kernel_optimize_test/drivers/hid/Makefile
David Herrmann cb99221ba7 HID: wiimote: Add extension support stub
The wiimote supports several extensions. This adds a separate source file which
handles all extensions and can be disabled at compile-time.

The driver reacts on "plug"-events on the extension port and starts a worker
which initializes or deinitializes the extensions.

Currently, the initialization logic is not fully understood and we can only
detect and enable all extensions when all extensions are deactivated. Therefore,
we need to disable all extensions, then detect and activate them again to react
on "plug"-events.
However, deactivating extensions will generate a new "plug"-event and we will
never leave that loop. Hence, we only support extensions if they are plugged
before the wiimote is connected (or before the ext-input device is opened). In
the future we may support full extension hotplug support, but
reverse-engineering this may take a while.

Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-22 23:08:28 +01:00

91 lines
3.0 KiB
Makefile

#
# Makefile for the HID driver
#
hid-y := hid-core.o hid-input.o
ifdef CONFIG_DEBUG_FS
hid-objs += hid-debug.o
endif
obj-$(CONFIG_HID) += hid.o
hid-$(CONFIG_HIDRAW) += hidraw.o
hid-logitech-y := hid-lg.o
ifdef CONFIG_LOGITECH_FF
hid-logitech-y += hid-lgff.o
endif
ifdef CONFIG_LOGIRUMBLEPAD2_FF
hid-logitech-y += hid-lg2ff.o
endif
ifdef CONFIG_LOGIG940_FF
hid-logitech-y += hid-lg3ff.o
endif
ifdef CONFIG_LOGIWHEELS_FF
hid-logitech-y += hid-lg4ff.o
endif
hid-wiimote-y := hid-wiimote-core.o
ifdef CONFIG_HID_WIIMOTE_EXT
hid-wiimote-y += hid-wiimote-ext.o
endif
obj-$(CONFIG_HID_A4TECH) += hid-a4tech.o
obj-$(CONFIG_HID_ACRUX) += hid-axff.o
obj-$(CONFIG_HID_APPLE) += hid-apple.o
obj-$(CONFIG_HID_BELKIN) += hid-belkin.o
obj-$(CONFIG_HID_CHERRY) += hid-cherry.o
obj-$(CONFIG_HID_CHICONY) += hid-chicony.o
obj-$(CONFIG_HID_CYPRESS) += hid-cypress.o
obj-$(CONFIG_HID_DRAGONRISE) += hid-dr.o
obj-$(CONFIG_HID_EMS_FF) += hid-emsff.o
obj-$(CONFIG_HID_ELECOM) += hid-elecom.o
obj-$(CONFIG_HID_EZKEY) += hid-ezkey.o
obj-$(CONFIG_HID_GYRATION) += hid-gyration.o
obj-$(CONFIG_HID_HOLTEK) += hid-holtekff.o
obj-$(CONFIG_HID_KENSINGTON) += hid-kensington.o
obj-$(CONFIG_HID_KEYTOUCH) += hid-keytouch.o
obj-$(CONFIG_HID_KYE) += hid-kye.o
obj-$(CONFIG_HID_LCPOWER) += hid-lcpower.o
obj-$(CONFIG_HID_LOGITECH) += hid-logitech.o
obj-$(CONFIG_HID_LOGITECH_DJ) += hid-logitech-dj.o
obj-$(CONFIG_HID_MAGICMOUSE) += hid-magicmouse.o
obj-$(CONFIG_HID_MICROSOFT) += hid-microsoft.o
obj-$(CONFIG_HID_MONTEREY) += hid-monterey.o
obj-$(CONFIG_HID_MULTITOUCH) += hid-multitouch.o
obj-$(CONFIG_HID_NTRIG) += hid-ntrig.o
obj-$(CONFIG_HID_ORTEK) += hid-ortek.o
obj-$(CONFIG_HID_PRODIKEYS) += hid-prodikeys.o
obj-$(CONFIG_HID_QUANTA) += hid-quanta.o
obj-$(CONFIG_HID_PANTHERLORD) += hid-pl.o
obj-$(CONFIG_HID_PETALYNX) += hid-petalynx.o
obj-$(CONFIG_HID_PICOLCD) += hid-picolcd.o
obj-$(CONFIG_HID_PRIMAX) += hid-primax.o
obj-$(CONFIG_HID_ROCCAT) += hid-roccat.o
obj-$(CONFIG_HID_ROCCAT_COMMON) += hid-roccat-common.o
obj-$(CONFIG_HID_ROCCAT_ARVO) += hid-roccat-arvo.o
obj-$(CONFIG_HID_ROCCAT_KONE) += hid-roccat-kone.o
obj-$(CONFIG_HID_ROCCAT_KONEPLUS) += hid-roccat-koneplus.o
obj-$(CONFIG_HID_ROCCAT_KOVAPLUS) += hid-roccat-kovaplus.o
obj-$(CONFIG_HID_ROCCAT_PYRA) += hid-roccat-pyra.o
obj-$(CONFIG_HID_SAMSUNG) += hid-samsung.o
obj-$(CONFIG_HID_SMARTJOYPLUS) += hid-sjoy.o
obj-$(CONFIG_HID_SONY) += hid-sony.o
obj-$(CONFIG_HID_SPEEDLINK) += hid-speedlink.o
obj-$(CONFIG_HID_SUNPLUS) += hid-sunplus.o
obj-$(CONFIG_HID_GREENASIA) += hid-gaff.o
obj-$(CONFIG_HID_THRUSTMASTER) += hid-tmff.o
obj-$(CONFIG_HID_TOPSEED) += hid-topseed.o
obj-$(CONFIG_HID_TWINHAN) += hid-twinhan.o
obj-$(CONFIG_HID_UCLOGIC) += hid-uclogic.o
obj-$(CONFIG_HID_ZEROPLUS) += hid-zpff.o
obj-$(CONFIG_HID_ZYDACRON) += hid-zydacron.o
obj-$(CONFIG_HID_WACOM) += hid-wacom.o
obj-$(CONFIG_HID_WALTOP) += hid-waltop.o
obj-$(CONFIG_HID_WIIMOTE) += hid-wiimote.o
obj-$(CONFIG_USB_HID) += usbhid/
obj-$(CONFIG_USB_MOUSE) += usbhid/
obj-$(CONFIG_USB_KBD) += usbhid/