kernel_optimize_test/fs/file_table.c
Linus Torvalds cb8e59cc87 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from David Miller:

 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
    Augusto von Dentz.

 2) Add GSO partial support to igc, from Sasha Neftin.

 3) Several cleanups and improvements to r8169 from Heiner Kallweit.

 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
    device self-test. From Andrew Lunn.

 5) Start moving away from custom driver versions, use the globally
    defined kernel version instead, from Leon Romanovsky.

 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.

 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.

 8) Add sriov and vf support to hinic, from Luo bin.

 9) Support Media Redundancy Protocol (MRP) in the bridging code, from
    Horatiu Vultur.

10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.

11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
    Dubroca. Also add ipv6 support for espintcp.

12) Lots of ReST conversions of the networking documentation, from Mauro
    Carvalho Chehab.

13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
    from Doug Berger.

14) Allow to dump cgroup id and filter by it in inet_diag code, from
    Dmitry Yakunin.

15) Add infrastructure to export netlink attribute policies to
    userspace, from Johannes Berg.

16) Several optimizations to sch_fq scheduler, from Eric Dumazet.

17) Fallback to the default qdisc if qdisc init fails because otherwise
    a packet scheduler init failure will make a device inoperative. From
    Jesper Dangaard Brouer.

18) Several RISCV bpf jit optimizations, from Luke Nelson.

19) Correct the return type of the ->ndo_start_xmit() method in several
    drivers, it's netdev_tx_t but many drivers were using
    'int'. From Yunjian Wang.

20) Add an ethtool interface for PHY master/slave config, from Oleksij
    Rempel.

21) Add BPF iterators, from Yonghang Song.

22) Add cable test infrastructure, including ethool interfaces, from
    Andrew Lunn. Marvell PHY driver is the first to support this
    facility.

23) Remove zero-length arrays all over, from Gustavo A. R. Silva.

24) Calculate and maintain an explicit frame size in XDP, from Jesper
    Dangaard Brouer.

25) Add CAP_BPF, from Alexei Starovoitov.

26) Support terse dumps in the packet scheduler, from Vlad Buslov.

27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.

28) Add devm_register_netdev(), from Bartosz Golaszewski.

29) Minimize qdisc resets, from Cong Wang.

30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
    eliminate set_fs/get_fs calls. From Christoph Hellwig.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
  selftests: net: ip_defrag: ignore EPERM
  net_failover: fixed rollback in net_failover_open()
  Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
  Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
  vmxnet3: allow rx flow hash ops only when rss is enabled
  hinic: add set_channels ethtool_ops support
  selftests/bpf: Add a default $(CXX) value
  tools/bpf: Don't use $(COMPILE.c)
  bpf, selftests: Use bpf_probe_read_kernel
  s390/bpf: Use bcr 0,%0 as tail call nop filler
  s390/bpf: Maintain 8-byte stack alignment
  selftests/bpf: Fix verifier test
  selftests/bpf: Fix sample_cnt shared between two threads
  bpf, selftests: Adapt cls_redirect to call csum_level helper
  bpf: Add csum_level helper for fixing up csum levels
  bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
  sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
  crypto/chtls: IPv6 support for inline TLS
  Crypto/chcr: Fixes a coccinile check error
  Crypto/chcr: Fixes compilations warnings
  ...
2020-06-03 16:27:18 -07:00

