AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
d861f7bf14
kernel_optimize_test/drivers/message/fusion/mptbase.h
Kashyap, Desai 4ffd005a4d [SCSI] mptfusion: Bump version 03.04.14 
Version upgrade to 3.04.14.

Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-18 10:48:13 -06:00

1015 lines
31 KiB
C
Raw Blame History

/*
* linux/drivers/message/fusion/mptbase.h
* High performance SCSI + LAN / Fibre Channel device drivers.
* For use with PCI chip/adapter(s):
* LSIFC9xx/LSI409xx Fibre Channel
* running LSI Fusion MPT (Message Passing Technology) firmware.
*
* Copyright (c) 1999-2008 LSI Corporation
* (mailto:DL-MPTFusionLinux@lsi.com)
*
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; version 2 of the License.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
NO WARRANTY
THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
solely responsible for determining the appropriateness of using and
distributing the Program and assumes all risks associated with its
exercise of rights under this Agreement, including but not limited to
the risks and costs of program errors, damage to or loss of data,
programs or equipment, and unavailability or interruption of operations.
DISCLAIMER OF LIABILITY
NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef MPTBASE_H_INCLUDED
#define MPTBASE_H_INCLUDED
/*{-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/mutex.h>
#include "lsi/mpi_type.h"
#include "lsi/mpi.h" /* Fusion MPI(nterface) basic defs */
#include "lsi/mpi_ioc.h" /* Fusion MPT IOC(ontroller) defs */
#include "lsi/mpi_cnfg.h" /* IOC configuration support */
#include "lsi/mpi_init.h" /* SCSI Host (initiator) protocol support */
#include "lsi/mpi_lan.h" /* LAN over FC protocol support */
#include "lsi/mpi_raid.h" /* Integrated Mirroring support */
#include "lsi/mpi_fc.h" /* Fibre Channel (lowlevel) support */
#include "lsi/mpi_targ.h" /* SCSI/FCP Target protcol support */
#include "lsi/mpi_tool.h" /* Tools support */
#include "lsi/mpi_sas.h" /* SAS support */
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
#ifndef MODULEAUTHOR
#define MODULEAUTHOR "LSI Corporation"
#endif
#ifndef COPYRIGHT
#define COPYRIGHT "Copyright (c) 1999-2008 " MODULEAUTHOR
#endif
#define MPT_LINUX_VERSION_COMMON "3.04.14"
#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.04.14"
#define WHAT_MAGIC_STRING "@" "(" "#" ")"
#define show_mptmod_ver(s,ver) \
printk(KERN_INFO "%s %s\n", s, ver);
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* Fusion MPT(linux) driver configurable stuff...
*/
#define MPT_MAX_ADAPTERS 18
#define MPT_MAX_PROTOCOL_DRIVERS 16
#define MPT_MAX_BUS 1 /* Do not change */
#define MPT_MAX_FC_DEVICES 255
#define MPT_MAX_SCSI_DEVICES 16
#define MPT_LAST_LUN 255
#define MPT_SENSE_BUFFER_ALLOC 64
/* allow for 256 max sense alloc, but only 255 max request */
#if MPT_SENSE_BUFFER_ALLOC >= 256
# undef MPT_SENSE_BUFFER_ALLOC
# define MPT_SENSE_BUFFER_ALLOC 256
# define MPT_SENSE_BUFFER_SIZE 255
#else
# define MPT_SENSE_BUFFER_SIZE MPT_SENSE_BUFFER_ALLOC
#endif
#define MPT_NAME_LENGTH 32
#define MPT_KOBJ_NAME_LEN 20
#define MPT_PROCFS_MPTBASEDIR "mpt"
/* chg it to "driver/fusion" ? */
#define MPT_PROCFS_SUMMARY_ALL_NODE MPT_PROCFS_MPTBASEDIR "/summary"
#define MPT_PROCFS_SUMMARY_ALL_PATHNAME "/proc/" MPT_PROCFS_SUMMARY_ALL_NODE
#define MPT_FW_REV_MAGIC_ID_STRING "FwRev="
#define MPT_MAX_REQ_DEPTH 1023
#define MPT_DEFAULT_REQ_DEPTH 256
#define MPT_MIN_REQ_DEPTH 128
#define MPT_MAX_REPLY_DEPTH MPT_MAX_REQ_DEPTH
#define MPT_DEFAULT_REPLY_DEPTH 128
#define MPT_MIN_REPLY_DEPTH 8
#define MPT_MAX_REPLIES_PER_ISR 32
#define MPT_MAX_FRAME_SIZE 128
#define MPT_DEFAULT_FRAME_SIZE 128
#define MPT_REPLY_FRAME_SIZE 0x50 /* Must be a multiple of 8 */
#define MPT_SG_REQ_128_SCALE 1
#define MPT_SG_REQ_96_SCALE 2
#define MPT_SG_REQ_64_SCALE 4
#define CAN_SLEEP 1
#define NO_SLEEP 0
#define MPT_COALESCING_TIMEOUT 0x10
/*
* SCSI transfer rate defines.
