kernel_optimize_test/drivers/iio/inkern.c
Greg Kroah-Hartman 6e49557b31 First round of IIO new drivers, cleanups and functionality for the 3.20 cycle take 2
Updated pull request with Daniel's fix on top for the power management
 Kconfig changes that had snuck in since last update of the IIO tree
 worked it's way through from mainline.
 
 Original pull message
 
 New device support
 * jsa1212 proxmity / ambient light sensor
 * SM08500 supported added to the kxcjk-1013 accelerometer driver
 * KMX61 Accelerometer/Magnetometer.  This took a somewhat rocky path
   being first merged, then reverted for a rewrite after a discussion of
   how to support additional functionality and finally being merged prior
   to some last reviews coming in, with resultant follow up patches.
 * Freescale mma9551l driver (minor follow up warning supression patch).
 * Semtech SX9500 proximity device driver.
 * ak8975 gains support for ak09911 and ak09912 and drop the standalone driver
   for the ak09911.
 
 New functionality
  * Dummy driver gains some virtual registers making it more flexible.
  * IIO_ACTIVITY channel types, with modifiers running, walking etc.  This is
    to support on chip motion clasifiers.  As such it is in the form of a
    confidence percentage.  The only devices so far only do binary decisions
    but this gives us room when other devices give more nuanced clasification.
  * IIO_EV_DIR_NONE type for events where there is no obvious direction.
    First case is step detection.
  * IIO_STEPS channel type for pedometers.
  * ENABLE mask element used to control turning on counting types such as
    the pedometer that need a 'start point'.
  * INSTANCE event type to support things that happen once.
  * info element for height calibration (used in various motion estimation
    algorithms). Note heigh tof use
  * dummy driver demonstration of the use of all the new bits above.
  * event monitor support for the new events.
  * inv_mpu6050 gains an i2c mux to allow bypassing the device to access
    additional devices connected on the other side of it.  Note that in
    Windows these are handled by firmware on the device and not exposed
    directly.
  * inv_mpu6050 gains ACPI enumeration.
  * inkern interface gains iio_write_channel_raw to allow in kernel users
    of DAC functionality via a simple wrapper.
  * Document input current readings in the ABI docs.
  * Add an error message when we get an out of range error in device tree
    processing for the in kernel interfaces.  Basically a device tree debugging
    aid.
  * Add a sanity check that a scan index for a channel is unique during
    registration.  There to help catch bugs as this should never happen
    in a bug free driver.
 
 Cleanups and fixlets
 
  A rework of buffer registration from Lars - a precursor to some other
  upcoming new stuff (a few patches from others rolled in here as well).
  * Ensure all drivers register the same channels for the device and buffer.
  * Move buffer registration into the core rather than using the old
    two step approach.  Now we have simple ways of using a unified set channels
    for both without requiring channels be exposed by both interface, this
    removes a fair bit of boilerplate.
  * Stop sca3000 and ad5933 (both in staging) enabling buffer channels by
    default. It has long be convention in IIO to startup with no channels
    enabled and leave it up to userspace to say what goes in the buffer.
    Getting rid of these allows us to drop export of iio_scan_mask_set.
  * Drop get_bytes_per_datum from iio_buffer_access_funcs as not been used
    for a while.
  * Allocate standard buffer attributes in the core rather than in every
    driver with a buffer.
  * Make the length attribute read only when a driver is not able to set
    the length.
  * Drop the get_length callback for buffers as it is already available in
    struct iio_buffer.
  * Drop an unused arguement form iio_kfifo_allocate and add devm allocator
    for it.
  * some kconfig entries gain anotation with the resulting module name.
  * Fix a resulting compile issue in dummy driver due to a stub taking
    wrong parameters as a result of the above rework.
  * Fix an off by 2 error in copying the core assigned buffer attributes.
 
