forked from luck/tmp_suning_uos_patched
ddeccb8d6b
This adds a new driver to support the s3c24xx dma using the dmaengine and makes the old one in mach-s3c24xx obsolete in the long run. Conceptually the s3c24xx-dma feels like a distant relative of the pl08x with numerous virtual channels being mapped to a lot less physical ones. The driver therefore borrows a lot from the amba-pl08x driver in this regard. Functionality-wise the driver gains a memcpy ability in addition to the slave_sg one. The driver supports both the method for requesting the peripheral used by SoCs before the S3C2443 and the different method for S3C2443 and later. On earlier SoCs the hardware channels usable for specific peripherals is constrainted while on later SoCs all channels can be used for any peripheral. Tested on a s3c2416-based board, memcpy using the dmatest module and slave_sg partially using the spi-s3c64xx driver. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
379 lines
9.9 KiB
Plaintext
379 lines
9.9 KiB
Plaintext
#
|
|
# DMA engine configuration
|
|
#
|
|
|
|
menuconfig DMADEVICES
|
|
bool "DMA Engine support"
|
|
depends on HAS_DMA
|
|
help
|
|
DMA engines can do asynchronous data transfers without
|
|
involving the host CPU. Currently, this framework can be
|
|
used to offload memory copies in the network stack and
|
|
RAID operations in the MD driver. This menu only presents
|
|
DMA Device drivers supported by the configured arch, it may
|
|
be empty in some cases.
|
|
|
|
config DMADEVICES_DEBUG
|
|
bool "DMA Engine debugging"
|
|
depends on DMADEVICES != n
|
|
help
|
|
This is an option for use by developers; most people should
|
|
say N here. This enables DMA engine core and driver debugging.
|
|
|
|
config DMADEVICES_VDEBUG
|
|
bool "DMA Engine verbose debugging"
|
|
depends on DMADEVICES_DEBUG != n
|
|
help
|
|
This is an option for use by developers; most people should
|
|
say N here. This enables deeper (more verbose) debugging of
|
|
the DMA engine core and drivers.
|
|
|
|
|
|
if DMADEVICES
|
|
|
|
comment "DMA Devices"
|
|
|
|
config INTEL_MID_DMAC
|
|
tristate "Intel MID DMA support for Peripheral DMA controllers"
|
|
depends on PCI && X86
|
|
select DMA_ENGINE
|
|
default n
|
|
help
|
|
Enable support for the Intel(R) MID DMA engine present
|
|
in Intel MID chipsets.
|
|
|
|
Say Y here if you have such a chipset.
|
|
|
|
If unsure, say N.
|
|
|
|
config ASYNC_TX_ENABLE_CHANNEL_SWITCH
|
|
bool
|
|
|
|
config AMBA_PL08X
|
|
bool "ARM PrimeCell PL080 or PL081 support"
|
|
depends on ARM_AMBA
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Platform has a PL08x DMAC device
|
|
which can provide DMA engine support
|
|
|
|
config INTEL_IOATDMA
|
|
tristate "Intel I/OAT DMA support"
|
|
depends on PCI && X86
|
|
select DMA_ENGINE
|
|
select DCA
|
|
help
|
|
Enable support for the Intel(R) I/OAT DMA engine present
|
|
in recent Intel Xeon chipsets.
|
|
|
|
Say Y here if you have such a chipset.
|
|
|
|
If unsure, say N.
|
|
|
|
config INTEL_IOP_ADMA
|
|
tristate "Intel IOP ADMA support"
|
|
depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_IOP13XX
|
|
select DMA_ENGINE
|
|
select ASYNC_TX_ENABLE_CHANNEL_SWITCH
|
|
help
|
|
Enable support for the Intel(R) IOP Series RAID engines.
|
|
|
|
source "drivers/dma/dw/Kconfig"
|
|
|
|
config AT_HDMAC
|
|
tristate "Atmel AHB DMA support"
|
|
depends on ARCH_AT91
|
|
select DMA_ENGINE
|
|
help
|
|
Support the Atmel AHB DMA controller.
|
|
|
|
config FSL_DMA
|
|
tristate "Freescale Elo and Elo Plus DMA support"
|
|
depends on FSL_SOC
|
|
select DMA_ENGINE
|
|
select ASYNC_TX_ENABLE_CHANNEL_SWITCH
|
|
---help---
|
|
Enable support for the Freescale Elo and Elo Plus DMA controllers.
|
|
The Elo is the DMA controller on some 82xx and 83xx parts, and the
|
|
Elo Plus is the DMA controller on 85xx and 86xx parts.
|
|
|
|
config MPC512X_DMA
|
|
tristate "Freescale MPC512x built-in DMA engine support"
|
|
depends on PPC_MPC512x || PPC_MPC831x
|
|
select DMA_ENGINE
|
|
---help---
|
|
Enable support for the Freescale MPC512x built-in DMA engine.
|
|
|
|
source "drivers/dma/bestcomm/Kconfig"
|
|
|
|
config MV_XOR
|
|
bool "Marvell XOR engine support"
|
|
depends on PLAT_ORION
|
|
select DMA_ENGINE
|
|
select ASYNC_TX_ENABLE_CHANNEL_SWITCH
|
|
---help---
|
|
Enable support for the Marvell XOR engine.
