kernel_optimize_test/Documentation/cpu-freq/cpufreq-nforce2.txt
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

20 lines
599 B
Plaintext

The cpufreq-nforce2 driver changes the FSB on nVidia nForce2 plattforms.
This works better than on other plattforms, because the FSB of the CPU
can be controlled independently from the PCI/AGP clock.
The module has two options:
fid: multiplier * 10 (for example 8.5 = 85)
min_fsb: minimum FSB
If not set, fid is calculated from the current CPU speed and the FSB.
min_fsb defaults to FSB at boot time - 50 MHz.
IMPORTANT: The available range is limited downwards!
Also the minimum available FSB can differ, for systems
booting with 200 MHz, 150 should always work.