forked from luck/tmp_suning_uos_patched
3ba9e10a6d
DAI type information is only ever used within ASoC in order to special case AC97 and for diagnostic purposes. Since modern CPUs and codecs support multi function DAIs which can be configured for several modes it is more trouble than it's worth to maintain anything other than a flag identifying AC97 DAIs so remove the type field and replace it with an ac97_control flag. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
320 lines
7.4 KiB
C
320 lines
7.4 KiB
C
/*
|
|
* Hitachi Audio Controller (AC97) support for SH7760/SH7780
|
|
*
|
|
* Copyright (c) 2007 Manuel Lauss <mano@roarinelk.homelinux.net>
|
|
* licensed under the terms outlined in the file COPYING at the root
|
|
* of the linux kernel sources.
|
|
*
|
|
* dont forget to set IPSEL/OMSEL register bits (in your board code) to
|
|
* enable HAC output pins!
|
|
*/
|
|
|
|
/* BIG FAT FIXME: although the SH7760 has 2 independent AC97 units, only
|
|
* the FIRST can be used since ASoC does not pass any information to the
|
|
* ac97_read/write() functions regarding WHICH unit to use. You'll have
|
|
* to edit the code a bit to use the other AC97 unit. --mlau
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/delay.h>
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/ac97_codec.h>
|
|
#include <sound/initval.h>
|
|
#include <sound/soc.h>
|
|
|
|
/* regs and bits */
|
|
#define HACCR 0x08
|
|
#define HACCSAR 0x20
|
|
#define HACCSDR 0x24
|
|
#define HACPCML 0x28
|
|
#define HACPCMR 0x2C
|
|
#define HACTIER 0x50
|
|
#define HACTSR 0x54
|
|
#define HACRIER 0x58
|
|
#define HACRSR 0x5C
|
|
#define HACACR 0x60
|
|
|
|
#define CR_CR (1 << 15) /* "codec-ready" indicator */
|
|
#define CR_CDRT (1 << 11) /* cold reset */
|
|
#define CR_WMRT (1 << 10) /* warm reset */
|
|
#define CR_B9 (1 << 9) /* the mysterious "bit 9" */
|
|
#define CR_ST (1 << 5) /* AC97 link start bit */
|
|
|
|
#define CSAR_RD (1 << 19) /* AC97 data read bit */
|
|
#define CSAR_WR (0)
|
|
|
|
#define TSR_CMDAMT (1 << 31)
|
|
#define TSR_CMDDMT (1 << 30)
|
|
|
|
#define RSR_STARY (1 << 22)
|
|
#define RSR_STDRY (1 << 21)
|
|
|
|
#define ACR_DMARX16 (1 << 30)
|
|
#define ACR_DMATX16 (1 << 29)
|
|
#define ACR_TX12ATOM (1 << 26)
|
|
#define ACR_DMARX20 ((1 << 24) | (1 << 22))
|
|
#define ACR_DMATX20 ((1 << 23) | (1 << 21))
|
|
|
|
#define CSDR_SHIFT 4
|
|
#define CSDR_MASK (0xffff << CSDR_SHIFT)
|
|
#define CSAR_SHIFT 12
|
|
#define CSAR_MASK (0x7f << CSAR_SHIFT)
|
|
|
|
#define AC97_WRITE_RETRY 1
|
|
#define AC97_READ_RETRY 5
|
|
|
|
/* manual-suggested AC97 codec access timeouts (us) */
|
|
#define TMO_E1 500 /* 21 < E1 < 1000 */
|
|
#define TMO_E2 13 /* 13 < E2 */
|
|
#define TMO_E3 21 /* 21 < E3 */
|
|
#define TMO_E4 500 /* 21 < E4 < 1000 */
|
|
|
|
struct hac_priv {
|
|
unsigned long mmio; /* HAC base address */
|
|
} hac_cpu_data[] = {
|
|
#if defined(CONFIG_CPU_SUBTYPE_SH7760)
