forked from luck/tmp_suning_uos_patched
528222d853
rc-core kapi uses nanoseconds for infrared durations for receiving, and microseconds for sending. The uapi already uses microseconds for both, so this patch does not change the uapi. Infrared durations do not need nanosecond resolution. IR protocols do not have durations shorter than about 100 microseconds. Some IR hardware offers 250 microseconds resolution, which is sufficient for most protocols. Better hardware has 50 microsecond resolution and is enough for every protocol I am aware off. Unify on microseconds everywhere. This simplifies the code since less conversion between microseconds and nanoseconds needs to be done. This affects: - rx_resolution member of struct rc_dev - timeout member of struct rc_dev - duration member in struct ir_raw_event Cc: "Bruno Prémont" <bonbons@linux-vserver.org> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Patrick Lerda <patrick9876@free.fr> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: "David Härdeman" <david@hardeman.nu> Cc: Benjamin Valentin <benpicco@googlemail.com> Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
244 lines
6.2 KiB
C
244 lines
6.2 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Driver for Amlogic Meson IR remote receiver
|
|
*
|
|
* Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com>
|
|
*/
|
|
|
|
#include <linux/device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/bitfield.h>
|
|
|
|
#include <media/rc-core.h>
|
|
|
|
#define DRIVER_NAME "meson-ir"
|
|
|
|
/* valid on all Meson platforms */
|
|
#define IR_DEC_LDR_ACTIVE 0x00
|
|
#define IR_DEC_LDR_IDLE 0x04
|
|
#define IR_DEC_LDR_REPEAT 0x08
|
|
#define IR_DEC_BIT_0 0x0c
|
|
#define IR_DEC_REG0 0x10
|
|
#define IR_DEC_FRAME 0x14
|
|
#define IR_DEC_STATUS 0x18
|
|
#define IR_DEC_REG1 0x1c
|
|
/* only available on Meson 8b and newer */
|
|
#define IR_DEC_REG2 0x20
|
|
|
|
#define REG0_RATE_MASK GENMASK(11, 0)
|
|
|
|
#define DECODE_MODE_NEC 0x0
|
|
#define DECODE_MODE_RAW 0x2
|
|
|
|
/* Meson 6b uses REG1 to configure the mode */
|
|
#define REG1_MODE_MASK GENMASK(8, 7)
|
|
#define REG1_MODE_SHIFT 7
|
|
|
|
/* Meson 8b / GXBB use REG2 to configure the mode */
|
|
#define REG2_MODE_MASK GENMASK(3, 0)
|
|
#define REG2_MODE_SHIFT 0
|
|
|
|
#define REG1_TIME_IV_MASK GENMASK(28, 16)
|
|
|
|
#define REG1_IRQSEL_MASK GENMASK(3, 2)
|
|
#define REG1_IRQSEL_NEC_MODE 0
|
|
#define REG1_IRQSEL_RISE_FALL 1
|
|
#define REG1_IRQSEL_FALL 2
|
|
#define REG1_IRQSEL_RISE 3
|
|
|
|
#define REG1_RESET BIT(0)
|
|
#define REG1_ENABLE BIT(15)
|
|
|
|
#define STATUS_IR_DEC_IN BIT(8)
|
|
|
|
#define MESON_TRATE 10 /* us */
|
|
|
|
struct meson_ir {
|
|
void __iomem *reg;
|
|
struct rc_dev *rc;
|
|
spinlock_t lock;
|
|
};
|
|
|
|
static void meson_ir_set_mask(struct meson_ir *ir, unsigned int reg,
|
|
u32 mask, u32 value)
|
|
{
|
|
u32 data;
|
|
|
|
data = readl(ir->reg + reg);
|
|
data &= ~mask;
|
|
data |= (value & mask);
|
|
writel(data, ir->reg + reg);
|
|
}
|
|
|
|
static irqreturn_t meson_ir_irq(int irqno, void *dev_id)
|
|
{
|
|
struct meson_ir *ir = dev_id;
|
|
u32 duration, status;
|
|
struct ir_raw_event rawir = {};
|
|
|
|
spin_lock(&ir->lock);
|
|
|
|
duration = readl_relaxed(ir->reg + IR_DEC_REG1);
|
|
duration = FIELD_GET(REG1_TIME_IV_MASK, duration);
|
|
rawir.duration = duration * MESON_TRATE;
|
|
|
|
status = readl_relaxed(ir->reg + IR_DEC_STATUS);
|
|
rawir.pulse = !!(status & STATUS_IR_DEC_IN);
|
|
|
|
ir_raw_event_store_with_timeout(ir->rc, &rawir);
|
|
|
|
spin_unlock(&ir->lock);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int meson_ir_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *node = dev->of_node;
|
|
struct resource *res;
|
|
const char *map_name;
|
|
struct meson_ir *ir;
|
|
int irq, ret;
|
|
|
|
ir = devm_kzalloc(dev, sizeof(struct meson_ir), GFP_KERNEL);
|
|
if (!ir)
|
|
return -ENOMEM;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
ir->reg = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(ir->reg))
|
|