*/
#define MPT_ULTRA320 0x08
#define MPT_ULTRA160 0x09
#define MPT_ULTRA2 0x0A
#define MPT_ULTRA 0x0C
#define MPT_FAST 0x19
#define MPT_SCSI 0x32
#define MPT_ASYNC 0xFF
#define MPT_NARROW 0
#define MPT_WIDE 1
#define C0_1030 0x08
#define XL_929 0x01
/*
* Try to keep these at 2^N-1
*/
#define MPT_FC_CAN_QUEUE 1024
#define MPT_SCSI_CAN_QUEUE 127
#define MPT_SAS_CAN_QUEUE 127
/*
* Set the MAX_SGE value based on user input.
*/
#ifdef CONFIG_FUSION_MAX_SGE
#if CONFIG_FUSION_MAX_SGE < 16
#define MPT_SCSI_SG_DEPTH 16
#elif CONFIG_FUSION_MAX_SGE > 128
#define MPT_SCSI_SG_DEPTH 128
#else
#define MPT_SCSI_SG_DEPTH CONFIG_FUSION_MAX_SGE
#endif
#else
#define MPT_SCSI_SG_DEPTH 40
#endif
#ifdef CONFIG_FUSION_MAX_FC_SGE
#if CONFIG_FUSION_MAX_FC_SGE < 16
#define MPT_SCSI_FC_SG_DEPTH 16
#elif CONFIG_FUSION_MAX_FC_SGE > 256
#define MPT_SCSI_FC_SG_DEPTH 256
#else
#define MPT_SCSI_FC_SG_DEPTH CONFIG_FUSION_MAX_FC_SGE
#endif
#else
#define MPT_SCSI_FC_SG_DEPTH 40
#endif
/* debug print string length used for events and iocstatus */
# define EVENT_DESCR_STR_SZ 100
#define MPT_POLLING_INTERVAL 1000 /* in milliseconds */
#ifdef __KERNEL__ /* { */
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
#include <linux/proc_fs.h>
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* Attempt semi-consistent error & warning msgs across
* MPT drivers. NOTE: Users of these macro defs must
* themselves define their own MYNAM.
*/
#define MYIOC_s_FMT MYNAM ": %s: "
#define MYIOC_s_DEBUG_FMT KERN_DEBUG MYNAM ": %s: "
#define MYIOC_s_INFO_FMT KERN_INFO MYNAM ": %s: "
#define MYIOC_s_NOTE_FMT KERN_NOTICE MYNAM ": %s: "
#define MYIOC_s_WARN_FMT KERN_WARNING MYNAM ": %s: WARNING - "
#define MYIOC_s_ERR_FMT KERN_ERR MYNAM ": %s: ERROR - "
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* ATTO UL4D associated structures and defines
*/
#define ATTOFLAG_DISC 0x0001
#define ATTOFLAG_TAGGED 0x0002
#define ATTOFLAG_WIDE_ENB 0x0008
#define ATTOFLAG_ID_ENB 0x0010
#define ATTOFLAG_LUN_ENB 0x0060
typedef struct _ATTO_DEVICE_INFO
{
u8 Offset; /* 00h */
u8 Period; /* 01h */
u16 ATTOFlags; /* 02h */
} ATTO_DEVICE_INFO, MPI_POINTER PTR_ATTO_DEVICE_INFO,
ATTODeviceInfo_t, MPI_POINTER pATTODeviceInfo_t;
typedef struct _ATTO_CONFIG_PAGE_SCSI_PORT_2
{
CONFIG_PAGE_HEADER Header; /* 00h */
u16 PortFlags; /* 04h */
u16 Unused1; /* 06h */
u32 Unused2; /* 08h */
ATTO_DEVICE_INFO DeviceSettings[16]; /* 0Ch */
} fATTO_CONFIG_PAGE_SCSI_PORT_2, MPI_POINTER PTR_ATTO_CONFIG_PAGE_SCSI_PORT_2,
ATTO_SCSIPortPage2_t, MPI_POINTER pATTO_SCSIPortPage2_t;
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* MPT protocol driver defs...
*/
typedef enum {
MPTBASE_DRIVER, /* MPT base class */
MPTCTL_DRIVER, /* MPT ioctl class */
MPTSPI_DRIVER, /* MPT SPI host class */
MPTFC_DRIVER, /* MPT FC host class */
MPTSAS_DRIVER, /* MPT SAS host class */
MPTLAN_DRIVER, /* MPT LAN class */
MPTSTM_DRIVER, /* MPT SCSI target mode class */
MPTUNKNOWN_DRIVER
} MPT_DRIVER_CLASS;
struct mpt_pci_driver{
int (*probe) (struct pci_dev *dev, const struct pci_device_id *id);
void (*remove) (struct pci_dev *dev);
};
/*
* MPT adapter / port / bus / device info structures...
