forked from luck/tmp_suning_uos_patched
cea931c251
The DM365 platform has a strange quirk (only present when using ancient u-boot - mainline u-boot v2013.01 and later works fine) where if we enable the second half of the timer in periodic mode before we do its initialization - the time won't start flowing and we can't boot. When using more recent u-boot, we can enable the timer, then reinitialize it and all works fine. To work around this issue only enable clockevents once tim34 is initialized i.e. move clockevents_config_and_register() below tim34 initialization. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
370 lines
9.7 KiB
C
370 lines
9.7 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* TI DaVinci clocksource driver
|
|
*
|
|
* Copyright (C) 2019 Texas Instruments
|
|
* Author: Bartosz Golaszewski <bgolaszewski@baylibre.com>
|
|
* (with tiny parts adopted from code by Kevin Hilman <khilman@baylibre.com>)
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/clockchips.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/sched_clock.h>
|
|
|
|
#include <clocksource/timer-davinci.h>
|
|
|
|
#undef pr_fmt
|
|
#define pr_fmt(fmt) "%s: " fmt "\n", __func__
|
|
|
|
#define DAVINCI_TIMER_REG_TIM12 0x10
|
|
#define DAVINCI_TIMER_REG_TIM34 0x14
|
|
#define DAVINCI_TIMER_REG_PRD12 0x18
|
|
#define DAVINCI_TIMER_REG_PRD34 0x1c
|
|
#define DAVINCI_TIMER_REG_TCR 0x20
|
|
#define DAVINCI_TIMER_REG_TGCR 0x24
|
|
|
|
#define DAVINCI_TIMER_TIMMODE_MASK GENMASK(3, 2)
|
|
#define DAVINCI_TIMER_RESET_MASK GENMASK(1, 0)
|
|
#define DAVINCI_TIMER_TIMMODE_32BIT_UNCHAINED BIT(2)
|
|
#define DAVINCI_TIMER_UNRESET GENMASK(1, 0)
|
|
|
|
#define DAVINCI_TIMER_ENAMODE_MASK GENMASK(1, 0)
|
|
#define DAVINCI_TIMER_ENAMODE_DISABLED 0x00
|
|
#define DAVINCI_TIMER_ENAMODE_ONESHOT BIT(0)
|
|
#define DAVINCI_TIMER_ENAMODE_PERIODIC BIT(1)
|
|
|
|
#define DAVINCI_TIMER_ENAMODE_SHIFT_TIM12 6
|
|
#define DAVINCI_TIMER_ENAMODE_SHIFT_TIM34 22
|
|
|
|
#define DAVINCI_TIMER_MIN_DELTA 0x01
|
|
#define DAVINCI_TIMER_MAX_DELTA 0xfffffffe
|
|
|
|
#define DAVINCI_TIMER_CLKSRC_BITS 32
|
|
|
|
#define DAVINCI_TIMER_TGCR_DEFAULT \
|
|
(DAVINCI_TIMER_TIMMODE_32BIT_UNCHAINED | DAVINCI_TIMER_UNRESET)
|
|
|
|
struct davinci_clockevent {
|
|
struct clock_event_device dev;
|
|
void __iomem *base;
|
|
unsigned int cmp_off;
|
|
};
|
|
|
|
/*
|
|
* This must be globally accessible by davinci_timer_read_sched_clock(), so
|
|
* let's keep it here.
|
|
*/
|
|
static struct {
|
|
struct clocksource dev;
|
|
void __iomem *base;
|
|
unsigned int tim_off;
|
|
} davinci_clocksource;
|
|
|
|
static struct davinci_clockevent *
|
|
to_davinci_clockevent(struct clock_event_device *clockevent)
|
|
{
|
|
return container_of(clockevent, struct davinci_clockevent, dev);
|
|
}
|
|
|
|
static unsigned int
|
|
davinci_clockevent_read(struct davinci_clockevent *clockevent,
|
|
unsigned int reg)
|
|
{
|
|
return readl_relaxed(clockevent->base + reg);
|
|
}
|
|
|
|
static void davinci_clockevent_write(struct davinci_clockevent *clockevent,
|
|
unsigned int reg, unsigned int val)
|
|
{
|
|
writel_relaxed(val, clockevent->base + reg);
|
|
}
|
|
|
|
static void davinci_tim12_shutdown(void __iomem *base)
|
|
{
|
|
unsigned int tcr;
|
|
|
|
tcr = DAVINCI_TIMER_ENAMODE_DISABLED <<
|
|
DAVINCI_TIMER_ENAMODE_SHIFT_TIM12;
|
|
/*
|
|
* This function is only ever called if we're using both timer
|
|
* halves. In this case TIM34 runs in periodic mode and we must
|
|
* not modify it.
