kernel_optimize_test/drivers/tty/serial
Anirudha Sarangi a3081893ca serial: xuartps: Do not enable parity error interrupt
The patch makes changes not to enable parity error interrupt.
With the current implementation, each parity error results in
two distinct interrupts (almost always). The first one is normal
parity error interrupt with no data in the fifo and the second one
is a proper Rx interrupt with the received data in the fifo. By
disabling parity error interrupt we still ensure handling of
parity errors as for the Rx fifo interrupt the parity error still
shows up in the interrupt status register. Considering the fact
that the by default INPCK and IGNPAR are not set, this is the
optimal implementation for parity error handling.

Signed-off-by: Anirudha Sarangi <anirudh@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
[stelford@cadence.com: cherry picked from
https://github.com/Xilinx/linux-xlnx commit
bf9f610b445e2c9ed33c41e1e0e30b43be4e1f97 with manual conflict
resolution]
Signed-off-by: Scott Telford <stelford@cadence.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-22 11:49:55 +02:00
..
8250 tty/serial/8250: Touch NMI watchdog in wait_for_xmitr 2016-09-22 11:45:08 +02:00
cpm_uart
jsm tty: serial: jsm_tty: constify uart_ops structures 2016-09-02 15:01:16 +02:00
21285.c
altera_jtaguart.c serial: altera: constify uart_ops structures 2016-09-02 15:01:16 +02:00
altera_uart.c serial: altera: constify uart_ops structures 2016-09-02 15:01:16 +02:00
amba-pl010.c
amba-pl011.c tty: amba-pl011: uart_amba_port is not available with earlycon function 2016-09-22 11:45:08 +02:00
amba-pl011.h
apbuart.c
apbuart.h
ar933x_uart.c tree-wide: replace config_enabled() with IS_ENABLED() 2016-08-04 08:50:07 -04:00
arc_uart.c serial/arc: constify uart_ops structures 2016-09-01 21:05:41 +02:00
atmel_serial.c BUG: atmel_serial: Interrupts not disabled on close 2016-09-15 12:35:49 +02:00
bcm63xx_uart.c serial/bcm63xx_uart: constify uart_ops structures 2016-09-02 15:01:16 +02:00
bfin_sport_uart.c
bfin_sport_uart.h
bfin_uart.c
clps711x.c serial: clps711x: Changing the compatibility string to match with the smallest supported chip 2016-07-06 17:38:16 +02:00
crisv10.c
crisv10.h
digicolor-usart.c
dz.c
dz.h
earlycon-arm-semihost.c tty/serial: mark __init early_smh_setup() static 2016-09-02 15:03:35 +02:00
earlycon.c serial: earlycon: Extend earlycon command line option to support 64-bit addresses 2016-09-02 15:03:35 +02:00
efm32-uart.c
etraxfs-uart.c
fsl_lpuart.c tty: serial: fsl_lpuart: use GFP_ATOMIC under spin lock 2016-09-15 12:35:49 +02:00
icom.c
icom.h
ifx6x60.c
ifx6x60.h
imx.c serial: imx: Replace dmaengine old API 2016-09-15 12:35:49 +02:00
ioc3_serial.c
ioc4_serial.c
ip22zilog.c
ip22zilog.h
Kconfig serial: Make SERIAL_MPS2_UART depend on ARCH_MPS2 2016-06-25 10:40:33 -07:00
kgdb_nmi.c
kgdboc.c
lantiq.c
lpc32xx_hs.c
m32r_sio_reg.h
m32r_sio.c serial: m32r_sio: make it explicitly non-modular 2016-06-25 14:00:06 -07:00
Makefile TTY and Serial driver update for 4.7-rc1 2016-05-20 20:57:27 -07:00