*/
typedef union _MPT_FRAME_TRACKER {
struct {
struct list_head list;
u32 arg1;
u32 pad;
void *argp1;
} linkage;
/*
* NOTE: When request frames are free, on the linkage structure
* contets are valid. All other values are invalid.
* In particular, do NOT reply on offset [2]
* (in words) being the * message context.
* The message context must be reset (computed via base address
* + an offset) prior to issuing any command.
*
* NOTE2: On non-32-bit systems, where pointers are LARGE,
* using the linkage pointers destroys our sacred MsgContext
* field contents. But we don't care anymore because these
* are now reset in mpt_put_msg_frame() just prior to sending
* a request off to the IOC.
*/
struct {
u32 __hdr[2];
/*
* The following _MUST_ match the location of the
* MsgContext field in the MPT message headers.
*/
union {
u32 MsgContext;
struct {
u16 req_idx; /* Request index */
u8 cb_idx; /* callback function index */
u8 rsvd;
} fld;
} msgctxu;
} hwhdr;
/*
* Remark: 32 bit identifier:
* 31-24: reserved
* 23-16: call back index
* 15-0 : request index
*/
} MPT_FRAME_TRACKER;
/*
* We might want to view/access a frame as:
* 1) generic request header
* 2) SCSIIORequest
* 3) SCSIIOReply
* 4) MPIDefaultReply
* 5) frame tracker
*/
typedef struct _MPT_FRAME_HDR {
union {
MPIHeader_t hdr;
SCSIIORequest_t scsireq;
SCSIIOReply_t sreply;
ConfigReply_t configreply;
MPIDefaultReply_t reply;
MPT_FRAME_TRACKER frame;
} u;
} MPT_FRAME_HDR;
#define MPT_REQ_MSGFLAGS_DROPME 0x80
typedef struct _MPT_SGL_HDR {
SGESimple32_t sge[1];
} MPT_SGL_HDR;
typedef struct _MPT_SGL64_HDR {
SGESimple64_t sge[1];
} MPT_SGL64_HDR;
/*
* System interface register set
*/
typedef struct _SYSIF_REGS
{
u32 Doorbell; /* 00 System<->IOC Doorbell reg */
u32 WriteSequence; /* 04 Write Sequence register */
u32 Diagnostic; /* 08 Diagnostic register */
u32 TestBase; /* 0C Test Base Address */
u32 DiagRwData; /* 10 Read Write Data (fw download) */
u32 DiagRwAddress; /* 14 Read Write Address (fw download)*/
u32 Reserved1[6]; /* 18-2F reserved for future use */
u32 IntStatus; /* 30 Interrupt Status */
u32 IntMask; /* 34 Interrupt Mask */
u32 Reserved2[2]; /* 38-3F reserved for future use */
u32 RequestFifo; /* 40 Request Post/Free FIFO */
u32 ReplyFifo; /* 44 Reply Post/Free FIFO */
u32 RequestHiPriFifo; /* 48 Hi Priority Request FIFO */
u32 Reserved3; /* 4C-4F reserved for future use */
u32 HostIndex; /* 50 Host Index register */
u32 Reserved4[15]; /* 54-8F */
u32 Fubar; /* 90 For Fubar usage */
u32 Reserved5[1050];/* 94-10F8 */
u32 Reset_1078; /* 10FC Reset 1078 */
} SYSIF_REGS;
/*
* NOTE: Use MPI_{DOORBELL,WRITESEQ,DIAG}_xxx defs in lsi/mpi.h
* in conjunction with SYSIF_REGS accesses!
*/
/*
* Dynamic Multi-Pathing specific stuff...
*/
/* VirtTarget negoFlags field */
#define MPT_TARGET_NO_NEGO_WIDE 0x01
#define MPT_TARGET_NO_NEGO_SYNC 0x02
#define MPT_TARGET_NO_NEGO_QAS 0x04
#define MPT_TAPE_NEGO_IDP 0x08
/*
* VirtDevice - FC LUN device or SCSI target device
*/
typedef struct _VirtTarget {
struct scsi_target *starget;
u8 tflags;
u8 ioc_id;
u8 id;
u8 channel;
u8 minSyncFactor; /* 0xFF is async */
u8 maxOffset; /* 0 if async */
u8 maxWidth; /* 0 if narrow, 1 if wide */
u8 negoFlags; /* bit field, see above */
u8 raidVolume; /* set, if RAID Volume */
u8 type; /* byte 0 of Inquiry data */
u8 deleted; /* target in process of being removed */
u32 num_luns;
} VirtTarget;
typedef struct _VirtDevice {
VirtTarget *vtarget;
u8 configured_lun;
int lun;
} VirtDevice;
/*
* Fibre Channel (SCSI) target device and associated defines...
