forked from luck/tmp_suning_uos_patched
f7a388d6cd
The Gemini (SL3516) SoC has a special power controller block that only deal with shutting down the system. If you do not register a driver and activate the block, the power button on the systems utilizing this SoC will do an uncontrolled power cut, which is why it is important to have a special poweroff driver. The most basic functionality is to just shut down the system by writing a special bit in the control register after the system has reached pm_poweroff. It also handles the poweroff from a button or other sources: When the poweroff button is pressed, or a signal is sent to poweroff from an infrared remote control, or when the RTC fires a special alarm (!) the system emits an interrupt. At this point, Linux must acknowledge the interrupt and proceed to do an orderly shutdown of the system. After adding this driver, pressing the poweroff button gives this dmesg: root@gemini:/ root@gemini:/ gemini-poweroff 4b000000.power-controller: poweroff button pressed calling shutdown scripts.. setting /dev/rtc0 from system time unmounting file systems... umount: tmpfs busy - remounted read-only umount: can't unmount /: Invalid argument The system is going down NOW! Sent SIGTERM to all processes Sent SIGKILL to all processes Requesting system poweroff uhci_hcd 0000:00:09.1: HCRESET not completed yet! uhci_hcd 0000:00:09.0: HCRESET not completed yet! reboot: Power down gemini-poweroff 4b000000.power-controller: Gemini power off Cc: Janos Laube <janos.dev@gmail.com> Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-pm@vger.kernel.org Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sebastian Reichel <sre@kernel.org>
232 lines
6.3 KiB
Plaintext
232 lines
6.3 KiB
Plaintext
menuconfig POWER_RESET
|
|
bool "Board level reset or power off"
|
|
help
|
|
Provides a number of drivers which either reset a complete board
|
|
or shut it down, by manipulating the main power supply on the board.
|
|
|
|
Say Y here to enable board reset and power off
|
|
|
|
if POWER_RESET
|
|
|
|
config POWER_RESET_AS3722
|
|
bool "ams AS3722 power-off driver"
|
|
depends on MFD_AS3722
|
|
help
|
|
This driver supports turning off board via a ams AS3722 power-off.
|
|
|
|
config POWER_RESET_AT91_POWEROFF
|
|
tristate "Atmel AT91 poweroff driver"
|
|
depends on ARCH_AT91
|
|
default SOC_AT91SAM9 || SOC_SAMA5
|
|
help
|
|
This driver supports poweroff for Atmel AT91SAM9 and SAMA5
|
|
SoCs
|
|
|
|
config POWER_RESET_AT91_RESET
|
|
tristate "Atmel AT91 reset driver"
|
|
depends on ARCH_AT91
|
|
default SOC_AT91SAM9 || SOC_SAMA5
|
|
help
|
|
This driver supports restart for Atmel AT91SAM9 and SAMA5
|
|
SoCs
|
|
|
|
config POWER_RESET_AT91_SAMA5D2_SHDWC
|
|
tristate "Atmel AT91 SAMA5D2-Compatible shutdown controller driver"
|
|
depends on ARCH_AT91
|
|
default SOC_SAMA5
|
|
help
|
|
This driver supports the alternate shutdown controller for some Atmel
|
|
SAMA5 SoCs. It is present for example on SAMA5D2 SoC.
|
|
|
|
config POWER_RESET_AXXIA
|
|
bool "LSI Axxia reset driver"
|
|
depends on ARCH_AXXIA
|
|
help
|
|
This driver supports restart for Axxia SoC.
|
|
|
|
Say Y if you have an Axxia family SoC.
|
|
|
|
config POWER_RESET_BRCMKONA
|
|
bool "Broadcom Kona reset driver"
|
|
depends on ARM || COMPILE_TEST
|
|
default ARCH_BCM_MOBILE
|
|
help
|
|
This driver provides restart support for Broadcom Kona chips.
|
|
|
|
Say Y here if you have a Broadcom Kona-based board and you wish
|
|
to have restart support.
|
|
|
|
config POWER_RESET_BRCMSTB
|
|
bool "Broadcom STB reset driver"
|
|
depends on ARM || MIPS || COMPILE_TEST
|
|
depends on MFD_SYSCON
|
|
default ARCH_BRCMSTB
|
|
help
|
|
This driver provides restart support for Broadcom STB boards.
|
|
|
|
Say Y here if you have a Broadcom STB board and you wish
|
|
to have restart support.
|
|
|
|
config POWER_RESET_GEMINI_POWEROFF
|
|
bool "Cortina Gemini power-off driver"
|
|
depends on ARCH_GEMINI || COMPILE_TEST
|
|
depends on OF && HAS_IOMEM
|
|
default ARCH_GEMINI
|
|
help
|
|
This driver supports turning off the Cortina Gemini SoC.
|
|
Select this if you're building a kernel with Gemini SoC support.
|
|
|
|
config POWER_RESET_GPIO
|
|
bool "GPIO power-off driver"
|
|
depends on OF_GPIO
|
|
help
|
|
This driver supports turning off your board via a GPIO line.
|
|
If your board needs a GPIO high/low to power down, say Y and
|
|
create a binding in your devicetree.
|
|
|
|
config POWER_RESET_GPIO_RESTART
|
|
bool "GPIO restart driver"
|
|
depends on OF_GPIO
|
|
help
|
|
This driver supports restarting your board via a GPIO line.
|
|
If your board needs a GPIO high/low to restart, say Y and
|
|
create a binding in your devicetree.