|
|
|
|
config MX3_IPU
|
|
bool "MX3x Image Processing Unit support"
|
|
depends on ARCH_MXC
|
|
select DMA_ENGINE
|
|
default y
|
|
help
|
|
If you plan to use the Image Processing unit in the i.MX3x, say
|
|
Y here. If unsure, select Y.
|
|
|
|
config MX3_IPU_IRQS
|
|
int "Number of dynamically mapped interrupts for IPU"
|
|
depends on MX3_IPU
|
|
range 2 137
|
|
default 4
|
|
help
|
|
Out of 137 interrupt sources on i.MX31 IPU only very few are used.
|
|
To avoid bloating the irq_desc[] array we allocate a sufficient
|
|
number of IRQ slots and map them dynamically to specific sources.
|
|
|
|
config TXX9_DMAC
|
|
tristate "Toshiba TXx9 SoC DMA support"
|
|
depends on MACH_TX49XX || MACH_TX39XX
|
|
select DMA_ENGINE
|
|
help
|
|
Support the TXx9 SoC internal DMA controller. This can be
|
|
integrated in chips such as the Toshiba TX4927/38/39.
|
|
|
|
config TEGRA20_APB_DMA
|
|
bool "NVIDIA Tegra20 APB DMA support"
|
|
depends on ARCH_TEGRA
|
|
select DMA_ENGINE
|
|
help
|
|
Support for the NVIDIA Tegra20 APB DMA controller driver. The
|
|
DMA controller is having multiple DMA channel which can be
|
|
configured for different peripherals like audio, UART, SPI,
|
|
I2C etc which is in APB bus.
|
|
This DMA controller transfers data from memory to peripheral fifo
|
|
or vice versa. It does not support memory to memory data transfer.
|
|
|
|
config S3C24XX_DMAC
|
|
tristate "Samsung S3C24XX DMA support"
|
|
depends on ARCH_S3C24XX && !S3C24XX_DMA
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Support for the Samsung S3C24XX DMA controller driver. The
|
|
DMA controller is having multiple DMA channels which can be
|
|
configured for different peripherals like audio, UART, SPI.
|
|
The DMA controller can transfer data from memory to peripheral,
|
|
periphal to memory, periphal to periphal and memory to memory.
|
|
|
|
source "drivers/dma/sh/Kconfig"
|
|
|
|
config COH901318
|
|
bool "ST-Ericsson COH901318 DMA support"
|
|
select DMA_ENGINE
|
|
depends on ARCH_U300
|
|
help
|
|
Enable support for ST-Ericsson COH 901 318 DMA.
|
|
|
|
config STE_DMA40
|
|
bool "ST-Ericsson DMA40 support"
|
|
depends on ARCH_U8500
|
|
select DMA_ENGINE
|
|
help
|
|
Support for ST-Ericsson DMA40 controller
|
|
|
|
config AMCC_PPC440SPE_ADMA
|
|
tristate "AMCC PPC440SPe ADMA support"
|
|
depends on 440SPe || 440SP
|
|
select DMA_ENGINE
|
|
select ARCH_HAS_ASYNC_TX_FIND_CHANNEL
|
|
select ASYNC_TX_ENABLE_CHANNEL_SWITCH
|
|
help
|
|
Enable support for the AMCC PPC440SPe RAID engines.
|
|
|
|
config TIMB_DMA
|
|
tristate "Timberdale FPGA DMA support"
|
|
depends on MFD_TIMBERDALE || HAS_IOMEM
|
|
select DMA_ENGINE
|
|
help
|
|
Enable support for the Timberdale FPGA DMA engine.
|
|
|
|
config SIRF_DMA
|
|
tristate "CSR SiRFprimaII/SiRFmarco DMA support"
|
|
depends on ARCH_SIRF
|
|
select DMA_ENGINE
|
|
help
|
|
Enable support for the CSR SiRFprimaII DMA engine.
|
|
|
|
config TI_EDMA
|
|
bool "TI EDMA support"
|
|
depends on ARCH_DAVINCI || ARCH_OMAP
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
default n
|
|
help
|
|
Enable support for the TI EDMA controller. This DMA
|
|
engine is found on TI DaVinci and AM33xx parts.
|
|
|
|
config ARCH_HAS_ASYNC_TX_FIND_CHANNEL
|
|
bool
|
|
|
|
config PL330_DMA
|
|
tristate "DMA API Driver for PL330"
|
|
select DMA_ENGINE
|
|
depends on ARM_AMBA
|
|
help
|
|
Select if your platform has one or more PL330 DMACs.
|
|
You need to provide platform specific settings via
|
|
platform_data for a dma-pl330 device.
|
|
|
|
config PCH_DMA
|
|
tristate "Intel EG20T PCH / LAPIS Semicon IOH(ML7213/ML7223/ML7831) DMA"
|
|
depends on PCI && X86
|
|
select DMA_ENGINE
|
|
help
|
|
Enable support for Intel EG20T PCH DMA engine.
