kernel_optimize_test/scripts/basic/fixdep.c
Masahiro Yamada 6f9ac9f442 fixdep: check return value of printf() and putchar()
When there is not enough space on your storage device, the build will
fail with 'No space left on device' error message.

The reason is obvious from the message, so you will free up some disk
space, then you will resume the build.

However, sometimes you may still see a mysterious error message:

  unterminated call to function 'wildcard': missing ')'.

If you run out of the disk space, fixdep may end up with generating
incomplete .*.cmd files.

For example, if the disk-full error occurs while fixdep is running
print_dep(), the .*.cmd might be truncated like this:

   $(wildcard include/config/

When you run 'make' next time, this broken .*.cmd will be included,
then Make will terminate parsing since it is a wrong syntax.

Once this happens, you need to run 'make clean' or delete the broken
.*.cmd file manually.

Even if you do not see any error message, the .*.cmd files after any
error could be potentially incomplete, and unreliable. You may miss
the re-compilation due to missing header dependency.

If printf() cannot output the string for disk shortage or whatever
reason, it returns a negative value, but currently fixdep does not
check it at all. Consequently, fixdep *successfully* generates a
broken .*.cmd file. Make never notices that since fixdep exits with 0,
which means success.

Given the intended usage of fixdep, it must respect the return value
of not only malloc(), but also printf() and putchar().

This seems a long-standing issue since the introduction of fixdep.

In old days, Kbuild tried to provide an extra safety by letting fixdep
output to a temporary file and renaming it after everything is done:

  scripts/basic/fixdep $(depfile) $@ '$(make-cmd)' > $(dot-target).tmp;\
  rm -f $(depfile);                                                    \
  mv -f $(dot-target).tmp $(dot-target).cmd)

It was no help to avoid the current issue; fixdep successfully created
a truncated tmp file, which would be renamed to a .*.cmd file.

This problem should be fixed by propagating the error status to the
build system because:

[1] Since commit 9c2af1c737 ("kbuild: add .DELETE_ON_ERROR special
    target"), Make will delete the target automatically on any failure
    in the recipe.

[2] Since commit 392885ee82 ("kbuild: let fixdep directly write to
    .*.cmd files"), .*.cmd file is included only when the corresponding
    target already exists.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-01 10:30:39 +09:00