|
|
{
|
|
.mmio = 0xFE240000,
|
|
},
|
|
{
|
|
.mmio = 0xFE250000,
|
|
},
|
|
#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
|
|
{
|
|
.mmio = 0xFFE40000,
|
|
},
|
|
#else
|
|
#error "Unsupported SuperH SoC"
|
|
#endif
|
|
};
|
|
|
|
#define HACREG(reg) (*(unsigned long *)(hac->mmio + (reg)))
|
|
|
|
/*
|
|
* AC97 read/write flow as outlined in the SH7760 manual (pages 903-906)
|
|
*/
|
|
static int hac_get_codec_data(struct hac_priv *hac, unsigned short r,
|
|
unsigned short *v)
|
|
{
|
|
unsigned int to1, to2, i;
|
|
unsigned short adr;
|
|
|
|
for (i = AC97_READ_RETRY; i; i--) {
|
|
*v = 0;
|
|
/* wait for HAC to receive something from the codec */
|
|
for (to1 = TMO_E4;
|
|
to1 && !(HACREG(HACRSR) & RSR_STARY);
|
|
--to1)
|
|
udelay(1);
|
|
for (to2 = TMO_E4;
|
|
to2 && !(HACREG(HACRSR) & RSR_STDRY);
|
|
--to2)
|
|
udelay(1);
|
|
|
|
if (!to1 && !to2)
|
|
return 0; /* codec comm is down */
|
|
|
|
adr = ((HACREG(HACCSAR) & CSAR_MASK) >> CSAR_SHIFT);
|
|
*v = ((HACREG(HACCSDR) & CSDR_MASK) >> CSDR_SHIFT);
|
|
|
|
HACREG(HACRSR) &= ~(RSR_STDRY | RSR_STARY);
|
|
|
|
if (r == adr)
|
|
break;
|
|
|
|
/* manual says: wait at least 21 usec before retrying */
|
|
udelay(21);
|
|
}
|
|
HACREG(HACRSR) &= ~(RSR_STDRY | RSR_STARY);
|
|
return i;
|
|
}
|
|
|
|
static unsigned short hac_read_codec_aux(struct hac_priv *hac,
|
|
unsigned short reg)
|
|
{
|
|
unsigned short val;
|
|
unsigned int i, to;
|
|
|
|
for (i = AC97_READ_RETRY; i; i--) {
|
|
/* send_read_request */
|
|
local_irq_disable();
|
|
HACREG(HACTSR) &= ~(TSR_CMDAMT);
|
|
HACREG(HACCSAR) = (reg << CSAR_SHIFT) | CSAR_RD;
|
|
local_irq_enable();
|
|
|
|
for (to = TMO_E3;
|
|
to && !(HACREG(HACTSR) & TSR_CMDAMT);
|
|
--to)
|
|
udelay(1);
|
|
|
|
HACREG(HACTSR) &= ~TSR_CMDAMT;
|
|
val = 0;
|
|
if (hac_get_codec_data(hac, reg, &val) != 0)
|
|
break;
|
|
}
|
|
|
|
return i ? val : ~0;
|
|
}
|
|
|
|
static void hac_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
|
|
unsigned short val)
|
|
{
|
|
int unit_id = 0 /* ac97->private_data */;
|
|
struct hac_priv *hac = &hac_cpu_data[unit_id];
|
|
unsigned int i, to;
|
|
/* write_codec_aux */
|
|
for (i = AC97_WRITE_RETRY; i; i--) {
|
|
/* send_write_request */
|
|
local_irq_disable();
|
|
HACREG(HACTSR) &= ~(TSR_CMDDMT | TSR_CMDAMT);
|
|
HACREG(HACCSDR) = (val << CSDR_SHIFT);
|
|
HACREG(HACCSAR) = (reg << CSAR_SHIFT) & (~CSAR_RD);
|
|
local_irq_enable();
|
|
|
|
/* poll-wait for CMDAMT and CMDDMT */
|
|
for (to = TMO_E1;
|
|
to && !(HACREG(HACTSR) & (TSR_CMDAMT|TSR_CMDDMT));
|
|
--to)
|
|
udelay(1);
|
|
|
|
HACREG(HACTSR) &= ~(TSR_CMDAMT | TSR_CMDDMT);
|
|
if (to)
|
|
break;
|
|
/* timeout, try again */
|
|
}
|
|
}
|
|
|
|
static unsigned short hac_ac97_read(struct snd_ac97 *ac97,
|
|
unsigned short reg)
|
|
{
|
|
int unit_id = 0 /* ac97->private_data */;
|
|
struct hac_priv *hac = &hac_cpu_data[unit_id];
|
|
return hac_read_codec_aux(hac, reg);
