kernel_optimize_test/drivers/usb/dwc3/dwc3-pci.c
Felipe Balbi e3ec3eb794 usb: dwc3: pci: add nop transceiver support
We will be adding support for transceivers on
dwc3 driver but not all boards have controllable
transceivers.

For those which don't provide controllable transceivers
we will register nop transceivers.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-10 19:29:41 +03:00

241 lines
6.0 KiB
C

/**
* dwc3-pci.c - PCI Specific glue layer
*
* Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
*
* Authors: Felipe Balbi <balbi@ti.com>,
* Sebastian Andrzej Siewior <bigeasy@linutronix.de>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The names of the above-listed copyright holders may not be used
* to endorse or promote products derived from this software without
* specific prior written permission.
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2, as published by the Free
* Software Foundation.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
* IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
#include <linux/usb/otg.h>
#include <linux/usb/nop-usb-xceiv.h>
#include "core.h"
/* FIXME define these in <linux/pci_ids.h> */
#define PCI_VENDOR_ID_SYNOPSYS 0x16c3
#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 0xabcd
struct dwc3_pci {
struct device *dev;
struct platform_device *dwc3;
struct platform_device *usb2_phy;
struct platform_device *usb3_phy;
};
static int __devinit dwc3_pci_register_phys(struct dwc3_pci *glue)
{
struct nop_usb_xceiv_platform_data pdata;
struct platform_device *pdev;
int ret;
memset(&pdata, 0x00, sizeof(pdata));
pdev = platform_device_alloc("nop_usb_xceiv", 0);
if (!pdev)
return -ENOMEM;
glue->usb2_phy = pdev;
pdata.type = USB_PHY_TYPE_USB2;
ret = platform_device_add_data(glue->usb2_phy, &pdata, sizeof(pdata));
if (ret)
goto err1;
pdev = platform_device_alloc("nop_usb_xceiv", 1);
if (!pdev) {
ret = -ENOMEM;
goto err1;
}
glue->usb3_phy = pdev;
pdata.type = USB_PHY_TYPE_USB3;
ret = platform_device_add_data(glue->usb3_phy, &pdata, sizeof(pdata));
if (ret)
goto err2;
ret = platform_device_add(glue->usb2_phy);
if (ret)
goto err2;
ret = platform_device_add(glue->usb3_phy);
if (ret)
goto err3;
return 0;
err3:
platform_device_del(glue->usb2_phy);
err2:
platform_device_put(glue->usb3_phy);
err1:
platform_device_put(glue->usb2_phy);
return ret;
}
static int __devinit dwc3_pci_probe(struct pci_dev *pci,
const struct pci_device_id *id)
{
struct resource res[2];
struct platform_device *dwc3;
struct dwc3_pci *glue;
int ret = -ENOMEM;
int devid;
struct device *dev = &pci->dev;
glue = devm_kzalloc(dev, sizeof(*glue), GFP_KERNEL);
if (!glue) {
dev_err(dev, "not enough memory\n");
return -ENOMEM;
}
glue->dev = dev;
ret = pci_enable_device(pci);
if (ret) {
dev_err(dev, "failed to enable pci device\n");
return -ENODEV;
}
pci_set_power_state(pci, PCI_D0);
pci_set_master(pci);
ret = dwc3_pci_register_phys(glue);
if (ret) {
dev_err(dev, "couldn't register PHYs\n");
return ret;
}
devid = dwc3_get_device_id();
if (devid < 0) {
ret = -ENOMEM;
goto err1;
}
dwc3 = platform_device_alloc("dwc3", devid);
if (!dwc3) {
dev_err(dev, "couldn't allocate dwc3 device\n");
ret = -ENOMEM;
goto err1;
}
memset(res, 0x00, sizeof(struct resource) * ARRAY_SIZE(res));
res[0].start = pci_resource_start(pci, 0);
res[0].end = pci_resource_end(pci, 0);
res[0].name = "dwc_usb3";
res[0].flags = IORESOURCE_MEM;
res[1].start = pci->irq;
res[1].name = "dwc_usb3";
res[1].flags = IORESOURCE_IRQ;
ret = platform_device_add_resources(dwc3, res, ARRAY_SIZE(res));
if (ret) {
dev_err(dev, "couldn't add resources to dwc3 device\n");
goto err2;
}
pci_set_drvdata(pci, glue);
dma_set_coherent_mask(&dwc3->dev, dev->coherent_dma_mask);
dwc3->dev.dma_mask = dev->dma_mask;
dwc3->dev.dma_parms = dev->dma_parms;
dwc3->dev.parent = dev;
glue->dwc3 = dwc3;
ret = platform_device_add(dwc3);
if (ret) {
dev_err(dev, "failed to register dwc3 device\n");
goto err3;
}
return 0;
err3:
pci_set_drvdata(pci, NULL);
platform_device_put(dwc3);
err2:
dwc3_put_device_id(devid);
err1:
pci_disable_device(pci);
return ret;
}
static void __devexit dwc3_pci_remove(struct pci_dev *pci)
{
struct dwc3_pci *glue = pci_get_drvdata(pci);
platform_device_unregister(glue->usb2_phy);
platform_device_unregister(glue->usb3_phy);
dwc3_put_device_id(glue->dwc3->id);
platform_device_unregister(glue->dwc3);
pci_set_drvdata(pci, NULL);
pci_disable_device(pci);
}
static DEFINE_PCI_DEVICE_TABLE(dwc3_pci_id_table) = {
{
PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS,
PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3),
},
{ } /* Terminating Entry */
};
MODULE_DEVICE_TABLE(pci, dwc3_pci_id_table);
static struct pci_driver dwc3_pci_driver = {
.name = "dwc3-pci",
.id_table = dwc3_pci_id_table,
.probe = dwc3_pci_probe,
.remove = __devexit_p(dwc3_pci_remove),
};
MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_DESCRIPTION("DesignWare USB3 PCI Glue Layer");
module_pci_driver(dwc3_pci_driver);