forked from luck/tmp_suning_uos_patched
067fda1c06
The main intent here is to get rid of the iio_buffer_set_attrs() helper, or at least rework it's usage a bit. The problem with that helper is that it needs a pointer to the buffer, which makes supporting multiple buffers per IIO device a bit more cumbersome. The hid_sensor_setup_trigger() is pretty much used in the same way: - iio_triggered_buffer_setup() gets called before - then hid_sensor_setup_trigger() and hid_sensor_setup_batch_mode() gets called which may attach some fifo attributes This change merges the 2 together under the hid_sensor_setup_trigger() function. Only the &iio_pollfunc_store_time is passed to all devices, so it's not even required to pass it explicitly outside of the common hid_sensor_setup_trigger() function. Moving the devm_iio_triggered_buffer_setup/cleanup() calls into the common place code can help the rework of the buffer code, since it is in one place. One detail of the change is that there are 2 drivers that use devm_iio_triggered_buffer_setup(). That function gets implicitly replaced with iio_triggered_buffer_setup()/cleanup(), but since all drivers call both hid_sensor_setup_trigger9) & hid_sensor_remove_trigger() trigger, the iio_triggered_buffer_cleanup() piggy backs on the hid_sensor_remove_trigger() call, which should cover the cleanup. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
368 lines
9.6 KiB
C
368 lines
9.6 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* HID Sensors Driver
|
|
* Copyright (c) 2014, Intel Corporation.
|
|
*/
|
|
|
|
#include <linux/device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/module.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/hid-sensor-hub.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/iio/buffer.h>
|
|
#include "../common/hid-sensors/hid-sensor-trigger.h"
|
|
|
|
struct dev_rot_state {
|
|
struct hid_sensor_hub_callbacks callbacks;
|
|
struct hid_sensor_common common_attributes;
|
|
struct hid_sensor_hub_attribute_info quaternion;
|
|
u32 sampled_vals[4];
|
|
int scale_pre_decml;
|
|
int scale_post_decml;
|
|
int scale_precision;
|
|
int value_offset;
|
|
};
|
|
|
|
/* Channel definitions */
|
|
static const struct iio_chan_spec dev_rot_channels[] = {
|
|
{
|
|
.type = IIO_ROT,
|
|
.modified = 1,
|
|
.channel2 = IIO_MOD_QUATERNION,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) |
|
|
BIT(IIO_CHAN_INFO_OFFSET) |
|
|
BIT(IIO_CHAN_INFO_SCALE) |
|
|
BIT(IIO_CHAN_INFO_HYSTERESIS)
|
|
}
|
|
};
|
|
|
|
/* Adjust channel real bits based on report descriptor */
|
|
static void dev_rot_adjust_channel_bit_mask(struct iio_chan_spec *chan,
|
|
int size)
|
|
{
|
|
chan->scan_type.sign = 's';
|
|
/* Real storage bits will change based on the report desc. */
|
|
chan->scan_type.realbits = size * 8;
|
|
/* Maximum size of a sample to capture is u32 */
|
|
chan->scan_type.storagebits = sizeof(u32) * 8;
|
|
chan->scan_type.repeat = 4;
|
|
}
|
|
|
|
/* Channel read_raw handler */
|
|
static int dev_rot_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int size, int *vals, int *val_len,
|
|
long mask)
|
|
{
|
|
struct dev_rot_state *rot_state = iio_priv(indio_dev);
|
|
int ret_type;
|
|
int i;
|
|
|
|
vals[0] = 0;
|
|
vals[1] = 0;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
if (size >= 4) {
|
|
for (i = 0; i < 4; ++i)
|
|
vals[i] = rot_state->sampled_vals[i];
|
|
ret_type = IIO_VAL_INT_MULTIPLE;
|
|
*val_len = 4;
|
|
} else
|
|
ret_type = -EINVAL;
|
|
break;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
vals[0] = rot_state->scale_pre_decml;
|
|
vals[1] = rot_state->scale_post_decml;
|
|
return rot_state->scale_precision;
|
|
|
|
case IIO_CHAN_INFO_OFFSET:
|
|
*vals = rot_state->value_offset;
|
|
return IIO_VAL_INT;
|
|
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
ret_type = hid_sensor_read_samp_freq_value(
|
|
&rot_state->common_attributes, &vals[0], &vals[1]);
|
|
break;
|
|
case IIO_CHAN_INFO_HYSTERESIS:
|
|
ret_type = hid_sensor_read_raw_hyst_value(
