AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
d21b7e6b98
kernel_optimize_test/drivers/hwmon/adt7x10.c
Thomas Gleixner 74ba9207e1 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 61 
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not write to the free software foundation inc
  675 mass ave cambridge ma 02139 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 441 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520071858.739733335@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24 17:36:45 +02:00

489 lines
12 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* adt7x10.c - Part of lm_sensors, Linux kernel modules for hardware
* monitoring
* This driver handles the ADT7410 and compatible digital temperature sensors.
* Hartmut Knaack <knaack.h@gmx.de> 2012-07-22
* based on lm75.c by Frodo Looijaard <frodol@dds.nl>
* and adt7410.c from iio-staging by Sonic Zhang <sonic.zhang@analog.com>
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include "adt7x10.h"
/*
* ADT7X10 status
*/
#define ADT7X10_STAT_T_LOW (1 << 4)
#define ADT7X10_STAT_T_HIGH (1 << 5)
#define ADT7X10_STAT_T_CRIT (1 << 6)
#define ADT7X10_STAT_NOT_RDY (1 << 7)
/*
* ADT7X10 config
*/
#define ADT7X10_FAULT_QUEUE_MASK (1 << 0 | 1 << 1)
#define ADT7X10_CT_POLARITY (1 << 2)
#define ADT7X10_INT_POLARITY (1 << 3)
#define ADT7X10_EVENT_MODE (1 << 4)
#define ADT7X10_MODE_MASK (1 << 5 | 1 << 6)
#define ADT7X10_FULL (0 << 5 | 0 << 6)
#define ADT7X10_PD (1 << 5 | 1 << 6)
#define ADT7X10_RESOLUTION (1 << 7)
/*
* ADT7X10 masks
*/
#define ADT7X10_T13_VALUE_MASK 0xFFF8
#define ADT7X10_T_HYST_MASK 0xF
/* straight from the datasheet */
#define ADT7X10_TEMP_MIN (-55000)
#define ADT7X10_TEMP_MAX 150000
/* Each client has this additional data */
struct adt7x10_data {
const struct adt7x10_ops *ops;
const char *name;
struct device *hwmon_dev;
struct mutex update_lock;
u8 config;
u8 oldconfig;
bool valid; /* true if registers valid */
unsigned long last_updated; /* In jiffies */
s16 temp[4]; /* Register values,
0 = input
1 = high
2 = low
3 = critical */
u8 hyst; /* hysteresis offset */
};
static int adt7x10_read_byte(struct device *dev, u8 reg)
{
struct adt7x10_data *d = dev_get_drvdata(dev);
return d->ops->read_byte(dev, reg);
}
static int adt7x10_write_byte(struct device *dev, u8 reg, u8 data)
{
struct adt7x10_data *d = dev_get_drvdata(dev);
return d->ops->write_byte(dev, reg, data);
}
static int adt7x10_read_word(struct device *dev, u8 reg)
{
struct adt7x10_data *d = dev_get_drvdata(dev);
return d->ops->read_word(dev, reg);
}
static int adt7x10_write_word(struct device *dev, u8 reg, u16 data)
{
struct adt7x10_data *d = dev_get_drvdata(dev);
return d->ops->write_word(dev, reg, data);
}
static const u8 ADT7X10_REG_TEMP[4] = {
ADT7X10_TEMPERATURE, /* input */
ADT7X10_T_ALARM_HIGH, /* high */
ADT7X10_T_ALARM_LOW, /* low */
ADT7X10_T_CRIT, /* critical */
};
static irqreturn_t adt7x10_irq_handler(int irq, void *private)
{
struct device *dev = private;
int status;
status = adt7x10_read_byte(dev, ADT7X10_STATUS);
if (status < 0)
return IRQ_HANDLED;
if (status & ADT7X10_STAT_T_HIGH)
sysfs_notify(&dev->kobj, NULL, "temp1_max_alarm");
if (status & ADT7X10_STAT_T_LOW)
