kernel_optimize_test/arch/arm/mach-omap/pm.c
Tony Lindgren b3402cf50e [PATCH] ARM: 2771/1: Dynamic Tick support for OMAP, take 4
Patch from Tony Lindgren

This patch adds support for Dynamic Tick Timer for OMAP.
This patch is an updated version of ARM patch 2642/1 to
make it work with the already integrated generic ARM
dyntick support.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-29 19:59:48 +01:00

633 lines
17 KiB
C

/*
* linux/arch/arm/mach-omap/pm.c
*
* OMAP Power Management Routines
*
* Original code for the SA11x0:
* Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
*
* Modified for the PXA250 by Nicolas Pitre:
* Copyright (c) 2002 Monta Vista Software, Inc.
*
* Modified for the OMAP1510 by David Singleton:
* Copyright (c) 2002 Monta Vista Software, Inc.
*
* Cleanup 2004 for OMAP1510/1610 by Dirk Behme <dirk.behme@de.bosch.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/pm.h>
#include <linux/sched.h>
#include <linux/proc_fs.h>
#include <linux/pm.h>
#include <asm/io.h>
#include <asm/mach/time.h>
#include <asm/mach-types.h>
#include <asm/arch/omap16xx.h>
#include <asm/arch/pm.h>
#include <asm/arch/mux.h>
#include <asm/arch/tc.h>
#include <asm/arch/tps65010.h>
#include "clock.h"
static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE];
static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE];
static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE];
/*
* Let's power down on idle, but only if we are really
* idle, because once we start down the path of
* going idle we continue to do idle even if we get
* a clock tick interrupt . .
*/
void omap_pm_idle(void)
{
int (*func_ptr)(void) = 0;
unsigned int mask32 = 0;
/*
* If the DSP is being used let's just idle the CPU, the overhead
* to wake up from Big Sleep is big, milliseconds versus micro
* seconds for wait for interrupt.
*/
local_irq_disable();
local_fiq_disable();
if (need_resched()) {
local_fiq_enable();
local_irq_enable();
return;
}
mask32 = omap_readl(ARM_SYSST);
/*
* Since an interrupt may set up a timer, we don't want to
* reprogram the hardware timer with interrupts enabled.
* Re-enable interrupts only after returning from idle.
*/
timer_dyn_reprogram();
if ((mask32 & DSP_IDLE) == 0) {
__asm__ volatile ("mcr p15, 0, r0, c7, c0, 4");
} else {
if (cpu_is_omap1510()) {
func_ptr = (void *)(OMAP1510_SRAM_IDLE_SUSPEND);
} else if (cpu_is_omap1610() || cpu_is_omap1710()) {
func_ptr = (void *)(OMAP1610_SRAM_IDLE_SUSPEND);
} else if (cpu_is_omap5912()) {
func_ptr = (void *)(OMAP5912_SRAM_IDLE_SUSPEND);
}
func_ptr();
}
local_fiq_enable();
local_irq_enable();
}
/*
* Configuration of the wakeup event is board specific. For the
* moment we put it into this helper function. Later it may move
* to board specific files.
*/
static void omap_pm_wakeup_setup(void)
{
/*
* Enable ARM XOR clock and release peripheral from reset by
* writing 1 to PER_EN bit in ARM_RSTCT2, this is required
* for UART configuration to use UART2 to wake up.
*/
omap_writel(omap_readl(ARM_IDLECT2) | ENABLE_XORCLK, ARM_IDLECT2);
omap_writel(omap_readl(ARM_RSTCT2) | PER_EN, ARM_RSTCT2);
omap_writew(MODEM_32K_EN, ULPD_CLOCK_CTRL);
/*
* Turn off all interrupts except L1-2nd level cascade,
* and the L2 wakeup interrupts: keypad and UART2.