*/
#define MPT_TARGET_DEFAULT_DV_STATUS 0x00
#define MPT_TARGET_FLAGS_VALID_NEGO 0x01
#define MPT_TARGET_FLAGS_VALID_INQUIRY 0x02
#define MPT_TARGET_FLAGS_Q_YES 0x08
#define MPT_TARGET_FLAGS_VALID_56 0x10
#define MPT_TARGET_FLAGS_SAF_TE_ISSUED 0x20
#define MPT_TARGET_FLAGS_RAID_COMPONENT 0x40
#define MPT_TARGET_FLAGS_LED_ON 0x80
/*
* /proc/mpt interface
*/
typedef struct {
const char *name;
mode_t mode;
int pad;
read_proc_t *read_proc;
write_proc_t *write_proc;
} mpt_proc_entry_t;
#define MPT_PROC_READ_RETURN(buf,start,offset,request,eof,len) \
do { \
len -= offset; \
if (len < request) { \
*eof = 1; \
if (len <= 0) \
return 0; \
} else \
len = request; \
*start = buf + offset; \
return len; \
} while (0)
/*
* IOCTL structure and associated defines
*/
#define MPTCTL_RESET_OK 0x01 /* Issue Bus Reset */
#define MPT_MGMT_STATUS_RF_VALID 0x01 /* The Reply Frame is VALID */
#define MPT_MGMT_STATUS_COMMAND_GOOD 0x02 /* Command Status GOOD */
#define MPT_MGMT_STATUS_PENDING 0x04 /* command is pending */
#define MPT_MGMT_STATUS_DID_IOCRESET 0x08 /* IOC Reset occurred
on the current*/
#define MPT_MGMT_STATUS_SENSE_VALID 0x10 /* valid sense info */
#define MPT_MGMT_STATUS_TIMER_ACTIVE 0x20 /* obsolete */
#define MPT_MGMT_STATUS_FREE_MF 0x40 /* free the mf from
complete routine */
#define INITIALIZE_MGMT_STATUS(status) \
status = MPT_MGMT_STATUS_PENDING;
#define CLEAR_MGMT_STATUS(status) \
status = 0;
#define CLEAR_MGMT_PENDING_STATUS(status) \
status &= ~MPT_MGMT_STATUS_PENDING;
#define SET_MGMT_MSG_CONTEXT(msg_context, value) \
msg_context = value;
typedef struct _MPT_MGMT {
struct mutex mutex;
struct completion done;
u8 reply[MPT_DEFAULT_FRAME_SIZE]; /* reply frame data */
u8 sense[MPT_SENSE_BUFFER_ALLOC];
u8 status; /* current command status */
int completion_code;
u32 msg_context;
} MPT_MGMT;
/*
* Event Structure and define
*/
#define MPTCTL_EVENT_LOG_SIZE (0x000000032)
typedef struct _mpt_ioctl_events {
u32 event; /* Specified by define above */
u32 eventContext; /* Index or counter */
u32 data[2]; /* First 8 bytes of Event Data */
} MPT_IOCTL_EVENTS;
/*
* CONFIGPARM status defines
*/
#define MPT_CONFIG_GOOD MPI_IOCSTATUS_SUCCESS
#define MPT_CONFIG_ERROR 0x002F
/*
* Substructure to store SCSI specific configuration page data
*/
/* dvStatus defines: */
#define MPT_SCSICFG_USE_NVRAM 0x01 /* WriteSDP1 using NVRAM */
#define MPT_SCSICFG_ALL_IDS 0x02 /* WriteSDP1 to all IDS */
/* #define MPT_SCSICFG_BLK_NEGO 0x10 WriteSDP1 with WDTR and SDTR disabled */
typedef struct _SpiCfgData {
u32 PortFlags;
int *nvram; /* table of device NVRAM values */
IOCPage4_t *pIocPg4; /* SEP devices addressing */
dma_addr_t IocPg4_dma; /* Phys Addr of IOCPage4 data */
int IocPg4Sz; /* IOCPage4 size */
u8 minSyncFactor; /* 0xFF if async */
u8 maxSyncOffset; /* 0 if async */
u8 maxBusWidth; /* 0 if narrow, 1 if wide */
u8 busType; /* SE, LVD, HD */
u8 sdp1version; /* SDP1 version */
u8 sdp1length; /* SDP1 length */
u8 sdp0version; /* SDP0 version */
u8 sdp0length; /* SDP0 length */
u8 dvScheduled; /* 1 if scheduled */
u8 noQas; /* Disable QAS for this adapter */
u8 Saf_Te; /* 1 to force all Processors as
* SAF-TE if Inquiry data length
* is too short to check for SAF-TE
*/
u8 bus_reset; /* 1 to allow bus reset */
u8 rsvd[1];
}SpiCfgData;
typedef struct _SasCfgData {
u8 ptClear; /* 1 to automatically clear the
* persistent table.
