forked from luck/tmp_suning_uos_patched
dda1bb4e97
Use codespell to fix lots of typos over frontends. Manually verified to avoid false-positives. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2385 lines
55 KiB
C
2385 lines
55 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
// Rafael Micro R820T driver
|
|
//
|
|
// Copyright (C) 2013 Mauro Carvalho Chehab
|
|
//
|
|
// This driver was written from scratch, based on an existing driver
|
|
// that it is part of rtl-sdr git tree, released under GPLv2:
|
|
// https://groups.google.com/forum/#!topic/ultra-cheap-sdr/Y3rBEOFtHug
|
|
// https://github.com/n1gp/gr-baz
|
|
//
|
|
// From what I understood from the threads, the original driver was converted
|
|
// to userspace from a Realtek tree. I couldn't find the original tree.
|
|
// However, the original driver look awkward on my eyes. So, I decided to
|
|
// write a new version from it from the scratch, while trying to reproduce
|
|
// everything found there.
|
|
//
|
|
// TODO:
|
|
// After locking, the original driver seems to have some routines to
|
|
// improve reception. This was not implemented here yet.
|
|
//
|
|
// RF Gain set/get is not implemented.
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/videodev2.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/bitrev.h>
|
|
|
|
#include "tuner-i2c.h"
|
|
#include "r820t.h"
|
|
|
|
/*
|
|
* FIXME: I think that there are only 32 registers, but better safe than
|
|
* sorry. After finishing the driver, we may review it.
|
|
*/
|
|
#define REG_SHADOW_START 5
|
|
#define NUM_REGS 27
|
|
#define NUM_IMR 5
|
|
#define IMR_TRIAL 9
|
|
|
|
#define VER_NUM 49
|
|
|
|
static int debug;
|
|
module_param(debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "enable verbose debug messages");
|
|
|
|
static int no_imr_cal;
|
|
module_param(no_imr_cal, int, 0444);
|
|
MODULE_PARM_DESC(no_imr_cal, "Disable IMR calibration at module init");
|
|
|
|
|
|
/*
|
|
* enums and structures
|
|
*/
|
|
|
|
enum xtal_cap_value {
|
|
XTAL_LOW_CAP_30P = 0,
|
|
XTAL_LOW_CAP_20P,
|
|
XTAL_LOW_CAP_10P,
|
|
XTAL_LOW_CAP_0P,
|
|
XTAL_HIGH_CAP_0P
|
|
};
|
|
|
|
struct r820t_sect_type {
|
|
u8 phase_y;
|
|
u8 gain_x;
|
|
u16 value;
|
|
};
|
|
|
|
struct r820t_priv {
|
|
struct list_head hybrid_tuner_instance_list;
|
|
const struct r820t_config *cfg;
|
|
struct tuner_i2c_props i2c_props;
|
|
struct mutex lock;
|
|
|
|
u8 regs[NUM_REGS];
|
|
u8 buf[NUM_REGS + 1];
|
|
enum xtal_cap_value xtal_cap_sel;
|
|
u16 pll; /* kHz */
|
|
u32 int_freq;
|
|
u8 fil_cal_code;
|
|
bool imr_done;
|
|
bool has_lock;
|
|
bool init_done;
|
|
struct r820t_sect_type imr_data[NUM_IMR];
|
|
|
|
/* Store current mode */
|
|
u32 delsys;
|
|
enum v4l2_tuner_type type;
|
|
v4l2_std_id std;
|
|
u32 bw; /* in MHz */
|
|
};
|
|
|
|
struct r820t_freq_range {
|
|
u32 freq;
|
|
u8 open_d;
|
|
u8 rf_mux_ploy;
|
|
u8 tf_c;
|
|
u8 xtal_cap20p;
|
|
u8 xtal_cap10p;
|
|
u8 xtal_cap0p;
|
|
u8 imr_mem; /* Not used, currently */
|
|
};
|
|
|
|
#define VCO_POWER_REF 0x02
|
|
#define DIP_FREQ 32000000
|
|
|
|
/*
|
|
* Static constants
|
|
*/
|
|
|
|
static LIST_HEAD(hybrid_tuner_instance_list);
|
|
static DEFINE_MUTEX(r820t_list_mutex);
|
|
|
|
/* Those initial values start from REG_SHADOW_START */
|
|
static const u8 r820t_init_array[NUM_REGS] = {
|
|
0x83, 0x32, 0x75, /* 05 to 07 */
|
|
0xc0, 0x40, 0xd6, 0x6c, /* 08 to 0b */
|
|
0xf5, 0x63, 0x75, 0x68, /* 0c to 0f */
|
|
0x6c, 0x83, 0x80, 0x00, /* 10 to 13 */
|
|
0x0f, 0x00, 0xc0, 0x30, /* 14 to 17 */
|
|
0x48, 0xcc, 0x60, 0x00, /* 18 to 1b */
|
|
0x54, 0xae, 0x4a, 0xc0 /* 1c to 1f */
|
|
};
|
|
|
|
/* Tuner frequency ranges */
|
|
static const struct r820t_freq_range freq_ranges[] = {
|
|
{
|
|
.freq = 0,
|
|
.open_d = 0x08, /* low */
|
|
.rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */
|
|
.tf_c = 0xdf, /* R27[7:0] band2,band0 */
|
|
.xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */
|
|
.xtal_cap10p = 0x01,
|
|
.xtal_cap0p = 0x00,
|
|
.imr_mem = 0,
|
|
}, {
|
|
.freq = 50, /* Start freq, in MHz */
|
|
.open_d = 0x08, /* low */
|
|
.rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */
|
|
.tf_c = 0xbe, /* R27[7:0] band4,band1 */
|
|
.xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */
|
|
.xtal_cap10p = 0x01,
|
|
.xtal_cap0p = 0x00,
|
|
.imr_mem = 0,
|
|
}, {
|
|
.freq = 55, /* Start freq, in MHz */
|
|
.open_d = 0x08, /* low */
|
|
.rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */
|
|
.tf_c = 0x8b, /* R27[7:0] band7,band4 */
|
|
.xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */
|
|
.xtal_cap10p = 0x01,
|
|
.xtal_cap0p = 0x00,
|
|
.imr_mem = 0,
|
|
}, {
|
|
.freq = 60, /* Start freq, in MHz */
|
|
.open_d = 0x08, /* low */
|
|
.rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */
|
|
.tf_c = 0x7b, /* R27[7:0] band8,band4 */
|
|
.xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */
|
|
.xtal_cap10p = 0x01,
|
|
.xtal_cap0p = 0x00,
|
|
.imr_mem = 0,
|
|
}, {
|
|
.freq = 65, /* Start freq, in MHz */
|
|
.open_d = 0x08, /* low */
|
|
.rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */
|
|
.tf_c = 0x69, /* R27[7:0] band9,band6 */
|
|
.xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */
|
|
.xtal_cap10p = 0x01,
|
|
.xtal_cap0p = 0x00,
|
|
.imr_mem = 0,
|
|
}, {
|
|
.freq = 70, /* Start freq, in MHz */
|
|
.open_d = 0x08, /* low */
|
|
.rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */
|
|
.tf_c = 0x58, /* R27[7:0] band10,band7 */
|
|
.xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */
|
|
.xtal_cap10p = 0x01,
|
|
.xtal_cap0p = 0x00,
|
|
.imr_mem = 0,
|
|
}, {
|
|
.freq = 75, /* Start freq, in MHz */
|
|
.open_d = 0x00, /* high */
|
|
.rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */
|
|
.tf_c = 0x44, /* R27[7:0] band11,band11 */
|
|
.xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */
|
|
.xtal_cap10p = 0x01,
|
|
.xtal_cap0p = 0x00,
|
|
.imr_mem = 0,
|
|
}, {
|
|
.freq = 80, /* Start freq, in MHz */
|
|
.open_d = 0x00, /* high */
|
|
.rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */
|
|
.tf_c = 0x44, /* R27[7:0] band11,band11 */
|
|
.xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */
|
|
.xtal_cap10p = 0x01,
|
|
.xtal_cap0p = 0x00,
|
|
.imr_mem = 0,
|
|
}, {
|
|
.freq = 90, /* Start freq, in MHz */
|
|
.open_d = 0x00, /* high */
|
|
.rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */
|
|
.tf_c = 0x34, /* R27[7:0] band12,band11 */
|
|
.xtal_cap20p = 0x01, /* R16[1:0] 10pF (01) */
|
|
.xtal_cap10p = 0x01,
|
|
.xtal_cap0p = 0x00,
|
|
.imr_mem = 0,
|
|
}, {
|
|
.freq = 100, /* Start freq, in MHz */
|
|
.open_d = 0x00, /* high */
|
|
.rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */
|
|
.tf_c = 0x34, /* R27[7:0] band12,band11 */
|
|
.xtal_cap20p = 0x01, /* R16[1:0] 10pF (01) */
|
|
.xtal_cap10p = 0x01,
|
|
.xtal_cap0p = 0x00,
|
|
.imr_mem = 0,
|
|
}, {
|
|
.freq = 110, /* Start freq, in MHz */
|
|
.open_d = 0x00, /* high */
|
|
.rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */
|
|
.tf_c = 0x24, /* R27[7:0] band13,band11 */
|
|
.xtal_cap20p = 0x01, /* R16[1:0] 10pF (01) */
|
|
.xtal_cap10p = 0x01,
|
|
.xtal_cap0p = 0x00,
|
|
.imr_mem = 1,
|
|
}, {
|
|
.freq = 120, /* Start freq, in MHz */
|
|
.open_d = 0x00, /* high */
|
|
.rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */
|
|
.tf_c = 0x24, /* R27[7:0] band13,band11 */
|
|
.xtal_cap20p = 0x01, /* R16[1:0] 10pF (01) */
|
|
.xtal_cap10p = 0x01,
|
|
.xtal_cap0p = 0x00,
|
|
.imr_mem = 1,
|
|
}, {
|
|
.freq = 140, /* Start freq, in MHz */
|
|
.open_d = 0x00, /* high */
|
|
.rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */
|
|
.tf_c = 0x14, /* R27[7:0] band14,band11 */
|
|
.xtal_cap20p = 0x01, /* R16[1:0] 10pF (01) */
|
|
.xtal_cap10p = 0x01,
|
|
.xtal_cap0p = 0x00,
|
|
.imr_mem = 1,
|
|
}, {
|
|
.freq = 180, /* Start freq, in MHz */
|
|
.open_d = 0x00, /* high */
|
|
.rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */
|
|
.tf_c = 0x13, /* R27[7:0] band14,band12 */
|
|
.xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */
|
|
.xtal_cap10p = 0x00,
|
|
.xtal_cap0p = 0x00,
|
|
.imr_mem = 1,
|
|
}, {
|
|
.freq = 220, /* Start freq, in MHz */
|
|
.open_d = 0x00, /* high */
|
|
.rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */
|
|
.tf_c = 0x13, /* R27[7:0] band14,band12 */
|
|
.xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */
|
|
.xtal_cap10p = 0x00,
|
|
.xtal_cap0p = 0x00,
|
|
.imr_mem = 2,
|
|
}, {
|
|
.freq = 250, /* Start freq, in MHz */
|
|
.open_d = 0x00, /* high */
|
|
.rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */
|
|
.tf_c = 0x11, /* R27[7:0] highest,highest */
|
|
.xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */
|
|
.xtal_cap10p = 0x00,
|
|
.xtal_cap0p = 0x00,
|
|
.imr_mem = 2,
|
|
}, {
|
|
.freq = 280, /* Start freq, in MHz */
|
|
.open_d = 0x00, /* high */
|
|
.rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */
|
|
.tf_c = 0x00, /* R27[7:0] highest,highest */
|
|
.xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */
|
|
.xtal_cap10p = 0x00,
|
|
.xtal_cap0p = 0x00,
|
|
.imr_mem = 2,
|
|
}, {
|
|
.freq = 310, /* Start freq, in MHz */
|
|
.open_d = 0x00, /* high */
|
|
.rf_mux_ploy = 0x41, /* R26[7:6]=1 (bypass) R26[1:0]=1 (middle) */
|
|
.tf_c = 0x00, /* R27[7:0] highest,highest */
|
|
.xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */
|
|
.xtal_cap10p = 0x00,
|
|
.xtal_cap0p = 0x00,
|
|
.imr_mem = 2,
|
|
}, {
|
|
.freq = 450, /* Start freq, in MHz */
|
|
.open_d = 0x00, /* high */
|
|
.rf_mux_ploy = 0x41, /* R26[7:6]=1 (bypass) R26[1:0]=1 (middle) */
|
|
.tf_c = 0x00, /* R27[7:0] highest,highest */
|
|
.xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */
|
|
.xtal_cap10p = 0x00,
|
|
.xtal_cap0p = 0x00,
|
|
.imr_mem = 3,
|
|
}, {
|
|
.freq = 588, /* Start freq, in MHz */
|
|
.open_d = 0x00, /* high */
|
|
.rf_mux_ploy = 0x40, /* R26[7:6]=1 (bypass) R26[1:0]=0 (highest) */
|
|
.tf_c = 0x00, /* R27[7:0] highest,highest */
|
|
.xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */
|
|
.xtal_cap10p = 0x00,
|
|
.xtal_cap0p = 0x00,
|
|
.imr_mem = 3,
|
|
}, {
|
|
.freq = 650, /* Start freq, in MHz */
|
|
.open_d = 0x00, /* high */
|
|
.rf_mux_ploy = 0x40, /* R26[7:6]=1 (bypass) R26[1:0]=0 (highest) */
|
|
.tf_c = 0x00, /* R27[7:0] highest,highest */
|
|
.xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */
|
|
.xtal_cap10p = 0x00,
|
|
.xtal_cap0p = 0x00,
|
|
.imr_mem = 4,
|
|
}
|
|
};
|
|
|
|
static int r820t_xtal_capacitor[][2] = {
|
|
{ 0x0b, XTAL_LOW_CAP_30P },
|
|
{ 0x02, XTAL_LOW_CAP_20P },
|
|
{ 0x01, XTAL_LOW_CAP_10P },
|
|
{ 0x00, XTAL_LOW_CAP_0P },
|
|
{ 0x10, XTAL_HIGH_CAP_0P },
|
|
};
|
|
|
|
/*
|
|
* I2C read/write code and shadow registers logic
|
|
*/
|
|
static void shadow_store(struct r820t_priv *priv, u8 reg, const u8 *val,
|
|
int len)
|
|
{
|
|
int r = reg - REG_SHADOW_START;
|
|
|
|
if (r < 0) {
|
|
len += r;
|
|
r = 0;
|
|
}
|
|
if (len <= 0)
|
|
return;
|
|
if (len > NUM_REGS - r)
|
|
len = NUM_REGS - r;
|
|
|
|
tuner_dbg("%s: prev reg=%02x len=%d: %*ph\n",
|
|
__func__, r + REG_SHADOW_START, len, len, val);
|
|
|
|
memcpy(&priv->regs[r], val, len);
|
|
}
|
|
|
|
static int r820t_write(struct r820t_priv *priv, u8 reg, const u8 *val,
|
|
int len)
|
|
{
|
|
int rc, size, pos = 0;
|
|
|
|
/* Store the shadow registers */
|
|
shadow_store(priv, reg, val, len);
|
|
|
|
do {
|
|
if (len > priv->cfg->max_i2c_msg_len - 1)
|
|
size = priv->cfg->max_i2c_msg_len - 1;
|
|
else
|
|
size = len;
|
|
|
|
/* Fill I2C buffer */
|
|
priv->buf[0] = reg;
|
|
memcpy(&priv->buf[1], &val[pos], size);
|
|
|
|
rc = tuner_i2c_xfer_send(&priv->i2c_props, priv->buf, size + 1);
|
|
if (rc != size + 1) {
|
|
tuner_info("%s: i2c wr failed=%d reg=%02x len=%d: %*ph\n",
|
|
__func__, rc, reg, size, size, &priv->buf[1]);
|
|
if (rc < 0)
|
|
return rc;
|
|
return -EREMOTEIO;
|
|
}
|
|
tuner_dbg("%s: i2c wr reg=%02x len=%d: %*ph\n",
|
|
__func__, reg, size, size, &priv->buf[1]);
|
|
|
|
reg += size;
|
|
len -= size;
|
|
pos += size;
|
|
} while (len > 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline int r820t_write_reg(struct r820t_priv *priv, u8 reg, u8 val)
|
|
{
|
|
u8 tmp = val; /* work around GCC PR81715 with asan-stack=1 */
|
|
|
|
return r820t_write(priv, reg, &tmp, 1);
|
|
}
|
|
|
|
static int r820t_read_cache_reg(struct r820t_priv *priv, int reg)
|
|
{
|
|
reg -= REG_SHADOW_START;
|
|
|
|
if (reg >= 0 && reg < NUM_REGS)
|
|
return priv->regs[reg];
|
|
else
|
|
return -EINVAL;
|
|
}
|
|
|
|
static inline int r820t_write_reg_mask(struct r820t_priv *priv, u8 reg, u8 val,
|
|
u8 bit_mask)
|
|
{
|
|
u8 tmp = val;
|
|
int rc = r820t_read_cache_reg(priv, reg);
|
|
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
tmp = (rc & ~bit_mask) | (tmp & bit_mask);
|
|
|
|
return r820t_write(priv, reg, &tmp, 1);
|
|
}
|
|
|
|
static int r820t_read(struct r820t_priv *priv, u8 reg, u8 *val, int len)
|
|
{
|
|
int rc, i;
|
|
u8 *p = &priv->buf[1];
|
|
|
|
priv->buf[0] = reg;
|
|
|
|
rc = tuner_i2c_xfer_send_recv(&priv->i2c_props, priv->buf, 1, p, len);
|
|
if (rc != len) {
|
|
tuner_info("%s: i2c rd failed=%d reg=%02x len=%d: %*ph\n",
|
|
__func__, rc, reg, len, len, p);
|
|
if (rc < 0)
|
|
return rc;
|
|
return -EREMOTEIO;
|
|
}
|
|
|
|
/* Copy data to the output buffer */
|
|
for (i = 0; i < len; i++)
|
|
val[i] = bitrev8(p[i]);
|
|
|
|
tuner_dbg("%s: i2c rd reg=%02x len=%d: %*ph\n",
|
|
__func__, reg, len, len, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* r820t tuning logic
|
|
*/
|
|
|
|
static int r820t_set_mux(struct r820t_priv *priv, u32 freq)
|
|
{
|
|
const struct r820t_freq_range *range;
|
|
int i, rc;
|
|
u8 val, reg08, reg09;
|
|
|
|
/* Get the proper frequency range */
|
|
freq = freq / 1000000;
|
|
for (i = 0; i < ARRAY_SIZE(freq_ranges) - 1; i++) {
|
|
if (freq < freq_ranges[i + 1].freq)
|
|
break;
|
|
}
|
|
range = &freq_ranges[i];
|
|
|
|
tuner_dbg("set r820t range#%d for frequency %d MHz\n", i, freq);
|
|
|
|
/* Open Drain */
|
|
rc = r820t_write_reg_mask(priv, 0x17, range->open_d, 0x08);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* RF_MUX,Polymux */
|
|
rc = r820t_write_reg_mask(priv, 0x1a, range->rf_mux_ploy, 0xc3);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* TF BAND */
|
|
rc = r820t_write_reg(priv, 0x1b, range->tf_c);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* XTAL CAP & Drive */
|
|
switch (priv->xtal_cap_sel) {
|
|
case XTAL_LOW_CAP_30P:
|
|
case XTAL_LOW_CAP_20P:
|
|
val = range->xtal_cap20p | 0x08;
|
|
break;
|
|
case XTAL_LOW_CAP_10P:
|
|
val = range->xtal_cap10p | 0x08;
|
|
break;
|
|
case XTAL_HIGH_CAP_0P:
|
|
val = range->xtal_cap0p | 0x00;
|
|
break;
|
|
default:
|
|
case XTAL_LOW_CAP_0P:
|
|
val = range->xtal_cap0p | 0x08;
|
|
break;
|
|
}
|
|
rc = r820t_write_reg_mask(priv, 0x10, val, 0x0b);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
if (priv->imr_done) {
|
|
reg08 = priv->imr_data[range->imr_mem].gain_x;
|
|
reg09 = priv->imr_data[range->imr_mem].phase_y;
|
|
} else {
|
|
reg08 = 0;
|
|
reg09 = 0;
|
|
}
|
|
rc = r820t_write_reg_mask(priv, 0x08, reg08, 0x3f);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
rc = r820t_write_reg_mask(priv, 0x09, reg09, 0x3f);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int r820t_set_pll(struct r820t_priv *priv, enum v4l2_tuner_type type,
|
|
u32 freq)
|
|
{
|
|
u32 vco_freq;
|
|
int rc, i;
|
|
unsigned sleep_time = 10000;
|
|
u32 vco_fra; /* VCO contribution by SDM (kHz) */
|
|
u32 vco_min = 1770000;
|
|
u32 vco_max = vco_min * 2;
|
|
u32 pll_ref;
|
|
u16 n_sdm = 2;
|
|
u16 sdm = 0;
|
|
u8 mix_div = 2;
|
|
u8 div_buf = 0;
|
|
u8 div_num = 0;
|
|
u8 refdiv2 = 0;
|
|
u8 ni, si, nint, vco_fine_tune, val;
|
|
u8 data[5];
|
|
|
|
/* Frequency in kHz */
|
|
freq = freq / 1000;
|
|
pll_ref = priv->cfg->xtal / 1000;
|
|
|
|
#if 0
|
|
/* Doesn't exist on rtl-sdk, and on field tests, caused troubles */
|
|
if ((priv->cfg->rafael_chip == CHIP_R620D) ||
|
|
(priv->cfg->rafael_chip == CHIP_R828D) ||
|
|
(priv->cfg->rafael_chip == CHIP_R828)) {
|
|
/* ref set refdiv2, reffreq = Xtal/2 on ATV application */
|
|
if (type != V4L2_TUNER_DIGITAL_TV) {
|
|
pll_ref /= 2;
|
|
refdiv2 = 0x10;
|
|
sleep_time = 20000;
|
|
}
|
|
} else {
|
|
if (priv->cfg->xtal > 24000000) {
|
|
pll_ref /= 2;
|
|
refdiv2 = 0x10;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
rc = r820t_write_reg_mask(priv, 0x10, refdiv2, 0x10);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* set pll autotune = 128kHz */
|
|
rc = r820t_write_reg_mask(priv, 0x1a, 0x00, 0x0c);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* set VCO current = 100 */
|
|
rc = r820t_write_reg_mask(priv, 0x12, 0x80, 0xe0);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* Calculate divider */
|
|
while (mix_div <= 64) {
|
|
if (((freq * mix_div) >= vco_min) &&
|
|
((freq * mix_div) < vco_max)) {
|
|
div_buf = mix_div;
|
|
while (div_buf > 2) {
|
|
div_buf = div_buf >> 1;
|
|
div_num++;
|
|
}
|
|
break;
|
|
}
|
|
mix_div = mix_div << 1;
|
|
}
|
|
|
|
rc = r820t_read(priv, 0x00, data, sizeof(data));
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
vco_fine_tune = (data[4] & 0x30) >> 4;
|
|
|
|
tuner_dbg("mix_div=%d div_num=%d vco_fine_tune=%d\n",
|
|
mix_div, div_num, vco_fine_tune);
|
|
|
|
/*
|
|
* XXX: R828D/16MHz seems to have always vco_fine_tune=1.