*/
omap_writel(~IRQ_LEVEL2, OMAP_IH1_MIR);
if (cpu_is_omap1510()) {
omap_writel(~(IRQ_UART2 | IRQ_KEYBOARD), OMAP_IH2_MIR);
}
if (cpu_is_omap16xx()) {
omap_writel(~(IRQ_UART2 | IRQ_KEYBOARD), OMAP_IH2_0_MIR);
omap_writel(~0x0, OMAP_IH2_1_MIR);
omap_writel(~0x0, OMAP_IH2_2_MIR);
omap_writel(~0x0, OMAP_IH2_3_MIR);
}
/* New IRQ agreement */
omap_writel(1, OMAP_IH1_CONTROL);
/* external PULL to down, bit 22 = 0 */
omap_writel(omap_readl(PULL_DWN_CTRL_2) & ~(1<<22), PULL_DWN_CTRL_2);
}
void omap_pm_suspend(void)
{
unsigned int mask32 = 0;
unsigned long arg0 = 0, arg1 = 0;
int (*func_ptr)(unsigned short, unsigned short) = 0;
unsigned short save_dsp_idlect2;
printk("PM: OMAP%x is entering deep sleep now ...\n", system_rev);
if (machine_is_omap_osk()) {
/* Stop LED1 (D9) blink */
tps65010_set_led(LED1, OFF);
}
/*
* Step 1: turn off interrupts
*/
local_irq_disable();
local_fiq_disable();
/*
* Step 2: save registers
*
* The omap is a strange/beautiful device. The caches, memory
* and register state are preserved across power saves.
* We have to save and restore very little register state to
* idle the omap.
*
* Save interrupt, MPUI, ARM and UPLD control registers.
*/
if (cpu_is_omap1510()) {
MPUI1510_SAVE(OMAP_IH1_MIR);
MPUI1510_SAVE(OMAP_IH2_MIR);
MPUI1510_SAVE(MPUI_CTRL);
MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG);
MPUI1510_SAVE(MPUI_DSP_API_CONFIG);
MPUI1510_SAVE(EMIFS_CONFIG);
MPUI1510_SAVE(EMIFF_SDRAM_CONFIG);
} else if (cpu_is_omap16xx()) {
MPUI1610_SAVE(OMAP_IH1_MIR);
MPUI1610_SAVE(OMAP_IH2_0_MIR);
MPUI1610_SAVE(OMAP_IH2_1_MIR);
MPUI1610_SAVE(OMAP_IH2_2_MIR);
MPUI1610_SAVE(OMAP_IH2_3_MIR);
MPUI1610_SAVE(MPUI_CTRL);
MPUI1610_SAVE(MPUI_DSP_BOOT_CONFIG);
MPUI1610_SAVE(MPUI_DSP_API_CONFIG);
MPUI1610_SAVE(EMIFS_CONFIG);
MPUI1610_SAVE(EMIFF_SDRAM_CONFIG);
}
ARM_SAVE(ARM_CKCTL);
ARM_SAVE(ARM_IDLECT1);
ARM_SAVE(ARM_IDLECT2);
ARM_SAVE(ARM_EWUPCT);
ARM_SAVE(ARM_RSTCT1);
ARM_SAVE(ARM_RSTCT2);
ARM_SAVE(ARM_SYSST);
ULPD_SAVE(ULPD_CLOCK_CTRL);
ULPD_SAVE(ULPD_STATUS_REQ);
/*
* Step 3: LOW_PWR signal enabling
*
* Allow the LOW_PWR signal to be visible on MPUIO5 ball.
