AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
c27889cdb4
kernel_optimize_test/drivers/iio/dac/Kconfig
Greg Kroah-Hartman 3c9a6793bd Second round of new iio device support, features and cleanups in the 4.8 cycle 
Firstly some contact detail updates:
 * NXP took over freescale. Update the mma8452 header to reflect this.
 * Martin Kepplinger email address change in mma8452 header.
 * Adriana Reus has changed email address. Update .mailmap.
 * Matt Ranostay has changed email address. Update .mailmap.
 
 New Device Support
 * max1363
   - add the missing i2c_device_ids for a couple of parts so they can actually
     be used.
 * ms5867
   - add device ids for ms5805 and ms5837 parts.
 
 New Features
 * ad5755
   - DT support.  This one was a bit controversial and under review for a long
     time.  Still no one could come up with a better solution.
 * stx104
   - add gpio support
 * ti-adc081c
   - Add ACPI device ID matching.
 
 Core changes
 * Refuse to register triggers with duplicate names.  There is no way to
   distinguish between them so this makes no sense.  A few drivers do not
   generate unique names for each instance of the device present.  We can't
   fix this without changing ABI so leave them and wait for someone to
   actually take the rare step of two identical accelerometers on the same
   board.
 * buffer-dma
   - use ARRAY_SIZE in a few appropriate locations.
 
 Tools
 * Fix the fact that the --trigger-num option in generic_buffer didn't allow
   0 which is perfectly valid in the ABI.
 
 Cleanups
 * as3935
   - improve error reporting.
   - remove redundant zeroing of a field in iio_priv.
 * gp2ap020a00f
   - use the iio_device_claim_*_mode helpers rather than open coding locking
   around mode changes.
 * isl29125
   - use the iio_device_claim_*_mode helpers rather than open coding locking.
 * lidar
   - use the iio_device_claim_*_mode helpers rather than open coding locking.
 * mma8452
   - more detail in devices supported description in comments (addresses and
   similar)
 * sca3000
   - add a missing error check.
 * tcs3414
   - use the iio_device_claim_*_mode helpers rather than open coding locking.
 * tcs3472
   - use the iio_device_claim_*_mode helpers rather than open coding locking.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJXdAT2AAoJEFSFNJnE9BaIq68P/3Z0q1lc1cb+K8HV5jgukEKw
 eoxZa5lFIOuHAGeXo9GAdJiH5oT/yAIhadf3gzuuQLaTJwWYKD51aPVwgpT5M2+x
 Bnu2XiYcaoIm/Foat70ycjeYaGxO/xO2vbLp5v0BJV2ujvjm/oCKw5pxYeU4Jm63
 iKaZo9jn/HoshOMpZBrcPZ7Q1TogRdopBNe2fsc8nXFFsv8ODjOZ9Nebs2lk36e+
 PWLUWfSkv2LMBSE2LOFyjSW8E4ItBBngBcyqBTFiiln7mpXU5Vv2QSvUhpP2YjUZ
 rxKvDiG7ADuxMr901whASxyCO180yCxTRIcBsN8oP73gTGHrJnMT0Sptfz7AUUVN
 gJneiy+iy3TecJ/R6w/DnNzqmZMiEVqlYGkdXVGu8SXrKWilvzcTp5iTmDVM5zLb
 1fDZxjbLdNJuHzoSYNiCBcnfzIixOAyKTGFi3jUaPPQ/Lc1qfmgerWWlOzKeUgCZ
 5Bzak8MvWuxcO7jkMG8mbARufy3Nu6eh8a39JXFhViGtTtySydMa8eXdYPjqoAtv
 vgwJNh9U53yYui8i7vU90dM3gJaGg5a4R6EjEKCYcEJf6kM9Go8xCvjU8YWPtIKk
 rfykpPkKcQzbax07YKvb4f015x7r0V6WCGJjPn0Fi14ugNGJJ6M88l+2UcXcx1zS
 RRtVRD49Le7pIDCs1Rqn
 =6Lja
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.8b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second round of new iio device support, features and cleanups in the 4.8 cycle

Firstly some contact detail updates:
* NXP took over freescale. Update the mma8452 header to reflect this.
* Martin Kepplinger email address change in mma8452 header.
* Adriana Reus has changed email address. Update .mailmap.
* Matt Ranostay has changed email address. Update .mailmap.

New Device Support
* max1363
  - add the missing i2c_device_ids for a couple of parts so they can actually
    be used.
* ms5867
  - add device ids for ms5805 and ms5837 parts.

New Features
* ad5755
  - DT support.  This one was a bit controversial and under review for a long
    time.  Still no one could come up with a better solution.
* stx104
  - add gpio support
* ti-adc081c
  - Add ACPI device ID matching.

Core changes
* Refuse to register triggers with duplicate names.  There is no way to
  distinguish between them so this makes no sense.  A few drivers do not
  generate unique names for each instance of the device present.  We can't
  fix this without changing ABI so leave them and wait for someone to
  actually take the rare step of two identical accelerometers on the same
  board.
* buffer-dma
  - use ARRAY_SIZE in a few appropriate locations.

