forked from luck/tmp_suning_uos_patched
32d174d2d5
If the function platform_get_irq() failed, the negative value
returned will not be detected here. So fix error handling in
tegra_ehci_probe().
Fixes: 79ad3b5add
("usb: host: Add EHCI driver for NVIDIA Tegra SoCs")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20201026090657.49988-1-tangbin@cmss.chinamobile.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
605 lines
15 KiB
C
605 lines
15 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* EHCI-compliant USB host controller driver for NVIDIA Tegra SoCs
|
|
*
|
|
* Copyright (C) 2010 Google, Inc.
|
|
* Copyright (C) 2009 - 2013 NVIDIA Corporation
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/err.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/io.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/usb/ehci_def.h>
|
|
#include <linux/usb/tegra_usb_phy.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/hcd.h>
|
|
#include <linux/usb/otg.h>
|
|
|
|
#include "ehci.h"
|
|
|
|
#define PORT_WAKE_BITS (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
|
|
|
|
#define TEGRA_USB_DMA_ALIGN 32
|
|
|
|
#define DRIVER_DESC "Tegra EHCI driver"
|
|
#define DRV_NAME "tegra-ehci"
|
|
|
|
static struct hc_driver __read_mostly tegra_ehci_hc_driver;
|
|
|
|
struct tegra_ehci_soc_config {
|
|
bool has_hostpc;
|
|
};
|
|
|
|
struct tegra_ehci_hcd {
|
|
struct clk *clk;
|
|
struct reset_control *rst;
|
|
int port_resuming;
|
|
bool needs_double_reset;
|
|
};
|
|
|
|
static int tegra_reset_usb_controller(struct platform_device *pdev)
|
|
{
|
|
struct device_node *phy_np;
|
|
struct usb_hcd *hcd = platform_get_drvdata(pdev);
|
|
struct tegra_ehci_hcd *tegra =
|
|
(struct tegra_ehci_hcd *)hcd_to_ehci(hcd)->priv;
|
|
struct reset_control *rst;
|
|
int err;
|
|
|
|
phy_np = of_parse_phandle(pdev->dev.of_node, "nvidia,phy", 0);
|
|
if (!phy_np)
|
|
return -ENOENT;
|
|
|
|
/*
|
|
* The 1st USB controller contains some UTMI pad registers that are
|
|
* global for all the controllers on the chip. Those registers are
|
|
* also cleared when reset is asserted to the 1st controller.
|
|
*/
|
|
rst = of_reset_control_get_shared(phy_np, "utmi-pads");
|
|
if (IS_ERR(rst)) {
|
|
dev_warn(&pdev->dev,
|
|
"can't get utmi-pads reset from the PHY\n");
|
|
dev_warn(&pdev->dev,
|
|
"continuing, but please update your DT\n");
|
|
} else {
|
|
/*
|
|
* PHY driver performs UTMI-pads reset in a case of
|
|
* non-legacy DT.
|
|
*/
|
|
reset_control_put(rst);
|
|
}
|
|
|
|
of_node_put(phy_np);
|
|
|
|
/* reset control is shared, hence initialize it first */
|
|
err = reset_control_deassert(tegra->rst);
|
|
if (err)
|
|
return err;
|
|
|
|
err = reset_control_assert(tegra->rst);
|
|
if (err)
|
|
return err;
|
|
|
|
udelay(1);
|
|
|
|
err = reset_control_deassert(tegra->rst);
|
|
if (err)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra_ehci_internal_port_reset(
|
|
struct ehci_hcd *ehci,
|
|
u32 __iomem *portsc_reg
|
|
)
|
|
{
|
|
u32 temp;
|
|
unsigned long flags;
|
|
int retval = 0;
|
|
int i, tries;
|
|
u32 saved_usbintr;
|
|
|
|
spin_lock_irqsave(&ehci->lock, flags);
|
|
saved_usbintr = ehci_readl(ehci, &ehci->regs->intr_enable);
|
|
/* disable USB interrupt */
|
|
ehci_writel(ehci, 0, &ehci->regs->intr_enable);
|
|
spin_unlock_irqrestore(&ehci->lock, flags);
|
|
|
|
/*
|
|
* Here we have to do Port Reset at most twice for
|
|
* Port Enable bit to be set.