|
|
* Due to that, this calculation goes wrong.
|
|
*/
|
|
if (priv->cfg->rafael_chip != CHIP_R828D) {
|
|
if (vco_fine_tune > VCO_POWER_REF)
|
|
div_num = div_num - 1;
|
|
else if (vco_fine_tune < VCO_POWER_REF)
|
|
div_num = div_num + 1;
|
|
}
|
|
|
|
rc = r820t_write_reg_mask(priv, 0x10, div_num << 5, 0xe0);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
vco_freq = freq * mix_div;
|
|
nint = vco_freq / (2 * pll_ref);
|
|
vco_fra = vco_freq - 2 * pll_ref * nint;
|
|
|
|
/* boundary spur prevention */
|
|
if (vco_fra < pll_ref / 64) {
|
|
vco_fra = 0;
|
|
} else if (vco_fra > pll_ref * 127 / 64) {
|
|
vco_fra = 0;
|
|
nint++;
|
|
} else if ((vco_fra > pll_ref * 127 / 128) && (vco_fra < pll_ref)) {
|
|
vco_fra = pll_ref * 127 / 128;
|
|
} else if ((vco_fra > pll_ref) && (vco_fra < pll_ref * 129 / 128)) {
|
|
vco_fra = pll_ref * 129 / 128;
|
|
}
|
|
|
|
ni = (nint - 13) / 4;
|
|
si = nint - 4 * ni - 13;
|
|
|
|
rc = r820t_write_reg(priv, 0x14, ni + (si << 6));
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* pw_sdm */
|
|
if (!vco_fra)
|
|
val = 0x08;
|
|
else
|
|
val = 0x00;
|
|
|
|
rc = r820t_write_reg_mask(priv, 0x12, val, 0x08);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* sdm calculator */
|
|
while (vco_fra > 1) {
|
|
if (vco_fra > (2 * pll_ref / n_sdm)) {
|
|
sdm = sdm + 32768 / (n_sdm / 2);
|
|
vco_fra = vco_fra - 2 * pll_ref / n_sdm;
|
|
if (n_sdm >= 0x8000)
|
|
break;
|
|
}
|
|
n_sdm = n_sdm << 1;
|
|
}
|
|
|
|
tuner_dbg("freq %d kHz, pll ref %d%s, sdm=0x%04x\n",
|
|
freq, pll_ref, refdiv2 ? " / 2" : "", sdm);
|
|
|
|
rc = r820t_write_reg(priv, 0x16, sdm >> 8);
|
|
if (rc < 0)
|
|
return rc;
|
|
rc = r820t_write_reg(priv, 0x15, sdm & 0xff);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
usleep_range(sleep_time, sleep_time + 1000);
|
|
|
|
/* Check if PLL has locked */
|
|
rc = r820t_read(priv, 0x00, data, 3);
|
|
if (rc < 0)
|
|
return rc;
|
|
if (data[2] & 0x40)
|
|
break;
|
|
|
|
if (!i) {
|
|
/* Didn't lock. Increase VCO current */
|
|
rc = r820t_write_reg_mask(priv, 0x12, 0x60, 0xe0);
|
|
if (rc < 0)
|
|
return rc;
|
|
}
|
|
}
|
|
|
|
if (!(data[2] & 0x40)) {
|
|
priv->has_lock = false;
|
|
return 0;
|
|
}
|
|
|
|
priv->has_lock = true;
|
|
tuner_dbg("tuner has lock at frequency %d kHz\n", freq);
|
|
|
|
/* set pll autotune = 8kHz */
|
|
rc = r820t_write_reg_mask(priv, 0x1a, 0x08, 0x08);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int r820t_sysfreq_sel(struct r820t_priv *priv, u32 freq,
|
|
enum v4l2_tuner_type type,
|
|
v4l2_std_id std,
|
|
u32 delsys)
|
|
{
|
|
int rc;
|
|
u8 mixer_top, lna_top, cp_cur, div_buf_cur, lna_vth_l, mixer_vth_l;
|
|
u8 air_cable1_in, cable2_in, pre_dect, lna_discharge, filter_cur;
|
|
|
|
tuner_dbg("adjusting tuner parameters for the standard\n");
|
|
|
|
switch (delsys) {
|
|
case SYS_DVBT:
|
|
if ((freq == 506000000) || (freq == 666000000) ||
|
|
(freq == 818000000)) {
|
|
mixer_top = 0x14; /* mixer top:14 , top-1, low-discharge */
|
|
lna_top = 0xe5; /* detect bw 3, lna top:4, predet top:2 */
|
|
cp_cur = 0x28; /* 101, 0.2 */
|
|
div_buf_cur = 0x20; /* 10, 200u */
|
|
} else {
|
|
mixer_top = 0x24; /* mixer top:13 , top-1, low-discharge */
|
|
lna_top = 0xe5; /* detect bw 3, lna top:4, predet top:2 */
|
|
cp_cur = 0x38; /* 111, auto */
|
|
div_buf_cur = 0x30; /* 11, 150u */
|
|
}
|
|
lna_vth_l = 0x53; /* lna vth 0.84 , vtl 0.64 */
|
|
mixer_vth_l = 0x75; /* mixer vth 1.04, vtl 0.84 */
|
|
air_cable1_in = 0x00;
|
|
cable2_in = 0x00;
|
|
pre_dect = 0x40;
|
|
lna_discharge = 14;
|
|
filter_cur = 0x40; /* 10, low */
|
|
break;
|
|
case SYS_DVBT2:
|
|
mixer_top = 0x24; /* mixer top:13 , top-1, low-discharge */
|
|
lna_top = 0xe5; /* detect bw 3, lna top:4, predet top:2 */
|
|
lna_vth_l = 0x53; /* lna vth 0.84 , vtl 0.64 */
|
|
mixer_vth_l = 0x75; /* mixer vth 1.04, vtl 0.84 */
|
|
air_cable1_in = 0x00;
|
|
cable2_in = 0x00;
|
|
pre_dect = 0x40;
|
|
lna_discharge = 14;
|
|
cp_cur = 0x38; /* 111, auto */
|
|
div_buf_cur = 0x30; /* 11, 150u */
|
|
filter_cur = 0x40; /* 10, low */
|
|
break;
|
|
case SYS_ISDBT:
|
|
mixer_top = 0x24; /* mixer top:13 , top-1, low-discharge */
|
|
lna_top = 0xe5; /* detect bw 3, lna top:4, predet top:2 */
|
|
lna_vth_l = 0x75; /* lna vth 1.04 , vtl 0.84 */
|
|
mixer_vth_l = 0x75; /* mixer vth 1.04, vtl 0.84 */
|
|
air_cable1_in = 0x00;
|
|
cable2_in = 0x00;
|
|
pre_dect = 0x40;
|
|
lna_discharge = 14;
|
|
cp_cur = 0x38; /* 111, auto */
|
|
div_buf_cur = 0x30; /* 11, 150u */
|
|
filter_cur = 0x40; /* 10, low */
|
|
break;
|
|
case SYS_DVBC_ANNEX_A:
|
|
mixer_top = 0x24; /* mixer top:13 , top-1, low-discharge */
|
|
lna_top = 0xe5;
|
|
lna_vth_l = 0x62;
|
|
mixer_vth_l = 0x75;
|
|
air_cable1_in = 0x60;
|
|
cable2_in = 0x00;
|
|
pre_dect = 0x40;
|
|
lna_discharge = 14;
|
|
cp_cur = 0x38; /* 111, auto */
|
|
div_buf_cur = 0x30; /* 11, 150u */
|
|
filter_cur = 0x40; /* 10, low */
|
|
break;
|
|
default: /* DVB-T 8M */
|
|
mixer_top = 0x24; /* mixer top:13 , top-1, low-discharge */
|
|
lna_top = 0xe5; /* detect bw 3, lna top:4, predet top:2 */
|
|
lna_vth_l = 0x53; /* lna vth 0.84 , vtl 0.64 */
|
|
mixer_vth_l = 0x75; /* mixer vth 1.04, vtl 0.84 */
|
|
air_cable1_in = 0x00;
|
|
cable2_in = 0x00;
|
|
pre_dect = 0x40;
|
|
lna_discharge = 14;
|
|
cp_cur = 0x38; /* 111, auto */
|
|
div_buf_cur = 0x30; /* 11, 150u */
|
|
filter_cur = 0x40; /* 10, low */
|
|
break;
|
|
}
|
|
|
|
if (priv->cfg->use_diplexer &&
|
|
((priv->cfg->rafael_chip == CHIP_R820T) ||
|
|
(priv->cfg->rafael_chip == CHIP_R828S) ||
|
|
(priv->cfg->rafael_chip == CHIP_R820C))) {
|
|
if (freq > DIP_FREQ)
|
|
air_cable1_in = 0x00;
|
|
else
|
|
air_cable1_in = 0x60;
|
|
cable2_in = 0x00;
|
|
}
|
|
|
|
|
|
if (priv->cfg->use_predetect) {
|
|
rc = r820t_write_reg_mask(priv, 0x06, pre_dect, 0x40);
|
|
if (rc < 0)
|
|
return rc;
|
|
}
|
|
|
|
rc = r820t_write_reg_mask(priv, 0x1d, lna_top, 0xc7);
|
|
if (rc < 0)
|
|
return rc;
|
|
rc = r820t_write_reg_mask(priv, 0x1c, mixer_top, 0xf8);
|
|
if (rc < 0)
|
|
return rc;
|
|
rc = r820t_write_reg(priv, 0x0d, lna_vth_l);
|
|
if (rc < 0)
|
|
return rc;
|
|
rc = r820t_write_reg(priv, 0x0e, mixer_vth_l);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* Air-IN only for Astrometa */
|
|
rc = r820t_write_reg_mask(priv, 0x05, air_cable1_in, 0x60);
|
|
if (rc < 0)
|
|
return rc;
|
|
rc = r820t_write_reg_mask(priv, 0x06, cable2_in, 0x08);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
rc = r820t_write_reg_mask(priv, 0x11, cp_cur, 0x38);
|
|
if (rc < 0)
|
|
return rc;
|
|
rc = r820t_write_reg_mask(priv, 0x17, div_buf_cur, 0x30);
|
|
if (rc < 0)
|
|
return rc;
|
|
rc = r820t_write_reg_mask(priv, 0x0a, filter_cur, 0x60);
|
|
if (rc < 0)
|
|
return rc;
|
|
/*
|
|
* Original driver initializes regs 0x05 and 0x06 with the
|
|
* same value again on this point. Probably, it is just an
|
|
* error there
|
|
*/
|
|
|
|
/*
|
|
* Set LNA
|
|
*/
|
|
|
|
tuner_dbg("adjusting LNA parameters\n");
|
|
if (type != V4L2_TUNER_ANALOG_TV) {
|
|
/* LNA TOP: lowest */
|
|
rc = r820t_write_reg_mask(priv, 0x1d, 0, 0x38);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* 0: normal mode */
|
|
rc = r820t_write_reg_mask(priv, 0x1c, 0, 0x04);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* 0: PRE_DECT off */
|
|
rc = r820t_write_reg_mask(priv, 0x06, 0, 0x40);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* agc clk 250hz */
|
|
rc = r820t_write_reg_mask(priv, 0x1a, 0x30, 0x30);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
msleep(250);
|
|
|
|
/* write LNA TOP = 3 */
|
|
rc = r820t_write_reg_mask(priv, 0x1d, 0x18, 0x38);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/*
|
|
* write discharge mode
|
|
* FIXME: IMHO, the mask here is wrong, but it matches
|
|
