kernel_optimize_test/arch/arm/mach-aaec2000/core.c
Thomas Gleixner 52e405eaa9 [PATCH] ARM: fixup irqflags breakage after ARM genirq merge
The irgflags consolidation did conflict with the ARM to generic IRQ
conversion and was not applied for ARM. Fix it up.

Use the new IRQF_ constants and remove the SA_INTERRUPT define

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 17:29:22 -07:00

285 lines
6.1 KiB
C

/*
* linux/arch/arm/mach-aaec2000/core.c
*
* Code common to all AAEC-2000 machines
*
* Copyright (c) 2005 Nicolas Bellido Y Ortega
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
#include <linux/timex.h>
#include <linux/signal.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/sizes.h>
#include <asm/mach/flash.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include "core.h"
#include "clock.h"
/*
* Common I/O mapping:
*
* Static virtual address mappings are as follow:
*
* 0xf8000000-0xf8001ffff: Devices connected to APB bus
* 0xf8002000-0xf8003ffff: Devices connected to AHB bus
*
* Below 0xe8000000 is reserved for vm allocation.
*
* The machine specific code must provide the extra mapping beside the
* default mapping provided here.
*/
static struct map_desc standard_io_desc[] __initdata = {
{
.virtual = VIO_APB_BASE,
.pfn = __phys_to_pfn(PIO_APB_BASE),
.length = IO_APB_LENGTH,
.type = MT_DEVICE
}, {
.virtual = VIO_AHB_BASE,
.pfn = __phys_to_pfn(PIO_AHB_BASE),
.length = IO_AHB_LENGTH,
.type = MT_DEVICE
}
};
void __init aaec2000_map_io(void)
{
iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
}
/*
* Interrupt handling routines
*/
static void aaec2000_int_ack(unsigned int irq)
{
IRQ_INTSR = 1 << irq;
}
static void aaec2000_int_mask(unsigned int irq)
{
IRQ_INTENC |= (1 << irq);
}
static void aaec2000_int_unmask(unsigned int irq)
{
IRQ_INTENS |= (1 << irq);
}
static struct irqchip aaec2000_irq_chip = {
.ack = aaec2000_int_ack,
.mask = aaec2000_int_mask,
.unmask = aaec2000_int_unmask,
};
void __init aaec2000_init_irq(void)
{
unsigned int i;
for (i = 0; i < NR_IRQS; i++) {
set_irq_handler(i, do_level_IRQ);
set_irq_chip(i, &aaec2000_irq_chip);
set_irq_flags(i, IRQF_VALID);
}
/* Disable all interrupts */
IRQ_INTENC = 0xffffffff;
/* Clear any pending interrupts */
IRQ_INTSR = IRQ_INTSR;
}
/*
* Time keeping
*/
/* IRQs are disabled before entering here from do_gettimeofday() */
static unsigned long aaec2000_gettimeoffset(void)
{
unsigned long ticks_to_match, elapsed, usec;
/* Get ticks before next timer match */
ticks_to_match = TIMER1_LOAD - TIMER1_VAL;
/* We need elapsed ticks since last match */
elapsed = LATCH - ticks_to_match;
/* Now, convert them to usec */
usec = (unsigned long)(elapsed * (tick_nsec / 1000))/LATCH;
return usec;
}
/* We enter here with IRQs enabled */
static irqreturn_t
aaec2000_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
/* TODO: Check timer accuracy */
write_seqlock(&xtime_lock);
timer_tick(regs);
TIMER1_CLEAR = 1;
write_sequnlock(&xtime_lock);
return IRQ_HANDLED;
}
static struct irqaction aaec2000_timer_irq = {
.name = "AAEC-2000 Timer Tick",
.flags = IRQF_DISABLED | IRQF_TIMER,
.handler = aaec2000_timer_interrupt,
};
static void __init aaec2000_timer_init(void)
{
/* Disable timer 1 */
TIMER1_CTRL = 0;
/* We have somehow to generate a 100Hz clock.
* We then use the 508KHz timer in periodic mode.
*/
TIMER1_LOAD = LATCH;
TIMER1_CLEAR = 1; /* Clear interrupt */
setup_irq(INT_TMR1_OFL, &aaec2000_timer_irq);
TIMER1_CTRL = TIMER_CTRL_ENABLE |
TIMER_CTRL_PERIODIC |
TIMER_CTRL_CLKSEL_508K;
}
struct sys_timer aaec2000_timer = {
.init = aaec2000_timer_init,
.offset = aaec2000_gettimeoffset,
};
static struct clcd_panel mach_clcd_panel;
static int aaec2000_clcd_setup(struct clcd_fb *fb)
{
dma_addr_t dma;
fb->panel = &mach_clcd_panel;
fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, SZ_1M,
&dma, GFP_KERNEL);
if (!fb->fb.screen_base) {
printk(KERN_ERR "CLCD: unable to map framebuffer\n");
return -ENOMEM;
}
fb->fb.fix.smem_start = dma;
fb->fb.fix.smem_len = SZ_1M;
return 0;
}
static int aaec2000_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
{
return dma_mmap_writecombine(&fb->dev->dev, vma,
fb->fb.screen_base,
fb->fb.fix.smem_start,
fb->fb.fix.smem_len);
}
static void aaec2000_clcd_remove(struct clcd_fb *fb)
{
dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
fb->fb.screen_base, fb->fb.fix.smem_start);
}
static struct clcd_board clcd_plat_data = {
.name = "AAEC-2000",
.check = clcdfb_check,
.decode = clcdfb_decode,
.setup = aaec2000_clcd_setup,
.mmap = aaec2000_clcd_mmap,
.remove = aaec2000_clcd_remove,
};
static struct amba_device clcd_device = {
.dev = {
.bus_id = "mb:16",
.coherent_dma_mask = ~0,
.platform_data = &clcd_plat_data,
},
.res = {
.start = AAEC_CLCD_PHYS,
.end = AAEC_CLCD_PHYS + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = { INT_LCD, NO_IRQ },
.periphid = 0x41110,
};
static struct amba_device *amba_devs[] __initdata = {
&clcd_device,
};
static struct clk aaec2000_clcd_clk = {
.name = "CLCDCLK",
};
void __init aaec2000_set_clcd_plat_data(struct aaec2000_clcd_info *clcd)
{
clcd_plat_data.enable = clcd->enable;
clcd_plat_data.disable = clcd->disable;
memcpy(&mach_clcd_panel, &clcd->panel, sizeof(struct clcd_panel));
}
static struct flash_platform_data aaec2000_flash_data = {
.map_name = "cfi_probe",
.width = 4,
};
static struct resource aaec2000_flash_resource = {
.start = AAEC_FLASH_BASE,
.end = AAEC_FLASH_BASE + AAEC_FLASH_SIZE,
.flags = IORESOURCE_MEM,
};
static struct platform_device aaec2000_flash_device = {
.name = "armflash",
.id = 0,
.dev = {
.platform_data = &aaec2000_flash_data,
},
.num_resources = 1,
.resource = &aaec2000_flash_resource,
};
static int __init aaec2000_init(void)
{
int i;
clk_register(&aaec2000_clcd_clk);
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
amba_device_register(d, &iomem_resource);
}
platform_device_register(&aaec2000_flash_device);
return 0;
};
arch_initcall(aaec2000_init);