 Other cleanups,
  * Trivial space before comma fixups.
  * ak8975 fixlets - none critical.  Rework to allow more device support.
  * Drop unnecessary sizeof(u8) calls.
  * bmp280 - refactor the compensation code to reduce copy operations and
    code length.  A second patch futher optimized this and performed some
    other minor cleanups.
  * kxcjk-1013 - various power control cleanups to avoid unnecessary enable
    / disable of device.  Make sure it is only controlled at all if CONFIG_PM
    is enabled.  Also som cleanups of error paths.
  * Small cleanups in adf4530 driver - pointless message and unnecessary braces.
  * Clarifiy the proximity ABI docs to make it clear it should get bigger
    as we move futher away.
  * Drop a misleading comment form industrialio-core.c
  * Trivial white space cleanups.
  * sca3000 looses an unused debug function.
  * Fix char unsigned ordering in ad8366
  * Increase the sleep time in ad9523 to make it predictable (value didn't
    really matter so make it more than 20 msecs)
  * mxs-lradc touchscreen property cleanups in device tree are fixed to ensure
    the meet all the 'interesting' documentation.
  * A couple of cleanups for the staging ad5933 driver to avoid unnecessary
    conversion to a processed temperature vlaue in kernel and remove
    platform data form the state structure as not needed after probe.
  * Fix a wrong scale factor in the docs.
 
 Misc
  * Add IIO include files to the maintainers entry.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJUvtDlAAoJEFSFNJnE9BaIaNMQAI9ZYOrOmvSpxPV4ab71it9z
 gi03VG8+iJl0dPgwcSHeFZvSDiNAOWSX/XdWLoxFAdpjpsnytIp01s9+c3ogz58j
 pYbjxuOT2Qcf+36REuaFkQPFV2ppXMvwDwFUUNeFVupu+bVUKeZuNafBDp00aN1c
 o4MPDwoS1EcTHL+77iCg06exL8LozOwLabfUTRVIRkhIqikemghcmubQHH06m+dk
 EMddtNcXTVR4cJLX076nkKsNDHgmfoBYL9Hy/OvQbjWYAxoZg+q90ZX8yCy0Z5oW
 otChj5XpoYRIa7X6xvP5kTebD4iiR/COWer83EyqFosXhmQ/27rWasST42j1K3q/
 mU40skbscDef4F6COMlgBtVh1FhKUm9AHPAGk5swW792Qjpd4xdt+GShU5bJCa4O
 OOZYk8ulraELeWVz2IK+CrOvJYeTSrNQR6VA6sBjWRHeqxtB0yOJkhxX9NUcSIgJ
 GwM8qNTrQUkvI7OGvFGvf8hp9cboJTKEfzC+yspj+OJSjgJgNWw2pOjzJjsexxaL
 nT2rKhPg46hC+FR4IvPPjhGihCtMSgBWkwbHSeXH+TgRfbbTUh6y6sqEUZraVhnQ
 LKde54G0aH1XBFIM6fwWIPgdWBWsI3b3pFuBRMzhORdcCuAUOvDSyc5hVcaA8qb5
 UZghapUruB556xjoMV3n
 =LlJD
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-3.20a_take2' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-testing

Jonathan writes:

First round of IIO new drivers, cleanups and functionality for the 3.20 cycle take 2

Updated pull request with Daniel's fix on top for the power management
Kconfig changes that had snuck in since last update of the IIO tree
worked it's way through from mainline.

Original pull message

New device support
* jsa1212 proxmity / ambient light sensor
* SM08500 supported added to the kxcjk-1013 accelerometer driver
* KMX61 Accelerometer/Magnetometer.  This took a somewhat rocky path
  being first merged, then reverted for a rewrite after a discussion of
  how to support additional functionality and finally being merged prior
  to some last reviews coming in, with resultant follow up patches.
* Freescale mma9551l driver (minor follow up warning supression patch).
* Semtech SX9500 proximity device driver.
* ak8975 gains support for ak09911 and ak09912 and drop the standalone driver
  for the ak09911.

New functionality
 * Dummy driver gains some virtual registers making it more flexible.
 * IIO_ACTIVITY channel types, with modifiers running, walking etc.  This is
   to support on chip motion clasifiers.  As such it is in the form of a
   confidence percentage.  The only devices so far only do binary decisions
   but this gives us room when other devices give more nuanced clasification.
 * IIO_EV_DIR_NONE type for events where there is no obvious direction.
   First case is step detection.
 * IIO_STEPS channel type for pedometers.
 * ENABLE mask element used to control turning on counting types such as
   the pedometer that need a 'start point'.
 * INSTANCE event type to support things that happen once.
 * info element for height calibration (used in various motion estimation
   algorithms). Note heigh tof use
 * dummy driver demonstration of the use of all the new bits above.
 * event monitor support for the new events.
 * inv_mpu6050 gains an i2c mux to allow bypassing the device to access
   additional devices connected on the other side of it.  Note that in
   Windows these are handled by firmware on the device and not exposed
   directly.
 * inv_mpu6050 gains ACPI enumeration.
 * inkern interface gains iio_write_channel_raw to allow in kernel users
   of DAC functionality via a simple wrapper.
 * Document input current readings in the ABI docs.
 * Add an error message when we get an out of range error in device tree
   processing for the in kernel interfaces.  Basically a device tree debugging
   aid.
 * Add a sanity check that a scan index for a channel is unique during
   registration.  There to help catch bugs as this should never happen
   in a bug free driver.

