kernel_optimize_test/drivers/misc/bmp085-spi.c
Eric Andersson 985087dbcb misc: add support for bmp18x chips to the bmp085 driver
The bmp18x chip family comes in an I2C respectively SPI variant.
Hence, the bmp085 driver was split to support both buses.

Tested-by: Zhengguang Guo <zhengguang.guo@bosch-sensortec.com>
Reviewed-by: Stefan Nilsson <stefan.nilsson@unixphere.com>
Signed-off-by: Eric Andersson <eric.andersson@unixphere.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-18 14:57:14 -07:00

92 lines
2.3 KiB
C

/*
* Copyright (c) 2012 Bosch Sensortec GmbH
* Copyright (c) 2012 Unixphere AB
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
#include <linux/spi/spi.h>
#include <linux/err.h>
#include "bmp085.h"
static int __devinit bmp085_spi_probe(struct spi_device *client)
{
int err;
struct regmap *regmap;
client->bits_per_word = 8;
err = spi_setup(client);
if (err < 0) {
dev_err(&client->dev, "spi_setup failed!\n");
return err;
}
regmap = devm_regmap_init_spi(client, &bmp085_regmap_config);
if (IS_ERR(regmap)) {
err = PTR_ERR(regmap);
dev_err(&client->dev, "Failed to init regmap: %d\n", err);
return err;
}
return bmp085_probe(&client->dev, regmap);
}
static int bmp085_spi_remove(struct spi_device *client)
{
return bmp085_remove(&client->dev);
}
static const struct of_device_id bmp085_of_match[] = {
{ .compatible = "bosch,bmp085", },
{ },
};
MODULE_DEVICE_TABLE(of, bmp085_of_match);
static const struct spi_device_id bmp085_id[] = {
{ "bmp180", 0 },
{ "bmp181", 0 },
{ }
};
MODULE_DEVICE_TABLE(spi, bmp085_id);
static struct spi_driver bmp085_spi_driver = {
.driver = {
.owner = THIS_MODULE,
.name = BMP085_NAME,
.of_match_table = bmp085_of_match
},
.id_table = bmp085_id,
.probe = bmp085_spi_probe,
.remove = __devexit_p(bmp085_spi_remove)
};
static int __init bmp085_spi_init(void)
{
return spi_register_driver(&bmp085_spi_driver);
}
static void __exit bmp085_spi_exit(void)
{
spi_unregister_driver(&bmp085_spi_driver);
}
MODULE_AUTHOR("Eric Andersson <eric.andersson@unixphere.com>");
MODULE_DESCRIPTION("BMP085 SPI bus driver");
MODULE_LICENSE("GPL");
module_init(bmp085_spi_init);
module_exit(bmp085_spi_exit);