sysfs_notify(&dev->kobj, NULL, "temp1_min_alarm");
if (status & ADT7X10_STAT_T_CRIT)
sysfs_notify(&dev->kobj, NULL, "temp1_crit_alarm");
return IRQ_HANDLED;
}
static int adt7x10_temp_ready(struct device *dev)
{
int i, status;
for (i = 0; i < 6; i++) {
status = adt7x10_read_byte(dev, ADT7X10_STATUS);
if (status < 0)
return status;
if (!(status & ADT7X10_STAT_NOT_RDY))
return 0;
msleep(60);
}
return -ETIMEDOUT;
}
static int adt7x10_update_temp(struct device *dev)
{
struct adt7x10_data *data = dev_get_drvdata(dev);
int ret = 0;
mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|| !data->valid) {
int temp;
dev_dbg(dev, "Starting update\n");
ret = adt7x10_temp_ready(dev); /* check for new value */
if (ret)
goto abort;
temp = adt7x10_read_word(dev, ADT7X10_REG_TEMP[0]);
if (temp < 0) {
ret = temp;
dev_dbg(dev, "Failed to read value: reg %d, error %d\n",
ADT7X10_REG_TEMP[0], ret);
goto abort;
}
data->temp[0] = temp;
data->last_updated = jiffies;
data->valid = true;
}
abort:
mutex_unlock(&data->update_lock);
return ret;
}
static int adt7x10_fill_cache(struct device *dev)
{
struct adt7x10_data *data = dev_get_drvdata(dev);
int ret;
int i;
for (i = 1; i < ARRAY_SIZE(data->temp); i++) {
ret = adt7x10_read_word(dev, ADT7X10_REG_TEMP[i]);
if (ret < 0) {
dev_dbg(dev, "Failed to read value: reg %d, error %d\n",
ADT7X10_REG_TEMP[i], ret);
return ret;
}
data->temp[i] = ret;
}
ret = adt7x10_read_byte(dev, ADT7X10_T_HYST);
if (ret < 0) {
dev_dbg(dev, "Failed to read value: reg %d, error %d\n",
ADT7X10_T_HYST, ret);
return ret;
}
data->hyst = ret;
return 0;
}
static s16 ADT7X10_TEMP_TO_REG(long temp)
{
return DIV_ROUND_CLOSEST(clamp_val(temp, ADT7X10_TEMP_MIN,
ADT7X10_TEMP_MAX) * 128, 1000);
}
static int ADT7X10_REG_TO_TEMP(struct adt7x10_data *data, s16 reg)
{
/* in 13 bit mode, bits 0-2 are status flags - mask them out */
if (!(data->config & ADT7X10_RESOLUTION))
reg &= ADT7X10_T13_VALUE_MASK;
/*
* temperature is stored in twos complement format, in steps of
* 1/128°C
*/
return DIV_ROUND_CLOSEST(reg * 1000, 128);
}
/*-----------------------------------------------------------------------*/
/* sysfs attributes for hwmon */
static ssize_t adt7x10_temp_show(struct device *dev,
struct device_attribute *da, char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
struct adt7x10_data *data = dev_get_drvdata(dev);
if (attr->index == 0) {
int ret;
ret = adt7x10_update_temp(dev);
if (ret)
return ret;
}
return sprintf(buf, "%d\n", ADT7X10_REG_TO_TEMP(data,
data->temp[attr->index]));
}
static ssize_t adt7x10_temp_store(struct device *dev,
struct device_attribute *da,
const char *buf, size_t count)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
struct adt7x10_data *data = dev_get_drvdata(dev);
int nr = attr->index;
long temp;
int ret;
ret = kstrtol(buf, 10, &temp);
if (ret)
return ret;
mutex_lock(&data->update_lock);
data->temp[nr] = ADT7X10_TEMP_TO_REG(temp);
ret = adt7x10_write_word(dev, ADT7X10_REG_TEMP[nr], data->temp[nr]);
if (ret)
count = ret;
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t adt7x10_t_hyst_show(struct device *dev,
struct device_attribute *da, char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
struct adt7x10_data *data = dev_get_drvdata(dev);
int nr = attr->index;