|
|
*/
|
|
for (i = 0; i < 2; i++) {
|
|
temp = ehci_readl(ehci, portsc_reg);
|
|
temp |= PORT_RESET;
|
|
ehci_writel(ehci, temp, portsc_reg);
|
|
mdelay(10);
|
|
temp &= ~PORT_RESET;
|
|
ehci_writel(ehci, temp, portsc_reg);
|
|
mdelay(1);
|
|
tries = 100;
|
|
do {
|
|
mdelay(1);
|
|
/*
|
|
* Up to this point, Port Enable bit is
|
|
* expected to be set after 2 ms waiting.
|
|
* USB1 usually takes extra 45 ms, for safety,
|
|
* we take 100 ms as timeout.
|
|
*/
|
|
temp = ehci_readl(ehci, portsc_reg);
|
|
} while (!(temp & PORT_PE) && tries--);
|
|
if (temp & PORT_PE)
|
|
break;
|
|
}
|
|
if (i == 2)
|
|
retval = -ETIMEDOUT;
|
|
|
|
/*
|
|
* Clear Connect Status Change bit if it's set.
|
|
* We can't clear PORT_PEC. It will also cause PORT_PE to be cleared.
|
|
*/
|
|
if (temp & PORT_CSC)
|
|
ehci_writel(ehci, PORT_CSC, portsc_reg);
|
|
|
|
/*
|
|
* Write to clear any interrupt status bits that might be set
|
|
* during port reset.
|
|
*/
|
|
temp = ehci_readl(ehci, &ehci->regs->status);
|
|
ehci_writel(ehci, temp, &ehci->regs->status);
|
|
|
|
/* restore original interrupt enable bits */
|
|
ehci_writel(ehci, saved_usbintr, &ehci->regs->intr_enable);
|
|
return retval;
|
|
}
|
|
|
|
static int tegra_ehci_hub_control(
|
|
struct usb_hcd *hcd,
|
|
u16 typeReq,
|
|
u16 wValue,
|
|
u16 wIndex,
|
|
char *buf,
|
|
u16 wLength
|
|
)
|
|
{
|
|
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
|
|
struct tegra_ehci_hcd *tegra = (struct tegra_ehci_hcd *)ehci->priv;
|
|
u32 __iomem *status_reg;
|
|
u32 temp;
|
|
unsigned long flags;
|
|
int retval = 0;
|
|
|
|
status_reg = &ehci->regs->port_status[(wIndex & 0xff) - 1];
|
|
|
|
spin_lock_irqsave(&ehci->lock, flags);
|
|
|
|
if (typeReq == GetPortStatus) {
|
|
temp = ehci_readl(ehci, status_reg);
|
|
if (tegra->port_resuming && !(temp & PORT_SUSPEND)) {
|
|
/* Resume completed, re-enable disconnect detection */
|
|
tegra->port_resuming = 0;
|
|
tegra_usb_phy_postresume(hcd->usb_phy);
|
|
}
|
|
}
|
|
|
|
else if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND) {
|
|
temp = ehci_readl(ehci, status_reg);
|
|
if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) {
|
|
retval = -EPIPE;
|
|
goto done;
|
|
}
|
|
|
|
temp &= ~(PORT_RWC_BITS | PORT_WKCONN_E);
|
|
temp |= PORT_WKDISC_E | PORT_WKOC_E;
|
|
ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
|
|
|
|
/*
|
|
* If a transaction is in progress, there may be a delay in
|
|
* suspending the port. Poll until the port is suspended.
