forked from luck/tmp_suning_uos_patched
23efcb738e
Use pr_fmt, pr_<level> and netdev_<level> as appropriate. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
399 lines
7.9 KiB
C
399 lines
7.9 KiB
C
/*
|
|
* Sealevel Systems 4021 driver.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*
|
|
* (c) Copyright 1999, 2001 Alan Cox
|
|
* (c) Copyright 2001 Red Hat Inc.
|
|
* Generic HDLC port Copyright (C) 2008 Krzysztof Halasa <khc@pm.waw.pl>
|
|
*
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/net.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/if_arp.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/hdlc.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <net/arp.h>
|
|
|
|
#include <asm/irq.h>
|
|
#include <asm/io.h>
|
|
#include <asm/dma.h>
|
|
#include <asm/byteorder.h>
|
|
#include "z85230.h"
|
|
|
|
|
|
struct slvl_device
|
|
{
|
|
struct z8530_channel *chan;
|
|
int channel;
|
|
};
|
|
|
|
|
|
struct slvl_board
|
|
{
|
|
struct slvl_device dev[2];
|
|
struct z8530_dev board;
|
|
int iobase;
|
|
};
|
|
|
|
/*
|
|
* Network driver support routines
|
|
*/
|
|
|
|
static inline struct slvl_device* dev_to_chan(struct net_device *dev)
|
|
{
|
|
return (struct slvl_device *)dev_to_hdlc(dev)->priv;
|
|
}
|
|
|
|
/*
|
|
* Frame receive. Simple for our card as we do HDLC and there
|
|
* is no funny garbage involved
|
|
*/
|
|
|
|
static void sealevel_input(struct z8530_channel *c, struct sk_buff *skb)
|
|
{
|
|
/* Drop the CRC - it's not a good idea to try and negotiate it ;) */
|
|
skb_trim(skb, skb->len - 2);
|
|
skb->protocol = hdlc_type_trans(skb, c->netdevice);
|
|
skb_reset_mac_header(skb);
|
|
skb->dev = c->netdevice;
|
|
netif_rx(skb);
|
|
}
|
|
|
|
/*
|
|
* We've been placed in the UP state
|
|
*/
|
|
|
|
static int sealevel_open(struct net_device *d)
|
|
{
|
|
struct slvl_device *slvl = dev_to_chan(d);
|
|
int err = -1;
|
|
int unit = slvl->channel;
|
|
|
|
/*
|
|
* Link layer up.
|
|
*/
|
|
|
|
switch (unit) {
|
|
case 0:
|
|
err = z8530_sync_dma_open(d, slvl->chan);
|
|
break;
|
|
case 1:
|
|
err = z8530_sync_open(d, slvl->chan);
|
|
break;
|
|
}
|
|
|
|
if (err)
|
|
return err;
|
|
|
|
err = hdlc_open(d);
|
|
if (err) {
|
|
switch (unit) {
|
|
case 0:
|
|
z8530_sync_dma_close(d, slvl->chan);
|
|
break;
|
|
case 1:
|
|
z8530_sync_close(d, slvl->chan);
|
|
break;
|
|
}
|
|
return err;
|
|
}
|
|
|
|
slvl->chan->rx_function = sealevel_input;
|
|
|
|
/*
|
|
* Go go go
|
|
*/
|
|
netif_start_queue(d);
|
|
return 0;
|
|
}
|
|
|
|
static int sealevel_close(struct net_device *d)
|
|
{
|
|
struct slvl_device *slvl = dev_to_chan(d);
|
|
int unit = slvl->channel;
|
|
|
|
/*
|
|
* Discard new frames
|
|
*/
|
|
|
|
slvl->chan->rx_function = z8530_null_rx;
|
|
|
|
hdlc_close(d);
|
|
netif_stop_queue(d);
|
|
|
|
switch (unit) {
|
|
case 0:
|
|
z8530_sync_dma_close(d, slvl->chan);
|
|
break;
|
|
case 1:
|
|
z8530_sync_close(d, slvl->chan);
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int sealevel_ioctl(struct net_device *d, struct ifreq *ifr, int cmd)
|
|
{
|
|
/* struct slvl_device *slvl=dev_to_chan(d);
|
|
z8530_ioctl(d,&slvl->sync.chanA,ifr,cmd) */
|
|
return hdlc_ioctl(d, ifr, cmd);
|
|
}
|
|
|
|
/*
|
|
* Passed network frames, fire them downwind.