* 0 to disable
* automatic clearing.
*/
}SasCfgData;
/*
* Inactive volume link list of raid component data
* @inactive_list
*/
struct inactive_raid_component_info {
struct list_head list;
u8 volumeID; /* volume target id */
u8 volumeBus; /* volume channel */
IOC_3_PHYS_DISK d; /* phys disk info */
};
typedef struct _RaidCfgData {
IOCPage2_t *pIocPg2; /* table of Raid Volumes */
IOCPage3_t *pIocPg3; /* table of physical disks */
struct mutex inactive_list_mutex;
struct list_head inactive_list; /* link list for physical
disk that belong in
inactive volumes */
}RaidCfgData;
typedef struct _FcCfgData {
/* will ultimately hold fc_port_page0 also */
struct {
FCPortPage1_t *data;
dma_addr_t dma;
int pg_sz;
} fc_port_page1[2];
} FcCfgData;
#define MPT_RPORT_INFO_FLAGS_REGISTERED 0x01 /* rport registered */
#define MPT_RPORT_INFO_FLAGS_MISSING 0x02 /* missing from DevPage0 scan */
/*
* data allocated for each fc rport device
*/
struct mptfc_rport_info
{
struct list_head list;
struct fc_rport *rport;
struct scsi_target *starget;
FCDevicePage0_t pg0;
u8 flags;
};
typedef void (*MPT_ADD_SGE)(void *pAddr, u32 flagslength, dma_addr_t dma_addr);
typedef void (*MPT_ADD_CHAIN)(void *pAddr, u8 next, u16 length,
dma_addr_t dma_addr);
/*
* Adapter Structure - pci_dev specific. Maximum: MPT_MAX_ADAPTERS
*/
typedef struct _MPT_ADAPTER
{
int id; /* Unique adapter id N {0,1,2,...} */
int pci_irq; /* This irq */
char name[MPT_NAME_LENGTH]; /* "iocN" */
char prod_name[MPT_NAME_LENGTH]; /* "LSIFC9x9" */
#ifdef CONFIG_FUSION_LOGGING
/* used in mpt_display_event_info */
char evStr[EVENT_DESCR_STR_SZ];
#endif
char board_name[16];
char board_assembly[16];
char board_tracer[16];
u16 nvdata_version_persistent;
u16 nvdata_version_default;
int debug_level;
u8 io_missing_delay;
u8 device_missing_delay;
SYSIF_REGS __iomem *chip; /* == c8817000 (mmap) */
SYSIF_REGS __iomem *pio_chip; /* Programmed IO (downloadboot) */
u8 bus_type;
u32 mem_phys; /* == f4020000 (mmap) */
u32 pio_mem_phys; /* Programmed IO (downloadboot) */
int mem_size; /* mmap memory size */
int number_of_buses;
int devices_per_bus;
int alloc_total;
u32 last_state;
int active;
u8 *alloc; /* frames alloc ptr */
dma_addr_t alloc_dma;
u32 alloc_sz;
MPT_FRAME_HDR *reply_frames; /* Reply msg frames - rounded up! */
u32 reply_frames_low_dma;
int reply_depth; /* Num Allocated reply frames */
int reply_sz; /* Reply frame size */
int num_chain; /* Number of chain buffers */
MPT_ADD_SGE add_sge; /* Pointer to add_sge
function */
MPT_ADD_CHAIN add_chain; /* Pointer to add_chain
function */
/* Pool of buffers for chaining. ReqToChain
* and ChainToChain track index of chain buffers.
* ChainBuffer (DMA) virt/phys addresses.
* FreeChainQ (lock) locking mechanisms.
*/
int *ReqToChain;
int *RequestNB;
int *ChainToChain;
u8 *ChainBuffer;
dma_addr_t ChainBufferDMA;
struct list_head FreeChainQ;
spinlock_t FreeChainQlock;
/* We (host driver) get to manage our own RequestQueue! */
dma_addr_t req_frames_dma;
MPT_FRAME_HDR *req_frames; /* Request msg frames - rounded up! */
u32 req_frames_low_dma;
int req_depth; /* Number of request frames */
int req_sz; /* Request frame size (bytes) */
spinlock_t FreeQlock;
struct list_head FreeQ;
/* Pool of SCSI sense buffers for commands coming from
* the SCSI mid-layer. We have one 256 byte sense buffer
* for each REQ entry.