* what's there at the original driver
|
|
*/
|
|
rc = r820t_write_reg_mask(priv, 0x1c, mixer_top, 0x04);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* LNA discharge current */
|
|
rc = r820t_write_reg_mask(priv, 0x1e, lna_discharge, 0x1f);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* agc clk 60hz */
|
|
rc = r820t_write_reg_mask(priv, 0x1a, 0x20, 0x30);
|
|
if (rc < 0)
|
|
return rc;
|
|
} else {
|
|
/* PRE_DECT off */
|
|
rc = r820t_write_reg_mask(priv, 0x06, 0, 0x40);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* write LNA TOP */
|
|
rc = r820t_write_reg_mask(priv, 0x1d, lna_top, 0x38);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/*
|
|
* write discharge mode
|
|
* FIXME: IMHO, the mask here is wrong, but it matches
|
|
* what's there at the original driver
|
|
*/
|
|
rc = r820t_write_reg_mask(priv, 0x1c, mixer_top, 0x04);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* LNA discharge current */
|
|
rc = r820t_write_reg_mask(priv, 0x1e, lna_discharge, 0x1f);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* agc clk 1Khz, external det1 cap 1u */
|
|
rc = r820t_write_reg_mask(priv, 0x1a, 0x00, 0x30);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
rc = r820t_write_reg_mask(priv, 0x10, 0x00, 0x04);
|
|
if (rc < 0)
|
|
return rc;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int r820t_set_tv_standard(struct r820t_priv *priv,
|
|
unsigned bw,
|
|
enum v4l2_tuner_type type,
|
|
v4l2_std_id std, u32 delsys)
|
|
|
|
{
|
|
int rc, i;
|
|
u32 if_khz, filt_cal_lo;
|
|
u8 data[5], val;
|
|
u8 filt_gain, img_r, filt_q, hp_cor, ext_enable, loop_through;
|
|
u8 lt_att, flt_ext_widest, polyfil_cur;
|
|
bool need_calibration;
|
|
|
|
tuner_dbg("selecting the delivery system\n");
|
|
|
|
if (delsys == SYS_ISDBT) {
|
|
if_khz = 4063;
|
|
filt_cal_lo = 59000;
|
|
filt_gain = 0x10; /* +3db, 6mhz on */
|
|
img_r = 0x00; /* image negative */
|
|
filt_q = 0x10; /* r10[4]:low q(1'b1) */
|
|
hp_cor = 0x6a; /* 1.7m disable, +2cap, 1.25mhz */
|
|
ext_enable = 0x40; /* r30[6], ext enable; r30[5]:0 ext at lna max */
|
|
loop_through = 0x00; /* r5[7], lt on */
|
|
lt_att = 0x00; /* r31[7], lt att enable */
|
|
flt_ext_widest = 0x80; /* r15[7]: flt_ext_wide on */
|
|
polyfil_cur = 0x60; /* r25[6:5]:min */
|
|
} else if (delsys == SYS_DVBC_ANNEX_A) {
|
|
if_khz = 5070;
|
|
filt_cal_lo = 73500;
|
|
filt_gain = 0x10; /* +3db, 6mhz on */
|
|
img_r = 0x00; /* image negative */
|
|
filt_q = 0x10; /* r10[4]:low q(1'b1) */
|
|
hp_cor = 0x0b; /* 1.7m disable, +0cap, 1.0mhz */
|
|
ext_enable = 0x40; /* r30[6]=1 ext enable; r30[5]:1 ext at lna max-1 */
|
|
loop_through = 0x00; /* r5[7], lt on */
|
|
lt_att = 0x00; /* r31[7], lt att enable */
|
|
flt_ext_widest = 0x00; /* r15[7]: flt_ext_wide off */
|
|
polyfil_cur = 0x60; /* r25[6:5]:min */
|
|
} else if (delsys == SYS_DVBC_ANNEX_C) {
|
|
if_khz = 4063;
|
|
filt_cal_lo = 55000;
|
|
filt_gain = 0x10; /* +3db, 6mhz on */
|
|
img_r = 0x00; /* image negative */
|
|
filt_q = 0x10; /* r10[4]:low q(1'b1) */
|
|
hp_cor = 0x6a; /* 1.7m disable, +0cap, 1.0mhz */
|
|
ext_enable = 0x40; /* r30[6]=1 ext enable; r30[5]:1 ext at lna max-1 */
|
|
loop_through = 0x00; /* r5[7], lt on */
|
|
lt_att = 0x00; /* r31[7], lt att enable */
|
|
flt_ext_widest = 0x80; /* r15[7]: flt_ext_wide on */
|
|
polyfil_cur = 0x60; /* r25[6:5]:min */
|
|
} else {
|
|
if (bw <= 6) {
|
|
if_khz = 3570;
|
|
filt_cal_lo = 56000; /* 52000->56000 */
|
|
filt_gain = 0x10; /* +3db, 6mhz on */
|
|
img_r = 0x00; /* image negative */
|
|
filt_q = 0x10; /* r10[4]:low q(1'b1) */
|
|
hp_cor = 0x6b; /* 1.7m disable, +2cap, 1.0mhz */
|
|
ext_enable = 0x60; /* r30[6]=1 ext enable; r30[5]:1 ext at lna max-1 */
|
|
loop_through = 0x00; /* r5[7], lt on */
|
|
lt_att = 0x00; /* r31[7], lt att enable */
|
|
flt_ext_widest = 0x00; /* r15[7]: flt_ext_wide off */
|
|
polyfil_cur = 0x60; /* r25[6:5]:min */
|
|
} else if (bw == 7) {
|
|
#if 0
|
|
/*
|
|
* There are two 7 MHz tables defined on the original
|
|
* driver, but just the second one seems to be visible
|
|
* by rtl2832. Keep this one here commented, as it
|
|
* might be needed in the future
|
|
*/
|
|
|
|
if_khz = 4070;
|
|
filt_cal_lo = 60000;
|
|
filt_gain = 0x10; /* +3db, 6mhz on */
|
|
img_r = 0x00; /* image negative */
|
|
filt_q = 0x10; /* r10[4]:low q(1'b1) */
|
|
hp_cor = 0x2b; /* 1.7m disable, +1cap, 1.0mhz */
|
|
ext_enable = 0x60; /* r30[6]=1 ext enable; r30[5]:1 ext at lna max-1 */
|
|
loop_through = 0x00; /* r5[7], lt on */
|
|
lt_att = 0x00; /* r31[7], lt att enable */
|
|
flt_ext_widest = 0x00; /* r15[7]: flt_ext_wide off */
|
|
polyfil_cur = 0x60; /* r25[6:5]:min */
|
|
#endif
|
|
/* 7 MHz, second table */
|
|
if_khz = 4570;
|
|
filt_cal_lo = 63000;
|
|
filt_gain = 0x10; /* +3db, 6mhz on */
|
|
img_r = 0x00; /* image negative */
|
|
filt_q = 0x10; /* r10[4]:low q(1'b1) */
|
|
hp_cor = 0x2a; /* 1.7m disable, +1cap, 1.25mhz */
|
|
ext_enable = 0x60; /* r30[6]=1 ext enable; r30[5]:1 ext at lna max-1 */
|
|
loop_through = 0x00; /* r5[7], lt on */
|
|
lt_att = 0x00; /* r31[7], lt att enable */
|
|
flt_ext_widest = 0x00; /* r15[7]: flt_ext_wide off */
|
|
polyfil_cur = 0x60; /* r25[6:5]:min */
|
|
} else {
|
|
if_khz = 4570;
|
|
filt_cal_lo = 68500;
|
|
filt_gain = 0x10; /* +3db, 6mhz on */
|
|
img_r = 0x00; /* image negative */
|
|
filt_q = 0x10; /* r10[4]:low q(1'b1) */
|
|
hp_cor = 0x0b; /* 1.7m disable, +0cap, 1.0mhz */
|
|
ext_enable = 0x60; /* r30[6]=1 ext enable; r30[5]:1 ext at lna max-1 */
|
|
loop_through = 0x00; /* r5[7], lt on */
|
|
lt_att = 0x00; /* r31[7], lt att enable */
|
|
flt_ext_widest = 0x00; /* r15[7]: flt_ext_wide off */
|
|
polyfil_cur = 0x60; /* r25[6:5]:min */
|
|
}
|
|
}
|
|
|
|
/* Initialize the shadow registers */
|
|
memcpy(priv->regs, r820t_init_array, sizeof(r820t_init_array));
|
|
|
|
/* Init Flag & Xtal_check Result */
|
|
if (priv->imr_done)
|
|
val = 1 | priv->xtal_cap_sel << 1;
|
|
else
|
|
val = 0;
|
|
rc = r820t_write_reg_mask(priv, 0x0c, val, 0x0f);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* version */
|
|
rc = r820t_write_reg_mask(priv, 0x13, VER_NUM, 0x3f);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* for LT Gain test */
|
|
if (type != V4L2_TUNER_ANALOG_TV) {
|
|
rc = r820t_write_reg_mask(priv, 0x1d, 0x00, 0x38);
|
|
if (rc < 0)
|
|
return rc;
|
|
usleep_range(1000, 2000);
|
|
}
|
|
priv->int_freq = if_khz * 1000;
|
|
|
|
/* Check if standard changed. If so, filter calibration is needed */
|
|
if (type != priv->type)
|
|
need_calibration = true;
|
|
else if ((type == V4L2_TUNER_ANALOG_TV) && (std != priv->std))
|
|
need_calibration = true;
|
|
else if ((type == V4L2_TUNER_DIGITAL_TV) &&
|
|
((delsys != priv->delsys) || bw != priv->bw))
|
|
need_calibration = true;
|
|
else
|
|
need_calibration = false;
|
|
|
|
if (need_calibration) {
|
|
tuner_dbg("calibrating the tuner\n");
|
|
for (i = 0; i < 2; i++) {
|
|
/* Set filt_cap */
|
|
rc = r820t_write_reg_mask(priv, 0x0b, hp_cor, 0x60);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* set cali clk =on */
|
|
rc = r820t_write_reg_mask(priv, 0x0f, 0x04, 0x04);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* X'tal cap 0pF for PLL */
|
|
rc = r820t_write_reg_mask(priv, 0x10, 0x00, 0x03);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
rc = r820t_set_pll(priv, type, filt_cal_lo * 1000);
|
|
if (rc < 0 || !priv->has_lock)
|
|
return rc;
|
|
|
|
/* Start Trigger */
|
|
rc = r820t_write_reg_mask(priv, 0x0b, 0x10, 0x10);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
usleep_range(1000, 2000);
|
|
|
|
/* Stop Trigger */
|
|
rc = r820t_write_reg_mask(priv, 0x0b, 0x00, 0x10);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* set cali clk =off */
|
|