|
|
*/
|
|
|
|
static netdev_tx_t sealevel_queue_xmit(struct sk_buff *skb,
|
|
struct net_device *d)
|
|
{
|
|
return z8530_queue_xmit(dev_to_chan(d)->chan, skb);
|
|
}
|
|
|
|
static int sealevel_attach(struct net_device *dev, unsigned short encoding,
|
|
unsigned short parity)
|
|
{
|
|
if (encoding == ENCODING_NRZ && parity == PARITY_CRC16_PR1_CCITT)
|
|
return 0;
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const struct net_device_ops sealevel_ops = {
|
|
.ndo_open = sealevel_open,
|
|
.ndo_stop = sealevel_close,
|
|
.ndo_change_mtu = hdlc_change_mtu,
|
|
.ndo_start_xmit = hdlc_start_xmit,
|
|
.ndo_do_ioctl = sealevel_ioctl,
|
|
};
|
|
|
|
static int slvl_setup(struct slvl_device *sv, int iobase, int irq)
|
|
{
|
|
struct net_device *dev = alloc_hdlcdev(sv);
|
|
if (!dev)
|
|
return -1;
|
|
|
|
dev_to_hdlc(dev)->attach = sealevel_attach;
|
|
dev_to_hdlc(dev)->xmit = sealevel_queue_xmit;
|
|
dev->netdev_ops = &sealevel_ops;
|
|
dev->base_addr = iobase;
|
|
dev->irq = irq;
|
|
|
|
if (register_hdlc_device(dev)) {
|
|
pr_err("unable to register HDLC device\n");
|
|
free_netdev(dev);
|
|
return -1;
|
|
}
|
|
|
|
sv->chan->netdevice = dev;
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* Allocate and setup Sealevel board.
|
|
*/
|
|
|
|
static __init struct slvl_board *slvl_init(int iobase, int irq,
|
|
int txdma, int rxdma, int slow)
|
|
{
|
|
struct z8530_dev *dev;
|
|
struct slvl_board *b;
|
|
|
|
/*
|
|
* Get the needed I/O space
|
|
*/
|
|
|
|
if (!request_region(iobase, 8, "Sealevel 4021")) {
|
|
pr_warn("I/O 0x%X already in use\n", iobase);
|
|
return NULL;
|
|
}
|
|
|
|
b = kzalloc(sizeof(struct slvl_board), GFP_KERNEL);
|
|
if (!b)
|
|
goto err_kzalloc;
|
|
|
|
b->dev[0].chan = &b->board.chanA;
|
|
b->dev[0].channel = 0;
|
|
|
|
b->dev[1].chan = &b->board.chanB;
|
|
b->dev[1].channel = 1;
|
|
|
|
dev = &b->board;
|
|
|
|
/*
|
|
* Stuff in the I/O addressing
|
|
*/
|
|
|
|
dev->active = 0;
|
|
|
|
b->iobase = iobase;
|
|
|
|
/*
|
|
* Select 8530 delays for the old board
|
|
*/
|
|
|
|
if (slow)
|
|
iobase |= Z8530_PORT_SLEEP;
|
|
|
|
dev->chanA.ctrlio = iobase + 1;
|
|
dev->chanA.dataio = iobase;
|
|
dev->chanB.ctrlio = iobase + 3;
|
|
dev->chanB.dataio = iobase + 2;
|
|
|
|
dev->chanA.irqs = &z8530_nop;
|
|
dev->chanB.irqs = &z8530_nop;
|
|
|
|
/*
|
|
* Assert DTR enable DMA
|
|
*/
|
|
|
|
outb(3 | (1 << 7), b->iobase + 4);
|
|
|
|
|
|
/* We want a fast IRQ for this device. Actually we'd like an even faster
|
|
IRQ ;) - This is one driver RtLinux is made for */
|
|
|
|
if (request_irq(irq, z8530_interrupt, IRQF_DISABLED,
|
|
"SeaLevel", dev) < 0) {
|
|
pr_warn("IRQ %d already in use\n", irq);
|
|
goto err_request_irq;
|
|
}
|
|
|
|
dev->irq = irq;
|
|
dev->chanA.private = &b->dev[0];
|
|
dev->chanB.private = &b->dev[1];
|
|
dev->chanA.dev = dev;
|
|
dev->chanB.dev = dev;
|
|
|
|
dev->chanA.txdma = 3;
|
|
dev->chanA.rxdma = 1;
|
|