Tools
* Fix the fact that the --trigger-num option in generic_buffer didn't allow
  0 which is perfectly valid in the ABI.

Cleanups
* as3935
  - improve error reporting.
  - remove redundant zeroing of a field in iio_priv.
* gp2ap020a00f
  - use the iio_device_claim_*_mode helpers rather than open coding locking
  around mode changes.
* isl29125
  - use the iio_device_claim_*_mode helpers rather than open coding locking.
* lidar
  - use the iio_device_claim_*_mode helpers rather than open coding locking.
* mma8452
  - more detail in devices supported description in comments (addresses and
  similar)
* sca3000
  - add a missing error check.
* tcs3414
  - use the iio_device_claim_*_mode helpers rather than open coding locking.
* tcs3472
  - use the iio_device_claim_*_mode helpers rather than open coding locking.
2016-06-29 15:35:01 -07:00

269 lines
8.1 KiB
Plaintext
Raw Blame History

#
# DAC drivers
#
# When adding new entries keep the list in alphabetical order
menu "Digital to analog converters"
config AD5064
tristate "Analog Devices AD5064 and similar multi-channel DAC driver"
depends on (SPI_MASTER && I2C!=m) || I2C
help
Say yes here to build support for Analog Devices AD5024, AD5025, AD5044,
AD5045, AD5064, AD5064-1, AD5065, AD5625, AD5625R, AD5627, AD5627R,
AD5628, AD5629R, AD5645R, AD5647R, AD5648, AD5665, AD5665R, AD5666,
AD5667, AD5667R, AD5668, AD5669R, LTC2606, LTC2607, LTC2609, LTC2616,
LTC2617, LTC2619, LTC2626, LTC2627, LTC2629 Digital to Analog Converter.
To compile this driver as a module, choose M here: the
module will be called ad5064.
config AD5360
tristate "Analog Devices AD5360/61/62/63/70/71/73 DAC driver"
depends on SPI
help
Say yes here to build support for Analog Devices AD5360, AD5361,
AD5362, AD5363, AD5370, AD5371, AD5373 multi-channel
Digital to Analog Converters (DAC).
To compile this driver as module choose M here: the module will be called
ad5360.
config AD5380
tristate "Analog Devices AD5380/81/82/83/84/90/91/92 DAC driver"
depends on (SPI_MASTER && I2C!=m) || I2C
select REGMAP_I2C if I2C
select REGMAP_SPI if SPI_MASTER
help
Say yes here to build support for Analog Devices AD5380, AD5381,
AD5382, AD5383, AD5384, AD5390, AD5391, AD5392 multi-channel
Digital to Analog Converters (DAC).
To compile this driver as module choose M here: the module will be called
ad5380.
config AD5421
tristate "Analog Devices AD5421 DAC driver"
depends on SPI
help
Say yes here to build support for Analog Devices AD5421 loop-powered
digital-to-analog convertors (DAC).
To compile this driver as module choose M here: the module will be called
ad5421.
config AD5446
tristate "Analog Devices AD5446 and similar single channel DACs driver"
depends on (SPI_MASTER && I2C!=m) || I2C
help
Say yes here to build support for Analog Devices AD5300, AD5301, AD5310,
AD5311, AD5320, AD5321, AD5444, AD5446, AD5450, AD5451, AD5452, AD5453,
AD5512A, AD5541A, AD5542A, AD5543, AD5553, AD5601, AD5602, AD5611, AD5612,
AD5620, AD5621, AD5622, AD5640, AD5641, AD5660, AD5662 DACs.
To compile this driver as a module, choose M here: the
module will be called ad5446.
config AD5449
tristate "Analog Devices AD5449 and similar DACs driver"
depends on SPI_MASTER
help
Say yes here to build support for Analog Devices AD5415, AD5426, AD5429,
AD5432, AD5439, AD5443, AD5449 Digital to Analog Converters.
To compile this driver as a module, choose M here: the
module will be called ad5449.
config AD5592R_BASE
tristate
config AD5592R
tristate "Analog Devices AD5592R ADC/DAC driver"
depends on SPI_MASTER
select GPIOLIB
select AD5592R_BASE
help
Say yes here to build support for Analog Devices AD5592R
Digital to Analog / Analog to Digital Converter.
To compile this driver as a module, choose M here: the
module will be called ad5592r.
config AD5593R
tristate "Analog Devices AD5593R ADC/DAC driver"
depends on I2C
select GPIOLIB
select AD5592R_BASE
help
Say yes here to build support for Analog Devices AD5593R
Digital to Analog / Analog to Digital Converter.
To compile this driver as a module, choose M here: the
module will be called ad5593r.
config AD5504
tristate "Analog Devices AD5504/AD5501 DAC SPI driver"
depends on SPI
help
Say yes here to build support for Analog Devices AD5504, AD5501,
High Voltage Digital to Analog Converter.
To compile this driver as a module, choose M here: the
module will be called ad5504.
config AD5624R_SPI