rc = r820t_write_reg_mask(priv, 0x0f, 0x00, 0x04);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* Check if calibration worked */
|
|
rc = r820t_read(priv, 0x00, data, sizeof(data));
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
priv->fil_cal_code = data[4] & 0x0f;
|
|
if (priv->fil_cal_code && priv->fil_cal_code != 0x0f)
|
|
break;
|
|
}
|
|
/* narrowest */
|
|
if (priv->fil_cal_code == 0x0f)
|
|
priv->fil_cal_code = 0;
|
|
}
|
|
|
|
rc = r820t_write_reg_mask(priv, 0x0a,
|
|
filt_q | priv->fil_cal_code, 0x1f);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* Set BW, Filter_gain, & HP corner */
|
|
rc = r820t_write_reg_mask(priv, 0x0b, hp_cor, 0xef);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
|
|
/* Set Img_R */
|
|
rc = r820t_write_reg_mask(priv, 0x07, img_r, 0x80);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* Set filt_3dB, V6MHz */
|
|
rc = r820t_write_reg_mask(priv, 0x06, filt_gain, 0x30);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* channel filter extension */
|
|
rc = r820t_write_reg_mask(priv, 0x1e, ext_enable, 0x60);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* Loop through */
|
|
rc = r820t_write_reg_mask(priv, 0x05, loop_through, 0x80);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* Loop through attenuation */
|
|
rc = r820t_write_reg_mask(priv, 0x1f, lt_att, 0x80);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* filter extension widest */
|
|
rc = r820t_write_reg_mask(priv, 0x0f, flt_ext_widest, 0x80);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* RF poly filter current */
|
|
rc = r820t_write_reg_mask(priv, 0x19, polyfil_cur, 0x60);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* Store current standard. If it changes, re-calibrate the tuner */
|
|
priv->delsys = delsys;
|
|
priv->type = type;
|
|
priv->std = std;
|
|
priv->bw = bw;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int r820t_read_gain(struct r820t_priv *priv)
|
|
{
|
|
u8 data[4];
|
|
int rc;
|
|
|
|
rc = r820t_read(priv, 0x00, data, sizeof(data));
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
return ((data[3] & 0x08) << 1) + ((data[3] & 0xf0) >> 4);
|
|
}
|
|
|
|
#if 0
|
|
/* FIXME: This routine requires more testing */
|
|
|
|
/*
|
|
* measured with a Racal 6103E GSM test set at 928 MHz with -60 dBm
|
|
* input power, for raw results see:
|
|
* http://steve-m.de/projects/rtl-sdr/gain_measurement/r820t/
|
|
*/
|
|
|
|
static const int r820t_lna_gain_steps[] = {
|
|
0, 9, 13, 40, 38, 13, 31, 22, 26, 31, 26, 14, 19, 5, 35, 13
|
|
};
|
|
|
|
static const int r820t_mixer_gain_steps[] = {
|
|
0, 5, 10, 10, 19, 9, 10, 25, 17, 10, 8, 16, 13, 6, 3, -8
|
|
};
|
|
|
|
static int r820t_set_gain_mode(struct r820t_priv *priv,
|
|
bool set_manual_gain,
|
|
int gain)
|
|
{
|
|
int rc;
|
|
|
|
if (set_manual_gain) {
|
|
int i, total_gain = 0;
|
|
uint8_t mix_index = 0, lna_index = 0;
|
|
u8 data[4];
|
|
|
|
/* LNA auto off */
|
|
rc = r820t_write_reg_mask(priv, 0x05, 0x10, 0x10);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* Mixer auto off */
|
|
rc = r820t_write_reg_mask(priv, 0x07, 0, 0x10);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
rc = r820t_read(priv, 0x00, data, sizeof(data));
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* set fixed VGA gain for now (16.3 dB) */
|
|
rc = r820t_write_reg_mask(priv, 0x0c, 0x08, 0x9f);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
for (i = 0; i < 15; i++) {
|
|
if (total_gain >= gain)
|
|
break;
|
|
|
|
total_gain += r820t_lna_gain_steps[++lna_index];
|
|
|
|
if (total_gain >= gain)
|
|
break;
|
|
|
|
total_gain += r820t_mixer_gain_steps[++mix_index];
|
|
}
|
|
|
|
/* set LNA gain */
|
|
rc = r820t_write_reg_mask(priv, 0x05, lna_index, 0x0f);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* set Mixer gain */
|
|
rc = r820t_write_reg_mask(priv, 0x07, mix_index, 0x0f);
|
|
if (rc < 0)
|
|
return rc;
|
|
} else {
|
|
/* LNA */
|
|
rc = r820t_write_reg_mask(priv, 0x05, 0, 0x10);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* Mixer */
|
|
rc = r820t_write_reg_mask(priv, 0x07, 0x10, 0x10);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* set fixed VGA gain for now (26.5 dB) */
|
|
rc = r820t_write_reg_mask(priv, 0x0c, 0x0b, 0x9f);
|
|
if (rc < 0)
|
|
return rc;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int generic_set_freq(struct dvb_frontend *fe,
|
|
u32 freq /* in HZ */,
|
|
unsigned bw,
|
|
enum v4l2_tuner_type type,
|
|
v4l2_std_id std, u32 delsys)
|
|
{
|
|
struct r820t_priv *priv = fe->tuner_priv;
|
|
int rc;
|
|
u32 lo_freq;
|
|
|
|
tuner_dbg("should set frequency to %d kHz, bw %d MHz\n",
|
|
freq / 1000, bw);
|
|
|
|
rc = r820t_set_tv_standard(priv, bw, type, std, delsys);
|
|
if (rc < 0)
|
|
goto err;
|
|
|
|
if ((type == V4L2_TUNER_ANALOG_TV) && (std == V4L2_STD_SECAM_LC))
|
|
lo_freq = freq - priv->int_freq;
|
|
else
|
|
lo_freq = freq + priv->int_freq;
|
|
|
|
rc = r820t_set_mux(priv, lo_freq);
|
|
if (rc < 0)
|
|
goto err;
|
|
|
|
rc = r820t_set_pll(priv, type, lo_freq);
|
|
if (rc < 0 || !priv->has_lock)
|
|
goto err;
|
|
|
|
rc = r820t_sysfreq_sel(priv, freq, type, std, delsys);
|
|
if (rc < 0)
|
|
goto err;
|
|
|
|
tuner_dbg("%s: PLL locked on frequency %d Hz, gain=%d\n",
|
|
__func__, freq, r820t_read_gain(priv));
|
|
|
|
err:
|
|
|
|
if (rc < 0)
|
|
tuner_dbg("%s: failed=%d\n", __func__, rc);
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* r820t standby logic
|
|
*/
|
|
|
|
static int r820t_standby(struct r820t_priv *priv)
|
|
{
|
|
int rc;
|
|
|
|
/* If device was not initialized yet, don't need to standby */
|
|
if (!priv->init_done)
|
|
return 0;
|
|
|
|
rc = r820t_write_reg(priv, 0x06, 0xb1);
|
|
if (rc < 0)
|
|
return rc;
|
|
rc = r820t_write_reg(priv, 0x05, 0x03);
|
|
if (rc < 0)
|
|
return rc;
|
|
rc = r820t_write_reg(priv, 0x07, 0x3a);
|
|
if (rc < 0)
|
|
return rc;
|
|
rc = r820t_write_reg(priv, 0x08, 0x40);
|
|
if (rc < 0)
|
|
return rc;
|
|
rc = r820t_write_reg(priv, 0x09, 0xc0);
|
|
if (rc < 0)
|
|
return rc;
|
|
rc = r820t_write_reg(priv, 0x0a, 0x36);
|
|
if (rc < 0)
|
|
return rc;
|
|
rc = r820t_write_reg(priv, 0x0c, 0x35);
|
|
if (rc < 0)
|
|
return rc;
|
|
rc = r820t_write_reg(priv, 0x0f, 0x68);
|
|
if (rc < 0)
|
|
return rc;
|
|
rc = r820t_write_reg(priv, 0x11, 0x03);
|
|
if (rc < 0)
|
|
return rc;
|
|
rc = r820t_write_reg(priv, 0x17, 0xf4);
|
|
if (rc < 0)
|
|
return rc;
|
|
rc = r820t_write_reg(priv, 0x19, 0x0c);
|
|
|
|
/* Force initial calibration */
|
|
priv->type = -1;
|
|
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* r820t device init logic
|
|
*/
|
|
|
|
static int r820t_xtal_check(struct r820t_priv *priv)
|
|
{
|
|
int rc, i;
|
|
u8 data[3], val;
|
|
|
|
/* Initialize the shadow registers */
|
|
memcpy(priv->regs, r820t_init_array, sizeof(r820t_init_array));
|
|
|
|
/* cap 30pF & Drive Low */
|
|
rc = r820t_write_reg_mask(priv, 0x10, 0x0b, 0x0b);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* set pll autotune = 128kHz */
|
|
rc = r820t_write_reg_mask(priv, 0x1a, 0x00, 0x0c);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* set manual initial reg = 111111; */
|
|
rc = r820t_write_reg_mask(priv, 0x13, 0x7f, 0x7f);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* set auto */
|
|
rc = r820t_write_reg_mask(priv, 0x13, 0x00, 0x40);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* Try several xtal capacitor alternatives */
|
|
for (i = 0; i < ARRAY_SIZE(r820t_xtal_capacitor); i++) {
|
|
rc = r820t_write_reg_mask(priv, 0x10,
|
|
r820t_xtal_capacitor[i][0], 0x1b);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
usleep_range(5000, 6000);
|
|
|
|
rc = r820t_read(priv, 0x00, data, sizeof(data));
|
|
if (rc < 0)
|
|
return rc;
|
|
if (!(data[2] & 0x40))
|
|
continue;