*/
if (cpu_is_omap1510()) {
/* POWER_CTRL_REG = 0x1 (LOW_POWER is available) */
omap_writew(omap_readw(ULPD_POWER_CTRL) |
OMAP1510_ULPD_LOW_POWER_REQ, ULPD_POWER_CTRL);
} else if (cpu_is_omap16xx()) {
/* POWER_CTRL_REG = 0x1 (LOW_POWER is available) */
omap_writew(omap_readw(ULPD_POWER_CTRL) |
OMAP1610_ULPD_LOW_POWER_REQ, ULPD_POWER_CTRL);
}
/* configure LOW_PWR pin */
omap_cfg_reg(T20_1610_LOW_PWR);
/*
* Step 4: OMAP DSP Shutdown
*/
/* Set DSP_RST = 1 and DSP_EN = 0, put DSP block into reset */
omap_writel((omap_readl(ARM_RSTCT1) | DSP_RST) & ~DSP_ENABLE,
ARM_RSTCT1);
/* Set DSP boot mode to DSP-IDLE, DSP_BOOT_MODE = 0x2 */
omap_writel(DSP_IDLE_MODE, MPUI_DSP_BOOT_CONFIG);
/* Set EN_DSPCK = 0, stop DSP block clock */
omap_writel(omap_readl(ARM_CKCTL) & ~DSP_CLOCK_ENABLE, ARM_CKCTL);
/* Stop any DSP domain clocks */
omap_writel(omap_readl(ARM_IDLECT2) | (1<<EN_APICK), ARM_IDLECT2);
save_dsp_idlect2 = __raw_readw(DSP_IDLECT2);
__raw_writew(0, DSP_IDLECT2);
/*
* Step 5: Wakeup Event Setup
*/
omap_pm_wakeup_setup();
/*
* Step 6a: ARM and Traffic controller shutdown
*
* Step 6 starts here with clock and watchdog disable
*/
/* stop clocks */
mask32 = omap_readl(ARM_IDLECT2);
mask32 &= ~(1<<EN_WDTCK); /* bit 0 -> 0 (WDT clock) */
mask32 |= (1<<EN_XORPCK); /* bit 1 -> 1 (XORPCK clock) */
mask32 &= ~(1<<EN_PERCK); /* bit 2 -> 0 (MPUPER_CK clock) */
mask32 &= ~(1<<EN_LCDCK); /* bit 3 -> 0 (LCDC clock) */
mask32 &= ~(1<<EN_LBCK); /* bit 4 -> 0 (local bus clock) */
mask32 |= (1<<EN_APICK); /* bit 6 -> 1 (MPUI clock) */
mask32 &= ~(1<<EN_TIMCK); /* bit 7 -> 0 (MPU timer clock) */
mask32 &= ~(1<<DMACK_REQ); /* bit 8 -> 0 (DMAC clock) */
mask32 &= ~(1<<EN_GPIOCK); /* bit 9 -> 0 (GPIO clock) */
omap_writel(mask32, ARM_IDLECT2);
/* disable ARM watchdog */
omap_writel(0x00F5, OMAP_WDT_TIMER_MODE);
omap_writel(0x00A0, OMAP_WDT_TIMER_MODE);
/*
* Step 6b: ARM and Traffic controller shutdown
*
* Step 6 continues here. Prepare jump to power management
* assembly code in internal SRAM.
*
* Since the omap_cpu_suspend routine has been copied to
* SRAM, we'll do an indirect procedure call to it and pass the
* contents of arm_idlect1 and arm_idlect2 so it can restore
* them when it wakes up and it will return.
*/
arg0 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT1];
arg1 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT2];
if (cpu_is_omap1510()) {
func_ptr = (void *)(OMAP1510_SRAM_API_SUSPEND);
} else if (cpu_is_omap1610() || cpu_is_omap1710()) {
func_ptr = (void *)(OMAP1610_SRAM_API_SUSPEND);
} else if (cpu_is_omap5912()) {
func_ptr = (void *)(OMAP5912_SRAM_API_SUSPEND);
}
/*
* Step 6c: ARM and Traffic controller shutdown
*
* Jump to assembly code. The processor will stay there
* until wake up.
*/
func_ptr(arg0, arg1);
/*
* If we are here, processor is woken up!