|
|
*/
|
|
tcr |= DAVINCI_TIMER_ENAMODE_PERIODIC <<
|
|
DAVINCI_TIMER_ENAMODE_SHIFT_TIM34;
|
|
|
|
writel_relaxed(tcr, base + DAVINCI_TIMER_REG_TCR);
|
|
}
|
|
|
|
static void davinci_tim12_set_oneshot(void __iomem *base)
|
|
{
|
|
unsigned int tcr;
|
|
|
|
tcr = DAVINCI_TIMER_ENAMODE_ONESHOT <<
|
|
DAVINCI_TIMER_ENAMODE_SHIFT_TIM12;
|
|
/* Same as above. */
|
|
tcr |= DAVINCI_TIMER_ENAMODE_PERIODIC <<
|
|
DAVINCI_TIMER_ENAMODE_SHIFT_TIM34;
|
|
|
|
writel_relaxed(tcr, base + DAVINCI_TIMER_REG_TCR);
|
|
}
|
|
|
|
static int davinci_clockevent_shutdown(struct clock_event_device *dev)
|
|
{
|
|
struct davinci_clockevent *clockevent;
|
|
|
|
clockevent = to_davinci_clockevent(dev);
|
|
|
|
davinci_tim12_shutdown(clockevent->base);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int davinci_clockevent_set_oneshot(struct clock_event_device *dev)
|
|
{
|
|
struct davinci_clockevent *clockevent = to_davinci_clockevent(dev);
|
|
|
|
davinci_clockevent_write(clockevent, DAVINCI_TIMER_REG_TIM12, 0x0);
|
|
|
|
davinci_tim12_set_oneshot(clockevent->base);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
davinci_clockevent_set_next_event_std(unsigned long cycles,
|
|
struct clock_event_device *dev)
|
|
{
|
|
struct davinci_clockevent *clockevent = to_davinci_clockevent(dev);
|
|
|
|
davinci_clockevent_shutdown(dev);
|
|
|
|
davinci_clockevent_write(clockevent, DAVINCI_TIMER_REG_TIM12, 0x0);
|
|
davinci_clockevent_write(clockevent, DAVINCI_TIMER_REG_PRD12, cycles);
|
|
|
|
davinci_clockevent_set_oneshot(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
davinci_clockevent_set_next_event_cmp(unsigned long cycles,
|
|
struct clock_event_device *dev)
|
|
{
|
|
struct davinci_clockevent *clockevent = to_davinci_clockevent(dev);
|
|
unsigned int curr_time;
|
|
|
|
curr_time = davinci_clockevent_read(clockevent,
|
|
DAVINCI_TIMER_REG_TIM12);
|
|
davinci_clockevent_write(clockevent,
|
|
clockevent->cmp_off, curr_time + cycles);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t davinci_timer_irq_timer(int irq, void *data)
|
|
{
|
|
struct davinci_clockevent *clockevent = data;
|
|
|
|
if (!clockevent_state_oneshot(&clockevent->dev))
|
|
davinci_tim12_shutdown(clockevent->base);
|
|
|
|
clockevent->dev.event_handler(&clockevent->dev);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static u64 notrace davinci_timer_read_sched_clock(void)
|
|
{
|
|
return readl_relaxed(davinci_clocksource.base +
|
|
davinci_clocksource.tim_off);
|
|
}
|
|
|
|
static u64 davinci_clocksource_read(struct clocksource *dev)
|
|
{
|
|
return davinci_timer_read_sched_clock();
|
|
}
|
|
|
|
/*
|
|
* Standard use-case: we're using tim12 for clockevent and tim34 for
|
|
* clocksource. The default is making the former run in oneshot mode
|
|
* and the latter in periodic mode.