Cleanups and fixlets

 A rework of buffer registration from Lars - a precursor to some other
 upcoming new stuff (a few patches from others rolled in here as well).
 * Ensure all drivers register the same channels for the device and buffer.
 * Move buffer registration into the core rather than using the old
   two step approach.  Now we have simple ways of using a unified set channels
   for both without requiring channels be exposed by both interface, this
   removes a fair bit of boilerplate.
 * Stop sca3000 and ad5933 (both in staging) enabling buffer channels by
   default. It has long be convention in IIO to startup with no channels
   enabled and leave it up to userspace to say what goes in the buffer.
   Getting rid of these allows us to drop export of iio_scan_mask_set.
 * Drop get_bytes_per_datum from iio_buffer_access_funcs as not been used
   for a while.
 * Allocate standard buffer attributes in the core rather than in every
   driver with a buffer.
 * Make the length attribute read only when a driver is not able to set
   the length.
 * Drop the get_length callback for buffers as it is already available in
   struct iio_buffer.
 * Drop an unused arguement form iio_kfifo_allocate and add devm allocator
   for it.
 * some kconfig entries gain anotation with the resulting module name.
 * Fix a resulting compile issue in dummy driver due to a stub taking
   wrong parameters as a result of the above rework.
 * Fix an off by 2 error in copying the core assigned buffer attributes.

Other cleanups,
 * Trivial space before comma fixups.
 * ak8975 fixlets - none critical.  Rework to allow more device support.
 * Drop unnecessary sizeof(u8) calls.
 * bmp280 - refactor the compensation code to reduce copy operations and
   code length.  A second patch futher optimized this and performed some
   other minor cleanups.
 * kxcjk-1013 - various power control cleanups to avoid unnecessary enable
   / disable of device.  Make sure it is only controlled at all if CONFIG_PM
   is enabled.  Also som cleanups of error paths.
 * Small cleanups in adf4530 driver - pointless message and unnecessary braces.
 * Clarifiy the proximity ABI docs to make it clear it should get bigger
   as we move futher away.
 * Drop a misleading comment form industrialio-core.c
 * Trivial white space cleanups.
 * sca3000 looses an unused debug function.
 * Fix char unsigned ordering in ad8366
 * Increase the sleep time in ad9523 to make it predictable (value didn't
   really matter so make it more than 20 msecs)
 * mxs-lradc touchscreen property cleanups in device tree are fixed to ensure
   the meet all the 'interesting' documentation.
 * A couple of cleanups for the staging ad5933 driver to avoid unnecessary
   conversion to a processed temperature vlaue in kernel and remove
   platform data form the state structure as not needed after probe.
 * Fix a wrong scale factor in the docs.

Misc
 * Add IIO include files to the maintainers entry.
2015-01-21 10:13:37 +08:00

