kernel_optimize_test/block/bounce.c
Christoph Hellwig 2b070cfe58 block: remove the i argument to bio_for_each_segment_all
We only have two callers that need the integer loop iterator, and they
can easily maintain it themselves.

Suggested-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: David Sterba <dsterba@suse.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Acked-by: Coly Li <colyli@suse.de>
Reviewed-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-30 09:26:13 -06:00

389 lines
9.3 KiB
C

// SPDX-License-Identifier: GPL-2.0
/* bounce buffer handling for block devices
*
* - Split from highmem.c
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/mm.h>
#include <linux/export.h>
#include <linux/swap.h>
#include <linux/gfp.h>
#include <linux/bio.h>
#include <linux/pagemap.h>
#include <linux/mempool.h>
#include <linux/blkdev.h>
#include <linux/backing-dev.h>
#include <linux/init.h>
#include <linux/hash.h>
#include <linux/highmem.h>
#include <linux/memblock.h>
#include <linux/printk.h>
#include <asm/tlbflush.h>
#include <trace/events/block.h>
#include "blk.h"
#define POOL_SIZE 64
#define ISA_POOL_SIZE 16
static struct bio_set bounce_bio_set, bounce_bio_split;
static mempool_t page_pool, isa_page_pool;
static void init_bounce_bioset(void)
{
static bool bounce_bs_setup;
int ret;
if (bounce_bs_setup)
return;
ret = bioset_init(&bounce_bio_set, BIO_POOL_SIZE, 0, BIOSET_NEED_BVECS);
BUG_ON(ret);
if (bioset_integrity_create(&bounce_bio_set, BIO_POOL_SIZE))
BUG_ON(1);
ret = bioset_init(&bounce_bio_split, BIO_POOL_SIZE, 0, 0);
BUG_ON(ret);
bounce_bs_setup = true;
}
#if defined(CONFIG_HIGHMEM)
static __init int init_emergency_pool(void)
{
int ret;
#if defined(CONFIG_HIGHMEM) && !defined(CONFIG_MEMORY_HOTPLUG)
if (max_pfn <= max_low_pfn)
return 0;
#endif
ret = mempool_init_page_pool(&page_pool, POOL_SIZE, 0);
BUG_ON(ret);
pr_info("pool size: %d pages\n", POOL_SIZE);
init_bounce_bioset();
return 0;
}
__initcall(init_emergency_pool);
#endif
#ifdef CONFIG_HIGHMEM
/*
* highmem version, map in to vec
*/
static void bounce_copy_vec(struct bio_vec *to, unsigned char *vfrom)
{
unsigned char *vto;
vto = kmap_atomic(to->bv_page);
memcpy(vto + to->bv_offset, vfrom, to->bv_len);
kunmap_atomic(vto);
}
#else /* CONFIG_HIGHMEM */
#define bounce_copy_vec(to, vfrom) \
memcpy(page_address((to)->bv_page) + (to)->bv_offset, vfrom, (to)->bv_len)
#endif /* CONFIG_HIGHMEM */
/*
* allocate pages in the DMA region for the ISA pool
*/
static void *mempool_alloc_pages_isa(gfp_t gfp_mask, void *data)
{
return mempool_alloc_pages(gfp_mask | GFP_DMA, data);
}
static DEFINE_MUTEX(isa_mutex);
/*
* gets called "every" time someone init's a queue with BLK_BOUNCE_ISA
* as the max address, so check if the pool has already been created.
*/
int init_emergency_isa_pool(void)
{
int ret;
mutex_lock(&isa_mutex);
if (mempool_initialized(&isa_page_pool)) {
mutex_unlock(&isa_mutex);
return 0;
}
ret = mempool_init(&isa_page_pool, ISA_POOL_SIZE, mempool_alloc_pages_isa,
mempool_free_pages, (void *) 0);
BUG_ON(ret);
pr_info("isa pool size: %d pages\n", ISA_POOL_SIZE);
init_bounce_bioset();
mutex_unlock(&isa_mutex);
return 0;
}
/*
* Simple bounce buffer support for highmem pages. Depending on the
* queue gfp mask set, *to may or may not be a highmem page. kmap it
* always, it will do the Right Thing
*/
static void copy_to_high_bio_irq(struct bio *to, struct bio *from)
{
unsigned char *vfrom;
struct bio_vec tovec, fromvec;
struct bvec_iter iter;
/*
* The bio of @from is created by bounce, so we can iterate
* its bvec from start to end, but the @from->bi_iter can't be
* trusted because it might be changed by splitting.
