kernel_optimize_test/drivers/mmc/host
Linus Walleij c8df9a53e8 [ARM] 5024/1: Fix some minor clk issues in the MMCI PL18x driver
This fixes some two minor clk issues.

The first is a comparison where a byte will probably wrap around to 0 instead of being saturated to 255, shouldn't be triggered very often but need fixing.

The second is an attempt by the driver to adjust MCLK down to the maximum frequency according to the spec, so we don't accidentally overclock the PL18x block. None of the mach-{versatile|integrator|lh7a40x} that use it in-tree seem to have a problem with this (all are well below 100MHz, typically 33MHz), but some day there will be a problem.

This is not applied on top of the earlier mmci patch for race condition but rather a clean 2.6.25, but I guess it applies without major protests anyway.

Signed-off-by: Linus Walleij <triad@df.lth.se>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-04 11:06:05 +01:00
..
at91_mci.c mmc: fix platform driver hotplug/coldplug 2008-04-15 19:35:40 -07:00
au1xmmc.c mmc: fix platform driver hotplug/coldplug 2008-04-15 19:35:40 -07:00
au1xmmc.h mmc: Move host and card drivers to subdirs 2007-05-01 13:04:17 +02:00
imxmmc.c mmc: fix platform driver hotplug/coldplug 2008-04-15 19:35:40 -07:00
imxmmc.h mmc: Move host and card drivers to subdirs 2007-05-01 13:04:17 +02:00
Kconfig mmc: remove sdhci and mmc_spi experimental markers 2008-02-08 09:02:46 +01:00
Makefile mmc: Disabler for Ricoh MMC controller 2007-10-03 18:40:05 +02:00
mmc_spi.c mmc: use get/put_unaligned_* helpers 2008-04-29 08:06:27 -07:00
mmci.c [ARM] 5024/1: Fix some minor clk issues in the MMCI PL18x driver 2008-05-04 11:06:05 +01:00
mmci.h mmc: fix sg->page fallout 2007-10-23 20:37:24 +02:00
omap.c MMC: OMAP: Do not busy wait for end of command for ever 2008-04-18 20:05:31 +02:00
pxamci.c mmc: fix platform driver hotplug/coldplug 2008-04-15 19:35:40 -07:00
pxamci.h [ARM] pxa: mmc: add 1st host controller support for pxa3xx 2008-01-26 15:07:53 +00:00
ricoh_mmc.c mmc: extend ricoh_mmc to support Ricoh RL5c476 2008-02-08 09:02:47 +01:00
sdhci.c sdhci: improve no card, no reset quirk 2008-04-18 20:05:31 +02:00
sdhci.h sdhci: allow led to be controlled freely 2008-04-18 20:05:27 +02:00
tifm_sd.c tifm_sd: DATA_CARRY is not boolean in tifm_sd_transfer_data() 2008-03-15 09:24:21 -07:00
wbsd.c mmc: fix platform driver hotplug/coldplug 2008-04-15 19:35:40 -07:00
wbsd.h mmc: update header file paths 2007-07-26 01:53:31 +02:00