|
|
*/
|
|
if (ehci_handshake(ehci, status_reg, PORT_SUSPEND,
|
|
PORT_SUSPEND, 5000))
|
|
pr_err("%s: timeout waiting for SUSPEND\n", __func__);
|
|
|
|
set_bit((wIndex & 0xff) - 1, &ehci->suspended_ports);
|
|
goto done;
|
|
}
|
|
|
|
/* For USB1 port we need to issue Port Reset twice internally */
|
|
if (tegra->needs_double_reset &&
|
|
(typeReq == SetPortFeature && wValue == USB_PORT_FEAT_RESET)) {
|
|
spin_unlock_irqrestore(&ehci->lock, flags);
|
|
return tegra_ehci_internal_port_reset(ehci, status_reg);
|
|
}
|
|
|
|
/*
|
|
* Tegra host controller will time the resume operation to clear the bit
|
|
* when the port control state switches to HS or FS Idle. This behavior
|
|
* is different from EHCI where the host controller driver is required
|
|
* to set this bit to a zero after the resume duration is timed in the
|
|
* driver.
|
|
*/
|
|
else if (typeReq == ClearPortFeature &&
|
|
wValue == USB_PORT_FEAT_SUSPEND) {
|
|
temp = ehci_readl(ehci, status_reg);
|
|
if ((temp & PORT_RESET) || !(temp & PORT_PE)) {
|
|
retval = -EPIPE;
|
|
goto done;
|
|
}
|
|
|
|
if (!(temp & PORT_SUSPEND))
|
|
goto done;
|
|
|
|
/* Disable disconnect detection during port resume */
|
|
tegra_usb_phy_preresume(hcd->usb_phy);
|
|
|
|
ehci->reset_done[wIndex-1] = jiffies + msecs_to_jiffies(25);
|
|
|
|
temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
|
|
/* start resume signalling */
|
|
ehci_writel(ehci, temp | PORT_RESUME, status_reg);
|
|
set_bit(wIndex-1, &ehci->resuming_ports);
|
|
|
|
spin_unlock_irqrestore(&ehci->lock, flags);
|
|
msleep(20);
|
|
spin_lock_irqsave(&ehci->lock, flags);
|
|
|
|
/* Poll until the controller clears RESUME and SUSPEND */
|
|
if (ehci_handshake(ehci, status_reg, PORT_RESUME, 0, 2000))
|
|
pr_err("%s: timeout waiting for RESUME\n", __func__);
|
|
if (ehci_handshake(ehci, status_reg, PORT_SUSPEND, 0, 2000))
|
|
pr_err("%s: timeout waiting for SUSPEND\n", __func__);
|
|
|
|
ehci->reset_done[wIndex-1] = 0;
|
|
clear_bit(wIndex-1, &ehci->resuming_ports);
|
|
|
|
tegra->port_resuming = 1;
|
|
goto done;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&ehci->lock, flags);
|
|
|
|
/* Handle the hub control events here */
|
|
return ehci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
|
|
|
|
done:
|
|
spin_unlock_irqrestore(&ehci->lock, flags);
|
|
return retval;
|
|
}
|
|
|
|
struct dma_aligned_buffer {
|
|
void *kmalloc_ptr;
|
|
void *old_xfer_buffer;
|
|
u8 data[];
|
|
};
|
|
|
|
static void free_dma_aligned_buffer(struct urb *urb)
|
|
{
|
|
struct dma_aligned_buffer *temp;
|
|
size_t length;
|
|
|
|
if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER))
|
|
return;
|
|
|
|
temp = container_of(urb->transfer_buffer,
|
|
struct dma_aligned_buffer, data);
|
|
|
|
if (usb_urb_dir_in(urb)) {
|
|
if (usb_pipeisoc(urb->pipe))
|
|
length = urb->transfer_buffer_length;
|
|
else
|
|
length = urb->actual_length;
|
|
|
|