402 lines
10 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/fs/file_table.c
*
* Copyright (C) 1991, 1992 Linus Torvalds
* Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
*/
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/file.h>
#include <linux/fdtable.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/security.h>
#include <linux/cred.h>
#include <linux/eventpoll.h>
#include <linux/rcupdate.h>
#include <linux/mount.h>
#include <linux/capability.h>
#include <linux/cdev.h>
#include <linux/fsnotify.h>
#include <linux/sysctl.h>
#include <linux/percpu_counter.h>
#include <linux/percpu.h>
#include <linux/task_work.h>
#include <linux/ima.h>
#include <linux/swap.h>
#include <linux/atomic.h>
#include "internal.h"
/* sysctl tunables... */
struct files_stat_struct files_stat = {
.max_files = NR_FILE
};
/* SLAB cache for file structures */
static struct kmem_cache *filp_cachep __read_mostly;
static struct percpu_counter nr_files __cacheline_aligned_in_smp;
static void file_free_rcu(struct rcu_head *head)
{
struct file *f = container_of(head, struct file, f_u.fu_rcuhead);
put_cred(f->f_cred);
kmem_cache_free(filp_cachep, f);
}
static inline void file_free(struct file *f)
{
security_file_free(f);
if (!(f->f_mode & FMODE_NOACCOUNT))
percpu_counter_dec(&nr_files);
call_rcu(&f->f_u.fu_rcuhead, file_free_rcu);
}
/*
* Return the total number of open files in the system
*/
static long get_nr_files(void)
{
return percpu_counter_read_positive(&nr_files);
}
/*
* Return the maximum number of open files in the system
*/
unsigned long get_max_files(void)
{
return files_stat.max_files;
}
EXPORT_SYMBOL_GPL(get_max_files);
/*
* Handle nr_files sysctl
*/
#if defined(CONFIG_SYSCTL) && defined(CONFIG_PROC_FS)
int proc_nr_files(struct ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
files_stat.nr_files = get_nr_files();
return proc_doulongvec_minmax(table, write, buffer, lenp, ppos);
}
#else
int proc_nr_files(struct ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
#endif
static struct file *__alloc_file(int flags, const struct cred *cred)
{
struct file *f;
int error;
f = kmem_cache_zalloc(filp_cachep, GFP_KERNEL);
if (unlikely(!f))
return ERR_PTR(-ENOMEM);
f->f_cred = get_cred(cred);
error = security_file_alloc(f);
if (unlikely(error)) {
file_free_rcu(&f->f_u.fu_rcuhead);
return ERR_PTR(error);
}
atomic_long_set(&f->f_count, 1);
rwlock_init(&f->f_owner.lock);
spin_lock_init(&f->f_lock);
mutex_init(&f->f_pos_lock);
eventpoll_init_file(f);
f->f_flags = flags;
f->f_mode = OPEN_FMODE(flags);
/* f->f_version: 0 */
return f;
}
/* Find an unused file structure and return a pointer to it.
* Returns an error pointer if some error happend e.g. we over file
* structures limit, run out of memory or operation is not permitted.
*
* Be very careful using this. You are responsible for
* getting write access to any mount that you might assign
* to this filp, if it is opened for write. If this is not
* done, you will imbalance int the mount's writer count
* and a warning at __fput() time.
*/
struct file *alloc_empty_file(int flags, const struct cred *cred)
{
static long old_max;
struct file *f;
/*
* Privileged users can go above max_files
*/
if (get_nr_files() >= files_stat.max_files && !capable(CAP_SYS_ADMIN)) {
/*
* percpu_counters are inaccurate. Do an expensive check before
* we go and fail.
*/
if (percpu_counter_sum_positive(&nr_files) >= files_stat.max_files)
goto over;
}
f = __alloc_file(flags, cred);
if (!IS_ERR(f))
percpu_counter_inc(&nr_files);
return f;
over:
/* Ran out of filps - report that */
if (get_nr_files() > old_max) {
pr_info("VFS: file-max limit %lu reached\n", get_max_files());
old_max = get_nr_files();
}
return ERR_PTR(-ENFILE);
}
/*
* Variant of alloc_empty_file() that doesn't check and modify nr_files.
*
* Should not be used unless there's a very good reason to do so.
*/
struct file *alloc_empty_file_noaccount(int flags, const struct cred *cred)
{
struct file *f = __alloc_file(flags, cred);
if (!IS_ERR(f))
f->f_mode |= FMODE_NOACCOUNT;
return f;
}
/**
* alloc_file - allocate and initialize a 'struct file'
*
* @path: the (dentry, vfsmount) pair for the new file
* @flags: O_... flags with which the new file will be opened
* @fop: the 'struct file_operations' for the new file
*/
static struct file *alloc_file(const struct path *path, int flags,
const struct file_operations *fop)
{
struct file *file;
file = alloc_empty_file(flags, current_cred());
if (IS_ERR(file))
return file;
file->f_path = *path;
file->f_inode = path->dentry->d_inode;
file->f_mapping = path->dentry->d_inode->i_mapping;
file->f_wb_err = filemap_sample_wb_err(file->f_mapping);
file->f_sb_err = file_sample_sb_err(file);
if ((file->f_mode & FMODE_READ) &&
likely(fop->read || fop->read_iter))
file->f_mode |= FMODE_CAN_READ;
if ((file->f_mode & FMODE_WRITE) &&
likely(fop->write || fop->write_iter))
file->f_mode |= FMODE_CAN_WRITE;
file->f_mode |= FMODE_OPENED;
file->f_op = fop;
if ((file->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_READ)