|
|
|
|
val = data[2] & 0x3f;
|
|
|
|
if (priv->cfg->xtal == 16000000 && (val > 29 || val < 23))
|
|
break;
|
|
|
|
if (val != 0x3f)
|
|
break;
|
|
}
|
|
|
|
if (i == ARRAY_SIZE(r820t_xtal_capacitor))
|
|
return -EINVAL;
|
|
|
|
return r820t_xtal_capacitor[i][1];
|
|
}
|
|
|
|
static int r820t_imr_prepare(struct r820t_priv *priv)
|
|
{
|
|
int rc;
|
|
|
|
/* Initialize the shadow registers */
|
|
memcpy(priv->regs, r820t_init_array, sizeof(r820t_init_array));
|
|
|
|
/* lna off (air-in off) */
|
|
rc = r820t_write_reg_mask(priv, 0x05, 0x20, 0x20);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* mixer gain mode = manual */
|
|
rc = r820t_write_reg_mask(priv, 0x07, 0, 0x10);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* filter corner = lowest */
|
|
rc = r820t_write_reg_mask(priv, 0x0a, 0x0f, 0x0f);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* filter bw=+2cap, hp=5M */
|
|
rc = r820t_write_reg_mask(priv, 0x0b, 0x60, 0x6f);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* adc=on, vga code mode, gain = 26.5dB */
|
|
rc = r820t_write_reg_mask(priv, 0x0c, 0x0b, 0x9f);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* ring clk = on */
|
|
rc = r820t_write_reg_mask(priv, 0x0f, 0, 0x08);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* ring power = on */
|
|
rc = r820t_write_reg_mask(priv, 0x18, 0x10, 0x10);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* from ring = ring pll in */
|
|
rc = r820t_write_reg_mask(priv, 0x1c, 0x02, 0x02);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* sw_pdect = det3 */
|
|
rc = r820t_write_reg_mask(priv, 0x1e, 0x80, 0x80);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* Set filt_3dB */
|
|
rc = r820t_write_reg_mask(priv, 0x06, 0x20, 0x20);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int r820t_multi_read(struct r820t_priv *priv)
|
|
{
|
|
int rc, i;
|
|
u16 sum = 0;
|
|
u8 data[2], min = 255, max = 0;
|
|
|
|
usleep_range(5000, 6000);
|
|
|
|
for (i = 0; i < 6; i++) {
|
|
rc = r820t_read(priv, 0x00, data, sizeof(data));
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
sum += data[1];
|
|
|
|
if (data[1] < min)
|
|
min = data[1];
|
|
|
|
if (data[1] > max)
|
|
max = data[1];
|
|
}
|
|
rc = sum - max - min;
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int r820t_imr_cross(struct r820t_priv *priv,
|
|
struct r820t_sect_type iq_point[3],
|
|
u8 *x_direct)
|
|
{
|
|
struct r820t_sect_type cross[5]; /* (0,0)(0,Q-1)(0,I-1)(Q-1,0)(I-1,0) */
|
|
struct r820t_sect_type tmp;
|
|
int i, rc;
|
|
u8 reg08, reg09;
|
|
|
|
reg08 = r820t_read_cache_reg(priv, 8) & 0xc0;
|
|
reg09 = r820t_read_cache_reg(priv, 9) & 0xc0;
|
|
|
|
tmp.gain_x = 0;
|
|
tmp.phase_y = 0;
|
|
tmp.value = 255;
|
|
|
|
for (i = 0; i < 5; i++) {
|
|
switch (i) {
|
|
case 0:
|
|
cross[i].gain_x = reg08;
|
|
cross[i].phase_y = reg09;
|
|
break;
|
|
case 1:
|
|
cross[i].gain_x = reg08; /* 0 */
|
|
cross[i].phase_y = reg09 + 1; /* Q-1 */
|
|
break;
|
|
case 2:
|
|
cross[i].gain_x = reg08; /* 0 */
|
|
cross[i].phase_y = (reg09 | 0x20) + 1; /* I-1 */
|
|
break;
|
|
case 3:
|
|
cross[i].gain_x = reg08 + 1; /* Q-1 */
|
|
cross[i].phase_y = reg09;
|
|
break;
|
|
default:
|
|
cross[i].gain_x = (reg08 | 0x20) + 1; /* I-1 */
|
|
cross[i].phase_y = reg09;
|
|
}
|
|
|
|
rc = r820t_write_reg(priv, 0x08, cross[i].gain_x);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
rc = r820t_write_reg(priv, 0x09, cross[i].phase_y);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
rc = r820t_multi_read(priv);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
cross[i].value = rc;
|
|
|
|
if (cross[i].value < tmp.value)
|
|
tmp = cross[i];
|
|
}
|
|
|
|
if ((tmp.phase_y & 0x1f) == 1) { /* y-direction */
|
|
*x_direct = 0;
|
|
|
|
iq_point[0] = cross[0];
|
|
iq_point[1] = cross[1];
|
|
iq_point[2] = cross[2];
|
|
} else { /* (0,0) or x-direction */
|
|
*x_direct = 1;
|
|
|
|
iq_point[0] = cross[0];
|
|
iq_point[1] = cross[3];
|
|
iq_point[2] = cross[4];
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void r820t_compre_cor(struct r820t_sect_type iq[3])
|
|
{
|
|
int i;
|
|
|
|
for (i = 3; i > 0; i--) {
|
|
if (iq[0].value > iq[i - 1].value)
|
|
swap(iq[0], iq[i - 1]);
|
|
}
|
|
}
|
|
|
|
static int r820t_compre_step(struct r820t_priv *priv,
|
|
struct r820t_sect_type iq[3], u8 reg)
|
|
{
|
|
int rc;
|
|
struct r820t_sect_type tmp;
|
|
|
|
/*
|
|
* Purpose: if (Gain<9 or Phase<9), Gain+1 or Phase+1 and compare
|
|
* with min value:
|
|
* new < min => update to min and continue
|
|
* new > min => Exit
|
|
*/
|
|
|
|
/* min value already saved in iq[0] */
|
|
tmp.phase_y = iq[0].phase_y;
|
|
tmp.gain_x = iq[0].gain_x;
|
|
|
|
while (((tmp.gain_x & 0x1f) < IMR_TRIAL) &&
|
|
((tmp.phase_y & 0x1f) < IMR_TRIAL)) {
|
|
if (reg == 0x08)
|
|
tmp.gain_x++;
|
|
else
|
|
tmp.phase_y++;
|
|
|
|
rc = r820t_write_reg(priv, 0x08, tmp.gain_x);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
rc = r820t_write_reg(priv, 0x09, tmp.phase_y);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
rc = r820t_multi_read(priv);
|
|
if (rc < 0)
|
|
return rc;
|
|
tmp.value = rc;
|
|
|
|
if (tmp.value <= iq[0].value) {
|
|
iq[0].gain_x = tmp.gain_x;
|
|
iq[0].phase_y = tmp.phase_y;
|
|
iq[0].value = tmp.value;
|
|
} else {
|
|
return 0;
|
|
}
|
|
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int r820t_iq_tree(struct r820t_priv *priv,
|
|
struct r820t_sect_type iq[3],
|
|
u8 fix_val, u8 var_val, u8 fix_reg)
|
|
{
|
|
int rc, i;
|
|
u8 tmp, var_reg;
|
|
|
|
/*
|
|
* record IMC results by input gain/phase location then adjust
|
|
* gain or phase positive 1 step and negative 1 step,
|
|
* both record results
|
|
*/
|
|
|
|
if (fix_reg == 0x08)
|
|
var_reg = 0x09;
|
|
else
|
|
var_reg = 0x08;
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
rc = r820t_write_reg(priv, fix_reg, fix_val);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
rc = r820t_write_reg(priv, var_reg, var_val);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
rc = r820t_multi_read(priv);
|
|
if (rc < 0)
|
|
return rc;
|
|
iq[i].value = rc;
|
|
|
|
if (fix_reg == 0x08) {
|
|
iq[i].gain_x = fix_val;
|
|
iq[i].phase_y = var_val;
|
|
} else {
|
|
iq[i].phase_y = fix_val;
|
|
iq[i].gain_x = var_val;
|
|
}
|
|
|
|
if (i == 0) { /* try right-side point */
|
|
var_val++;
|
|
} else if (i == 1) { /* try left-side point */
|
|
/* if absolute location is 1, change I/Q direction */
|
|
if ((var_val & 0x1f) < 0x02) {
|
|
tmp = 2 - (var_val & 0x1f);
|
|
|
|
/* b[5]:I/Q selection. 0:Q-path, 1:I-path */
|
|
if (var_val & 0x20) {
|
|
var_val &= 0xc0;
|
|
var_val |= tmp;
|
|
} else {
|
|
var_val |= 0x20 | tmp;
|
|
}
|
|
} else {
|
|
var_val -= 2;
|
|
}
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int r820t_section(struct r820t_priv *priv,
|
|
struct r820t_sect_type *iq_point)
|
|
{
|
|
int rc;
|
|
struct r820t_sect_type compare_iq[3], compare_bet[3];
|
|
|
|
/* Try X-1 column and save min result to compare_bet[0] */
|
|
if (!(iq_point->gain_x & 0x1f))
|
|
compare_iq[0].gain_x = ((iq_point->gain_x) & 0xdf) + 1; /* Q-path, Gain=1 */
|
|
else
|
|
compare_iq[0].gain_x = iq_point->gain_x - 1; /* left point */
|
|
compare_iq[0].phase_y = iq_point->phase_y;
|
|
|
|
/* y-direction */
|
|
rc = r820t_iq_tree(priv, compare_iq, compare_iq[0].gain_x,
|
|
compare_iq[0].phase_y, 0x08);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
r820t_compre_cor(compare_iq);
|
|
|
|
compare_bet[0] = compare_iq[0];
|
|
|
|
/* Try X column and save min result to compare_bet[1] */
|
|
compare_iq[0].gain_x = iq_point->gain_x;
|
|
compare_iq[0].phase_y = iq_point->phase_y;
|
|
|
|
rc = r820t_iq_tree(priv, compare_iq, compare_iq[0].gain_x,
|
|
compare_iq[0].phase_y, 0x08);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