665 lines
15 KiB
C

/* The industrial I/O core in kernel channel mapping
*
* Copyright (c) 2011 Jonathan Cameron
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#include <linux/err.h>
#include <linux/export.h>
#include <linux/slab.h>
#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/iio/iio.h>
#include "iio_core.h"
#include <linux/iio/machine.h>
#include <linux/iio/driver.h>
#include <linux/iio/consumer.h>
struct iio_map_internal {
struct iio_dev *indio_dev;
struct iio_map *map;
struct list_head l;
};
static LIST_HEAD(iio_map_list);
static DEFINE_MUTEX(iio_map_list_lock);
int iio_map_array_register(struct iio_dev *indio_dev, struct iio_map *maps)
{
int i = 0, ret = 0;
struct iio_map_internal *mapi;
if (maps == NULL)
return 0;
mutex_lock(&iio_map_list_lock);
while (maps[i].consumer_dev_name != NULL) {
mapi = kzalloc(sizeof(*mapi), GFP_KERNEL);
if (mapi == NULL) {
ret = -ENOMEM;
goto error_ret;
}
mapi->map = &maps[i];
mapi->indio_dev = indio_dev;
list_add(&mapi->l, &iio_map_list);
i++;
}
error_ret:
mutex_unlock(&iio_map_list_lock);
return ret;
}
EXPORT_SYMBOL_GPL(iio_map_array_register);
/*
* Remove all map entries associated with the given iio device
*/
int iio_map_array_unregister(struct iio_dev *indio_dev)
{
int ret = -ENODEV;
struct iio_map_internal *mapi;
struct list_head *pos, *tmp;
mutex_lock(&iio_map_list_lock);
list_for_each_safe(pos, tmp, &iio_map_list) {
mapi = list_entry(pos, struct iio_map_internal, l);
if (indio_dev == mapi->indio_dev) {
list_del(&mapi->l);
kfree(mapi);
ret = 0;
}
}
mutex_unlock(&iio_map_list_lock);
return ret;
}
EXPORT_SYMBOL_GPL(iio_map_array_unregister);
static const struct iio_chan_spec
*iio_chan_spec_from_name(const struct iio_dev *indio_dev, const char *name)
{
int i;
const struct iio_chan_spec *chan = NULL;
for (i = 0; i < indio_dev->num_channels; i++)
if (indio_dev->channels[i].datasheet_name &&
strcmp(name, indio_dev->channels[i].datasheet_name) == 0) {
chan = &indio_dev->channels[i];
break;
}
return chan;
}
#ifdef CONFIG_OF
static int iio_dev_node_match(struct device *dev, void *data)
{
return dev->of_node == data && dev->type == &iio_device_type;
}
/**
* __of_iio_simple_xlate - translate iiospec to the IIO channel index
* @indio_dev: pointer to the iio_dev structure
* @iiospec: IIO specifier as found in the device tree
*
* This is simple translation function, suitable for the most 1:1 mapped
* channels in IIO chips. This function performs only one sanity check:
* whether IIO index is less than num_channels (that is specified in the
* iio_dev).
*/
static int __of_iio_simple_xlate(struct iio_dev *indio_dev,
const struct of_phandle_args *iiospec)
{
if (!iiospec->args_count)
return 0;
if (iiospec->args[0] >= indio_dev->num_channels) {
dev_err(&indio_dev->dev, "invalid channel index %u\n",
iiospec->args[0]);
return -EINVAL;
}
return iiospec->args[0];
}
static int __of_iio_channel_get(struct iio_channel *channel,
struct device_node *np, int index)
{
struct device *idev;
struct iio_dev *indio_dev;
int err;
struct of_phandle_args iiospec;
err = of_parse_phandle_with_args(np, "io-channels",
"#io-channel-cells",
index, &iiospec);
if (err)
return err;
idev = bus_find_device(&iio_bus_type, NULL, iiospec.np,
iio_dev_node_match);
of_node_put(iiospec.np);
if (idev == NULL)
return -EPROBE_DEFER;
indio_dev = dev_to_iio_dev(idev);
channel->indio_dev = indio_dev;
if (indio_dev->info->of_xlate)
index = indio_dev->info->of_xlate(indio_dev, &iiospec);
else
index = __of_iio_simple_xlate(indio_dev, &iiospec);
if (index < 0)
goto err_put;
channel->channel = &indio_dev->channels[index];