*/
if (cpu_is_omap1510()) {
/* POWER_CTRL_REG = 0x0 (LOW_POWER is disabled) */
omap_writew(omap_readw(ULPD_POWER_CTRL) &
~OMAP1510_ULPD_LOW_POWER_REQ, ULPD_POWER_CTRL);
} else if (cpu_is_omap16xx()) {
/* POWER_CTRL_REG = 0x0 (LOW_POWER is disabled) */
omap_writew(omap_readw(ULPD_POWER_CTRL) &
~OMAP1610_ULPD_LOW_POWER_REQ, ULPD_POWER_CTRL);
}
/* Restore DSP clocks */
omap_writel(omap_readl(ARM_IDLECT2) | (1<<EN_APICK), ARM_IDLECT2);
__raw_writew(save_dsp_idlect2, DSP_IDLECT2);
ARM_RESTORE(ARM_IDLECT2);
/*
* Restore ARM state, except ARM_IDLECT1/2 which omap_cpu_suspend did
*/
ARM_RESTORE(ARM_CKCTL);
ARM_RESTORE(ARM_EWUPCT);
ARM_RESTORE(ARM_RSTCT1);
ARM_RESTORE(ARM_RSTCT2);
ARM_RESTORE(ARM_SYSST);
ULPD_RESTORE(ULPD_CLOCK_CTRL);
ULPD_RESTORE(ULPD_STATUS_REQ);
if (cpu_is_omap1510()) {
MPUI1510_RESTORE(MPUI_CTRL);
MPUI1510_RESTORE(MPUI_DSP_BOOT_CONFIG);
MPUI1510_RESTORE(MPUI_DSP_API_CONFIG);
MPUI1510_RESTORE(EMIFS_CONFIG);
MPUI1510_RESTORE(EMIFF_SDRAM_CONFIG);
MPUI1510_RESTORE(OMAP_IH1_MIR);
MPUI1510_RESTORE(OMAP_IH2_MIR);
} else if (cpu_is_omap16xx()) {
MPUI1610_RESTORE(MPUI_CTRL);
MPUI1610_RESTORE(MPUI_DSP_BOOT_CONFIG);
MPUI1610_RESTORE(MPUI_DSP_API_CONFIG);
MPUI1610_RESTORE(EMIFS_CONFIG);
MPUI1610_RESTORE(EMIFF_SDRAM_CONFIG);
MPUI1610_RESTORE(OMAP_IH1_MIR);
MPUI1610_RESTORE(OMAP_IH2_0_MIR);
MPUI1610_RESTORE(OMAP_IH2_1_MIR);
MPUI1610_RESTORE(OMAP_IH2_2_MIR);
MPUI1610_RESTORE(OMAP_IH2_3_MIR);
}
/*
* Reenable interrupts
*/
local_irq_enable();
local_fiq_enable();
printk("PM: OMAP%x is re-starting from deep sleep...\n", system_rev);
if (machine_is_omap_osk()) {
/* Let LED1 (D9) blink again */
tps65010_set_led(LED1, BLINK);
}
}
#if defined(DEBUG) && defined(CONFIG_PROC_FS)
static int g_read_completed;
/*
* Read system PM registers for debugging
*/
static int omap_pm_read_proc(
char *page_buffer,
char **my_first_byte,
off_t virtual_start,
int length,
int *eof,
void *data)
{
int my_buffer_offset = 0;
char * const my_base = page_buffer;
ARM_SAVE(ARM_CKCTL);
ARM_SAVE(ARM_IDLECT1);
ARM_SAVE(ARM_IDLECT2);
ARM_SAVE(ARM_EWUPCT);
ARM_SAVE(ARM_RSTCT1);
ARM_SAVE(ARM_RSTCT2);
ARM_SAVE(ARM_SYSST);
ULPD_SAVE(ULPD_IT_STATUS);
ULPD_SAVE(ULPD_CLOCK_CTRL);
ULPD_SAVE(ULPD_SOFT_REQ);
ULPD_SAVE(ULPD_STATUS_REQ);
ULPD_SAVE(ULPD_DPLL_CTRL);
ULPD_SAVE(ULPD_POWER_CTRL);
if (cpu_is_omap1510()) {
MPUI1510_SAVE(MPUI_CTRL);
MPUI1510_SAVE(MPUI_DSP_STATUS);
MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG);
MPUI1510_SAVE(MPUI_DSP_API_CONFIG);
MPUI1510_SAVE(EMIFF_SDRAM_CONFIG);
MPUI1510_SAVE(EMIFS_CONFIG);
