forked from luck/tmp_suning_uos_patched
414 lines
8.2 KiB
C
414 lines
8.2 KiB
C
/*
|
|
* linux/arch/arm/mach-pxa/cm-x270.c
|
|
*
|
|
* Copyright (C) 2007, 2008 CompuLab, Ltd.
|
|
* Mike Rapoport <mike@compulab.co.il>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/platform_device.h>
|
|
#include <linux/sysdev.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/rtc-v3020.h>
|
|
#include <video/mbxfb.h>
|
|
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/libertas_spi.h>
|
|
|
|
#include <mach/pxa27x.h>
|
|
#include <mach/ohci.h>
|
|
#include <mach/mmc.h>
|
|
#include <mach/pxa2xx_spi.h>
|
|
|
|
#include "generic.h"
|
|
|
|
/* physical address if local-bus attached devices */
|
|
#define RTC_PHYS_BASE (PXA_CS1_PHYS + (5 << 22))
|
|
|
|
/* GPIO IRQ usage */
|
|
#define GPIO83_MMC_IRQ (83)
|
|
|
|
#define CMX270_MMC_IRQ IRQ_GPIO(GPIO83_MMC_IRQ)
|
|
|
|
/* MMC power enable */
|
|
#define GPIO105_MMC_POWER (105)
|
|
|
|
/* WLAN GPIOS */
|
|
#define GPIO19_WLAN_STRAP (19)
|
|
#define GPIO102_WLAN_RST (102)
|
|
|
|
static unsigned long cmx270_pin_config[] = {
|
|
/* AC'97 */
|
|
GPIO28_AC97_BITCLK,
|
|
GPIO29_AC97_SDATA_IN_0,
|
|
GPIO30_AC97_SDATA_OUT,
|
|
GPIO31_AC97_SYNC,
|
|
GPIO98_AC97_SYSCLK,
|
|
GPIO113_AC97_nRESET,
|
|
|
|
/* BTUART */
|
|
GPIO42_BTUART_RXD,
|
|
GPIO43_BTUART_TXD,
|
|
GPIO44_BTUART_CTS,
|
|
GPIO45_BTUART_RTS,
|
|
|
|
/* STUART */
|
|
GPIO46_STUART_RXD,
|
|
GPIO47_STUART_TXD,
|
|
|
|
/* MCI controller */
|
|
GPIO32_MMC_CLK,
|
|
GPIO112_MMC_CMD,
|
|
GPIO92_MMC_DAT_0,
|
|
GPIO109_MMC_DAT_1,
|
|
GPIO110_MMC_DAT_2,
|
|
GPIO111_MMC_DAT_3,
|
|
|
|
/* LCD */
|
|
GPIOxx_LCD_TFT_16BPP,
|
|
|
|
/* I2C */
|
|
GPIO117_I2C_SCL,
|
|
GPIO118_I2C_SDA,
|
|
|
|
/* SSP1 */
|
|
GPIO23_SSP1_SCLK,
|
|
GPIO24_SSP1_SFRM,
|
|
GPIO25_SSP1_TXD,
|
|
GPIO26_SSP1_RXD,
|
|
|
|
/* SSP2 */
|
|
GPIO19_GPIO, /* SSP2 clock is used as GPIO for Libertas pin-strap */
|
|
GPIO14_GPIO,
|
|
GPIO87_SSP2_TXD,
|
|
GPIO88_SSP2_RXD,
|
|
|
|
/* PC Card */
|
|
GPIO48_nPOE,
|
|
GPIO49_nPWE,
|
|
GPIO50_nPIOR,
|
|
GPIO51_nPIOW,
|
|
GPIO85_nPCE_1,
|
|
GPIO54_nPCE_2,
|
|
GPIO55_nPREG,
|
|
GPIO56_nPWAIT,
|
|
GPIO57_nIOIS16,
|
|
|
|
/* SDRAM and local bus */
|
|
GPIO15_nCS_1,
|
|
GPIO78_nCS_2,
|
|
GPIO79_nCS_3,
|
|
GPIO80_nCS_4,
|
|
GPIO33_nCS_5,
|
|
GPIO49_nPWE,
|
|
GPIO18_RDY,
|
|
|
|
/* GPIO */
|
|
GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,
|
|
GPIO105_GPIO | MFP_LPM_DRIVE_HIGH, /* MMC/SD power */
|
|
GPIO53_GPIO, /* PC card reset */
|
|
GPIO102_GPIO, /* WLAN reset */
|
|
|
|
/* NAND controls */
|
|
GPIO11_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */
|
|
GPIO89_GPIO, /* NAND Ready/Busy */
|
|
|
|
/* interrupts */
|
|
GPIO10_GPIO, /* DM9000 interrupt */
|
|
GPIO83_GPIO, /* MMC card detect */
|
|
GPIO95_GPIO, /* WLAN interrupt */
|
|
};
|
|
|
|
/* V3020 RTC */
|
|
#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
|
|
static struct resource cmx270_v3020_resource[] = {
|
|
[0] = {
|
|
.start = RTC_PHYS_BASE,
|
|
.end = RTC_PHYS_BASE + 4,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
struct v3020_platform_data cmx270_v3020_pdata = {
|
|
.leftshift = 16,
|
|
};
|
|
|
|
static struct platform_device cmx270_rtc_device = {
|
|