r820t_compre_cor(compare_iq);
|
|
|
|
compare_bet[1] = compare_iq[0];
|
|
|
|
/* Try X+1 column and save min result to compare_bet[2] */
|
|
if ((iq_point->gain_x & 0x1f) == 0x00)
|
|
compare_iq[0].gain_x = ((iq_point->gain_x) | 0x20) + 1; /* I-path, Gain=1 */
|
|
else
|
|
compare_iq[0].gain_x = iq_point->gain_x + 1;
|
|
compare_iq[0].phase_y = iq_point->phase_y;
|
|
|
|
rc = r820t_iq_tree(priv, compare_iq, compare_iq[0].gain_x,
|
|
compare_iq[0].phase_y, 0x08);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
r820t_compre_cor(compare_iq);
|
|
|
|
compare_bet[2] = compare_iq[0];
|
|
|
|
r820t_compre_cor(compare_bet);
|
|
|
|
*iq_point = compare_bet[0];
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int r820t_vga_adjust(struct r820t_priv *priv)
|
|
{
|
|
int rc;
|
|
u8 vga_count;
|
|
|
|
/* increase vga power to let image significant */
|
|
for (vga_count = 12; vga_count < 16; vga_count++) {
|
|
rc = r820t_write_reg_mask(priv, 0x0c, vga_count, 0x0f);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
usleep_range(10000, 11000);
|
|
|
|
rc = r820t_multi_read(priv);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
if (rc > 40 * 4)
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int r820t_iq(struct r820t_priv *priv, struct r820t_sect_type *iq_pont)
|
|
{
|
|
struct r820t_sect_type compare_iq[3];
|
|
int rc;
|
|
u8 x_direction = 0; /* 1:x, 0:y */
|
|
u8 dir_reg, other_reg;
|
|
|
|
r820t_vga_adjust(priv);
|
|
|
|
rc = r820t_imr_cross(priv, compare_iq, &x_direction);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
if (x_direction == 1) {
|
|
dir_reg = 0x08;
|
|
other_reg = 0x09;
|
|
} else {
|
|
dir_reg = 0x09;
|
|
other_reg = 0x08;
|
|
}
|
|
|
|
/* compare and find min of 3 points. determine i/q direction */
|
|
r820t_compre_cor(compare_iq);
|
|
|
|
/* increase step to find min value of this direction */
|
|
rc = r820t_compre_step(priv, compare_iq, dir_reg);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* the other direction */
|
|
rc = r820t_iq_tree(priv, compare_iq, compare_iq[0].gain_x,
|
|
compare_iq[0].phase_y, dir_reg);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* compare and find min of 3 points. determine i/q direction */
|
|
r820t_compre_cor(compare_iq);
|
|
|
|
/* increase step to find min value on this direction */
|
|
rc = r820t_compre_step(priv, compare_iq, other_reg);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* check 3 points again */
|
|
rc = r820t_iq_tree(priv, compare_iq, compare_iq[0].gain_x,
|
|
compare_iq[0].phase_y, other_reg);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
r820t_compre_cor(compare_iq);
|
|
|
|
/* section-9 check */
|
|
rc = r820t_section(priv, compare_iq);
|
|
|
|
*iq_pont = compare_iq[0];
|
|
|
|
/* reset gain/phase control setting */
|
|
rc = r820t_write_reg_mask(priv, 0x08, 0, 0x3f);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
rc = r820t_write_reg_mask(priv, 0x09, 0, 0x3f);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int r820t_f_imr(struct r820t_priv *priv, struct r820t_sect_type *iq_pont)
|
|
{
|
|
int rc;
|
|
|
|
r820t_vga_adjust(priv);
|
|
|
|
/*
|
|
* search surrounding points from previous point
|
|
* try (x-1), (x), (x+1) columns, and find min IMR result point
|
|
*/
|
|
rc = r820t_section(priv, iq_pont);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int r820t_imr(struct r820t_priv *priv, unsigned imr_mem, bool im_flag)
|
|
{
|
|
struct r820t_sect_type imr_point;
|
|
int rc;
|
|
u32 ring_vco, ring_freq, ring_ref;
|
|
u8 n_ring, n;
|
|
int reg18, reg19, reg1f;
|
|
|
|
if (priv->cfg->xtal > 24000000)
|
|
ring_ref = priv->cfg->xtal / 2000;
|
|
else
|
|
ring_ref = priv->cfg->xtal / 1000;
|
|
|
|
n_ring = 15;
|
|
for (n = 0; n < 16; n++) {
|
|
if ((16 + n) * 8 * ring_ref >= 3100000) {
|
|
n_ring = n;
|
|
break;
|
|
}
|
|
}
|
|
|
|
reg18 = r820t_read_cache_reg(priv, 0x18);
|
|
reg19 = r820t_read_cache_reg(priv, 0x19);
|
|
reg1f = r820t_read_cache_reg(priv, 0x1f);
|
|
|
|
reg18 &= 0xf0; /* set ring[3:0] */
|
|
reg18 |= n_ring;
|
|
|
|
ring_vco = (16 + n_ring) * 8 * ring_ref;
|
|
|
|
reg18 &= 0xdf; /* clear ring_se23 */
|
|
reg19 &= 0xfc; /* clear ring_seldiv */
|
|
reg1f &= 0xfc; /* clear ring_att */
|
|
|
|
switch (imr_mem) {
|
|
case 0:
|
|
ring_freq = ring_vco / 48;
|
|
reg18 |= 0x20; /* ring_se23 = 1 */
|
|
reg19 |= 0x03; /* ring_seldiv = 3 */
|
|
reg1f |= 0x02; /* ring_att 10 */
|
|
break;
|
|
case 1:
|
|
ring_freq = ring_vco / 16;
|
|
reg18 |= 0x00; /* ring_se23 = 0 */
|
|
reg19 |= 0x02; /* ring_seldiv = 2 */
|
|
reg1f |= 0x00; /* pw_ring 00 */
|
|
break;
|
|
case 2:
|
|
ring_freq = ring_vco / 8;
|
|
reg18 |= 0x00; /* ring_se23 = 0 */
|
|
reg19 |= 0x01; /* ring_seldiv = 1 */
|
|
reg1f |= 0x03; /* pw_ring 11 */
|
|
break;
|
|
case 3:
|
|
ring_freq = ring_vco / 6;
|
|
reg18 |= 0x20; /* ring_se23 = 1 */
|
|
reg19 |= 0x00; /* ring_seldiv = 0 */
|
|
reg1f |= 0x03; /* pw_ring 11 */
|
|
break;
|
|
case 4:
|
|
ring_freq = ring_vco / 4;
|
|
reg18 |= 0x00; /* ring_se23 = 0 */
|
|
reg19 |= 0x00; /* ring_seldiv = 0 */
|
|
reg1f |= 0x01; /* pw_ring 01 */
|
|
break;
|
|
default:
|
|
ring_freq = ring_vco / 4;
|
|
reg18 |= 0x00; /* ring_se23 = 0 */
|
|
reg19 |= 0x00; /* ring_seldiv = 0 */
|
|
reg1f |= 0x01; /* pw_ring 01 */
|
|
break;
|
|
}
|
|
|
|
|
|
/* write pw_ring, n_ring, ringdiv2 registers */
|
|
|
|
/* n_ring, ring_se23 */
|
|
rc = r820t_write_reg(priv, 0x18, reg18);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* ring_sediv */
|
|
rc = r820t_write_reg(priv, 0x19, reg19);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* pw_ring */
|
|
rc = r820t_write_reg(priv, 0x1f, reg1f);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* mux input freq ~ rf_in freq */
|
|
rc = r820t_set_mux(priv, (ring_freq - 5300) * 1000);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
rc = r820t_set_pll(priv, V4L2_TUNER_DIGITAL_TV,
|
|
(ring_freq - 5300) * 1000);
|
|
if (!priv->has_lock)
|
|
rc = -EINVAL;
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
if (im_flag) {
|
|
rc = r820t_iq(priv, &imr_point);
|
|
} else {
|
|
imr_point.gain_x = priv->imr_data[3].gain_x;
|
|
imr_point.phase_y = priv->imr_data[3].phase_y;
|
|
imr_point.value = priv->imr_data[3].value;
|
|
|
|
rc = r820t_f_imr(priv, &imr_point);
|
|
}
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* save IMR value */
|
|
switch (imr_mem) {
|
|
case 0:
|
|
priv->imr_data[0].gain_x = imr_point.gain_x;
|
|
priv->imr_data[0].phase_y = imr_point.phase_y;
|
|
priv->imr_data[0].value = imr_point.value;
|
|
break;
|
|
case 1:
|
|
priv->imr_data[1].gain_x = imr_point.gain_x;
|
|
priv->imr_data[1].phase_y = imr_point.phase_y;
|
|
priv->imr_data[1].value = imr_point.value;
|
|
break;
|
|
case 2:
|
|
priv->imr_data[2].gain_x = imr_point.gain_x;
|
|
priv->imr_data[2].phase_y = imr_point.phase_y;
|
|
priv->imr_data[2].value = imr_point.value;
|
|
break;
|
|
case 3:
|
|
priv->imr_data[3].gain_x = imr_point.gain_x;
|
|
priv->imr_data[3].phase_y = imr_point.phase_y;
|
|
priv->imr_data[3].value = imr_point.value;
|
|
break;
|
|
case 4:
|
|
priv->imr_data[4].gain_x = imr_point.gain_x;
|
|
priv->imr_data[4].phase_y = imr_point.phase_y;
|
|
priv->imr_data[4].value = imr_point.value;
|
|
break;
|
|
default:
|
|
priv->imr_data[4].gain_x = imr_point.gain_x;
|
|
priv->imr_data[4].phase_y = imr_point.phase_y;
|
|
priv->imr_data[4].value = imr_point.value;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int r820t_imr_callibrate(struct r820t_priv *priv)
|
|
{
|
|
int rc, i;
|
|
int xtal_cap = 0;
|
|
|
|
if (priv->init_done)
|
|
return 0;
|
|
|
|
/* Detect Xtal capacitance */
|
|
if ((priv->cfg->rafael_chip == CHIP_R820T) ||
|
|
(priv->cfg->rafael_chip == CHIP_R828S) ||
|
|
