forked from luck/tmp_suning_uos_patched
2eeec85638
This patch converts the board specific interrupt code for r2d to make use of intc. While at it we improve the Kconfig to avoid confusion. - Two sets of interrupt tables exist - one for R2D-1 and one for R2D-PLUS. - R2D-1 and R2D-PLUS use the same irq constants. - R2D-1 has AX88796 support, R2D-PLUS does not hook up that IRQ. - R2D-PLUS has KEY support, R2D-1 does not hook up that IRQ. - The number and order of IRQ values are disconnected from register bits. - Interrupt sources now start from IRQ 100. - The machvec demux function converts from irlm IRQ 0-14 to IRQ 100++. Tested on R2D-1 and R2D-PLUS boards. Version 2 adds CONFIG_RTS7751R2D_1 and CONFIG_RTS7751R2D_PLUS together with intc structured as __initdata. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
74 lines
2.8 KiB
C
74 lines
2.8 KiB
C
#ifndef __ASM_SH_RENESAS_RTS7751R2D_H
|
|
#define __ASM_SH_RENESAS_RTS7751R2D_H
|
|
|
|
/*
|
|
* linux/include/asm-sh/renesas_rts7751r2d.h
|
|
*
|
|
* Copyright (C) 2000 Atom Create Engineering Co., Ltd.
|
|
*
|
|
* Renesas Technology Sales RTS7751R2D support
|
|
*/
|
|
|
|
/* Board specific addresses. */
|
|
|
|
#define PA_BCR 0xa4000000 /* FPGA */
|
|
#define PA_IRLMON 0xa4000002 /* Interrupt Status control */
|
|
#define PA_CFCTL 0xa4000004 /* CF Timing control */
|
|
#define PA_CFPOW 0xa4000006 /* CF Power control */
|
|
#define PA_DISPCTL 0xa4000008 /* Display Timing control */
|
|
#define PA_SDMPOW 0xa400000a /* SD Power control */
|
|
#define PA_RTCCE 0xa400000c /* RTC(9701) Enable control */
|
|
#define PA_PCICD 0xa400000e /* PCI Extention detect control */
|
|
#define PA_VOYAGERRTS 0xa4000020 /* VOYAGER Reset control */
|
|
|
|
#define PA_R2D1_AXRST 0xa4000022 /* AX_LAN Reset control */
|
|
#define PA_R2D1_CFRST 0xa4000024 /* CF Reset control */
|
|
#define PA_R2D1_ADMRTS 0xa4000026 /* SD Reset control */
|
|
#define PA_R2D1_EXTRST 0xa4000028 /* Extention Reset control */
|
|
#define PA_R2D1_CFCDINTCLR 0xa400002a /* CF Insert Interrupt clear */
|
|
|
|
#define PA_R2DPLUS_CFRST 0xa4000022 /* CF Reset control */
|
|
#define PA_R2DPLUS_ADMRTS 0xa4000024 /* SD Reset control */
|
|
#define PA_R2DPLUS_EXTRST 0xa4000026 /* Extention Reset control */
|
|
#define PA_R2DPLUS_CFCDINTCLR 0xa4000028 /* CF Insert Interrupt clear */
|
|
#define PA_R2DPLUS_KEYCTLCLR 0xa400002a /* Key Interrupt clear */
|
|
|
|
#define PA_POWOFF 0xa4000030 /* Board Power OFF control */
|
|
#define PA_VERREG 0xa4000032 /* FPGA Version Register */
|
|
#define PA_INPORT 0xa4000034 /* KEY Input Port control */
|
|
#define PA_OUTPORT 0xa4000036 /* LED control */
|
|
#define PA_BVERREG 0xa4000038 /* Board Revision Register */
|
|
|
|
#define PA_AX88796L 0xaa000400 /* AX88796L Area */
|
|
#define PA_VOYAGER 0xab000000 /* VOYAGER GX Area */
|
|
#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */
|
|
#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */
|
|
|
|
#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */
|
|
|
|
#define R2D_FPGA_IRQ_BASE 100
|
|
|
|
#define IRQ_VOYAGER (R2D_FPGA_IRQ_BASE + 0)
|
|
#define IRQ_EXT (R2D_FPGA_IRQ_BASE + 1)
|
|
#define IRQ_TP (R2D_FPGA_IRQ_BASE + 2)
|
|
#define IRQ_RTC_T (R2D_FPGA_IRQ_BASE + 3)
|
|
#define IRQ_RTC_A (R2D_FPGA_IRQ_BASE + 4)
|
|
#define IRQ_SDCARD (R2D_FPGA_IRQ_BASE + 5)
|
|
#define IRQ_CF_CD (R2D_FPGA_IRQ_BASE + 6)
|
|
#define IRQ_CF_IDE (R2D_FPGA_IRQ_BASE + 7)
|
|
#define IRQ_AX88796 (R2D_FPGA_IRQ_BASE + 8)
|
|
#define IRQ_KEY (R2D_FPGA_IRQ_BASE + 9)
|
|
#define IRQ_PCI_INTA (R2D_FPGA_IRQ_BASE + 10)
|
|
#define IRQ_PCI_INTB (R2D_FPGA_IRQ_BASE + 11)
|
|
#define IRQ_PCI_INTC (R2D_FPGA_IRQ_BASE + 12)
|
|
#define IRQ_PCI_INTD (R2D_FPGA_IRQ_BASE + 13)
|
|
|
|
/* arch/sh/boards/renesas/rts7751r2d/irq.c */
|
|
void init_rts7751r2d_IRQ(void);
|
|
int rts7751r2d_irq_demux(int);
|
|
|
|
#define __IO_PREFIX rts7751r2d
|
|
#include <asm/io_generic.h>
|
|
|
|
#endif /* __ASM_SH_RENESAS_RTS7751R2D */
|