.name = "v3020",
|
|
.num_resources = ARRAY_SIZE(cmx270_v3020_resource),
|
|
.resource = cmx270_v3020_resource,
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &cmx270_v3020_pdata,
|
|
}
|
|
};
|
|
|
|
static void __init cmx270_init_rtc(void)
|
|
{
|
|
platform_device_register(&cmx270_rtc_device);
|
|
}
|
|
#else
|
|
static inline void cmx270_init_rtc(void) {}
|
|
#endif
|
|
|
|
/* 2700G graphics */
|
|
#if defined(CONFIG_FB_MBX) || defined(CONFIG_FB_MBX_MODULE)
|
|
static u64 fb_dma_mask = ~(u64)0;
|
|
|
|
static struct resource cmx270_2700G_resource[] = {
|
|
/* frame buffer memory including ODFB and External SDRAM */
|
|
[0] = {
|
|
.start = PXA_CS2_PHYS,
|
|
.end = PXA_CS2_PHYS + 0x01ffffff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
/* Marathon registers */
|
|
[1] = {
|
|
.start = PXA_CS2_PHYS + 0x03fe0000,
|
|
.end = PXA_CS2_PHYS + 0x03ffffff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static unsigned long cmx270_marathon_on[] = {
|
|
GPIO58_GPIO,
|
|
GPIO59_GPIO,
|
|
GPIO60_GPIO,
|
|
GPIO61_GPIO,
|
|
GPIO62_GPIO,
|
|
GPIO63_GPIO,
|
|
GPIO64_GPIO,
|
|
GPIO65_GPIO,
|
|
GPIO66_GPIO,
|
|
GPIO67_GPIO,
|
|
GPIO68_GPIO,
|
|
GPIO69_GPIO,
|
|
GPIO70_GPIO,
|
|
GPIO71_GPIO,
|
|
GPIO72_GPIO,
|
|
GPIO73_GPIO,
|
|
GPIO74_GPIO,
|
|
GPIO75_GPIO,
|
|
GPIO76_GPIO,
|
|
GPIO77_GPIO,
|
|
};
|
|
|
|
static unsigned long cmx270_marathon_off[] = {
|
|
GPIOxx_LCD_TFT_16BPP,
|
|
};
|
|
|
|
static int cmx270_marathon_probe(struct fb_info *fb)
|
|
{
|
|
int gpio, err;
|
|
|
|
for (gpio = 58; gpio <= 77; gpio++) {
|
|
err = gpio_request(gpio, "LCD");
|
|
if (err)
|
|
return err;
|
|
gpio_direction_input(gpio);
|
|
}
|
|
|
|
pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_marathon_on));
|
|
return 0;
|
|
}
|
|
|
|
static int cmx270_marathon_remove(struct fb_info *fb)
|
|
{
|
|
int gpio;
|
|
|
|
pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_marathon_off));
|
|
|
|
for (gpio = 58; gpio <= 77; gpio++)
|
|
gpio_free(gpio);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct mbxfb_platform_data cmx270_2700G_data = {
|
|
.xres = {
|
|
.min = 240,
|
|
.max = 1200,
|
|
.defval = 640,
|
|
},
|
|
.yres = {
|
|
.min = 240,
|
|
.max = 1200,
|
|
.defval = 480,
|
|
},
|
|
.bpp = {
|
|
.min = 16,
|
|
.max = 32,
|
|
.defval = 16,
|
|
},
|
|
.memsize = 8*1024*1024,
|
|
.probe = cmx270_marathon_probe,
|
|
.remove = cmx270_marathon_remove,
|
|
};
|
|
|
|
static struct platform_device cmx270_2700G = {
|
|
.name = "mbx-fb",
|
|
.dev = {
|
|
.platform_data = &cmx270_2700G_data,
|
|
.dma_mask = &fb_dma_mask,
|
|
.coherent_dma_mask = 0xffffffff,
|
|
},
|
|
.num_resources = ARRAY_SIZE(cmx270_2700G_resource),
|
|
.resource = cmx270_2700G_resource,
|
|
.id = -1,
|
|
};
|
|
|
|
static void __init cmx270_init_2700G(void)
|
|
{
|
|
platform_device_register(&cmx270_2700G);
|
|
}
|
|
#else
|
|
static inline void cmx270_init_2700G(void) {}
|
|
#endif
|
|
|
|
/* PXA27x OHCI controller setup */
|
|
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
|
|
static struct pxaohci_platform_data cmx270_ohci_platform_data = {
|
|
.port_mode = PMM_PERPORT_MODE,
|
|
.flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
|
|
};
|
|
|
|
static void __init cmx270_init_ohci(void)