411 lines
9.9 KiB
C

/*
* "Optimize" a list of dependencies as spit out by gcc -MD
* for the kernel build
* ===========================================================================
*
* Author Kai Germaschewski
* Copyright 2002 by Kai Germaschewski <kai.germaschewski@gmx.de>
*
* This software may be used and distributed according to the terms
* of the GNU General Public License, incorporated herein by reference.
*
*
* Introduction:
*
* gcc produces a very nice and correct list of dependencies which
* tells make when to remake a file.
*
* To use this list as-is however has the drawback that virtually
* every file in the kernel includes autoconf.h.
*
* If the user re-runs make *config, autoconf.h will be
* regenerated. make notices that and will rebuild every file which
* includes autoconf.h, i.e. basically all files. This is extremely
* annoying if the user just changed CONFIG_HIS_DRIVER from n to m.
*
* So we play the same trick that "mkdep" played before. We replace
* the dependency on autoconf.h by a dependency on every config
* option which is mentioned in any of the listed prerequisites.
*
* kconfig populates a tree in include/config/ with an empty file
* for each config symbol and when the configuration is updated
* the files representing changed config options are touched
* which then let make pick up the changes and the files that use
* the config symbols are rebuilt.
*
* So if the user changes his CONFIG_HIS_DRIVER option, only the objects
* which depend on "include/config/his/driver.h" will be rebuilt,
* so most likely only his driver ;-)
*
* The idea above dates, by the way, back to Michael E Chastain, AFAIK.
*
* So to get dependencies right, there are two issues:
* o if any of the files the compiler read changed, we need to rebuild
* o if the command line given to the compile the file changed, we
* better rebuild as well.
*
* The former is handled by using the -MD output, the later by saving
* the command line used to compile the old object and comparing it
* to the one we would now use.
*
* Again, also this idea is pretty old and has been discussed on
* kbuild-devel a long time ago. I don't have a sensibly working
* internet connection right now, so I rather don't mention names
* without double checking.
*
* This code here has been based partially based on mkdep.c, which
* says the following about its history:
*
* Copyright abandoned, Michael Chastain, <mailto:mec@shout.net>.
* This is a C version of syncdep.pl by Werner Almesberger.
*
*
* It is invoked as
*
* fixdep <depfile> <target> <cmdline>
*
* and will read the dependency file <depfile>
*
* The transformed dependency snipped is written to stdout.
*
* It first generates a line
*
* cmd_<target> = <cmdline>
*
* and then basically copies the .<target>.d file to stdout, in the
* process filtering out the dependency on autoconf.h and adding
* dependencies on include/config/my/option.h for every
* CONFIG_MY_OPTION encountered in any of the prerequisites.
*
* It will also filter out all the dependencies on *.ver. We need
* to make sure that the generated version checksum are globally up
* to date before even starting the recursive build, so it's too late
* at this point anyway.
*
* We don't even try to really parse the header files, but
* merely grep, i.e. if CONFIG_FOO is mentioned in a comment, it will
* be picked up as well. It's not a problem with respect to
* correctness, since that can only give too many dependencies, thus
* we cannot miss a rebuild. Since people tend to not mention totally
* unrelated CONFIG_ options all over the place, it's not an
* efficiency problem either.
*
* (Note: it'd be easy to port over the complete mkdep state machine,
* but I don't think the added complexity is worth it)
*/
#include <sys/types.h>
#include <sys/stat.h>
#include <unistd.h>
#include <fcntl.h>
#include <string.h>
#include <stdarg.h>
#include <stdlib.h>
#include <stdio.h>
#include <ctype.h>
static void usage(void)
{
fprintf(stderr, "Usage: fixdep <depfile> <target> <cmdline>\n");
exit(1);
}
/*
* In the intended usage of this program, the stdout is redirected to .*.cmd
* files. The return value of printf() and putchar() must be checked to catch
* any error, e.g. "No space left on device".
*/
static void xprintf(const char *format, ...)
{
va_list ap;
int ret;
va_start(ap, format);
ret = vprintf(format, ap);
if (ret < 0) {
perror("fixdep");
exit(1);
}
va_end(ap);
}
static void xputchar(int c)
{
int ret;
ret = putchar(c);
if (ret == EOF) {
perror("fixdep");
exit(1);
}
}
/*
* Print out a dependency path from a symbol name
*/
static void print_dep(const char *m, int slen, const char *dir)
{
int c, prev_c = '/', i;
xprintf(" $(wildcard %s/", dir);
for (i = 0; i < slen; i++) {
c = m[i];
if (c == '_')
c = '/';
else
c = tolower(c);