|
|
|
|
config POWER_RESET_HISI
|
|
bool "Hisilicon power-off driver"
|
|
depends on ARCH_HISI
|
|
help
|
|
Reboot support for Hisilicon boards.
|
|
|
|
config POWER_RESET_IMX
|
|
bool "IMX6 power-off driver"
|
|
depends on POWER_RESET && SOC_IMX6
|
|
help
|
|
This driver support power off external PMIC by PMIC_ON_REQ on i.mx6
|
|
boards.If you want to use other pin to control external power,please
|
|
say N here or disable in dts to make sure pm_power_off never be
|
|
overwrote wrongly by this driver.
|
|
|
|
config POWER_RESET_MSM
|
|
bool "Qualcomm MSM power-off driver"
|
|
depends on ARCH_QCOM
|
|
help
|
|
Power off and restart support for Qualcomm boards.
|
|
|
|
config POWER_RESET_PIIX4_POWEROFF
|
|
tristate "Intel PIIX4 power-off driver"
|
|
depends on PCI
|
|
depends on MIPS || COMPILE_TEST
|
|
help
|
|
This driver supports powering off a system using the Intel PIIX4
|
|
southbridge, for example the MIPS Malta development board. The
|
|
southbridge SOff state is entered in response to a request to
|
|
power off the system.
|
|
|
|
config POWER_RESET_LTC2952
|
|
bool "LTC2952 PowerPath power-off driver"
|
|
depends on OF_GPIO
|
|
help
|
|
This driver supports an external powerdown trigger and board power
|
|
down via the LTC2952. Bindings are made in the device tree.
|
|
|
|
config POWER_RESET_QNAP
|
|
bool "QNAP power-off driver"
|
|
depends on OF_GPIO && PLAT_ORION
|
|
help
|
|
This driver supports turning off QNAP NAS devices by sending
|
|
commands to the microcontroller which controls the main power.
|
|
|
|
Say Y if you have a QNAP NAS.
|
|
|
|
config POWER_RESET_RESTART
|
|
bool "Restart power-off driver"
|
|
help
|
|
Some boards don't actually have the ability to power off.
|
|
Instead they restart, and u-boot holds the SoC until the
|
|
user presses a key. u-boot then boots into Linux.
|
|
|
|
config POWER_RESET_ST
|
|
bool "ST restart driver"
|
|
depends on ARCH_STI
|
|
help
|
|
Reset support for STMicroelectronics boards.
|
|
|
|
config POWER_RESET_VERSATILE
|
|
bool "ARM Versatile family reboot driver"
|
|
depends on ARM
|
|
depends on MFD_SYSCON
|
|
depends on OF
|
|
help
|
|
Power off and restart support for ARM Versatile family of
|
|
reference boards.
|
|
|
|
config POWER_RESET_VEXPRESS
|
|
bool "ARM Versatile Express power-off and reset driver"
|
|
depends on ARM || ARM64
|
|
depends on VEXPRESS_CONFIG
|
|
help
|
|
Power off and reset support for the ARM Ltd. Versatile
|
|
Express boards.
|
|
|
|
config POWER_RESET_XGENE
|
|
bool "APM SoC X-Gene reset driver"
|
|
depends on ARM64
|
|
help
|
|
Reboot support for the APM SoC X-Gene Eval boards.
|
|
|
|
config POWER_RESET_KEYSTONE
|
|
bool "Keystone reset driver"
|
|
depends on ARCH_KEYSTONE || COMPILE_TEST
|
|
depends on HAS_IOMEM
|
|
select MFD_SYSCON
|
|
help
|
|
Reboot support for the KEYSTONE SoCs.
|
|
|
|
config POWER_RESET_SYSCON
|
|
bool "Generic SYSCON regmap reset driver"
|
|
depends on OF
|
|
depends on HAS_IOMEM
|
|
select MFD_SYSCON
|
|
help
|
|
Reboot support for generic SYSCON mapped register reset.
|
|
|
|
config POWER_RESET_SYSCON_POWEROFF
|
|
bool "Generic SYSCON regmap poweroff driver"
|
|
depends on OF
|
|
depends on HAS_IOMEM
|
|
select MFD_SYSCON
|
|
help
|
|
Poweroff support for generic SYSCON mapped register poweroff.
|
|
|
|
config POWER_RESET_RMOBILE
|
|
tristate "Renesas R-Mobile reset driver"
|
|
depends on ARCH_RMOBILE || COMPILE_TEST
|
|
depends on HAS_IOMEM
|
|
help
|
|
Reboot support for Renesas R-Mobile and SH-Mobile SoCs.
|
|
|
|
config POWER_RESET_ZX
|
|
tristate "ZTE SoCs reset driver"
|
|
depends on ARCH_ZX || COMPILE_TEST
|
|
depends on HAS_IOMEM
|
|
help
|
|
Reboot support for ZTE SoCs.
|
|
|
|
config REBOOT_MODE
|
|
tristate
|
|
|
|
config SYSCON_REBOOT_MODE
|
|
tristate "Generic SYSCON regmap reboot mode driver"
|
|
depends on OF
|
|
depends on MFD_SYSCON
|
|
select REBOOT_MODE
|
|
help
|
|
Say y here will enable reboot mode driver. This will
|
|
get reboot mode arguments and store it in SYSCON mapped
|
|
register, then the bootloader can read it to take different
|
|
action according to the mode.
|
|
|
|
endif
|
|
|