|
|
{
|
|
pxa_set_ohci_info(&cmx270_ohci_platform_data);
|
|
}
|
|
#else
|
|
static inline void cmx270_init_ohci(void) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
|
|
static struct pxamci_platform_data cmx270_mci_platform_data = {
|
|
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
|
|
.gpio_card_detect = GPIO83_MMC_IRQ,
|
|
.gpio_card_ro = -1,
|
|
.gpio_power = GPIO105_MMC_POWER,
|
|
.gpio_power_invert = 1,
|
|
};
|
|
|
|
static void __init cmx270_init_mmc(void)
|
|
{
|
|
pxa_set_mci_info(&cmx270_mci_platform_data);
|
|
}
|
|
#else
|
|
static inline void cmx270_init_mmc(void) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
|
|
static struct pxa2xx_spi_master cm_x270_spi_info = {
|
|
.num_chipselect = 1,
|
|
.enable_dma = 1,
|
|
};
|
|
|
|
static struct pxa2xx_spi_chip cm_x270_libertas_chip = {
|
|
.rx_threshold = 1,
|
|
.tx_threshold = 1,
|
|
.timeout = 1000,
|
|
.gpio_cs = 14,
|
|
};
|
|
|
|
static unsigned long cm_x270_libertas_pin_config[] = {
|
|
/* SSP2 */
|
|
GPIO19_SSP2_SCLK,
|
|
GPIO14_GPIO,
|
|
GPIO87_SSP2_TXD,
|
|
GPIO88_SSP2_RXD,
|
|
|
|
};
|
|
|
|
static int cm_x270_libertas_setup(struct spi_device *spi)
|
|
{
|
|
int err = gpio_request(GPIO19_WLAN_STRAP, "WLAN STRAP");
|
|
if (err)
|
|
return err;
|
|
|
|
err = gpio_request(GPIO102_WLAN_RST, "WLAN RST");
|
|
if (err)
|
|
goto err_free_strap;
|
|
|
|
err = gpio_direction_output(GPIO102_WLAN_RST, 0);
|
|
if (err)
|
|
goto err_free_strap;
|
|
msleep(100);
|
|
|
|
err = gpio_direction_output(GPIO19_WLAN_STRAP, 1);
|
|
if (err)
|
|
goto err_free_strap;
|
|
msleep(100);
|
|
|
|
pxa2xx_mfp_config(ARRAY_AND_SIZE(cm_x270_libertas_pin_config));
|
|
|
|
gpio_set_value(GPIO102_WLAN_RST, 1);
|
|
msleep(100);
|
|
|
|
spi->bits_per_word = 16;
|
|
spi_setup(spi);
|
|
|
|
return 0;
|
|
|
|
err_free_strap:
|
|
gpio_free(GPIO19_WLAN_STRAP);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int cm_x270_libertas_teardown(struct spi_device *spi)
|
|
{
|
|
gpio_set_value(GPIO102_WLAN_RST, 0);
|
|
gpio_free(GPIO102_WLAN_RST);
|
|
gpio_free(GPIO19_WLAN_STRAP);
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct libertas_spi_platform_data cm_x270_libertas_pdata = {
|
|
.use_dummy_writes = 1,
|
|
.setup = cm_x270_libertas_setup,
|
|
.teardown = cm_x270_libertas_teardown,
|
|
};
|
|
|
|
static struct spi_board_info cm_x270_spi_devices[] __initdata = {
|
|
{
|
|
.modalias = "libertas_spi",
|
|
.max_speed_hz = 13000000,
|
|
.bus_num = 2,
|
|
.irq = gpio_to_irq(95),
|
|
.chip_select = 0,
|
|
.controller_data = &cm_x270_libertas_chip,
|
|
.platform_data = &cm_x270_libertas_pdata,
|
|
},
|
|
};
|
|
|
|
static void __init cmx270_init_spi(void)
|
|
{
|
|
pxa2xx_set_spi_info(2, &cm_x270_spi_info);
|
|
spi_register_board_info(ARRAY_AND_SIZE(cm_x270_spi_devices));
|
|
}
|
|
#else
|
|
static inline void cmx270_init_spi(void) {}
|
|
#endif
|
|
|
|
void __init cmx270_init(void)
|
|
{
|
|
pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));
|
|
|
|
#ifdef CONFIG_PM
|
|
pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
|
|
#endif
|
|
|
|
cmx270_init_rtc();
|
|
cmx270_init_mmc();
|
|
cmx270_init_ohci();
|
|
cmx270_init_2700G();
|
|
cmx270_init_spi();
|
|
}
|