max310x.c serial: max310x: Set IRQF_TRIGGER_FALLING flag when dev.of_node is not NULL 2016-09-15 12:35:49 +02:00
max3100.c tty: serial: constify uart_ops structures 2016-09-02 15:01:16 +02:00
mcf.c
men_z135_uart.c tty: serial: constify uart_ops structures 2016-09-02 15:01:16 +02:00
meson_uart.c
mpc52xx_uart.c
mps2-uart.c serial: mps2-uart: make driver explicitly non-modular 2016-06-25 14:01:57 -07:00
mpsc.c
msm_serial.c tty: serial: msm: fix definition of msm_stop_dma 2016-06-25 10:23:54 -07:00
mux.c
mvebu-uart.c serial: mvebu-uart: free the IRQ in ->shutdown() 2016-06-25 14:00:06 -07:00
mxs-auart.c serial: mxs-auart: Fix missing clk_disable_unprepare() on error in mxs_get_clks() 2016-09-22 11:45:08 +02:00
netx-serial.c
omap-serial.c
pch_uart.c tty: serial: constify uart_ops structures 2016-09-02 15:01:16 +02:00
pic32_uart.c serial: pic32_uart: Fix double free of 'sport->irq_fault_name'. 2016-06-25 13:50:53 -07:00
pic32_uart.h
pmac_zilog.c TTY: serial, handle platform_get_irq retval properly 2016-06-25 09:01:52 -07:00
pmac_zilog.h
pnx8xxx_uart.c
pxa.c serial: pxa: make it explicitly non-modular 2016-06-25 14:00:06 -07:00
rp2.c
sa1100.c
samsung.c serial: samsung: Register cpufreq notifier only on S3C24xx 2016-08-31 15:39:58 +02:00
samsung.h serial: samsung: Register cpufreq notifier only on S3C24xx 2016-08-31 15:39:58 +02:00
sb1250-duart.c
sc16is7xx.c sc16is7xx: make sure device is in suspend once probed 2016-08-31 16:05:26 +02:00
sccnxp.c
serial_core.c serial: core: fix potential NULL pointer dereference 2016-09-15 12:35:49 +02:00
serial_ks8695.c
serial_mctrl_gpio.c serial: mctrl_gpio: enable API usage only for initialized mctrl_gpios struct 2016-06-25 14:30:42 -07:00
serial_mctrl_gpio.h serial: mctrl_gpio: add modem control read routine 2016-06-25 14:30:42 -07:00
serial_txx9.c
serial-tegra.c TTY: serial, handle platform_get_irq retval properly 2016-06-25 09:01:52 -07:00
sh-sci.c tty: serial: constify uart_ops structures 2016-09-02 15:01:16 +02:00
sh-sci.h serial: sh-sci: Clear (H)SCIF timeout and overrun during reset 2016-06-25 09:09:53 -07:00
sirfsoc_uart.c
sirfsoc_uart.h serial: sirf: make fifo functions static 2016-06-25 14:01:57 -07:00
sn_console.c
sprd_serial.c remove lots of IS_ERR_VALUE abuses 2016-05-27 15:26:11 -07:00
st-asc.c serial: st-asc: constify uart_ops structures 2016-09-02 15:01:16 +02:00
stm32-usart.c serial: stm32: fix uart enable management 2016-09-22 11:48:56 +02:00
stm32-usart.h serial: stm32: adding dma support 2016-09-22 11:48:55 +02:00
suncore.c
sunhv.c sparc: serial: sunhv: fix a double lock bug 2016-07-27 22:54:52 -07:00
sunsab.c
sunsab.h
sunsu.c
sunzilog.c
sunzilog.h
tilegx.c
timbuart.c tty: serial: constify uart_ops structures 2016-09-02 15:01:16 +02:00
timbuart.h
uartlite.c serial-uartlite: constify uart_ops structures 2016-09-02 15:01:16 +02:00
ucc_uart.c
vr41xx_siu.c
vt8500_serial.c serial: vt8500_serial: Fix a parameter of find_first_zero_bit. 2016-08-31 15:42:28 +02:00
xilinx_uartps.c serial: xuartps: Do not enable parity error interrupt 2016-09-22 11:49:55 +02:00
zs.c
zs.h