forked from luck/tmp_suning_uos_patched
cf93c94581
MODULE_DEVICE_TABLE only expands to something if it's compiled for a module. So when building-in support for the phys, the mdio_device_id tables are unused. Marking them with __maybe_unused fixes the following warnings: drivers/net/phy/bcm63xx.c:134: warning: 'bcm63xx_tbl' defined but not used drivers/net/phy/broadcom.c:933: warning: 'broadcom_tbl' defined but not used drivers/net/phy/cicada.c:162: warning: 'cicada_tbl' defined but not used drivers/net/phy/davicom.c:222: warning: 'davicom_tbl' defined but not used drivers/net/phy/et1011c.c:114: warning: 'et1011c_tbl' defined but not used drivers/net/phy/icplus.c:137: warning: 'icplus_tbl' defined but not used drivers/net/phy/lxt.c:226: warning: 'lxt_tbl' defined but not used drivers/net/phy/marvell.c:724: warning: 'marvell_tbl' defined but not used drivers/net/phy/micrel.c:234: warning: 'micrel_tbl' defined but not used drivers/net/phy/national.c:154: warning: 'ns_tbl' defined but not used drivers/net/phy/qsemi.c:141: warning: 'qs6612_tbl' defined but not used drivers/net/phy/realtek.c:82: warning: 'realtek_tbl' defined but not used drivers/net/phy/smsc.c:257: warning: 'smsc_tbl' defined but not used drivers/net/phy/ste10Xp.c:135: warning: 'ste10Xp_tbl' defined but not used drivers/net/phy/vitesse.c:195: warning: 'vitesse_tbl' defined but not used Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
147 lines
3.7 KiB
C
147 lines
3.7 KiB
C
/*
|
|
* drivers/net/phy/qsemi.c
|
|
*
|
|
* Driver for Quality Semiconductor PHYs
|
|
*
|
|
* Author: Andy Fleming
|
|
*
|
|
* Copyright (c) 2004 Freescale Semiconductor, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/string.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/unistd.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/phy.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/uaccess.h>
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
/* The Quality Semiconductor QS6612 is used on the RPX CLLF */
|
|
|
|
/* register definitions */
|
|
|
|
#define MII_QS6612_MCR 17 /* Mode Control Register */
|
|
#define MII_QS6612_FTR 27 /* Factory Test Register */
|
|
#define MII_QS6612_MCO 28 /* Misc. Control Register */
|
|
#define MII_QS6612_ISR 29 /* Interrupt Source Register */
|
|
#define MII_QS6612_IMR 30 /* Interrupt Mask Register */
|
|
#define MII_QS6612_IMR_INIT 0x003a
|
|
#define MII_QS6612_PCR 31 /* 100BaseTx PHY Control Reg. */
|
|
|
|
#define QS6612_PCR_AN_COMPLETE 0x1000
|
|
#define QS6612_PCR_RLBEN 0x0200
|
|
#define QS6612_PCR_DCREN 0x0100
|
|
#define QS6612_PCR_4B5BEN 0x0040
|
|
#define QS6612_PCR_TX_ISOLATE 0x0020
|
|
#define QS6612_PCR_MLT3_DIS 0x0002
|
|
#define QS6612_PCR_SCRM_DESCRM 0x0001
|
|
|
|
MODULE_DESCRIPTION("Quality Semiconductor PHY driver");
|
|
MODULE_AUTHOR("Andy Fleming");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
/* Returns 0, unless there's a write error */
|
|
static int qs6612_config_init(struct phy_device *phydev)
|
|
{
|
|
/* The PHY powers up isolated on the RPX,
|
|
* so send a command to allow operation.
|
|
* XXX - My docs indicate this should be 0x0940
|
|
* ...or something. The current value sets three
|
|
* reserved bits, bit 11, which specifies it should be
|
|
* set to one, bit 10, which specifies it should be set
|
|
* to 0, and bit 7, which doesn't specify. However, my
|
|
* docs are preliminary, and I will leave it like this
|
|
* until someone more knowledgable corrects me or it.
|
|
* -- Andy Fleming
|
|
*/
|
|
return phy_write(phydev, MII_QS6612_PCR, 0x0dc0);
|
|
}
|
|
|
|
static int qs6612_ack_interrupt(struct phy_device *phydev)
|
|
{
|
|
int err;
|
|
|
|
err = phy_read(phydev, MII_QS6612_ISR);
|
|
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = phy_read(phydev, MII_BMSR);
|
|
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = phy_read(phydev, MII_EXPANSION);
|
|
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qs6612_config_intr(struct phy_device *phydev)
|
|
{
|
|
int err;
|
|
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
|
|
err = phy_write(phydev, MII_QS6612_IMR,
|
|
MII_QS6612_IMR_INIT);
|
|
else
|
|
err = phy_write(phydev, MII_QS6612_IMR, 0);
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
static struct phy_driver qs6612_driver = {
|
|
.phy_id = 0x00181440,
|
|
.name = "QS6612",
|
|
.phy_id_mask = 0xfffffff0,
|
|
.features = PHY_BASIC_FEATURES,
|
|
.flags = PHY_HAS_INTERRUPT,
|
|
.config_init = qs6612_config_init,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.ack_interrupt = qs6612_ack_interrupt,
|
|
.config_intr = qs6612_config_intr,
|
|
.driver = { .owner = THIS_MODULE,},
|
|
};
|
|
|
|
static int __init qs6612_init(void)
|
|
{
|
|
return phy_driver_register(&qs6612_driver);
|
|
}
|
|
|
|
static void __exit qs6612_exit(void)
|
|
{
|
|
phy_driver_unregister(&qs6612_driver);
|
|
}
|
|
|
|
module_init(qs6612_init);
|
|
module_exit(qs6612_exit);
|
|
|
|
static struct mdio_device_id __maybe_unused qs6612_tbl[] = {
|
|
{ 0x00181440, 0xfffffff0 },
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(mdio, qs6612_tbl);
|