return 0;
err_put:
iio_device_put(indio_dev);
return index;
}
static struct iio_channel *of_iio_channel_get(struct device_node *np, int index)
{
struct iio_channel *channel;
int err;
if (index < 0)
return ERR_PTR(-EINVAL);
channel = kzalloc(sizeof(*channel), GFP_KERNEL);
if (channel == NULL)
return ERR_PTR(-ENOMEM);
err = __of_iio_channel_get(channel, np, index);
if (err)
goto err_free_channel;
return channel;
err_free_channel:
kfree(channel);
return ERR_PTR(err);
}
static struct iio_channel *of_iio_channel_get_by_name(struct device_node *np,
const char *name)
{
struct iio_channel *chan = NULL;
/* Walk up the tree of devices looking for a matching iio channel */
while (np) {
int index = 0;
/*
* For named iio channels, first look up the name in the
* "io-channel-names" property. If it cannot be found, the
* index will be an error code, and of_iio_channel_get()
* will fail.
*/
if (name)
index = of_property_match_string(np, "io-channel-names",
name);
chan = of_iio_channel_get(np, index);
if (!IS_ERR(chan) || PTR_ERR(chan) == -EPROBE_DEFER)
break;
else if (name && index >= 0) {
pr_err("ERROR: could not get IIO channel %s:%s(%i)\n",
np->full_name, name ? name : "", index);
return NULL;
}
/*
* No matching IIO channel found on this node.
* If the parent node has a "io-channel-ranges" property,
* then we can try one of its channels.
*/
np = np->parent;
if (np && !of_get_property(np, "io-channel-ranges", NULL))
return NULL;
}
return chan;
}
static struct iio_channel *of_iio_channel_get_all(struct device *dev)
{
struct iio_channel *chans;
int i, mapind, nummaps = 0;
int ret;
do {
ret = of_parse_phandle_with_args(dev->of_node,
"io-channels",
"#io-channel-cells",
nummaps, NULL);
if (ret < 0)
break;
} while (++nummaps);
if (nummaps == 0) /* no error, return NULL to search map table */
return NULL;
/* NULL terminated array to save passing size */
chans = kcalloc(nummaps + 1, sizeof(*chans), GFP_KERNEL);
if (chans == NULL)
return ERR_PTR(-ENOMEM);
/* Search for OF matches */
for (mapind = 0; mapind < nummaps; mapind++) {
ret = __of_iio_channel_get(&chans[mapind], dev->of_node,
mapind);
if (ret)
goto error_free_chans;
}
return chans;
error_free_chans:
for (i = 0; i < mapind; i++)
iio_device_put(chans[i].indio_dev);
kfree(chans);
return ERR_PTR(ret);
}
#else /* CONFIG_OF */
static inline struct iio_channel *
of_iio_channel_get_by_name(struct device_node *np, const char *name)
{
return NULL;
}
static inline struct iio_channel *of_iio_channel_get_all(struct device *dev)
{
return NULL;
}
#endif /* CONFIG_OF */
static struct iio_channel *iio_channel_get_sys(const char *name,
const char *channel_name)
{
struct iio_map_internal *c_i = NULL, *c = NULL;
struct iio_channel *channel;
int err;
if (name == NULL && channel_name == NULL)
return ERR_PTR(-ENODEV);
/* first find matching entry the channel map */
mutex_lock(&iio_map_list_lock);
list_for_each_entry(c_i, &iio_map_list, l) {
if ((name && strcmp(name, c_i->map->consumer_dev_name) != 0) ||
(channel_name &&
strcmp(channel_name, c_i->map->consumer_channel) != 0))
continue;
c = c_i;
iio_device_get(c->indio_dev);
break;
}
mutex_unlock(&iio_map_list_lock);
if (c == NULL)
return ERR_PTR(-ENODEV);
channel = kzalloc(sizeof(*channel), GFP_KERNEL);
if (channel == NULL) {
err = -ENOMEM;
goto error_no_mem;
}
channel->indio_dev = c->indio_dev;
if (c->map->adc_channel_label) {
channel->channel =
iio_chan_spec_from_name(channel->indio_dev,
c->map->adc_channel_label);
if (channel->channel == NULL) {
err = -EINVAL;
goto error_no_chan;
}
}
return channel;
error_no_chan:
kfree(channel);
error_no_mem:
