 +01:00
max8998-irq.c mfd: Cleanup irq namespace 2011-03-27 00:09:51 +01:00
max8998.c mfd: Cleanup irq namespace 2011-03-27 00:09:51 +01:00
mc13xxx-core.c mfd: Use mfd cell platform_data for mc13xxx cells platform bits 2011-05-26 19:45:07 +02:00
mcp-core.c
mcp-sa11x0.c
menelaus.c
mfd-core.c mfd: Add platform data pointer back 2011-05-26 19:44:56 +02:00
omap-usb-host.c mfd: Add omap-usbhs runtime PM support 2011-05-26 19:45:52 +02:00
pcf50633-adc.c
pcf50633-core.c Fix common misspellings 2011-03-31 11:26:23 -03:00
pcf50633-gpio.c
pcf50633-irq.c
pm8xxx-irq.c mfd: Add pm8xxx irq support 2011-05-26 19:45:28 +02:00
pm8921-core.c mfd: Add pm8xxx irq support 2011-05-26 19:45:28 +02:00
rdc321x-southbridge.c mfd: Use mfd cell platform_data for rdc321x cells platform bits 2011-05-26 19:45:06 +02:00
sm501.c video, sm501: add OF binding to support SM501 2011-03-22 17:17:14 +09:00
stmpe.c mfd: Cleanup irq namespace 2011-03-27 00:09:51 +01:00
stmpe.h
t7l66xb.c mtd: Use platform_data to retrieve tmio_nand platform bits 2011-05-26 19:45:04 +02:00
tc3589x.c mfd: Cleanup irq namespace 2011-03-27 00:09:51 +01:00
tc6387xb.c mmc: Use device platform_data to retrieve tmio_mmc platform bits 2011-05-26 19:44:59 +02:00
tc6393xb.c mtd: Use platform_data to retrieve tmio_nand platform bits 2011-05-26 19:45:04 +02:00
ti-ssp.c mfd: add driver for sequencer serial port 2011-03-15 08:17:22 -07:00
timberdale.c mfd: Use mfd cell platform_data for timberdale cells platform bits 2011-05-26 19:45:05 +02:00
timberdale.h
tmio_core.c
tps6105x.c mfd: Use mfd cell platform_data for tps6105x cells platform bits 2011-05-26 19:45:11 +02:00
tps6507x.c
tps6586x.c mfd: Fix tps6586x GPIO value setting 2011-05-26 19:45:31 +02:00
tps65010.c mfd: Include <linux/gpio.h> instead of <asm/gpio.h> 2011-01-14 12:37:36 +01:00
tps65910-gpio.c TPS65910: GPIO: Add GPIO driver 2011-05-27 10:48:23 +01:00
tps65910-irq.c TPS65911: Add new irq definitions 2011-05-27 10:49:10 +01:00
tps65910.c MFD: TPS65910: Add support for TPS65911 device 2011-05-27 10:49:10 +01:00
twl4030-codec.c mfd: Update twl4030-code maintainer e-mail address 2011-05-26 19:45:45 +02:00
twl4030-irq.c mfd: Cleanup irq namespace 2011-03-27 00:09:51 +01:00
twl4030-madc.c mfd: Add "platform:" prefix for twl4030-madc platform modalias 2011-03-23 10:42:05 +01:00
twl4030-power.c mfd: Check twl4030-power remove script error condition after i2cwrite 2011-05-26 19:45:41 +02:00
twl6030-irq.c mfd: Fix twl6030 irq definitions 2011-05-26 19:45:40 +02:00
twl6030-pwm.c
twl-core.c mfd: Add phoenix lite (twl6025) support to twl6030 2011-05-26 19:45:39 +02:00
twl-core.h
ucb1x00-assabet.c
ucb1x00-core.c
ucb1x00-ts.c mfd: Add BTN_TOUCH event to ucb1x00-ts 2011-03-23 10:41:45 +01:00
ucb1400_core.c Fix common misspellings 2011-03-31 11:26:23 -03:00
vx855.c mfd: Add MODULE_DEVICE_TABLE to vx855 2011-03-23 10:41:59 +01:00
wl1273-core.c mfd: Fix wl1273 warning 2011-05-26 19:45:20 +02:00
wm831x-core.c mfd: Provide platform data for WM831x GPIO configuration 2011-05-26 19:45:18 +02:00
wm831x-i2c.c mfd: Remove copy from WM831x I2C write function 2011-03-23 10:42:09 +01:00
wm831x-irq.c mfd: Continue with IRQ setup even if we don't have PMIC main IRQ 2011-05-26 19:45:19 +02:00
wm831x-otp.c
wm831x-spi.c mfd: Convert WM831x SPI to use dev_pm_ops 2011-03-23 10:41:45 +01:00
wm8350-core.c
wm8350-gpio.c
wm8350-i2c.c
wm8350-irq.c mfd: Cleanup irq namespace 2011-03-27 00:09:51 +01:00
wm8350-regmap.c
wm8400-core.c mfd: Use mfd cell platform_data for wm8400 cells platform bits 2011-05-26 19:45:14 +02:00
wm8994-core.c mfd: Push byte swaps out of wm8994 bulk read path 2011-03-23 10:42:11 +01:00
wm8994-irq.c mfd: Cleanup irq namespace 2011-03-27 00:09:51 +01:00