memcpy(temp->old_xfer_buffer, temp->data, length);
|
|
}
|
|
urb->transfer_buffer = temp->old_xfer_buffer;
|
|
kfree(temp->kmalloc_ptr);
|
|
|
|
urb->transfer_flags &= ~URB_ALIGNED_TEMP_BUFFER;
|
|
}
|
|
|
|
static int alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags)
|
|
{
|
|
struct dma_aligned_buffer *temp, *kmalloc_ptr;
|
|
size_t kmalloc_size;
|
|
|
|
if (urb->num_sgs || urb->sg ||
|
|
urb->transfer_buffer_length == 0 ||
|
|
!((uintptr_t)urb->transfer_buffer & (TEGRA_USB_DMA_ALIGN - 1)))
|
|
return 0;
|
|
|
|
/* Allocate a buffer with enough padding for alignment */
|
|
kmalloc_size = urb->transfer_buffer_length +
|
|
sizeof(struct dma_aligned_buffer) + TEGRA_USB_DMA_ALIGN - 1;
|
|
|
|
kmalloc_ptr = kmalloc(kmalloc_size, mem_flags);
|
|
if (!kmalloc_ptr)
|
|
return -ENOMEM;
|
|
|
|
/* Position our struct dma_aligned_buffer such that data is aligned */
|
|
temp = PTR_ALIGN(kmalloc_ptr + 1, TEGRA_USB_DMA_ALIGN) - 1;
|
|
temp->kmalloc_ptr = kmalloc_ptr;
|
|
temp->old_xfer_buffer = urb->transfer_buffer;
|
|
if (usb_urb_dir_out(urb))
|
|
memcpy(temp->data, urb->transfer_buffer,
|
|
urb->transfer_buffer_length);
|
|
urb->transfer_buffer = temp->data;
|
|
|
|
urb->transfer_flags |= URB_ALIGNED_TEMP_BUFFER;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra_ehci_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
|
|
gfp_t mem_flags)
|
|
{
|
|
int ret;
|
|
|
|
ret = alloc_dma_aligned_buffer(urb, mem_flags);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = usb_hcd_map_urb_for_dma(hcd, urb, mem_flags);
|
|
if (ret)
|
|
free_dma_aligned_buffer(urb);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void tegra_ehci_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
|
|
{
|
|
usb_hcd_unmap_urb_for_dma(hcd, urb);
|
|
free_dma_aligned_buffer(urb);
|
|
}
|
|
|
|
static const struct tegra_ehci_soc_config tegra30_soc_config = {
|
|
.has_hostpc = true,
|
|
};
|
|
|
|
static const struct tegra_ehci_soc_config tegra20_soc_config = {
|
|
.has_hostpc = false,
|
|
};
|
|
|
|
static const struct of_device_id tegra_ehci_of_match[] = {
|
|
{ .compatible = "nvidia,tegra30-ehci", .data = &tegra30_soc_config },
|
|
{ .compatible = "nvidia,tegra20-ehci", .data = &tegra20_soc_config },
|
|
{ },
|
|
};
|
|
|
|
static int tegra_ehci_probe(struct platform_device *pdev)
|
|
{
|
|
const struct of_device_id *match;
|
|
const struct tegra_ehci_soc_config *soc_config;
|
|
struct resource *res;
|
|
struct usb_hcd *hcd;
|
|
struct ehci_hcd *ehci;
|
|
struct tegra_ehci_hcd *tegra;
|
|
int err = 0;
|
|
int irq;
|
|
struct usb_phy *u_phy;
|
|
|
|
match = of_match_device(tegra_ehci_of_match, &pdev->dev);
|
|
if (!match) {
|
|
dev_err(&pdev->dev, "Error: No device match found\n");
|
|
return -ENODEV;
|
|
}
|
|
soc_config = match->data;
|
|
|
|
/* Right now device-tree probed devices don't get dma_mask set.
|
|
* Since shared usb code relies on it, set it here for now.