|
|
&rot_state->common_attributes, &vals[0], &vals[1]);
|
|
break;
|
|
default:
|
|
ret_type = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
return ret_type;
|
|
}
|
|
|
|
/* Channel write_raw handler */
|
|
static int dev_rot_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int val,
|
|
int val2,
|
|
long mask)
|
|
{
|
|
struct dev_rot_state *rot_state = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
ret = hid_sensor_write_samp_freq_value(
|
|
&rot_state->common_attributes, val, val2);
|
|
break;
|
|
case IIO_CHAN_INFO_HYSTERESIS:
|
|
ret = hid_sensor_write_raw_hyst_value(
|
|
&rot_state->common_attributes, val, val2);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct iio_info dev_rot_info = {
|
|
.read_raw_multi = &dev_rot_read_raw,
|
|
.write_raw = &dev_rot_write_raw,
|
|
};
|
|
|
|
/* Function to push data to buffer */
|
|
static void hid_sensor_push_data(struct iio_dev *indio_dev, u8 *data, int len)
|
|
{
|
|
dev_dbg(&indio_dev->dev, "hid_sensor_push_data >>\n");
|
|
iio_push_to_buffers(indio_dev, (u8 *)data);
|
|
dev_dbg(&indio_dev->dev, "hid_sensor_push_data <<\n");
|
|
|
|
}
|
|
|
|
/* Callback handler to send event after all samples are received and captured */
|
|
static int dev_rot_proc_event(struct hid_sensor_hub_device *hsdev,
|
|
unsigned usage_id,
|
|
void *priv)
|
|
{
|
|
struct iio_dev *indio_dev = platform_get_drvdata(priv);
|
|
struct dev_rot_state *rot_state = iio_priv(indio_dev);
|
|
|
|
dev_dbg(&indio_dev->dev, "dev_rot_proc_event\n");
|
|
if (atomic_read(&rot_state->common_attributes.data_ready))
|
|
hid_sensor_push_data(indio_dev,
|
|
(u8 *)rot_state->sampled_vals,
|
|
sizeof(rot_state->sampled_vals));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Capture samples in local storage */
|
|
static int dev_rot_capture_sample(struct hid_sensor_hub_device *hsdev,
|
|
unsigned usage_id,
|
|
size_t raw_len, char *raw_data,
|
|
void *priv)
|
|
{
|
|
struct iio_dev *indio_dev = platform_get_drvdata(priv);
|
|
struct dev_rot_state *rot_state = iio_priv(indio_dev);
|
|
|
|
if (usage_id == HID_USAGE_SENSOR_ORIENT_QUATERNION) {
|
|
memcpy(rot_state->sampled_vals, raw_data,
|
|
sizeof(rot_state->sampled_vals));
|
|
dev_dbg(&indio_dev->dev, "Recd Quat len:%zu::%zu\n", raw_len,
|
|
sizeof(rot_state->sampled_vals));
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Parse report which is specific to an usage id*/
|
|
static int dev_rot_parse_report(struct platform_device *pdev,
|
|
struct hid_sensor_hub_device *hsdev,
|
|
struct iio_chan_spec *channels,
|
|
unsigned usage_id,
|
|
struct dev_rot_state *st)
|
|
{
|
|
int ret;
|
|
|
|
ret = sensor_hub_input_get_attribute_info(hsdev,
|
|
HID_INPUT_REPORT,
|
|
usage_id,
|
|
HID_USAGE_SENSOR_ORIENT_QUATERNION,
|
|
&st->quaternion);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dev_rot_adjust_channel_bit_mask(&channels[0],
|
|
st->quaternion.size / 4);
|
|
|
|
dev_dbg(&pdev->dev, "dev_rot %x:%x\n", st->quaternion.index,
|
|
st->quaternion.report_id);
|
|
|
|
dev_dbg(&pdev->dev, "dev_rot: attrib size %d\n",
|
|
st->quaternion.size);
|
|
|
|
st->scale_precision = hid_sensor_format_scale(
|
|
hsdev->usage,
|
|
&st->quaternion,
|
|
&st->scale_pre_decml, &st->scale_post_decml);
|
|
|
|
/* Set Sensitivity field ids, when there is no individual modifier */
|
|
if (st->common_attributes.sensitivity.index < 0) {
|
|
sensor_hub_input_get_attribute_info(hsdev,
|
|
HID_FEATURE_REPORT, usage_id,
|
|
HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS |
|
|
HID_USAGE_SENSOR_DATA_ORIENTATION,
|
|
&st->common_attributes.sensitivity);
|
|
dev_dbg(&pdev->dev, "Sensitivity index:report %d:%d\n",
|
|
st->common_attributes.sensitivity.index,
|
|
st->common_attributes.sensitivity.report_id);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Function to initialize the processing for usage id */
|
|
static int hid_dev_rot_probe(struct platform_device *pdev)
|
|
{
|
|
int ret;
|
|
char *name;
|
|
struct iio_dev *indio_dev;