iio_device_put(c->indio_dev);
return ERR_PTR(err);
}
struct iio_channel *iio_channel_get(struct device *dev,
const char *channel_name)
{
const char *name = dev ? dev_name(dev) : NULL;
struct iio_channel *channel;
if (dev) {
channel = of_iio_channel_get_by_name(dev->of_node,
channel_name);
if (channel != NULL)
return channel;
}
return iio_channel_get_sys(name, channel_name);
}
EXPORT_SYMBOL_GPL(iio_channel_get);
void iio_channel_release(struct iio_channel *channel)
{
iio_device_put(channel->indio_dev);
kfree(channel);
}
EXPORT_SYMBOL_GPL(iio_channel_release);
struct iio_channel *iio_channel_get_all(struct device *dev)
{
const char *name;
struct iio_channel *chans;
struct iio_map_internal *c = NULL;
int nummaps = 0;
int mapind = 0;
int i, ret;
if (dev == NULL)
return ERR_PTR(-EINVAL);
chans = of_iio_channel_get_all(dev);
if (chans)
return chans;
name = dev_name(dev);
mutex_lock(&iio_map_list_lock);
/* first count the matching maps */
list_for_each_entry(c, &iio_map_list, l)
if (name && strcmp(name, c->map->consumer_dev_name) != 0)
continue;
else
nummaps++;
if (nummaps == 0) {
ret = -ENODEV;
goto error_ret;
}
/* NULL terminated array to save passing size */
chans = kzalloc(sizeof(*chans)*(nummaps + 1), GFP_KERNEL);
if (chans == NULL) {
ret = -ENOMEM;
goto error_ret;
}
/* for each map fill in the chans element */
list_for_each_entry(c, &iio_map_list, l) {
if (name && strcmp(name, c->map->consumer_dev_name) != 0)
continue;
chans[mapind].indio_dev = c->indio_dev;
chans[mapind].data = c->map->consumer_data;
chans[mapind].channel =
iio_chan_spec_from_name(chans[mapind].indio_dev,
c->map->adc_channel_label);
if (chans[mapind].channel == NULL) {
ret = -EINVAL;
goto error_free_chans;
}
iio_device_get(chans[mapind].indio_dev);
mapind++;
}
if (mapind == 0) {
ret = -ENODEV;
goto error_free_chans;
}
mutex_unlock(&iio_map_list_lock);
return chans;
error_free_chans:
for (i = 0; i < nummaps; i++)
iio_device_put(chans[i].indio_dev);
kfree(chans);
error_ret:
mutex_unlock(&iio_map_list_lock);
return ERR_PTR(ret);
}
EXPORT_SYMBOL_GPL(iio_channel_get_all);
void iio_channel_release_all(struct iio_channel *channels)
{
struct iio_channel *chan = &channels[0];
while (chan->indio_dev) {
iio_device_put(chan->indio_dev);
chan++;
}
kfree(channels);
}
EXPORT_SYMBOL_GPL(iio_channel_release_all);
static int iio_channel_read(struct iio_channel *chan, int *val, int *val2,
enum iio_chan_info_enum info)
{
int unused;
int vals[INDIO_MAX_RAW_ELEMENTS];
int ret;
int val_len = 2;
if (val2 == NULL)
val2 = &unused;
if(!iio_channel_has_info(chan->channel, info))
return -EINVAL;
if (chan->indio_dev->info->read_raw_multi) {
ret = chan->indio_dev->info->read_raw_multi(chan->indio_dev,
chan->channel, INDIO_MAX_RAW_ELEMENTS,
vals, &val_len, info);
*val = vals[0];
*val2 = vals[1];
} else
ret = chan->indio_dev->info->read_raw(chan->indio_dev,
chan->channel, val, val2, info);
return ret;
}
int iio_read_channel_raw(struct iio_channel *chan, int *val)
{
int ret;
mutex_lock(&chan->indio_dev->info_exist_lock);
if (chan->indio_dev->info == NULL) {
ret = -ENODEV;
goto err_unlock;
}
ret = iio_channel_read(chan, val, NULL, IIO_CHAN_INFO_RAW);
err_unlock:
mutex_unlock(&chan->indio_dev->info_exist_lock);
return ret;
}
EXPORT_SYMBOL_GPL(iio_read_channel_raw);
int iio_read_channel_average_raw(struct iio_channel *chan, int *val)
{
int ret;
mutex_lock(&chan->indio_dev->info_exist_lock);
if (chan->indio_dev->info == NULL) {
ret = -ENODEV;
goto err_unlock;
}
ret = iio_channel_read(chan, val, NULL, IIO_CHAN_INFO_AVERAGE_RAW);
err_unlock:
mutex_unlock(&chan->indio_dev->info_exist_lock);
