forked from luck/tmp_suning_uos_patched
bf1b132836
Harmony has both an external mic (a regular mic jack) and an internal mic (a 0.1" two-pin header on the board). The external mic is connected to the WM8903's IN1L pin, and is supported by the current driver. The internal mic is connected to the WM8903's IN1R pin, and is not supported by the current driver. It appears that no Harmony systems were shipped with any internal mic connected; users were expected to provide their own. This makes the internal mic connection less interesting. The WM8903's Mic Bias signal is used for both of these mics. For each mic, a GPIO drives a transistor which gates whether the mic bias signal is actively connected to that mic, or isolated from it. The dual use of the mic bias for both mics makes a general-purpose complete implementation of mic detection using the mic bias complex. So, for simplicity, the internal mic is currently ignored by the driver. This patch configures the relevant GPIOs to enable the mic bias connection to the external mic, and disable the mic bias connection to the internal mic. Note that in practice, this is the default state if these GPIOs aren't configured. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> |
||
|---|---|---|
| .. | ||
| aoa | ||
| arm | ||
| atmel | ||
| core | ||
| drivers | ||
| i2c | ||
| isa | ||
| mips | ||
| oss | ||
| parisc | ||
| pci | ||
| pcmcia | ||
| ppc | ||
| sh | ||
| soc | ||
| sparc | ||
| spi | ||
| synth | ||
| usb | ||
| ac97_bus.c | ||
| Kconfig | ||
| last.c | ||
| Makefile | ||
| sound_core.c | ||
| sound_firmware.c | ||