|
|
*/
|
|
static void davinci_clocksource_init_tim34(void __iomem *base)
|
|
{
|
|
int tcr;
|
|
|
|
tcr = DAVINCI_TIMER_ENAMODE_PERIODIC <<
|
|
DAVINCI_TIMER_ENAMODE_SHIFT_TIM34;
|
|
tcr |= DAVINCI_TIMER_ENAMODE_ONESHOT <<
|
|
DAVINCI_TIMER_ENAMODE_SHIFT_TIM12;
|
|
|
|
writel_relaxed(0x0, base + DAVINCI_TIMER_REG_TIM34);
|
|
writel_relaxed(UINT_MAX, base + DAVINCI_TIMER_REG_PRD34);
|
|
writel_relaxed(tcr, base + DAVINCI_TIMER_REG_TCR);
|
|
}
|
|
|
|
/*
|
|
* Special use-case on da830: the DSP may use tim34. We're using tim12 for
|
|
* both clocksource and clockevent. We set tim12 to periodic and don't touch
|
|
* tim34.
|
|
*/
|
|
static void davinci_clocksource_init_tim12(void __iomem *base)
|
|
{
|
|
unsigned int tcr;
|
|
|
|
tcr = DAVINCI_TIMER_ENAMODE_PERIODIC <<
|
|
DAVINCI_TIMER_ENAMODE_SHIFT_TIM12;
|
|
|
|
writel_relaxed(0x0, base + DAVINCI_TIMER_REG_TIM12);
|
|
writel_relaxed(UINT_MAX, base + DAVINCI_TIMER_REG_PRD12);
|
|
writel_relaxed(tcr, base + DAVINCI_TIMER_REG_TCR);
|
|
}
|
|
|
|
static void davinci_timer_init(void __iomem *base)
|
|
{
|
|
/* Set clock to internal mode and disable it. */
|
|
writel_relaxed(0x0, base + DAVINCI_TIMER_REG_TCR);
|
|
/*
|
|
* Reset both 32-bit timers, set no prescaler for timer 34, set the
|
|
* timer to dual 32-bit unchained mode, unreset both 32-bit timers.
|
|
*/
|
|
writel_relaxed(DAVINCI_TIMER_TGCR_DEFAULT,
|
|
base + DAVINCI_TIMER_REG_TGCR);
|
|
/* Init both counters to zero. */
|
|
writel_relaxed(0x0, base + DAVINCI_TIMER_REG_TIM12);
|
|
writel_relaxed(0x0, base + DAVINCI_TIMER_REG_TIM34);
|
|
}
|
|
|
|
int __init davinci_timer_register(struct clk *clk,
|
|
const struct davinci_timer_cfg *timer_cfg)
|
|
{
|
|
struct davinci_clockevent *clockevent;
|
|
unsigned int tick_rate;
|
|
void __iomem *base;
|
|
int rv;
|
|
|
|
rv = clk_prepare_enable(clk);
|
|
if (rv) {
|
|
pr_err("Unable to prepare and enable the timer clock");
|
|
return rv;
|
|
}
|
|
|
|
if (!request_mem_region(timer_cfg->reg.start,
|
|
resource_size(&timer_cfg->reg),
|
|
"davinci-timer")) {
|
|
pr_err("Unable to request memory region");
|
|
return -EBUSY;
|
|
}
|
|
|
|
base = ioremap(timer_cfg->reg.start, resource_size(&timer_cfg->reg));
|
|
if (!base) {
|
|
pr_err("Unable to map the register range");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
davinci_timer_init(base);
|
|
tick_rate = clk_get_rate(clk);
|
|
|
|
clockevent = kzalloc(sizeof(*clockevent), GFP_KERNEL | __GFP_NOFAIL);
|
|
if (!clockevent) {
|
|
pr_err("Error allocating memory for clockevent data");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
clockevent->dev.name = "tim12";
|
|
clockevent->dev.features = CLOCK_EVT_FEAT_ONESHOT;