} else if (cpu_is_omap16xx()) {
MPUI1610_SAVE(MPUI_CTRL);
MPUI1610_SAVE(MPUI_DSP_STATUS);
MPUI1610_SAVE(MPUI_DSP_BOOT_CONFIG);
MPUI1610_SAVE(MPUI_DSP_API_CONFIG);
MPUI1610_SAVE(EMIFF_SDRAM_CONFIG);
MPUI1610_SAVE(EMIFS_CONFIG);
}
if (virtual_start == 0) {
g_read_completed = 0;
my_buffer_offset += sprintf(my_base + my_buffer_offset,
"ARM_CKCTL_REG: 0x%-8x \n"
"ARM_IDLECT1_REG: 0x%-8x \n"
"ARM_IDLECT2_REG: 0x%-8x \n"
"ARM_EWUPCT_REG: 0x%-8x \n"
"ARM_RSTCT1_REG: 0x%-8x \n"
"ARM_RSTCT2_REG: 0x%-8x \n"
"ARM_SYSST_REG: 0x%-8x \n"
"ULPD_IT_STATUS_REG: 0x%-4x \n"
"ULPD_CLOCK_CTRL_REG: 0x%-4x \n"
"ULPD_SOFT_REQ_REG: 0x%-4x \n"
"ULPD_DPLL_CTRL_REG: 0x%-4x \n"
"ULPD_STATUS_REQ_REG: 0x%-4x \n"
"ULPD_POWER_CTRL_REG: 0x%-4x \n",
ARM_SHOW(ARM_CKCTL),
ARM_SHOW(ARM_IDLECT1),
ARM_SHOW(ARM_IDLECT2),
ARM_SHOW(ARM_EWUPCT),
ARM_SHOW(ARM_RSTCT1),
ARM_SHOW(ARM_RSTCT2),
ARM_SHOW(ARM_SYSST),
ULPD_SHOW(ULPD_IT_STATUS),
ULPD_SHOW(ULPD_CLOCK_CTRL),
ULPD_SHOW(ULPD_SOFT_REQ),
ULPD_SHOW(ULPD_DPLL_CTRL),
ULPD_SHOW(ULPD_STATUS_REQ),
ULPD_SHOW(ULPD_POWER_CTRL));
if (cpu_is_omap1510()) {
my_buffer_offset += sprintf(my_base + my_buffer_offset,
"MPUI1510_CTRL_REG 0x%-8x \n"
"MPUI1510_DSP_STATUS_REG: 0x%-8x \n"
"MPUI1510_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
"MPUI1510_DSP_API_CONFIG_REG: 0x%-8x \n"
"MPUI1510_SDRAM_CONFIG_REG: 0x%-8x \n"
"MPUI1510_EMIFS_CONFIG_REG: 0x%-8x \n",
MPUI1510_SHOW(MPUI_CTRL),
MPUI1510_SHOW(MPUI_DSP_STATUS),
MPUI1510_SHOW(MPUI_DSP_BOOT_CONFIG),
MPUI1510_SHOW(MPUI_DSP_API_CONFIG),
MPUI1510_SHOW(EMIFF_SDRAM_CONFIG),
MPUI1510_SHOW(EMIFS_CONFIG));
} else if (cpu_is_omap16xx()) {
my_buffer_offset += sprintf(my_base + my_buffer_offset,
"MPUI1610_CTRL_REG 0x%-8x \n"
"MPUI1610_DSP_STATUS_REG: 0x%-8x \n"
"MPUI1610_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
"MPUI1610_DSP_API_CONFIG_REG: 0x%-8x \n"
"MPUI1610_SDRAM_CONFIG_REG: 0x%-8x \n"
"MPUI1610_EMIFS_CONFIG_REG: 0x%-8x \n",
MPUI1610_SHOW(MPUI_CTRL),
MPUI1610_SHOW(MPUI_DSP_STATUS),
MPUI1610_SHOW(MPUI_DSP_BOOT_CONFIG),
MPUI1610_SHOW(MPUI_DSP_API_CONFIG),
MPUI1610_SHOW(EMIFF_SDRAM_CONFIG),
MPUI1610_SHOW(EMIFS_CONFIG));
}
g_read_completed++;
} else if (g_read_completed >= 1) {
*eof = 1;
return 0;
}
g_read_completed++;
*my_first_byte = page_buffer;
return my_buffer_offset;
}
static void omap_pm_init_proc(void)
{
struct proc_dir_entry *entry;
entry = create_proc_read_entry("driver/omap_pm",
S_IWUSR | S_IRUGO, NULL,
omap_pm_read_proc, 0);
}
#endif /* DEBUG && CONFIG_PROC_FS */
/*
* omap_pm_prepare - Do preliminary suspend work.