if (request_dma(dev->chanA.txdma, "SeaLevel (TX)"))
|
|
goto err_dma_tx;
|
|
|
|
if (request_dma(dev->chanA.rxdma, "SeaLevel (RX)"))
|
|
goto err_dma_rx;
|
|
|
|
disable_irq(irq);
|
|
|
|
/*
|
|
* Begin normal initialise
|
|
*/
|
|
|
|
if (z8530_init(dev) != 0) {
|
|
pr_err("Z8530 series device not found\n");
|
|
enable_irq(irq);
|
|
goto free_hw;
|
|
}
|
|
if (dev->type == Z85C30) {
|
|
z8530_channel_load(&dev->chanA, z8530_hdlc_kilostream);
|
|
z8530_channel_load(&dev->chanB, z8530_hdlc_kilostream);
|
|
} else {
|
|
z8530_channel_load(&dev->chanA, z8530_hdlc_kilostream_85230);
|
|
z8530_channel_load(&dev->chanB, z8530_hdlc_kilostream_85230);
|
|
}
|
|
|
|
/*
|
|
* Now we can take the IRQ
|
|
*/
|
|
|
|
enable_irq(irq);
|
|
|
|
if (slvl_setup(&b->dev[0], iobase, irq))
|
|
goto free_hw;
|
|
if (slvl_setup(&b->dev[1], iobase, irq))
|
|
goto free_netdev0;
|
|
|
|
z8530_describe(dev, "I/O", iobase);
|
|
dev->active = 1;
|
|
return b;
|
|
|
|
free_netdev0:
|
|
unregister_hdlc_device(b->dev[0].chan->netdevice);
|
|
free_netdev(b->dev[0].chan->netdevice);
|
|
free_hw:
|
|
free_dma(dev->chanA.rxdma);
|
|
err_dma_rx:
|
|
free_dma(dev->chanA.txdma);
|
|
err_dma_tx:
|
|
free_irq(irq, dev);
|
|
err_request_irq:
|
|
kfree(b);
|
|
err_kzalloc:
|
|
release_region(iobase, 8);
|
|
return NULL;
|
|
}
|
|
|
|
static void __exit slvl_shutdown(struct slvl_board *b)
|
|
{
|
|
int u;
|
|
|
|
z8530_shutdown(&b->board);
|
|
|
|
for (u = 0; u < 2; u++) {
|
|
struct net_device *d = b->dev[u].chan->netdevice;
|
|
unregister_hdlc_device(d);
|
|
free_netdev(d);
|
|
}
|
|
|
|
free_irq(b->board.irq, &b->board);
|
|
free_dma(b->board.chanA.rxdma);
|
|
free_dma(b->board.chanA.txdma);
|
|
/* DMA off on the card, drop DTR */
|
|
outb(0, b->iobase);
|
|
release_region(b->iobase, 8);
|
|
kfree(b);
|
|
}
|
|
|
|
|
|
static int io=0x238;
|
|
static int txdma=1;
|
|
static int rxdma=3;
|
|
static int irq=5;
|
|
static int slow=0;
|
|
|
|
module_param(io, int, 0);
|
|
MODULE_PARM_DESC(io, "The I/O base of the Sealevel card");
|
|
module_param(txdma, int, 0);
|
|
MODULE_PARM_DESC(txdma, "Transmit DMA channel");
|
|
module_param(rxdma, int, 0);
|
|
MODULE_PARM_DESC(rxdma, "Receive DMA channel");
|
|
module_param(irq, int, 0);
|
|
MODULE_PARM_DESC(irq, "The interrupt line setting for the SeaLevel card");
|
|
module_param(slow, bool, 0);
|
|
MODULE_PARM_DESC(slow, "Set this for an older Sealevel card such as the 4012");
|
|
|
|
MODULE_AUTHOR("Alan Cox");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("Modular driver for the SeaLevel 4021");
|
|
|
|
static struct slvl_board *slvl_unit;
|
|
|
|
static int __init slvl_init_module(void)
|
|
{
|
|
slvl_unit = slvl_init(io, irq, txdma, rxdma, slow);
|
|
|
|
return slvl_unit ? 0 : -ENODEV;
|
|
}
|
|
|
|
static void __exit slvl_cleanup_module(void)
|
|
{
|
|
if (slvl_unit)
|
|
slvl_shutdown(slvl_unit);
|
|
}
|
|
|
|
module_init(slvl_init_module);
|
|
module_exit(slvl_cleanup_module);
|