kernel_optimize_test/drivers/acpi/acpica/exstorob.c
Bob Moore ba494beeaa ACPICA: AcpiSrc: Fix some translation issues for Linux conversion
Fixes issues like this:

i_aSL -> iASL
00-7_f -> 00-7F
local_fADT -> local_FADT
execute_oSI -> execute_OSI

Also, in function headers, the parameters are now translated to
lower case (with underscores if necessary.)

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-07-17 00:05:51 -04:00

222 lines
7.1 KiB
C

/******************************************************************************
*
* Module Name: exstorob - AML Interpreter object store support, store to object
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include "accommon.h"
#include "acinterp.h"
#define _COMPONENT ACPI_EXECUTER
ACPI_MODULE_NAME("exstorob")
/*******************************************************************************
*
* FUNCTION: acpi_ex_store_buffer_to_buffer
*
* PARAMETERS: source_desc - Source object to copy
* target_desc - Destination object of the copy
*
* RETURN: Status
*
* DESCRIPTION: Copy a buffer object to another buffer object.
*
******************************************************************************/
acpi_status
acpi_ex_store_buffer_to_buffer(union acpi_operand_object *source_desc,
union acpi_operand_object *target_desc)
{
u32 length;
u8 *buffer;
ACPI_FUNCTION_TRACE_PTR(ex_store_buffer_to_buffer, source_desc);
/* If Source and Target are the same, just return */
if (source_desc == target_desc) {
return_ACPI_STATUS(AE_OK);
}
/* We know that source_desc is a buffer by now */
buffer = ACPI_CAST_PTR(u8, source_desc->buffer.pointer);
length = source_desc->buffer.length;
/*
* If target is a buffer of length zero or is a static buffer,
* allocate a new buffer of the proper length
*/
if ((target_desc->buffer.length == 0) ||
(target_desc->common.flags & AOPOBJ_STATIC_POINTER)) {
target_desc->buffer.pointer = ACPI_ALLOCATE(length);
if (!target_desc->buffer.pointer) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
target_desc->buffer.length = length;
}
/* Copy source buffer to target buffer */
if (length <= target_desc->buffer.length) {
/* Clear existing buffer and copy in the new one */
ACPI_MEMSET(target_desc->buffer.pointer, 0,
target_desc->buffer.length);
ACPI_MEMCPY(target_desc->buffer.pointer, buffer, length);
#ifdef ACPI_OBSOLETE_BEHAVIOR
/*
* NOTE: ACPI versions up to 3.0 specified that the buffer must be
* truncated if the string is smaller than the buffer. However, "other"
* implementations of ACPI never did this and thus became the defacto
* standard. ACPI 3.0A changes this behavior such that the buffer
* is no longer truncated.
*/
/*
* OBSOLETE BEHAVIOR:
* If the original source was a string, we must truncate the buffer,
* according to the ACPI spec. Integer-to-Buffer and Buffer-to-Buffer
* copy must not truncate the original buffer.
*/
if (original_src_type == ACPI_TYPE_STRING) {
/* Set the new length of the target */
target_desc->buffer.length = length;
}
#endif
} else {
/* Truncate the source, copy only what will fit */
ACPI_MEMCPY(target_desc->buffer.pointer, buffer,
target_desc->buffer.length);
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Truncating source buffer from %X to %X\n",
length, target_desc->buffer.length));
}
/* Copy flags */
target_desc->buffer.flags = source_desc->buffer.flags;
target_desc->common.flags &= ~AOPOBJ_STATIC_POINTER;
return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_ex_store_string_to_string
*
* PARAMETERS: source_desc - Source object to copy
* target_desc - Destination object of the copy
*
* RETURN: Status
*
* DESCRIPTION: Copy a String object to another String object
*
******************************************************************************/
acpi_status
acpi_ex_store_string_to_string(union acpi_operand_object *source_desc,
union acpi_operand_object *target_desc)
{
u32 length;
u8 *buffer;
ACPI_FUNCTION_TRACE_PTR(ex_store_string_to_string, source_desc);
/* If Source and Target are the same, just return */
if (source_desc == target_desc) {
return_ACPI_STATUS(AE_OK);
}
/* We know that source_desc is a string by now */
buffer = ACPI_CAST_PTR(u8, source_desc->string.pointer);
length = source_desc->string.length;
/*
* Replace existing string value if it will fit and the string
* pointer is not a static pointer (part of an ACPI table)
*/
if ((length < target_desc->string.length) &&
(!(target_desc->common.flags & AOPOBJ_STATIC_POINTER))) {
/*
* String will fit in existing non-static buffer.
* Clear old string and copy in the new one
*/
ACPI_MEMSET(target_desc->string.pointer, 0,
(acpi_size) target_desc->string.length + 1);
ACPI_MEMCPY(target_desc->string.pointer, buffer, length);
} else {
/*
* Free the current buffer, then allocate a new buffer
* large enough to hold the value
*/
if (target_desc->string.pointer &&
(!(target_desc->common.flags & AOPOBJ_STATIC_POINTER))) {
/* Only free if not a pointer into the DSDT */
ACPI_FREE(target_desc->string.pointer);
}
target_desc->string.pointer = ACPI_ALLOCATE_ZEROED((acpi_size)
length + 1);
if (!target_desc->string.pointer) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
target_desc->common.flags &= ~AOPOBJ_STATIC_POINTER;
ACPI_MEMCPY(target_desc->string.pointer, buffer, length);
}
/* Set the new target length */
target_desc->string.length = length;
return_ACPI_STATUS(AE_OK);
}