|
|
struct dev_rot_state *rot_state;
|
|
struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
|
|
|
|
indio_dev = devm_iio_device_alloc(&pdev->dev,
|
|
sizeof(struct dev_rot_state));
|
|
if (indio_dev == NULL)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, indio_dev);
|
|
|
|
rot_state = iio_priv(indio_dev);
|
|
rot_state->common_attributes.hsdev = hsdev;
|
|
rot_state->common_attributes.pdev = pdev;
|
|
|
|
switch (hsdev->usage) {
|
|
case HID_USAGE_SENSOR_DEVICE_ORIENTATION:
|
|
name = "dev_rotation";
|
|
break;
|
|
case HID_USAGE_SENSOR_RELATIVE_ORIENTATION:
|
|
name = "relative_orientation";
|
|
break;
|
|
case HID_USAGE_SENSOR_GEOMAGNETIC_ORIENTATION:
|
|
name = "geomagnetic_orientation";
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = hid_sensor_parse_common_attributes(hsdev, hsdev->usage,
|
|
&rot_state->common_attributes);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to setup common attributes\n");
|
|
return ret;
|
|
}
|
|
|
|
indio_dev->channels = devm_kmemdup(&pdev->dev, dev_rot_channels,
|
|
sizeof(dev_rot_channels),
|
|
GFP_KERNEL);
|
|
if (!indio_dev->channels) {
|
|
dev_err(&pdev->dev, "failed to duplicate channels\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
ret = dev_rot_parse_report(pdev, hsdev,
|
|
(struct iio_chan_spec *)indio_dev->channels,
|
|
hsdev->usage, rot_state);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to setup attributes\n");
|
|
return ret;
|
|
}
|
|
|
|
indio_dev->num_channels = ARRAY_SIZE(dev_rot_channels);
|
|
indio_dev->dev.parent = &pdev->dev;
|
|
indio_dev->info = &dev_rot_info;
|
|
indio_dev->name = name;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
|
|
atomic_set(&rot_state->common_attributes.data_ready, 0);
|
|
|
|
ret = hid_sensor_setup_trigger(indio_dev, name,
|
|
&rot_state->common_attributes);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "trigger setup failed\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "device register failed\n");
|
|
goto error_remove_trigger;
|
|
}
|
|
|
|
rot_state->callbacks.send_event = dev_rot_proc_event;
|
|
rot_state->callbacks.capture_sample = dev_rot_capture_sample;
|
|
rot_state->callbacks.pdev = pdev;
|
|
ret = sensor_hub_register_callback(hsdev, hsdev->usage,
|
|
&rot_state->callbacks);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "callback reg failed\n");
|
|
goto error_iio_unreg;
|
|
}
|
|
|
|
return 0;
|
|
|
|
error_iio_unreg:
|
|
iio_device_unregister(indio_dev);
|
|
error_remove_trigger:
|
|
hid_sensor_remove_trigger(indio_dev, &rot_state->common_attributes);
|
|
return ret;
|
|
}
|
|
|
|
/* Function to deinitialize the processing for usage id */
|
|
static int hid_dev_rot_remove(struct platform_device *pdev)
|
|
{
|
|
struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
|
|
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
|
|
struct dev_rot_state *rot_state = iio_priv(indio_dev);
|
|
|
|
sensor_hub_remove_callback(hsdev, hsdev->usage);
|
|
iio_device_unregister(indio_dev);
|
|
hid_sensor_remove_trigger(indio_dev, &rot_state->common_attributes);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct platform_device_id hid_dev_rot_ids[] = {
|
|
{
|
|
/* Format: HID-SENSOR-usage_id_in_hex_lowercase */
|
|
.name = "HID-SENSOR-20008a",
|
|
},
|
|
{
|
|
/* Relative orientation(AG) sensor */
|
|
.name = "HID-SENSOR-20008e",
|
|
},
|
|
{
|
|
/* Geomagnetic orientation(AM) sensor */
|
|
.name = "HID-SENSOR-2000c1",
|
|
},
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, hid_dev_rot_ids);
|
|
|
|
static struct platform_driver hid_dev_rot_platform_driver = {
|
|
.id_table = hid_dev_rot_ids,
|
|
.driver = {
|
|
.name = KBUILD_MODNAME,
|
|
.pm = &hid_sensor_pm_ops,
|
|
},
|
|
.probe = hid_dev_rot_probe,
|
|
.remove = hid_dev_rot_remove,
|
|
};
|
|
module_platform_driver(hid_dev_rot_platform_driver);
|
|
|
|
MODULE_DESCRIPTION("HID Sensor Device Rotation");
|
|
MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
|
|
MODULE_LICENSE("GPL");
|