*/
u8 *sense_buf_pool;
dma_addr_t sense_buf_pool_dma;
u32 sense_buf_low_dma;
u8 *HostPageBuffer; /* SAS - host page buffer support */
u32 HostPageBuffer_sz;
dma_addr_t HostPageBuffer_dma;
int mtrr_reg;
struct pci_dev *pcidev; /* struct pci_dev pointer */
int bars; /* bitmask of BAR's that must be configured */
int msi_enable;
u8 __iomem *memmap; /* mmap address */
struct Scsi_Host *sh; /* Scsi Host pointer */
SpiCfgData spi_data; /* Scsi config. data */
RaidCfgData raid_data; /* Raid config. data */
SasCfgData sas_data; /* Sas config. data */
FcCfgData fc_data; /* Fc config. data */
struct proc_dir_entry *ioc_dentry;
struct _MPT_ADAPTER *alt_ioc; /* ptr to 929 bound adapter port */
u32 biosVersion; /* BIOS version from IO Unit Page 2 */
int eventTypes; /* Event logging parameters */
int eventContext; /* Next event context */
int eventLogSize; /* Max number of cached events */
struct _mpt_ioctl_events *events; /* pointer to event log */
u8 *cached_fw; /* Pointer to FW */
dma_addr_t cached_fw_dma;
int hs_reply_idx;
#ifndef MFCNT
u32 pad0;
#else
u32 mfcnt;
#endif
u32 NB_for_64_byte_frame;
u32 hs_req[MPT_MAX_FRAME_SIZE/sizeof(u32)];
u16 hs_reply[MPT_MAX_FRAME_SIZE/sizeof(u16)];
IOCFactsReply_t facts;
PortFactsReply_t pfacts[2];
FCPortPage0_t fc_port_page0[2];
LANPage0_t lan_cnfg_page0;
LANPage1_t lan_cnfg_page1;
u8 ir_firmware; /* =1 if IR firmware detected */
/*
* Description: errata_flag_1064
* If a PCIX read occurs within 1 or 2 cycles after the chip receives
* a split completion for a read data, an internal address pointer incorrectly
* increments by 32 bytes
*/
int errata_flag_1064;
int aen_event_read_flag; /* flag to indicate event log was read*/
u8 FirstWhoInit;
u8 upload_fw; /* If set, do a fw upload */
u8 NBShiftFactor; /* NB Shift Factor based on Block Size (Facts) */
u8 pad1[4];
u8 DoneCtx;
u8 TaskCtx;
u8 InternalCtx;
struct list_head list;
struct net_device *netdev;
struct list_head sas_topology;
struct mutex sas_topology_mutex;
struct workqueue_struct *fw_event_q;
struct list_head fw_event_list;
spinlock_t fw_event_lock;
u8 fw_events_off; /* if '1', then ignore events */
char fw_event_q_name[MPT_KOBJ_NAME_LEN];
struct mutex sas_discovery_mutex;
u8 sas_discovery_runtime;
u8 sas_discovery_ignore_events;
/* port_info object for the host */
struct mptsas_portinfo *hba_port_info;
u64 hba_port_sas_addr;
u16 hba_port_num_phy;
struct list_head sas_device_info_list;
struct mutex sas_device_info_mutex;
u8 old_sas_discovery_protocal;
u8 sas_discovery_quiesce_io;
int sas_index; /* index refrencing */
MPT_MGMT sas_mgmt;
MPT_MGMT mptbase_cmds; /* for sending config pages */
MPT_MGMT internal_cmds;
MPT_MGMT taskmgmt_cmds;
MPT_MGMT ioctl_cmds;
spinlock_t taskmgmt_lock; /* diagnostic reset lock */
int taskmgmt_in_progress;
u8 taskmgmt_quiesce_io;
u8 ioc_reset_in_progress;
struct work_struct sas_persist_task;
struct work_struct fc_setup_reset_work;
struct list_head fc_rports;
struct work_struct fc_lsc_work;
u8 fc_link_speed[2];
spinlock_t fc_rescan_work_lock;
struct work_struct fc_rescan_work;
char fc_rescan_work_q_name[MPT_KOBJ_NAME_LEN];
struct workqueue_struct *fc_rescan_work_q;
/* driver forced bus resets count */
unsigned long hard_resets;
/* fw/external bus resets count */
unsigned long soft_resets;
/* cmd timeouts */
unsigned long timeouts;
struct scsi_cmnd **ScsiLookup;
spinlock_t scsi_lookup_lock;
u64 dma_mask;
u32 broadcast_aen_busy;
char reset_work_q_name[MPT_KOBJ_NAME_LEN];
struct workqueue_struct *reset_work_q;
struct delayed_work fault_reset_work;
u8 sg_addr_size;
u8 in_rescan;
u8 SGE_size;
} MPT_ADAPTER;
/*
* New return value convention:
* 1 = Ok to free associated request frame
* 0 = not Ok ...