* @state: suspend state we're entering.
*
*/
//#include <asm/arch/hardware.h>
static int omap_pm_prepare(suspend_state_t state)
{
int error = 0;
switch (state)
{
case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
break;
case PM_SUSPEND_DISK:
return -ENOTSUPP;
default:
return -EINVAL;
}
return error;
}
/*
* omap_pm_enter - Actually enter a sleep state.
* @state: State we're entering.
*
*/
static int omap_pm_enter(suspend_state_t state)
{
switch (state)
{
case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
omap_pm_suspend();
break;
case PM_SUSPEND_DISK:
return -ENOTSUPP;
default:
return -EINVAL;
}
return 0;
}
/**
* omap_pm_finish - Finish up suspend sequence.
* @state: State we're coming out of.
*
* This is called after we wake back up (or if entering the sleep state
* failed).
*/
static int omap_pm_finish(suspend_state_t state)
{
return 0;
}
struct pm_ops omap_pm_ops ={
.pm_disk_mode = 0,
.prepare = omap_pm_prepare,
.enter = omap_pm_enter,
.finish = omap_pm_finish,
};
static int __init omap_pm_init(void)
{
printk("Power Management for TI OMAP.\n");
pm_idle = omap_pm_idle;
/*
* We copy the assembler sleep/wakeup routines to SRAM.
* These routines need to be in SRAM as that's the only
* memory the MPU can see when it wakes up.
*/
#ifdef CONFIG_ARCH_OMAP1510
if (cpu_is_omap1510()) {
memcpy((void *)OMAP1510_SRAM_IDLE_SUSPEND,
omap1510_idle_loop_suspend,
omap1510_idle_loop_suspend_sz);
memcpy((void *)OMAP1510_SRAM_API_SUSPEND, omap1510_cpu_suspend,
omap1510_cpu_suspend_sz);
} else
#endif
if (cpu_is_omap1610() || cpu_is_omap1710()) {
memcpy((void *)OMAP1610_SRAM_IDLE_SUSPEND,
omap1610_idle_loop_suspend,
omap1610_idle_loop_suspend_sz);
memcpy((void *)OMAP1610_SRAM_API_SUSPEND, omap1610_cpu_suspend,
omap1610_cpu_suspend_sz);
} else if (cpu_is_omap5912()) {
memcpy((void *)OMAP5912_SRAM_IDLE_SUSPEND,
omap1610_idle_loop_suspend,
omap1610_idle_loop_suspend_sz);
memcpy((void *)OMAP5912_SRAM_API_SUSPEND, omap1610_cpu_suspend,
omap1610_cpu_suspend_sz);
}
pm_set_ops(&omap_pm_ops);
#if defined(DEBUG) && defined(CONFIG_PROC_FS)
omap_pm_init_proc();
#endif
return 0;
}
__initcall(omap_pm_init);