*/
struct bvec_iter from_iter = BVEC_ITER_ALL_INIT;
bio_for_each_segment(tovec, to, iter) {
fromvec = bio_iter_iovec(from, from_iter);
if (tovec.bv_page != fromvec.bv_page) {
/*
* fromvec->bv_offset and fromvec->bv_len might have
* been modified by the block layer, so use the original
* copy, bounce_copy_vec already uses tovec->bv_len
*/
vfrom = page_address(fromvec.bv_page) +
tovec.bv_offset;
bounce_copy_vec(&tovec, vfrom);
flush_dcache_page(tovec.bv_page);
}
bio_advance_iter(from, &from_iter, tovec.bv_len);
}
}
static void bounce_end_io(struct bio *bio, mempool_t *pool)
{
struct bio *bio_orig = bio->bi_private;
struct bio_vec *bvec, orig_vec;
struct bvec_iter orig_iter = bio_orig->bi_iter;
struct bvec_iter_all iter_all;
/*
* free up bounce indirect pages used
*/
bio_for_each_segment_all(bvec, bio, iter_all) {
orig_vec = bio_iter_iovec(bio_orig, orig_iter);
if (bvec->bv_page != orig_vec.bv_page) {
dec_zone_page_state(bvec->bv_page, NR_BOUNCE);
mempool_free(bvec->bv_page, pool);
}
bio_advance_iter(bio_orig, &orig_iter, orig_vec.bv_len);
}
bio_orig->bi_status = bio->bi_status;
bio_endio(bio_orig);
bio_put(bio);
}
static void bounce_end_io_write(struct bio *bio)
{
bounce_end_io(bio, &page_pool);
}
static void bounce_end_io_write_isa(struct bio *bio)
{
bounce_end_io(bio, &isa_page_pool);
}
static void __bounce_end_io_read(struct bio *bio, mempool_t *pool)
{
struct bio *bio_orig = bio->bi_private;
if (!bio->bi_status)
copy_to_high_bio_irq(bio_orig, bio);
bounce_end_io(bio, pool);
}
static void bounce_end_io_read(struct bio *bio)
{
__bounce_end_io_read(bio, &page_pool);
}
static void bounce_end_io_read_isa(struct bio *bio)
{
__bounce_end_io_read(bio, &isa_page_pool);
}
static struct bio *bounce_clone_bio(struct bio *bio_src, gfp_t gfp_mask,
struct bio_set *bs)
{
struct bvec_iter iter;
struct bio_vec bv;
struct bio *bio;
/*
* Pre immutable biovecs, __bio_clone() used to just do a memcpy from
* bio_src->bi_io_vec to bio->bi_io_vec.
*
* We can't do that anymore, because:
*
* - The point of cloning the biovec is to produce a bio with a biovec
* the caller can modify: bi_idx and bi_bvec_done should be 0.
*
* - The original bio could've had more than BIO_MAX_PAGES biovecs; if
* we tried to clone the whole thing bio_alloc_bioset() would fail.
* But the clone should succeed as long as the number of biovecs we
* actually need to allocate is fewer than BIO_MAX_PAGES.
*
* - Lastly, bi_vcnt should not be looked at or relied upon by code
* that does not own the bio - reason being drivers don't use it for
* iterating over the biovec anymore, so expecting it to be kept up
* to date (i.e. for clones that share the parent biovec) is just
* asking for trouble and would force extra work on
* __bio_clone_fast() anyways.