int hyst;
hyst = (data->hyst & ADT7X10_T_HYST_MASK) * 1000;
/*
* hysteresis is stored as a 4 bit offset in the device, convert it
* to an absolute value
*/
if (nr == 2) /* min has positive offset, others have negative */
hyst = -hyst;
return sprintf(buf, "%d\n",
ADT7X10_REG_TO_TEMP(data, data->temp[nr]) - hyst);
}
static ssize_t adt7x10_t_hyst_store(struct device *dev,
struct device_attribute *da,
const char *buf, size_t count)
{
struct adt7x10_data *data = dev_get_drvdata(dev);
int limit, ret;
long hyst;
ret = kstrtol(buf, 10, &hyst);
if (ret)
return ret;
/* convert absolute hysteresis value to a 4 bit delta value */
limit = ADT7X10_REG_TO_TEMP(data, data->temp[1]);
hyst = clamp_val(hyst, ADT7X10_TEMP_MIN, ADT7X10_TEMP_MAX);
data->hyst = clamp_val(DIV_ROUND_CLOSEST(limit - hyst, 1000),
0, ADT7X10_T_HYST_MASK);
ret = adt7x10_write_byte(dev, ADT7X10_T_HYST, data->hyst);
if (ret)
return ret;
return count;
}
static ssize_t adt7x10_alarm_show(struct device *dev,
struct device_attribute *da, char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
int ret;
ret = adt7x10_read_byte(dev, ADT7X10_STATUS);
if (ret < 0)
return ret;
return sprintf(buf, "%d\n", !!(ret & attr->index));
}
static ssize_t name_show(struct device *dev, struct device_attribute *da,
char *buf)
{
struct adt7x10_data *data = dev_get_drvdata(dev);
return sprintf(buf, "%s\n", data->name);
}
static SENSOR_DEVICE_ATTR_RO(temp1_input, adt7x10_temp, 0);
static SENSOR_DEVICE_ATTR_RW(temp1_max, adt7x10_temp, 1);
static SENSOR_DEVICE_ATTR_RW(temp1_min, adt7x10_temp, 2);
static SENSOR_DEVICE_ATTR_RW(temp1_crit, adt7x10_temp, 3);
static SENSOR_DEVICE_ATTR_RW(temp1_max_hyst, adt7x10_t_hyst, 1);
static SENSOR_DEVICE_ATTR_RO(temp1_min_hyst, adt7x10_t_hyst, 2);
static SENSOR_DEVICE_ATTR_RO(temp1_crit_hyst, adt7x10_t_hyst, 3);
static SENSOR_DEVICE_ATTR_RO(temp1_min_alarm, adt7x10_alarm,
ADT7X10_STAT_T_LOW);
static SENSOR_DEVICE_ATTR_RO(temp1_max_alarm, adt7x10_alarm,
ADT7X10_STAT_T_HIGH);
static SENSOR_DEVICE_ATTR_RO(temp1_crit_alarm, adt7x10_alarm,
ADT7X10_STAT_T_CRIT);
static DEVICE_ATTR_RO(name);
static struct attribute *adt7x10_attributes[] = {
&sensor_dev_attr_temp1_input.dev_attr.attr,
&sensor_dev_attr_temp1_max.dev_attr.attr,
&sensor_dev_attr_temp1_min.dev_attr.attr,
&sensor_dev_attr_temp1_crit.dev_attr.attr,
&sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
&sensor_dev_attr_temp1_min_hyst.dev_attr.attr,
&sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
&sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
&sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
NULL
};
static const struct attribute_group adt7x10_group = {
.attrs = adt7x10_attributes,
};
int adt7x10_probe(struct device *dev, const char *name, int irq,
const struct adt7x10_ops *ops)
{
struct adt7x10_data *data;
int ret;
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
data->ops = ops;
data->name = name;
dev_set_drvdata(dev, data);
mutex_init(&data->update_lock);
/* configure as specified */
ret = adt7x10_read_byte(dev, ADT7X10_CONFIG);
if (ret < 0) {
dev_dbg(dev, "Can't read config? %d\n", ret);
return ret;
}
data->oldconfig = ret;
/*
* Set to 16 bit resolution, continous conversion and comparator mode.