*/
typedef int (*MPT_CALLBACK)(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply);
typedef int (*MPT_EVHANDLER)(MPT_ADAPTER *ioc, EventNotificationReply_t *evReply);
typedef int (*MPT_RESETHANDLER)(MPT_ADAPTER *ioc, int reset_phase);
/* reset_phase defs */
#define MPT_IOC_PRE_RESET 0
#define MPT_IOC_POST_RESET 1
#define MPT_IOC_SETUP_RESET 2
/*
* Invent MPT host event (super-set of MPI Events)
* Fitted to 1030's 64-byte [max] request frame size
*/
typedef struct _MPT_HOST_EVENT {
EventNotificationReply_t MpiEvent; /* 8 32-bit words! */
u32 pad[6];
void *next;
} MPT_HOST_EVENT;
#define MPT_HOSTEVENT_IOC_BRINGUP 0x91
#define MPT_HOSTEVENT_IOC_RECOVER 0x92
/* Define the generic types based on the size
* of the dma_addr_t type.
*/
typedef struct _mpt_sge {
u32 FlagsLength;
dma_addr_t Address;
} MptSge_t;
#define mpt_msg_flags(ioc) \
(ioc->sg_addr_size == sizeof(u64)) ? \
MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_64 : \
MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_32
#define MPT_SGE_FLAGS_64_BIT_ADDRESSING \
(MPI_SGE_FLAGS_64_BIT_ADDRESSING << MPI_SGE_FLAGS_SHIFT)
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* Funky (private) macros...
*/
#include "mptdebug.h"
#define MPT_INDEX_2_MFPTR(ioc,idx) \
(MPT_FRAME_HDR*)( (u8*)(ioc)->req_frames + (ioc)->req_sz * (idx) )
#define MFPTR_2_MPT_INDEX(ioc,mf) \
(int)( ((u8*)mf - (u8*)(ioc)->req_frames) / (ioc)->req_sz )
#define MPT_INDEX_2_RFPTR(ioc,idx) \
(MPT_FRAME_HDR*)( (u8*)(ioc)->reply_frames + (ioc)->req_sz * (idx) )
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
#define SCSI_STD_SENSE_BYTES 18
#define SCSI_STD_INQUIRY_BYTES 36
#define SCSI_MAX_INQUIRY_BYTES 96
/*
* MPT_SCSI_HOST defines - Used by the IOCTL and the SCSI drivers
* Private to the driver.
*/
/* LOCAL structure and fields used when processing
* internally generated commands. These include:
* bus scan, dv and config requests.
*/
typedef struct _MPT_LOCAL_REPLY {
ConfigPageHeader_t header;
int completion;
u8 sense[SCSI_STD_SENSE_BYTES];
u8 scsiStatus;
u8 skip;
u32 pad;
} MPT_LOCAL_REPLY;
#define MPT_HOST_BUS_UNKNOWN (0xFF)
#define MPT_HOST_TOO_MANY_TM (0x05)
#define MPT_HOST_NVRAM_INVALID (0xFFFFFFFF)
#define MPT_HOST_NO_CHAIN (0xFFFFFFFF)
#define MPT_NVRAM_MASK_TIMEOUT (0x000000FF)
#define MPT_NVRAM_SYNC_MASK (0x0000FF00)
#define MPT_NVRAM_SYNC_SHIFT (8)
#define MPT_NVRAM_DISCONNECT_ENABLE (0x00010000)
#define MPT_NVRAM_ID_SCAN_ENABLE (0x00020000)
#define MPT_NVRAM_LUN_SCAN_ENABLE (0x00040000)
#define MPT_NVRAM_TAG_QUEUE_ENABLE (0x00080000)
#define MPT_NVRAM_WIDE_DISABLE (0x00100000)
#define MPT_NVRAM_BOOT_CHOICE (0x00200000)
/* The TM_STATE variable is used to provide strict single threading of TM
* requests as well as communicate TM error conditions.
*/
#define TM_STATE_NONE (0)
#define TM_STATE_IN_PROGRESS (1)
#define TM_STATE_ERROR (2)
typedef enum {
FC,
SPI,
SAS
} BUS_TYPE;
typedef struct _MPT_SCSI_HOST {
MPT_ADAPTER *ioc;
ushort sel_timeout[MPT_MAX_FC_DEVICES];
char *info_kbuf;
long last_queue_full;
u16 spi_pending;
struct list_head target_reset_list;
} MPT_SCSI_HOST;
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* More Dynamic Multi-Pathing stuff...
*/
/* Forward decl, a strange C thing, to prevent gcc compiler warnings */
struct scsi_cmnd;
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* Generic structure passed to the base mpt_config function.
*/
typedef struct _x_config_parms {
union {
ConfigExtendedPageHeader_t *ehdr;
ConfigPageHeader_t *hdr;
} cfghdr;
dma_addr_t physAddr;
u32 pageAddr; /* properly formatted */
u16 status;
u8 action;
u8 dir;
u8 timeout; /* seconds */
} CONFIGPARMS;
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* Public entry points...