*/
bio = bio_alloc_bioset(gfp_mask, bio_segments(bio_src), bs);
if (!bio)
return NULL;
bio->bi_disk = bio_src->bi_disk;
bio->bi_opf = bio_src->bi_opf;
bio->bi_ioprio = bio_src->bi_ioprio;
bio->bi_write_hint = bio_src->bi_write_hint;
bio->bi_iter.bi_sector = bio_src->bi_iter.bi_sector;
bio->bi_iter.bi_size = bio_src->bi_iter.bi_size;
switch (bio_op(bio)) {
case REQ_OP_DISCARD:
case REQ_OP_SECURE_ERASE:
case REQ_OP_WRITE_ZEROES:
break;
case REQ_OP_WRITE_SAME:
bio->bi_io_vec[bio->bi_vcnt++] = bio_src->bi_io_vec[0];
break;
default:
bio_for_each_segment(bv, bio_src, iter)
bio->bi_io_vec[bio->bi_vcnt++] = bv;
break;
}
if (bio_integrity(bio_src)) {
int ret;
ret = bio_integrity_clone(bio, bio_src, gfp_mask);
if (ret < 0) {
bio_put(bio);
return NULL;
}
}
bio_clone_blkg_association(bio, bio_src);
blkcg_bio_issue_init(bio);
return bio;
}
static void __blk_queue_bounce(struct request_queue *q, struct bio **bio_orig,
mempool_t *pool)
{
struct bio *bio;
int rw = bio_data_dir(*bio_orig);
struct bio_vec *to, from;
struct bvec_iter iter;
unsigned i = 0;
bool bounce = false;
int sectors = 0;
bool passthrough = bio_is_passthrough(*bio_orig);
bio_for_each_segment(from, *bio_orig, iter) {
if (i++ < BIO_MAX_PAGES)
sectors += from.bv_len >> 9;
if (page_to_pfn(from.bv_page) > q->limits.bounce_pfn)
bounce = true;
}
if (!bounce)
return;
if (!passthrough && sectors < bio_sectors(*bio_orig)) {
bio = bio_split(*bio_orig, sectors, GFP_NOIO, &bounce_bio_split);
bio_chain(bio, *bio_orig);
generic_make_request(*bio_orig);
*bio_orig = bio;
}
bio = bounce_clone_bio(*bio_orig, GFP_NOIO, passthrough ? NULL :
&bounce_bio_set);
/*
* Bvec table can't be updated by bio_for_each_segment_all(),
* so retrieve bvec from the table directly. This way is safe
* because the 'bio' is single-page bvec.
*/
for (i = 0, to = bio->bi_io_vec; i < bio->bi_vcnt; to++, i++) {
struct page *page = to->bv_page;
if (page_to_pfn(page) <= q->limits.bounce_pfn)
continue;
to->bv_page = mempool_alloc(pool, q->bounce_gfp);
inc_zone_page_state(to->bv_page, NR_BOUNCE);
if (rw == WRITE) {
char *vto, *vfrom;
flush_dcache_page(page);
vto = page_address(to->bv_page) + to->bv_offset;
vfrom = kmap_atomic(page) + to->bv_offset;
memcpy(vto, vfrom, to->bv_len);
kunmap_atomic(vfrom);
}
}
trace_block_bio_bounce(q, *bio_orig);
bio->bi_flags |= (1 << BIO_BOUNCED);
if (pool == &page_pool) {
bio->bi_end_io = bounce_end_io_write;
if (rw == READ)
bio->bi_end_io = bounce_end_io_read;
} else {
bio->bi_end_io = bounce_end_io_write_isa;
if (rw == READ)
bio->bi_end_io = bounce_end_io_read_isa;
}
bio->bi_private = *bio_orig;
*bio_orig = bio;
}
void blk_queue_bounce(struct request_queue *q, struct bio **bio_orig)
{
mempool_t *pool;
/*
* Data-less bio, nothing to bounce
*/
if (!bio_has_data(*bio_orig))
return;
/*
* for non-isa bounce case, just check if the bounce pfn is equal
* to or bigger than the highest pfn in the system -- in that case,
* don't waste time iterating over bio segments
*/
if (!(q->bounce_gfp & GFP_DMA)) {
if (q->limits.bounce_pfn >= blk_max_pfn)
return;
pool = &page_pool;
} else {
BUG_ON(!mempool_initialized(&isa_page_pool));
pool = &isa_page_pool;
}
/*
* slow path
*/
__blk_queue_bounce(q, bio_orig, pool);
}