*/
data->config = data->oldconfig;
data->config &= ~(ADT7X10_MODE_MASK | ADT7X10_CT_POLARITY |
ADT7X10_INT_POLARITY);
data->config |= ADT7X10_FULL | ADT7X10_RESOLUTION | ADT7X10_EVENT_MODE;
if (data->config != data->oldconfig) {
ret = adt7x10_write_byte(dev, ADT7X10_CONFIG, data->config);
if (ret)
return ret;
}
dev_dbg(dev, "Config %02x\n", data->config);
ret = adt7x10_fill_cache(dev);
if (ret)
goto exit_restore;
/* Register sysfs hooks */
ret = sysfs_create_group(&dev->kobj, &adt7x10_group);
if (ret)
goto exit_restore;
/*
* The I2C device will already have it's own 'name' attribute, but for
* the SPI device we need to register it. name will only be non NULL if
* the device doesn't register the 'name' attribute on its own.
*/
if (name) {
ret = device_create_file(dev, &dev_attr_name);
if (ret)
goto exit_remove;
}
data->hwmon_dev = hwmon_device_register(dev);
if (IS_ERR(data->hwmon_dev)) {
ret = PTR_ERR(data->hwmon_dev);
goto exit_remove_name;
}
if (irq > 0) {
ret = request_threaded_irq(irq, NULL, adt7x10_irq_handler,
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
dev_name(dev), dev);
if (ret)
goto exit_hwmon_device_unregister;
}
return 0;
exit_hwmon_device_unregister:
hwmon_device_unregister(data->hwmon_dev);
exit_remove_name:
if (name)
device_remove_file(dev, &dev_attr_name);
exit_remove:
sysfs_remove_group(&dev->kobj, &adt7x10_group);
exit_restore:
adt7x10_write_byte(dev, ADT7X10_CONFIG, data->oldconfig);
return ret;
}
EXPORT_SYMBOL_GPL(adt7x10_probe);
int adt7x10_remove(struct device *dev, int irq)
{
struct adt7x10_data *data = dev_get_drvdata(dev);
if (irq > 0)
free_irq(irq, dev);
hwmon_device_unregister(data->hwmon_dev);
if (data->name)
device_remove_file(dev, &dev_attr_name);
sysfs_remove_group(&dev->kobj, &adt7x10_group);
if (data->oldconfig != data->config)
adt7x10_write_byte(dev, ADT7X10_CONFIG, data->oldconfig);
return 0;
}
EXPORT_SYMBOL_GPL(adt7x10_remove);
#ifdef CONFIG_PM_SLEEP
static int adt7x10_suspend(struct device *dev)
{
struct adt7x10_data *data = dev_get_drvdata(dev);
return adt7x10_write_byte(dev, ADT7X10_CONFIG,
data->config | ADT7X10_PD);
}
static int adt7x10_resume(struct device *dev)
{
struct adt7x10_data *data = dev_get_drvdata(dev);
return adt7x10_write_byte(dev, ADT7X10_CONFIG, data->config);
}
SIMPLE_DEV_PM_OPS(adt7x10_dev_pm_ops, adt7x10_suspend, adt7x10_resume);
EXPORT_SYMBOL_GPL(adt7x10_dev_pm_ops);
#endif /* CONFIG_PM_SLEEP */
MODULE_AUTHOR("Hartmut Knaack");
MODULE_DESCRIPTION("ADT7410/ADT7420, ADT7310/ADT7320 common code");
MODULE_LICENSE("GPL");
View Git Blame Copy Permalink