*/
extern int mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id);
extern void mpt_detach(struct pci_dev *pdev);
#ifdef CONFIG_PM
extern int mpt_suspend(struct pci_dev *pdev, pm_message_t state);
extern int mpt_resume(struct pci_dev *pdev);
#endif
extern u8 mpt_register(MPT_CALLBACK cbfunc, MPT_DRIVER_CLASS dclass);
extern void mpt_deregister(u8 cb_idx);
extern int mpt_event_register(u8 cb_idx, MPT_EVHANDLER ev_cbfunc);
extern void mpt_event_deregister(u8 cb_idx);
extern int mpt_reset_register(u8 cb_idx, MPT_RESETHANDLER reset_func);
extern void mpt_reset_deregister(u8 cb_idx);
extern int mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, u8 cb_idx);
extern void mpt_device_driver_deregister(u8 cb_idx);
extern MPT_FRAME_HDR *mpt_get_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc);
extern void mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf);
extern void mpt_put_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf);
extern void mpt_put_msg_frame_hi_pri(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf);
extern int mpt_send_handshake_request(u8 cb_idx, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag);
extern int mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp);
extern u32 mpt_GetIocState(MPT_ADAPTER *ioc, int cooked);
extern void mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buf, int *size, int len, int showlan);
extern int mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag);
extern int mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *cfg);
extern int mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size);
extern void mpt_free_fw_memory(MPT_ADAPTER *ioc);
extern int mpt_findImVolumes(MPT_ADAPTER *ioc);
extern int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode);
extern int mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num, pRaidPhysDiskPage0_t phys_disk);
extern int mpt_raid_phys_disk_pg1(MPT_ADAPTER *ioc, u8 phys_disk_num,
pRaidPhysDiskPage1_t phys_disk);
extern int mpt_raid_phys_disk_get_num_paths(MPT_ADAPTER *ioc,
u8 phys_disk_num);
extern int mpt_set_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc);
extern void mpt_clear_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc);
extern void mpt_halt_firmware(MPT_ADAPTER *ioc);
/*
* Public data decl's...
*/
extern struct list_head ioc_list;
extern int mpt_fwfault_debug;
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
#endif /* } __KERNEL__ */
#ifdef CONFIG_64BIT
#define CAST_U32_TO_PTR(x) ((void *)(u64)x)
#define CAST_PTR_TO_U32(x) ((u32)(u64)x)
#else
#define CAST_U32_TO_PTR(x) ((void *)x)
#define CAST_PTR_TO_U32(x) ((u32)x)
#endif
#define MPT_PROTOCOL_FLAGS_c_c_c_c(pflags) \
((pflags) & MPI_PORTFACTS_PROTOCOL_INITIATOR) ? 'I' : 'i', \
((pflags) & MPI_PORTFACTS_PROTOCOL_TARGET) ? 'T' : 't', \
((pflags) & MPI_PORTFACTS_PROTOCOL_LAN) ? 'L' : 'l', \
((pflags) & MPI_PORTFACTS_PROTOCOL_LOGBUSADDR) ? 'B' : 'b'
/*
* Shifted SGE Defines - Use in SGE with FlagsLength member.
* Otherwise, use MPI_xxx defines (refer to "lsi/mpi.h" header).
* Defaults: 32 bit SGE, SYSTEM_ADDRESS if direction bit is 0, read
*/
#define MPT_TRANSFER_IOC_TO_HOST (0x00000000)
#define MPT_TRANSFER_HOST_TO_IOC (0x04000000)
#define MPT_SGE_FLAGS_LAST_ELEMENT (0x80000000)
#define MPT_SGE_FLAGS_END_OF_BUFFER (0x40000000)
#define MPT_SGE_FLAGS_LOCAL_ADDRESS (0x08000000)
#define MPT_SGE_FLAGS_DIRECTION (0x04000000)
#define MPT_SGE_FLAGS_END_OF_LIST (0x01000000)
#define MPT_SGE_FLAGS_TRANSACTION_ELEMENT (0x00000000)
#define MPT_SGE_FLAGS_SIMPLE_ELEMENT (0x10000000)
#define MPT_SGE_FLAGS_CHAIN_ELEMENT (0x30000000)
#define MPT_SGE_FLAGS_ELEMENT_MASK (0x30000000)
#define MPT_SGE_FLAGS_SSIMPLE_READ \
(MPT_SGE_FLAGS_LAST_ELEMENT | \
MPT_SGE_FLAGS_END_OF_BUFFER | \
MPT_SGE_FLAGS_END_OF_LIST | \
MPT_SGE_FLAGS_SIMPLE_ELEMENT | \
MPT_TRANSFER_IOC_TO_HOST)
#define MPT_SGE_FLAGS_SSIMPLE_WRITE \
(MPT_SGE_FLAGS_LAST_ELEMENT | \
MPT_SGE_FLAGS_END_OF_BUFFER | \
MPT_SGE_FLAGS_END_OF_LIST | \
MPT_SGE_FLAGS_SIMPLE_ELEMENT | \
MPT_TRANSFER_HOST_TO_IOC)
/*}-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
#endif
View Git Blame Copy Permalink