|
|
* Once we have dma capability bindings this can go away.
|
|
*/
|
|
err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
|
|
if (err)
|
|
return err;
|
|
|
|
hcd = usb_create_hcd(&tegra_ehci_hc_driver, &pdev->dev,
|
|
dev_name(&pdev->dev));
|
|
if (!hcd) {
|
|
dev_err(&pdev->dev, "Unable to create HCD\n");
|
|
return -ENOMEM;
|
|
}
|
|
platform_set_drvdata(pdev, hcd);
|
|
ehci = hcd_to_ehci(hcd);
|
|
tegra = (struct tegra_ehci_hcd *)ehci->priv;
|
|
|
|
hcd->has_tt = 1;
|
|
|
|
tegra->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(tegra->clk)) {
|
|
dev_err(&pdev->dev, "Can't get ehci clock\n");
|
|
err = PTR_ERR(tegra->clk);
|
|
goto cleanup_hcd_create;
|
|
}
|
|
|
|
tegra->rst = devm_reset_control_get_shared(&pdev->dev, "usb");
|
|
if (IS_ERR(tegra->rst)) {
|
|
dev_err(&pdev->dev, "Can't get ehci reset\n");
|
|
err = PTR_ERR(tegra->rst);
|
|
goto cleanup_hcd_create;
|
|
}
|
|
|
|
err = clk_prepare_enable(tegra->clk);
|
|
if (err)
|
|
goto cleanup_hcd_create;
|
|
|
|
err = tegra_reset_usb_controller(pdev);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "Failed to reset controller\n");
|
|
goto cleanup_clk_en;
|
|
}
|
|
|
|
u_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "nvidia,phy", 0);
|
|
if (IS_ERR(u_phy)) {
|
|
err = -EPROBE_DEFER;
|
|
goto cleanup_clk_en;
|
|
}
|
|
hcd->usb_phy = u_phy;
|
|
hcd->skip_phy_initialization = 1;
|
|
|
|
tegra->needs_double_reset = of_property_read_bool(pdev->dev.of_node,
|
|
"nvidia,needs-double-reset");
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
hcd->regs = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(hcd->regs)) {
|
|
err = PTR_ERR(hcd->regs);
|
|
goto cleanup_clk_en;
|
|
}
|
|
hcd->rsrc_start = res->start;
|
|
hcd->rsrc_len = resource_size(res);
|
|
|
|
ehci->caps = hcd->regs + 0x100;
|
|
ehci->has_hostpc = soc_config->has_hostpc;
|
|
|
|
err = usb_phy_init(hcd->usb_phy);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "Failed to initialize phy\n");
|
|
goto cleanup_clk_en;
|
|
}
|
|
|
|
u_phy->otg = devm_kzalloc(&pdev->dev, sizeof(struct usb_otg),
|
|
GFP_KERNEL);
|
|
if (!u_phy->otg) {
|
|
err = -ENOMEM;
|
|
goto cleanup_phy;
|
|
}
|
|
u_phy->otg->host = hcd_to_bus(hcd);
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0) {
|
|
err = irq;
|
|
goto cleanup_phy;
|
|
}
|
|
|
|
otg_set_host(u_phy->otg, &hcd->self);
|
|
|
|
err = usb_add_hcd(hcd, irq, IRQF_SHARED);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "Failed to add USB HCD\n");
|
|
goto cleanup_otg_set_host;
|
|
}
|
|
device_wakeup_enable(hcd->self.controller);
|
|
|
|
return err;
|
|
|
|
cleanup_otg_set_host:
|
|
otg_set_host(u_phy->otg, NULL);
|
|
cleanup_phy:
|
|
usb_phy_shutdown(hcd->usb_phy);
|
|
cleanup_clk_en:
|
|
clk_disable_unprepare(tegra->clk);
|
|
cleanup_hcd_create:
|
|
usb_put_hcd(hcd);
|
|
return err;
|
|
}
|
|
|
|
static int tegra_ehci_remove(struct platform_device *pdev)