return PTR_ERR(ir->reg);
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
ir->rc = devm_rc_allocate_device(dev, RC_DRIVER_IR_RAW);
|
|
if (!ir->rc) {
|
|
dev_err(dev, "failed to allocate rc device\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
ir->rc->priv = ir;
|
|
ir->rc->device_name = DRIVER_NAME;
|
|
ir->rc->input_phys = DRIVER_NAME "/input0";
|
|
ir->rc->input_id.bustype = BUS_HOST;
|
|
map_name = of_get_property(node, "linux,rc-map-name", NULL);
|
|
ir->rc->map_name = map_name ? map_name : RC_MAP_EMPTY;
|
|
ir->rc->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;
|
|
ir->rc->rx_resolution = MESON_TRATE;
|
|
ir->rc->min_timeout = 1;
|
|
ir->rc->timeout = IR_DEFAULT_TIMEOUT;
|
|
ir->rc->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
|
|
ir->rc->driver_name = DRIVER_NAME;
|
|
|
|
spin_lock_init(&ir->lock);
|
|
platform_set_drvdata(pdev, ir);
|
|
|
|
ret = devm_rc_register_device(dev, ir->rc);
|
|
if (ret) {
|
|
dev_err(dev, "failed to register rc device\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = devm_request_irq(dev, irq, meson_ir_irq, 0, NULL, ir);
|
|
if (ret) {
|
|
dev_err(dev, "failed to request irq\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Reset the decoder */
|
|
meson_ir_set_mask(ir, IR_DEC_REG1, REG1_RESET, REG1_RESET);
|
|
meson_ir_set_mask(ir, IR_DEC_REG1, REG1_RESET, 0);
|
|
|
|
/* Set general operation mode (= raw/software decoding) */
|
|
if (of_device_is_compatible(node, "amlogic,meson6-ir"))
|
|
meson_ir_set_mask(ir, IR_DEC_REG1, REG1_MODE_MASK,
|
|
FIELD_PREP(REG1_MODE_MASK, DECODE_MODE_RAW));
|
|
else
|
|
meson_ir_set_mask(ir, IR_DEC_REG2, REG2_MODE_MASK,
|
|
FIELD_PREP(REG2_MODE_MASK, DECODE_MODE_RAW));
|
|
|
|
/* Set rate */
|
|
meson_ir_set_mask(ir, IR_DEC_REG0, REG0_RATE_MASK, MESON_TRATE - 1);
|
|
/* IRQ on rising and falling edges */
|
|
meson_ir_set_mask(ir, IR_DEC_REG1, REG1_IRQSEL_MASK,
|
|
FIELD_PREP(REG1_IRQSEL_MASK, REG1_IRQSEL_RISE_FALL));
|
|
/* Enable the decoder */
|
|
meson_ir_set_mask(ir, IR_DEC_REG1, REG1_ENABLE, REG1_ENABLE);
|
|
|
|
dev_info(dev, "receiver initialized\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int meson_ir_remove(struct platform_device *pdev)
|
|
{
|
|
struct meson_ir *ir = platform_get_drvdata(pdev);
|
|
unsigned long flags;
|
|
|
|
/* Disable the decoder */
|
|
spin_lock_irqsave(&ir->lock, flags);
|
|
meson_ir_set_mask(ir, IR_DEC_REG1, REG1_ENABLE, 0);
|
|
spin_unlock_irqrestore(&ir->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void meson_ir_shutdown(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *node = dev->of_node;
|
|
struct meson_ir *ir = platform_get_drvdata(pdev);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&ir->lock, flags);
|
|
|
|
/*
|
|
* Set operation mode to NEC/hardware decoding to give
|
|
* bootloader a chance to power the system back on
|
|
*/
|
|
if (of_device_is_compatible(node, "amlogic,meson6-ir"))
|
|
meson_ir_set_mask(ir, IR_DEC_REG1, REG1_MODE_MASK,
|
|
DECODE_MODE_NEC << REG1_MODE_SHIFT);
|
|
else
|
|
meson_ir_set_mask(ir, IR_DEC_REG2, REG2_MODE_MASK,
|
|
DECODE_MODE_NEC << REG2_MODE_SHIFT);
|
|
|
|
/* Set rate to default value */
|
|
meson_ir_set_mask(ir, IR_DEC_REG0, REG0_RATE_MASK, 0x13);
|
|
|
|
spin_unlock_irqrestore(&ir->lock, flags);
|
|
}
|
|
|
|
static const struct of_device_id meson_ir_match[] = {
|
|
{ .compatible = "amlogic,meson6-ir" },
|
|
{ .compatible = "amlogic,meson8b-ir" },
|
|
{ .compatible = "amlogic,meson-gxbb-ir" },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, meson_ir_match);
|
|
|
|
static struct platform_driver meson_ir_driver = {
|
|
.probe = meson_ir_probe,
|
|
.remove = meson_ir_remove,
|
|
.shutdown = meson_ir_shutdown,
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.of_match_table = meson_ir_match,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(meson_ir_driver);
|
|
|
|
MODULE_DESCRIPTION("Amlogic Meson IR remote receiver driver");
|
|
MODULE_AUTHOR("Beniamino Galvani <b.galvani@gmail.com>");
|
|
MODULE_LICENSE("GPL v2");
|