|
|
clockevent->dev.cpumask = cpumask_of(0);
|
|
clockevent->base = base;
|
|
|
|
if (timer_cfg->cmp_off) {
|
|
clockevent->cmp_off = timer_cfg->cmp_off;
|
|
clockevent->dev.set_next_event =
|
|
davinci_clockevent_set_next_event_cmp;
|
|
} else {
|
|
clockevent->dev.set_next_event =
|
|
davinci_clockevent_set_next_event_std;
|
|
clockevent->dev.set_state_oneshot =
|
|
davinci_clockevent_set_oneshot;
|
|
clockevent->dev.set_state_shutdown =
|
|
davinci_clockevent_shutdown;
|
|
}
|
|
|
|
rv = request_irq(timer_cfg->irq[DAVINCI_TIMER_CLOCKEVENT_IRQ].start,
|
|
davinci_timer_irq_timer, IRQF_TIMER,
|
|
"clockevent/tim12", clockevent);
|
|
if (rv) {
|
|
pr_err("Unable to request the clockevent interrupt");
|
|
return rv;
|
|
}
|
|
|
|
davinci_clocksource.dev.rating = 300;
|
|
davinci_clocksource.dev.read = davinci_clocksource_read;
|
|
davinci_clocksource.dev.mask =
|
|
CLOCKSOURCE_MASK(DAVINCI_TIMER_CLKSRC_BITS);
|
|
davinci_clocksource.dev.flags = CLOCK_SOURCE_IS_CONTINUOUS;
|
|
davinci_clocksource.base = base;
|
|
|
|
if (timer_cfg->cmp_off) {
|
|
davinci_clocksource.dev.name = "tim12";
|
|
davinci_clocksource.tim_off = DAVINCI_TIMER_REG_TIM12;
|
|
davinci_clocksource_init_tim12(base);
|
|
} else {
|
|
davinci_clocksource.dev.name = "tim34";
|
|
davinci_clocksource.tim_off = DAVINCI_TIMER_REG_TIM34;
|
|
davinci_clocksource_init_tim34(base);
|
|
}
|
|
|
|
clockevents_config_and_register(&clockevent->dev, tick_rate,
|
|
DAVINCI_TIMER_MIN_DELTA,
|
|
DAVINCI_TIMER_MAX_DELTA);
|
|
|
|
rv = clocksource_register_hz(&davinci_clocksource.dev, tick_rate);
|
|
if (rv) {
|
|
pr_err("Unable to register clocksource");
|
|
return rv;
|
|
}
|
|
|
|
sched_clock_register(davinci_timer_read_sched_clock,
|
|
DAVINCI_TIMER_CLKSRC_BITS, tick_rate);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __init of_davinci_timer_register(struct device_node *np)
|
|
{
|
|
struct davinci_timer_cfg timer_cfg = { };
|
|
struct clk *clk;
|
|
int rv;
|
|
|
|
rv = of_address_to_resource(np, 0, &timer_cfg.reg);
|
|
if (rv) {
|
|
pr_err("Unable to get the register range for timer");
|
|
return rv;
|
|
}
|
|
|
|
rv = of_irq_to_resource_table(np, timer_cfg.irq,
|
|
DAVINCI_TIMER_NUM_IRQS);
|
|
if (rv != DAVINCI_TIMER_NUM_IRQS) {
|
|
pr_err("Unable to get the interrupts for timer");
|
|
return rv;
|
|
}
|
|
|
|
clk = of_clk_get(np, 0);
|
|
if (IS_ERR(clk)) {
|
|
pr_err("Unable to get the timer clock");
|
|
return PTR_ERR(clk);
|
|
}
|
|
|
|
rv = davinci_timer_register(clk, &timer_cfg);
|
|
if (rv)
|
|
clk_put(clk);
|
|
|
|
return rv;
|
|
}
|
|
TIMER_OF_DECLARE(davinci_timer, "ti,da830-timer", of_davinci_timer_register);
|