|
|
{
|
|
struct usb_hcd *hcd = platform_get_drvdata(pdev);
|
|
struct tegra_ehci_hcd *tegra =
|
|
(struct tegra_ehci_hcd *)hcd_to_ehci(hcd)->priv;
|
|
|
|
usb_remove_hcd(hcd);
|
|
otg_set_host(hcd->usb_phy->otg, NULL);
|
|
usb_phy_shutdown(hcd->usb_phy);
|
|
clk_disable_unprepare(tegra->clk);
|
|
usb_put_hcd(hcd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void tegra_ehci_hcd_shutdown(struct platform_device *pdev)
|
|
{
|
|
struct usb_hcd *hcd = platform_get_drvdata(pdev);
|
|
|
|
if (hcd->driver->shutdown)
|
|
hcd->driver->shutdown(hcd);
|
|
}
|
|
|
|
static struct platform_driver tegra_ehci_driver = {
|
|
.probe = tegra_ehci_probe,
|
|
.remove = tegra_ehci_remove,
|
|
.shutdown = tegra_ehci_hcd_shutdown,
|
|
.driver = {
|
|
.name = DRV_NAME,
|
|
.of_match_table = tegra_ehci_of_match,
|
|
}
|
|
};
|
|
|
|
static int tegra_ehci_reset(struct usb_hcd *hcd)
|
|
{
|
|
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
|
|
int retval;
|
|
int txfifothresh;
|
|
|
|
retval = ehci_setup(hcd);
|
|
if (retval)
|
|
return retval;
|
|
|
|
/*
|
|
* We should really pull this value out of tegra_ehci_soc_config, but
|
|
* to avoid needing access to it, make use of the fact that Tegra20 is
|
|
* the only one so far that needs a value of 10, and Tegra20 is the
|
|
* only one which doesn't set has_hostpc.
|
|
*/
|
|
txfifothresh = ehci->has_hostpc ? 0x10 : 10;
|
|
ehci_writel(ehci, txfifothresh << 16, &ehci->regs->txfill_tuning);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct ehci_driver_overrides tegra_overrides __initconst = {
|
|
.extra_priv_size = sizeof(struct tegra_ehci_hcd),
|
|
.reset = tegra_ehci_reset,
|
|
};
|
|
|
|
static int __init ehci_tegra_init(void)
|
|
{
|
|
if (usb_disabled())
|
|
return -ENODEV;
|
|
|
|
pr_info(DRV_NAME ": " DRIVER_DESC "\n");
|
|
|
|
ehci_init_driver(&tegra_ehci_hc_driver, &tegra_overrides);
|
|
|
|
/*
|
|
* The Tegra HW has some unusual quirks, which require Tegra-specific
|
|
* workarounds. We override certain hc_driver functions here to
|
|
* achieve that. We explicitly do not enhance ehci_driver_overrides to
|
|
* allow this more easily, since this is an unusual case, and we don't
|
|
* want to encourage others to override these functions by making it
|
|
* too easy.
|
|
*/
|
|
|
|
tegra_ehci_hc_driver.map_urb_for_dma = tegra_ehci_map_urb_for_dma;
|
|
tegra_ehci_hc_driver.unmap_urb_for_dma = tegra_ehci_unmap_urb_for_dma;
|
|
tegra_ehci_hc_driver.hub_control = tegra_ehci_hub_control;
|
|
|
|
return platform_driver_register(&tegra_ehci_driver);
|
|
}
|
|
module_init(ehci_tegra_init);
|
|
|
|
static void __exit ehci_tegra_cleanup(void)
|
|
{
|
|
platform_driver_unregister(&tegra_ehci_driver);
|
|
}
|
|
module_exit(ehci_tegra_cleanup);
|
|
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:" DRV_NAME);
|
|
MODULE_DEVICE_TABLE(of, tegra_ehci_of_match);
|