(priv->cfg->rafael_chip == CHIP_R820C)) {
|
|
priv->xtal_cap_sel = XTAL_HIGH_CAP_0P;
|
|
} else {
|
|
/* Initialize registers */
|
|
rc = r820t_write(priv, 0x05,
|
|
r820t_init_array, sizeof(r820t_init_array));
|
|
if (rc < 0)
|
|
return rc;
|
|
for (i = 0; i < 3; i++) {
|
|
rc = r820t_xtal_check(priv);
|
|
if (rc < 0)
|
|
return rc;
|
|
if (!i || rc > xtal_cap)
|
|
xtal_cap = rc;
|
|
}
|
|
priv->xtal_cap_sel = xtal_cap;
|
|
}
|
|
|
|
/*
|
|
* Disables IMR calibration. That emulates the same behaviour
|
|
* as what is done by rtl-sdr userspace library. Useful for testing
|
|
*/
|
|
if (no_imr_cal) {
|
|
priv->init_done = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Initialize registers */
|
|
rc = r820t_write(priv, 0x05,
|
|
r820t_init_array, sizeof(r820t_init_array));
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
rc = r820t_imr_prepare(priv);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
rc = r820t_imr(priv, 3, true);
|
|
if (rc < 0)
|
|
return rc;
|
|
rc = r820t_imr(priv, 1, false);
|
|
if (rc < 0)
|
|
return rc;
|
|
rc = r820t_imr(priv, 0, false);
|
|
if (rc < 0)
|
|
return rc;
|
|
rc = r820t_imr(priv, 2, false);
|
|
if (rc < 0)
|
|
return rc;
|
|
rc = r820t_imr(priv, 4, false);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
priv->init_done = true;
|
|
priv->imr_done = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if 0
|
|
/* Not used, for now */
|
|
static int r820t_gpio(struct r820t_priv *priv, bool enable)
|
|
{
|
|
return r820t_write_reg_mask(priv, 0x0f, enable ? 1 : 0, 0x01);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* r820t frontend operations and tuner attach code
|
|
*
|
|
* All driver locks and i2c control are only in this part of the code
|
|
*/
|
|
|
|
static int r820t_init(struct dvb_frontend *fe)
|
|
{
|
|
struct r820t_priv *priv = fe->tuner_priv;
|
|
int rc;
|
|
|
|
tuner_dbg("%s:\n", __func__);
|
|
|
|
mutex_lock(&priv->lock);
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
|
|
rc = r820t_imr_callibrate(priv);
|
|
if (rc < 0)
|
|
goto err;
|
|
|
|
/* Initialize registers */
|
|
rc = r820t_write(priv, 0x05,
|
|
r820t_init_array, sizeof(r820t_init_array));
|
|
|
|
err:
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 0);
|
|
mutex_unlock(&priv->lock);
|
|
|
|
if (rc < 0)
|
|
tuner_dbg("%s: failed=%d\n", __func__, rc);
|
|
return rc;
|
|
}
|
|
|
|
static int r820t_sleep(struct dvb_frontend *fe)
|
|
{
|
|
struct r820t_priv *priv = fe->tuner_priv;
|
|
int rc;
|
|
|
|
tuner_dbg("%s:\n", __func__);
|
|
|
|
mutex_lock(&priv->lock);
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
|
|
rc = r820t_standby(priv);
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 0);
|
|
mutex_unlock(&priv->lock);
|
|
|
|
tuner_dbg("%s: failed=%d\n", __func__, rc);
|
|
return rc;
|
|
}
|
|
|
|
static int r820t_set_analog_freq(struct dvb_frontend *fe,
|
|
struct analog_parameters *p)
|
|
{
|
|
struct r820t_priv *priv = fe->tuner_priv;
|
|
unsigned bw;
|
|
int rc;
|
|
|
|
tuner_dbg("%s called\n", __func__);
|
|
|
|
/* if std is not defined, choose one */
|
|
if (!p->std)
|
|
p->std = V4L2_STD_MN;
|
|
|
|
if ((p->std == V4L2_STD_PAL_M) || (p->std == V4L2_STD_NTSC))
|
|
bw = 6;
|
|
else
|
|
bw = 8;
|
|
|
|
mutex_lock(&priv->lock);
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
|
|
rc = generic_set_freq(fe, 62500l * p->frequency, bw,
|
|
V4L2_TUNER_ANALOG_TV, p->std, SYS_UNDEFINED);
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 0);
|
|
mutex_unlock(&priv->lock);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int r820t_set_params(struct dvb_frontend *fe)
|
|
{
|
|
struct r820t_priv *priv = fe->tuner_priv;
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
int rc;
|
|
unsigned bw;
|
|
|
|
tuner_dbg("%s: delivery_system=%d frequency=%d bandwidth_hz=%d\n",
|
|
__func__, c->delivery_system, c->frequency, c->bandwidth_hz);
|
|
|
|
mutex_lock(&priv->lock);
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
|
|
bw = (c->bandwidth_hz + 500000) / 1000000;
|
|
if (!bw)
|
|
bw = 8;
|
|
|
|
rc = generic_set_freq(fe, c->frequency, bw,
|
|
V4L2_TUNER_DIGITAL_TV, 0, c->delivery_system);
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 0);
|
|
mutex_unlock(&priv->lock);
|
|
|
|
if (rc)
|
|
tuner_dbg("%s: failed=%d\n", __func__, rc);
|
|
return rc;
|
|
}
|
|
|
|
static int r820t_signal(struct dvb_frontend *fe, u16 *strength)
|
|
{
|
|
struct r820t_priv *priv = fe->tuner_priv;
|
|
int rc = 0;
|
|
|
|
mutex_lock(&priv->lock);
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
|
|
if (priv->has_lock) {
|
|
rc = r820t_read_gain(priv);
|
|
if (rc < 0)
|
|
goto err;
|
|
|
|
/* A higher gain at LNA means a lower signal strength */
|
|
*strength = (45 - rc) << 4 | 0xff;
|
|
if (*strength == 0xff)
|
|
*strength = 0;
|
|
} else {
|
|
*strength = 0;
|
|
}
|
|
|
|
err:
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 0);
|
|
mutex_unlock(&priv->lock);
|
|
|
|
tuner_dbg("%s: %s, gain=%d strength=%d\n",
|
|
__func__,
|
|
priv->has_lock ? "PLL locked" : "no signal",
|
|
rc, *strength);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int r820t_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
|
|
{
|
|
struct r820t_priv *priv = fe->tuner_priv;
|
|
|
|
tuner_dbg("%s:\n", __func__);
|
|
|
|
*frequency = priv->int_freq;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void r820t_release(struct dvb_frontend *fe)
|
|
{
|
|
struct r820t_priv *priv = fe->tuner_priv;
|
|
|
|
tuner_dbg("%s:\n", __func__);
|
|
|
|
mutex_lock(&r820t_list_mutex);
|
|
|
|
if (priv)
|
|
hybrid_tuner_release_state(priv);
|
|
|
|
mutex_unlock(&r820t_list_mutex);
|
|
|
|
fe->tuner_priv = NULL;
|
|
}
|
|
|
|
static const struct dvb_tuner_ops r820t_tuner_ops = {
|
|
.info = {
|
|
.name = "Rafael Micro R820T",
|
|
.frequency_min_hz = 42 * MHz,
|
|
.frequency_max_hz = 1002 * MHz,
|
|
},
|
|
.init = r820t_init,
|
|
.release = r820t_release,
|
|
.sleep = r820t_sleep,
|
|
.set_params = r820t_set_params,
|
|
.set_analog_params = r820t_set_analog_freq,
|
|
.get_if_frequency = r820t_get_if_frequency,
|
|
.get_rf_strength = r820t_signal,
|
|
};
|
|
|
|
struct dvb_frontend *r820t_attach(struct dvb_frontend *fe,
|
|
struct i2c_adapter *i2c,
|
|
const struct r820t_config *cfg)
|
|
{
|
|
struct r820t_priv *priv;
|
|
int rc = -ENODEV;
|
|
u8 data[5];
|
|
int instance;
|
|
|
|
mutex_lock(&r820t_list_mutex);
|
|
|
|
instance = hybrid_tuner_request_state(struct r820t_priv, priv,
|
|
hybrid_tuner_instance_list,
|
|
i2c, cfg->i2c_addr,
|
|
"r820t");
|
|
switch (instance) {
|
|
case 0:
|
|
/* memory allocation failure */
|
|
goto err_no_gate;
|
|
case 1:
|
|
/* new tuner instance */
|
|
priv->cfg = cfg;
|
|
|
|
mutex_init(&priv->lock);
|
|
|
|
fe->tuner_priv = priv;
|
|
break;
|
|
case 2:
|
|
/* existing tuner instance */
|
|
fe->tuner_priv = priv;
|
|
break;
|
|
}
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
|
|
/* check if the tuner is there */
|
|
rc = r820t_read(priv, 0x00, data, sizeof(data));
|
|
if (rc < 0)
|
|
goto err;
|
|
|
|
rc = r820t_sleep(fe);
|
|
if (rc < 0)
|
|
goto err;
|
|
|
|
tuner_info("Rafael Micro r820t successfully identified\n");
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 0);
|
|
|
|
mutex_unlock(&r820t_list_mutex);
|
|
|
|
memcpy(&fe->ops.tuner_ops, &r820t_tuner_ops,
|
|
sizeof(struct dvb_tuner_ops));
|
|
|
|
return fe;
|
|
err:
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 0);
|
|
|
|
err_no_gate:
|
|
mutex_unlock(&r820t_list_mutex);
|
|
|
|
pr_info("%s: failed=%d\n", __func__, rc);
|
|
r820t_release(fe);
|
|
return NULL;
|
|
}
|
|
EXPORT_SYMBOL_GPL(r820t_attach);
|
|
|
|
MODULE_DESCRIPTION("Rafael Micro r820t silicon tuner driver");
|
|
MODULE_AUTHOR("Mauro Carvalho Chehab");
|
|
MODULE_LICENSE("GPL v2");
|