|
|
}
|
|
|
|
static void hac_ac97_warmrst(struct snd_ac97 *ac97)
|
|
{
|
|
int unit_id = 0 /* ac97->private_data */;
|
|
struct hac_priv *hac = &hac_cpu_data[unit_id];
|
|
unsigned int tmo;
|
|
|
|
HACREG(HACCR) = CR_WMRT | CR_ST | CR_B9;
|
|
msleep(10);
|
|
HACREG(HACCR) = CR_ST | CR_B9;
|
|
for (tmo = 1000; (tmo > 0) && !(HACREG(HACCR) & CR_CR); tmo--)
|
|
udelay(1);
|
|
|
|
if (!tmo)
|
|
printk(KERN_INFO "hac: reset: AC97 link down!\n");
|
|
/* settings this bit lets us have a conversation with codec */
|
|
HACREG(HACACR) |= ACR_TX12ATOM;
|
|
}
|
|
|
|
static void hac_ac97_coldrst(struct snd_ac97 *ac97)
|
|
{
|
|
int unit_id = 0 /* ac97->private_data */;
|
|
struct hac_priv *hac;
|
|
hac = &hac_cpu_data[unit_id];
|
|
|
|
HACREG(HACCR) = 0;
|
|
HACREG(HACCR) = CR_CDRT | CR_ST | CR_B9;
|
|
msleep(10);
|
|
hac_ac97_warmrst(ac97);
|
|
}
|
|
|
|
struct snd_ac97_bus_ops soc_ac97_ops = {
|
|
.read = hac_ac97_read,
|
|
.write = hac_ac97_write,
|
|
.reset = hac_ac97_coldrst,
|
|
.warm_reset = hac_ac97_warmrst,
|
|
};
|
|
EXPORT_SYMBOL_GPL(soc_ac97_ops);
|
|
|
|
static int hac_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = substream->private_data;
|
|
struct hac_priv *hac = &hac_cpu_data[rtd->dai->cpu_dai->id];
|
|
int d = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1;
|
|
|
|
switch (params->msbits) {
|
|
case 16:
|
|
HACREG(HACACR) |= d ? ACR_DMARX16 : ACR_DMATX16;
|
|
HACREG(HACACR) &= d ? ~ACR_DMARX20 : ~ACR_DMATX20;
|
|
break;
|
|
case 20:
|
|
HACREG(HACACR) &= d ? ~ACR_DMARX16 : ~ACR_DMATX16;
|
|
HACREG(HACACR) |= d ? ACR_DMARX20 : ACR_DMATX20;
|
|
break;
|
|
default:
|
|
pr_debug("hac: invalid depth %d bit\n", params->msbits);
|
|
return -EINVAL;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define AC97_RATES \
|
|
SNDRV_PCM_RATE_8000_192000
|
|
|
|
#define AC97_FMTS \
|
|
SNDRV_PCM_FMTBIT_S16_LE
|
|
|
|
struct snd_soc_dai sh4_hac_dai[] = {
|
|
{
|
|
.name = "HAC0",
|
|
.id = 0,
|
|
.ac97_control = 1,
|
|
.playback = {
|
|
.rates = AC97_RATES,
|
|
.formats = AC97_FMTS,
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
},
|
|
.capture = {
|
|
.rates = AC97_RATES,
|
|
.formats = AC97_FMTS,
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
},
|
|
.ops = {
|
|
.hw_params = hac_hw_params,
|
|
},
|
|
},
|
|
#ifdef CONFIG_CPU_SUBTYPE_SH7760
|
|
{
|
|
.name = "HAC1",
|
|
.ac97_control = 1,
|
|
.id = 1,
|
|
.playback = {
|
|
.rates = AC97_RATES,
|
|
.formats = AC97_FMTS,
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
},
|
|
.capture = {
|
|
.rates = AC97_RATES,
|
|
.formats = AC97_FMTS,
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
},
|
|
.ops = {
|
|
.hw_params = hac_hw_params,
|
|
},
|
|
|
|
},
|
|
#endif
|
|
};
|
|
EXPORT_SYMBOL_GPL(sh4_hac_dai);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("SuperH onchip HAC (AC97) audio driver");
|
|
MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");
|