tristate "Analog Devices AD5624/44/64R DAC spi driver"
depends on SPI
help
Say yes here to build support for Analog Devices AD5624R, AD5644R and
AD5664R converters (DAC). This driver uses the common SPI interface.
config AD5686
tristate "Analog Devices AD5686R/AD5685R/AD5684R DAC SPI driver"
depends on SPI
help
Say yes here to build support for Analog Devices AD5686R, AD5685R,
AD5684R, AD5791 Voltage Output Digital to
Analog Converter.
To compile this driver as a module, choose M here: the
module will be called ad5686.
config AD5755
tristate "Analog Devices AD5755/AD5755-1/AD5757/AD5735/AD5737 DAC driver"
depends on SPI_MASTER
help
Say yes here to build support for Analog Devices AD5755, AD5755-1,
AD5757, AD5735, AD5737 quad channel Digital to
Analog Converter.
To compile this driver as a module, choose M here: the
module will be called ad5755.
config AD5761
tristate "Analog Devices AD5761/61R/21/21R DAC driver"
depends on SPI_MASTER
help
Say yes here to build support for Analog Devices AD5761, AD5761R, AD5721,
AD5721R Digital to Analog Converter.
To compile this driver as a module, choose M here: the
module will be called ad5761.
config AD5764
tristate "Analog Devices AD5764/64R/44/44R DAC driver"
depends on SPI_MASTER
help
Say yes here to build support for Analog Devices AD5764, AD5764R, AD5744,
AD5744R Digital to Analog Converter.
To compile this driver as a module, choose M here: the
module will be called ad5764.
config AD5791
tristate "Analog Devices AD5760/AD5780/AD5781/AD5790/AD5791 DAC SPI driver"
depends on SPI
help
Say yes here to build support for Analog Devices AD5760, AD5780,
AD5781, AD5790, AD5791 High Resolution Voltage Output Digital to
Analog Converter.
To compile this driver as a module, choose M here: the
module will be called ad5791.
config AD7303
tristate "Analog Devices AD7303 DAC driver"
depends on SPI
help
Say yes here to build support for Analog Devices AD7303 Digital to Analog
Converters (DAC).
To compile this driver as module choose M here: the module will be called
ad7303.
config LPC18XX_DAC
tristate "NXP LPC18xx DAC driver"
depends on ARCH_LPC18XX || COMPILE_TEST
depends on OF && HAS_IOMEM
help
Say yes here to build support for NXP LPC18XX DAC.
To compile this driver as a module, choose M here: the module will be
called lpc18xx_dac.
config M62332
tristate "Mitsubishi M62332 DAC driver"
depends on I2C
help
If you say yes here you get support for the Mitsubishi M62332
(I2C 8-Bit DACs with rail-to-rail outputs).
This driver can also be built as a module. If so, the module
will be called m62332.
config MAX517
tristate "Maxim MAX517/518/519/520/521 DAC driver"
depends on I2C
help
If you say yes here you get support for the following Maxim chips
(I2C 8-Bit DACs with rail-to-rail outputs):
MAX517 - Single channel, single reference
MAX518 - Dual channel, ref=Vdd
MAX519 - Dual channel, dual reference
MAX520 - Quad channel, quad reference
MAX521 - Octal channel, independent ref for ch0-3, shared ref for ch4-7
This driver can also be built as a module. If so, the module
will be called max517.
config MAX5821
tristate "Maxim MAX5821 DAC driver"
depends on I2C
depends on OF
help
Say yes here to build support for Maxim MAX5821
10 bits DAC.
config MCP4725
tristate "MCP4725/6 DAC driver"
depends on I2C
---help---
Say Y here if you want to build a driver for the Microchip
MCP 4725/6 12-bit digital-to-analog converter (DAC) with I2C
interface.
To compile this driver as a module, choose M here: the module
will be called mcp4725.
config MCP4922
tristate "MCP4902, MCP4912, MCP4922 DAC driver"
depends on SPI
help
Say yes here to build the driver for the Microchip MCP4902
MCP4912, and MCP4922 DAC devices.
To compile this driver as a module, choose M here: the module
will be called mcp4922.
config STX104
tristate "Apex Embedded Systems STX104 DAC driver"
depends on X86 && ISA_BUS_API
select GPIOLIB
help
Say yes here to build support for the 2-channel DAC and GPIO on the
Apex Embedded Systems STX104 integrated analog PC/104 card. The base
port addresses for the devices may be configured via the base array
module parameter.
config VF610_DAC
tristate "Vybrid vf610 DAC driver"
depends on OF
depends on HAS_IOMEM
help
Say yes here to support Vybrid board digital-to-analog converter.
This driver can also be built as a module. If so, the module will
be called vf610_dac.
endmenu
View Git Blame Copy Permalink