if (c != '/' || prev_c != '/')
xputchar(c);
prev_c = c;
}
xprintf(".h) \\\n");
}
struct item {
struct item *next;
unsigned int len;
unsigned int hash;
char name[0];
};
#define HASHSZ 256
static struct item *hashtab[HASHSZ];
static unsigned int strhash(const char *str, unsigned int sz)
{
/* fnv32 hash */
unsigned int i, hash = 2166136261U;
for (i = 0; i < sz; i++)
hash = (hash ^ str[i]) * 0x01000193;
return hash;
}
/*
* Lookup a value in the configuration string.
*/
static int is_defined_config(const char *name, int len, unsigned int hash)
{
struct item *aux;
for (aux = hashtab[hash % HASHSZ]; aux; aux = aux->next) {
if (aux->hash == hash && aux->len == len &&
memcmp(aux->name, name, len) == 0)
return 1;
}
return 0;
}
/*
* Add a new value to the configuration string.
*/
static void define_config(const char *name, int len, unsigned int hash)
{
struct item *aux = malloc(sizeof(*aux) + len);
if (!aux) {
perror("fixdep:malloc");
exit(1);
}
memcpy(aux->name, name, len);
aux->len = len;
aux->hash = hash;
aux->next = hashtab[hash % HASHSZ];
hashtab[hash % HASHSZ] = aux;
}
/*
* Record the use of a CONFIG_* word.
*/
static void use_config(const char *m, int slen)
{
unsigned int hash = strhash(m, slen);
if (is_defined_config(m, slen, hash))
return;
define_config(m, slen, hash);
print_dep(m, slen, "include/config");
}
/* test if s ends in sub */
static int str_ends_with(const char *s, int slen, const char *sub)
{
int sublen = strlen(sub);
if (sublen > slen)
return 0;
return !memcmp(s + slen - sublen, sub, sublen);
}
static void parse_config_file(const char *p)
{
const char *q, *r;
const char *start = p;
while ((p = strstr(p, "CONFIG_"))) {
if (p > start && (isalnum(p[-1]) || p[-1] == '_')) {
p += 7;
continue;
}
p += 7;
q = p;
while (*q && (isalnum(*q) || *q == '_'))
q++;
if (str_ends_with(p, q - p, "_MODULE"))
r = q - 7;
else
r = q;
if (r > p)
use_config(p, r - p);
p = q;
}
}
static void *read_file(const char *filename)
{
struct stat st;
int fd;
char *buf;
fd = open(filename, O_RDONLY);
if (fd < 0) {
fprintf(stderr, "fixdep: error opening file: ");
perror(filename);
exit(2);
}
if (fstat(fd, &st) < 0) {
fprintf(stderr, "fixdep: error fstat'ing file: ");
perror(filename);
exit(2);
}
buf = malloc(st.st_size + 1);
if (!buf) {
perror("fixdep: malloc");
exit(2);
}
if (read(fd, buf, st.st_size) != st.st_size) {
perror("fixdep: read");
exit(2);
}
buf[st.st_size] = '\0';
close(fd);
return buf;
}
/* Ignore certain dependencies */
static int is_ignored_file(const char *s, int len)
{
return str_ends_with(s, len, "include/generated/autoconf.h") ||
str_ends_with(s, len, "include/generated/autoksyms.h") ||
str_ends_with(s, len, ".ver");
}
/*
* Important: The below generated source_foo.o and deps_foo.o variable
* assignments are parsed not only by make, but also by the rather simple
* parser in scripts/mod/sumversion.c.
*/
static void parse_dep_file(char *m, const char *target)
{
char *p;
int is_last, is_target;
int saw_any_target = 0;
int is_first_dep = 0;
void *buf;
while (1) {
/* Skip any "white space" */
while (*m == ' ' || *m == '\\' || *m == '\n')
m++;
if (!*m)
break;
/* Find next "white space" */
p = m;
while (*p && *p != ' ' && *p != '\\' && *p != '\n')
p++;
is_last = (*p == '\0');
/* Is the token we found a target name? */
is_target = (*(p-1) == ':');
/* Don't write any target names into the dependency file */
if (is_target) {
/* The /next/ file is the first dependency */
is_first_dep = 1;
} else if (!is_ignored_file(m, p - m)) {
*p = '\0';
/*
* Do not list the source file as dependency, so that
* kbuild is not confused if a .c file is rewritten
* into .S or vice versa. Storing it in source_* is
* needed for modpost to compute srcversions.
*/
if (is_first_dep) {
/*
* If processing the concatenation of multiple
* dependency files, only process the first
* target name, which will be the original
* source name, and ignore any other target
* names, which will be intermediate temporary
* files.
*/
if (!saw_any_target) {
saw_any_target = 1;
xprintf("source_%s := %s\n\n",
target, m);
xprintf("deps_%s := \\\n", target);
}
is_first_dep = 0;
} else {
xprintf(" %s \\\n", m);
}
buf = read_file(m);
parse_config_file(buf);
free(buf);
}
if (is_last)
break;
/*
* Start searching for next token immediately after the first
* "whitespace" character that follows this token.
*/
m = p + 1;
}
if (!saw_any_target) {
fprintf(stderr, "fixdep: parse error; no targets found\n");
exit(1);
}
xprintf("\n%s: $(deps_%s)\n\n", target, target);
xprintf("$(deps_%s):\n", target);
}
int main(int argc, char *argv[])
{
const char *depfile, *target, *cmdline;
void *buf;
if (argc != 4)
usage();
depfile = argv[1];
target = argv[2];
cmdline = argv[3];
xprintf("cmd_%s := %s\n\n", target, cmdline);
buf = read_file(depfile);
parse_dep_file(buf, target);
free(buf);
return 0;
}