return ret;
}
EXPORT_SYMBOL_GPL(iio_read_channel_average_raw);
static int iio_convert_raw_to_processed_unlocked(struct iio_channel *chan,
int raw, int *processed, unsigned int scale)
{
int scale_type, scale_val, scale_val2, offset;
s64 raw64 = raw;
int ret;
ret = iio_channel_read(chan, &offset, NULL, IIO_CHAN_INFO_OFFSET);
if (ret >= 0)
raw64 += offset;
scale_type = iio_channel_read(chan, &scale_val, &scale_val2,
IIO_CHAN_INFO_SCALE);
if (scale_type < 0)
return scale_type;
switch (scale_type) {
case IIO_VAL_INT:
*processed = raw64 * scale_val;
break;
case IIO_VAL_INT_PLUS_MICRO:
if (scale_val2 < 0)
*processed = -raw64 * scale_val;
else
*processed = raw64 * scale_val;
*processed += div_s64(raw64 * (s64)scale_val2 * scale,
1000000LL);
break;
case IIO_VAL_INT_PLUS_NANO:
if (scale_val2 < 0)
*processed = -raw64 * scale_val;
else
*processed = raw64 * scale_val;
*processed += div_s64(raw64 * (s64)scale_val2 * scale,
1000000000LL);
break;
case IIO_VAL_FRACTIONAL:
*processed = div_s64(raw64 * (s64)scale_val * scale,
scale_val2);
break;
case IIO_VAL_FRACTIONAL_LOG2:
*processed = (raw64 * (s64)scale_val * scale) >> scale_val2;
break;
default:
return -EINVAL;
}
return 0;
}
int iio_convert_raw_to_processed(struct iio_channel *chan, int raw,
int *processed, unsigned int scale)
{
int ret;
mutex_lock(&chan->indio_dev->info_exist_lock);
if (chan->indio_dev->info == NULL) {
ret = -ENODEV;
goto err_unlock;
}
ret = iio_convert_raw_to_processed_unlocked(chan, raw, processed,
scale);
err_unlock:
mutex_unlock(&chan->indio_dev->info_exist_lock);
return ret;
}
EXPORT_SYMBOL_GPL(iio_convert_raw_to_processed);
int iio_read_channel_processed(struct iio_channel *chan, int *val)
{
int ret;
mutex_lock(&chan->indio_dev->info_exist_lock);
if (chan->indio_dev->info == NULL) {
ret = -ENODEV;
goto err_unlock;
}
if (iio_channel_has_info(chan->channel, IIO_CHAN_INFO_PROCESSED)) {
ret = iio_channel_read(chan, val, NULL,
IIO_CHAN_INFO_PROCESSED);
} else {
ret = iio_channel_read(chan, val, NULL, IIO_CHAN_INFO_RAW);
if (ret < 0)
goto err_unlock;
ret = iio_convert_raw_to_processed_unlocked(chan, *val, val, 1);
}
err_unlock:
mutex_unlock(&chan->indio_dev->info_exist_lock);
return ret;
}
EXPORT_SYMBOL_GPL(iio_read_channel_processed);
int iio_read_channel_scale(struct iio_channel *chan, int *val, int *val2)
{
int ret;
mutex_lock(&chan->indio_dev->info_exist_lock);
if (chan->indio_dev->info == NULL) {
ret = -ENODEV;
goto err_unlock;
}
ret = iio_channel_read(chan, val, val2, IIO_CHAN_INFO_SCALE);
err_unlock:
mutex_unlock(&chan->indio_dev->info_exist_lock);
return ret;
}
EXPORT_SYMBOL_GPL(iio_read_channel_scale);
int iio_get_channel_type(struct iio_channel *chan, enum iio_chan_type *type)
{
int ret = 0;
/* Need to verify underlying driver has not gone away */
mutex_lock(&chan->indio_dev->info_exist_lock);
if (chan->indio_dev->info == NULL) {
ret = -ENODEV;
goto err_unlock;
}
*type = chan->channel->type;
err_unlock:
mutex_unlock(&chan->indio_dev->info_exist_lock);
return ret;
}
EXPORT_SYMBOL_GPL(iio_get_channel_type);
static int iio_channel_write(struct iio_channel *chan, int val, int val2,
enum iio_chan_info_enum info)
{
return chan->indio_dev->info->write_raw(chan->indio_dev,
chan->channel, val, val2, info);
}
int iio_write_channel_raw(struct iio_channel *chan, int val)
{
int ret;
mutex_lock(&chan->indio_dev->info_exist_lock);
if (chan->indio_dev->info == NULL) {
ret = -ENODEV;
goto err_unlock;
}
ret = iio_channel_write(chan, val, 0, IIO_CHAN_INFO_RAW);
err_unlock:
mutex_unlock(&chan->indio_dev->info_exist_lock);
return ret;
}
EXPORT_SYMBOL_GPL(iio_write_channel_raw);