|
|
|
|
This driver also can be used for LAPIS Semiconductor IOH(Input/
|
|
Output Hub), ML7213, ML7223 and ML7831.
|
|
ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
|
|
for MP(Media Phone) use and ML7831 IOH is for general purpose use.
|
|
ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
|
|
ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
|
|
|
|
config IMX_SDMA
|
|
tristate "i.MX SDMA support"
|
|
depends on ARCH_MXC
|
|
select DMA_ENGINE
|
|
help
|
|
Support the i.MX SDMA engine. This engine is integrated into
|
|
Freescale i.MX25/31/35/51/53 chips.
|
|
|
|
config IMX_DMA
|
|
tristate "i.MX DMA support"
|
|
depends on ARCH_MXC
|
|
select DMA_ENGINE
|
|
help
|
|
Support the i.MX DMA engine. This engine is integrated into
|
|
Freescale i.MX1/21/27 chips.
|
|
|
|
config MXS_DMA
|
|
bool "MXS DMA support"
|
|
depends on SOC_IMX23 || SOC_IMX28 || SOC_IMX6Q
|
|
select STMP_DEVICE
|
|
select DMA_ENGINE
|
|
help
|
|
Support the MXS DMA engine. This engine including APBH-DMA
|
|
and APBX-DMA is integrated into Freescale i.MX23/28 chips.
|
|
|
|
config EP93XX_DMA
|
|
bool "Cirrus Logic EP93xx DMA support"
|
|
depends on ARCH_EP93XX
|
|
select DMA_ENGINE
|
|
help
|
|
Enable support for the Cirrus Logic EP93xx M2P/M2M DMA controller.
|
|
|
|
config DMA_SA11X0
|
|
tristate "SA-11x0 DMA support"
|
|
depends on ARCH_SA1100
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Support the DMA engine found on Intel StrongARM SA-1100 and
|
|
SA-1110 SoCs. This DMA engine can only be used with on-chip
|
|
devices.
|
|
|
|
config MMP_TDMA
|
|
bool "MMP Two-Channel DMA support"
|
|
depends on ARCH_MMP
|
|
select DMA_ENGINE
|
|
help
|
|
Support the MMP Two-Channel DMA engine.
|
|
This engine used for MMP Audio DMA and pxa910 SQU.
|
|
|
|
Say Y here if you enabled MMP ADMA, otherwise say N.
|
|
|
|
config DMA_OMAP
|
|
tristate "OMAP DMA support"
|
|
depends on ARCH_OMAP
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
|
|
config TI_CPPI41
|
|
tristate "AM33xx CPPI41 DMA support"
|
|
depends on ARCH_OMAP
|
|
select DMA_ENGINE
|
|
help
|
|
The Communications Port Programming Interface (CPPI) 4.1 DMA engine
|
|
is currently used by the USB driver on AM335x platforms.
|
|
|
|
config MMP_PDMA
|
|
bool "MMP PDMA support"
|
|
depends on (ARCH_MMP || ARCH_PXA)
|
|
select DMA_ENGINE
|
|
help
|
|
Support the MMP PDMA engine for PXA and MMP platfrom.
|
|
|
|
config DMA_JZ4740
|
|
tristate "JZ4740 DMA support"
|
|
depends on MACH_JZ4740
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
|
|
config K3_DMA
|
|
tristate "Hisilicon K3 DMA support"
|
|
depends on ARCH_HI3xxx
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Support the DMA engine for Hisilicon K3 platform
|
|
devices.
|
|
|
|
config DMA_ENGINE
|
|
bool
|
|
|
|
config DMA_VIRTUAL_CHANNELS
|
|
tristate
|
|
|
|
config DMA_ACPI
|
|
def_bool y
|
|
depends on ACPI
|
|
|
|
config DMA_OF
|
|
def_bool y
|
|
depends on OF
|
|
|
|
comment "DMA Clients"
|
|
depends on DMA_ENGINE
|
|
|
|
config NET_DMA
|
|
bool "Network: TCP receive copy offload"
|
|
depends on DMA_ENGINE && NET
|
|
default (INTEL_IOATDMA || FSL_DMA)
|
|
help
|
|
This enables the use of DMA engines in the network stack to
|
|
offload receive copy-to-user operations, freeing CPU cycles.
|
|
|
|
Say Y here if you enabled INTEL_IOATDMA or FSL_DMA, otherwise
|
|
say N.
|
|
|
|
config ASYNC_TX_DMA
|
|
bool "Async_tx: Offload support for the async_tx api"
|
|
depends on DMA_ENGINE
|
|
help
|
|
This allows the async_tx api to take advantage of offload engines for
|
|
memcpy, memset, xor, and raid6 p+q operations. If your platform has
|
|
a dma engine that can perform raid operations and you have enabled
|
|
MD_RAID456 say Y.
|
|
|
|
If unsure, say N.
|
|
|
|
config DMATEST
|
|
tristate "DMA Test client"
|
|
depends on DMA_ENGINE
|
|
help
|
|
Simple DMA test client. Say N unless you're debugging a
|
|
DMA Device driver.
|
|
|
|
endif
|