i_readcount_inc(path->dentry->d_inode);
return file;
}
struct file *alloc_file_pseudo(struct inode *inode, struct vfsmount *mnt,
const char *name, int flags,
const struct file_operations *fops)
{
static const struct dentry_operations anon_ops = {
.d_dname = simple_dname
};
struct qstr this = QSTR_INIT(name, strlen(name));
struct path path;
struct file *file;
path.dentry = d_alloc_pseudo(mnt->mnt_sb, &this);
if (!path.dentry)
return ERR_PTR(-ENOMEM);
if (!mnt->mnt_sb->s_d_op)
d_set_d_op(path.dentry, &anon_ops);
path.mnt = mntget(mnt);
d_instantiate(path.dentry, inode);
file = alloc_file(&path, flags, fops);
if (IS_ERR(file)) {
ihold(inode);
path_put(&path);
}
return file;
}
EXPORT_SYMBOL(alloc_file_pseudo);
struct file *alloc_file_clone(struct file *base, int flags,
const struct file_operations *fops)
{
struct file *f = alloc_file(&base->f_path, flags, fops);
if (!IS_ERR(f)) {
path_get(&f->f_path);
f->f_mapping = base->f_mapping;
}
return f;
}
/* the real guts of fput() - releasing the last reference to file
*/
static void __fput(struct file *file)
{
struct dentry *dentry = file->f_path.dentry;
struct vfsmount *mnt = file->f_path.mnt;
struct inode *inode = file->f_inode;
fmode_t mode = file->f_mode;
if (unlikely(!(file->f_mode & FMODE_OPENED)))
goto out;
might_sleep();
fsnotify_close(file);
/*
* The function eventpoll_release() should be the first called
* in the file cleanup chain.
*/
eventpoll_release(file);
locks_remove_file(file);
ima_file_free(file);
if (unlikely(file->f_flags & FASYNC)) {
if (file->f_op->fasync)
file->f_op->fasync(-1, file, 0);
}
if (file->f_op->release)
file->f_op->release(inode, file);
if (unlikely(S_ISCHR(inode->i_mode) && inode->i_cdev != NULL &&
!(mode & FMODE_PATH))) {
cdev_put(inode->i_cdev);
}
fops_put(file->f_op);
put_pid(file->f_owner.pid);
if ((mode & (FMODE_READ | FMODE_WRITE)) == FMODE_READ)
i_readcount_dec(inode);
if (mode & FMODE_WRITER) {
put_write_access(inode);
__mnt_drop_write(mnt);
}
dput(dentry);
if (unlikely(mode & FMODE_NEED_UNMOUNT))
dissolve_on_fput(mnt);
mntput(mnt);
out:
file_free(file);
}
static LLIST_HEAD(delayed_fput_list);
static void delayed_fput(struct work_struct *unused)
{
struct llist_node *node = llist_del_all(&delayed_fput_list);
struct file *f, *t;
llist_for_each_entry_safe(f, t, node, f_u.fu_llist)
__fput(f);
}
static void ____fput(struct callback_head *work)
{
__fput(container_of(work, struct file, f_u.fu_rcuhead));
}
/*
* If kernel thread really needs to have the final fput() it has done
* to complete, call this. The only user right now is the boot - we
* *do* need to make sure our writes to binaries on initramfs has
* not left us with opened struct file waiting for __fput() - execve()
* won't work without that. Please, don't add more callers without
* very good reasons; in particular, never call that with locks
* held and never call that from a thread that might need to do
* some work on any kind of umount.
*/
void flush_delayed_fput(void)
{
delayed_fput(NULL);
}
EXPORT_SYMBOL_GPL(flush_delayed_fput);
static DECLARE_DELAYED_WORK(delayed_fput_work, delayed_fput);
void fput_many(struct file *file, unsigned int refs)
{
if (atomic_long_sub_and_test(refs, &file->f_count)) {
struct task_struct *task = current;
if (likely(!in_interrupt() && !(task->flags & PF_KTHREAD))) {
init_task_work(&file->f_u.fu_rcuhead, ____fput);
if (!task_work_add(task, &file->f_u.fu_rcuhead, true))
return;
/*
* After this task has run exit_task_work(),
* task_work_add() will fail. Fall through to delayed
* fput to avoid leaking *file.
*/
}
if (llist_add(&file->f_u.fu_llist, &delayed_fput_list))
schedule_delayed_work(&delayed_fput_work, 1);
}
}
void fput(struct file *file)
{
fput_many(file, 1);
}
/*
* synchronous analog of fput(); for kernel threads that might be needed
* in some umount() (and thus can't use flush_delayed_fput() without
* risking deadlocks), need to wait for completion of __fput() and know
* for this specific struct file it won't involve anything that would
* need them. Use only if you really need it - at the very least,
* don't blindly convert fput() by kernel thread to that.
*/
void __fput_sync(struct file *file)
{
if (atomic_long_dec_and_test(&file->f_count)) {
struct task_struct *task = current;
BUG_ON(!(task->flags & PF_KTHREAD));
__fput(file);
}
}
EXPORT_SYMBOL(fput);
void __init files_init(void)
{
filp_cachep = kmem_cache_create("filp", sizeof(struct file), 0,
SLAB_HWCACHE_ALIGN | SLAB_PANIC | SLAB_ACCOUNT, NULL);
percpu_counter_init(&nr_files, 0, GFP_KERNEL);
}
/*
* One file with associated inode and dcache is very roughly 1K. Per default
* do not use more than 10% of our memory for files.
*/
void __init files_maxfiles_init(void)
{
unsigned long n;
unsigned long nr_pages = totalram_pages();
unsigned long memreserve = (nr_pages - nr_free_pages()) * 3/2;
memreserve = min(memreserve, nr_pages - 1);
n = ((nr_pages - memreserve) * (PAGE_SIZE / 1024)) / 10;
files_stat.max_files = max_t(unsigned long, n, NR_FILE);
}