kernel_optimize_test/drivers/extcon
Hans de Goede 087c2bffb4 extcon: arizona: Fix various races on driver unbind
[ Upstream commit e5b499f6fb17bc95a813e85d0796522280203806 ]

We must free/disable all interrupts and cancel all pending works
before doing further cleanup.

Before this commit arizona_extcon_remove() was doing several
register writes to shut things down before disabling the IRQs
and it was cancelling only 1 of the 3 different works used.

Move all the register-writes shutting things down to after
the disabling of the IRQs and add the 2 missing
cancel_delayed_work_sync() calls.

This fixes various possible races on driver unbind. One of which
would always trigger on devices using the mic-clamp feature for
jack detection. The ARIZONA_MICD_CLAMP_MODE_MASK update was
done before disabling the IRQs, causing:
1. arizona_jackdet() to run
2. detect a jack being inserted (clamp disabled means jack inserted)
3. call arizona_start_mic() which:
3.1 Enables the MICVDD regulator
3.2 takes a pm_runtime_reference

And this was all happening after the ARIZONA_MICD_ENA bit clearing,
which would undo 3.1 and 3.2 because the ARIZONA_MICD_CLAMP_MODE_MASK
update was being done after the ARIZONA_MICD_ENA bit clearing.

So this means that arizona_extcon_remove() would exit with
1. MICVDD enabled and 2. The pm_runtime_reference being unbalanced.

MICVDD still being enabled caused the following oops when the
regulator is released by the devm framework:

[ 2850.745757] ------------[ cut here ]------------
[ 2850.745827] WARNING: CPU: 2 PID: 2098 at drivers/regulator/core.c:2123 _regulator_put.part.0+0x19f/0x1b0
[ 2850.745835] Modules linked in: extcon_arizona ...
...
[ 2850.746909] Call Trace:
[ 2850.746932]  regulator_put+0x2d/0x40
[ 2850.746946]  release_nodes+0x22a/0x260
[ 2850.746984]  __device_release_driver+0x190/0x240
[ 2850.747002]  driver_detach+0xd4/0x120
...
[ 2850.747337] ---[ end trace f455dfd7abd9781f ]---

Note this oops is just one of various theoretically possible races caused
by the wrong ordering inside arizona_extcon_remove(), this fixes the
ordering fixing all possible races, including the reported oops.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-11 14:47:24 +02:00
..
devres.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282 2019-06-05 17:36:37 +02:00
extcon-adc-jack.c extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()' 2020-05-29 17:36:01 +09:00
extcon-arizona.c extcon: arizona: Fix various races on driver unbind 2021-05-11 14:47:24 +02:00
extcon-axp288.c extcon: axp288: Use module_platform_driver to simplify the code 2020-09-30 00:40:06 +09:00
extcon-fsa9480.c extcon: fsa9480: Support the FSA880 variant 2019-07-24 19:10:19 +09:00
extcon-gpio.c extcon: gpio: Request reasonable interrupts 2019-07-24 19:20:19 +09:00
extcon-intel-cht-wc.c extcon-intel-cht-wc: Don't reset USB data connection at probe 2019-10-01 06:46:30 +09:00
extcon-intel-int3496.c
extcon-intel-mrfld.c
extcon-intel.h
extcon-max3355.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 233 2019-06-19 17:09:06 +02:00
extcon-max8997.c extcon: max8997: Return error code of extcon_dev_allocate() 2020-09-24 19:20:49 +09:00
extcon-max14577.c extcon: max14577: Return error code of extcon_dev_allocate() 2020-09-24 19:20:49 +09:00
extcon-max77693.c extcon: max77693: Fix modalias string 2020-12-30 11:53:49 +01:00
extcon-max77843.c extcon: max77843: Return error code of extcon_dev_allocate() 2020-09-24 19:20:49 +09:00
extcon-palmas.c extcon: palmas: Simplify with dev_err_probe() 2020-09-24 19:20:49 +09:00
extcon-ptn5150.c extcon: ptn5150: Do not print error during probe if nothing is attached 2020-09-30 00:38:54 +09:00
extcon-qcom-spmi-misc.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174 2019-05-30 11:26:41 -07:00
extcon-rt8973a.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 2019-05-30 11:26:32 -07:00
extcon-rt8973a.h treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 2019-05-30 11:26:32 -07:00
extcon-sm5502.c extcon: sm5502: Remove unneeded semicolon 2019-12-16 10:23:19 +09:00
extcon-sm5502.h extcon: sm5502: Reset registers during initialization 2019-10-11 10:43:26 +09:00
extcon-usb-gpio.c extcon: Replace HTTP links with HTTPS ones 2020-09-24 19:20:48 +09:00
extcon-usbc-cros-ec.c mfd / platform: cros_ec: Reorganize platform and mfd includes 2019-09-02 11:33:42 +01:00
extcon.c extcon: Fix error handling in extcon_dev_register 2021-04-07 15:00:11 +02:00
extcon.h
Kconfig mfd / platform: cros_ec: Move cros-ec core driver out from MFD 2019-09-02 11:33:12 +01:00
Makefile extcon: Add fsa9480 extcon driver 2019-06-22 21:34:51 +09:00