AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
e6c462d3ec
kernel_optimize_test/arch/x86/Kconfig.cpu
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

482 lines
16 KiB
Plaintext
Raw Blame History

# SPDX-License-Identifier: GPL-2.0
# Put here option for CPU selection and depending optimization
choice
prompt "Processor family"
default M686 if X86_32
default GENERIC_CPU if X86_64
---help---
This is the processor type of your CPU. This information is
used for optimizing purposes. In order to compile a kernel
that can run on all supported x86 CPU types (albeit not
optimally fast), you can specify "486" here.
Note that the 386 is no longer supported, this includes
AMD/Cyrix/Intel 386DX/DXL/SL/SLC/SX, Cyrix/TI 486DLC/DLC2,
UMC 486SX-S and the NexGen Nx586.
The kernel will not necessarily run on earlier architectures than
the one you have chosen, e.g. a Pentium optimized kernel will run on
a PPro, but not necessarily on a i486.
Here are the settings recommended for greatest speed:
- "486" for the AMD/Cyrix/IBM/Intel 486DX/DX2/DX4 or
SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or U5S.
- "586" for generic Pentium CPUs lacking the TSC
(time stamp counter) register.
- "Pentium-Classic" for the Intel Pentium.
- "Pentium-MMX" for the Intel Pentium MMX.
- "Pentium-Pro" for the Intel Pentium Pro.
- "Pentium-II" for the Intel Pentium II or pre-Coppermine Celeron.
- "Pentium-III" for the Intel Pentium III or Coppermine Celeron.
- "Pentium-4" for the Intel Pentium 4 or P4-based Celeron.
- "K6" for the AMD K6, K6-II and K6-III (aka K6-3D).
- "Athlon" for the AMD K7 family (Athlon/Duron/Thunderbird).
- "Opteron/Athlon64/Hammer/K8" for all K8 and newer AMD CPUs.
- "Crusoe" for the Transmeta Crusoe series.
- "Efficeon" for the Transmeta Efficeon series.
- "Winchip-C6" for original IDT Winchip.
- "Winchip-2" for IDT Winchips with 3dNow! capabilities.
- "AMD Elan" for the 32-bit AMD Elan embedded CPU.
- "GeodeGX1" for Geode GX1 (Cyrix MediaGX).
- "Geode GX/LX" For AMD Geode GX and LX processors.
- "CyrixIII/VIA C3" for VIA Cyrix III or VIA C3.
- "VIA C3-2" for VIA C3-2 "Nehemiah" (model 9 and above).
- "VIA C7" for VIA C7.
- "Intel P4" for the Pentium 4/Netburst microarchitecture.
- "Core 2/newer Xeon" for all core2 and newer Intel CPUs.
- "Intel Atom" for the Atom-microarchitecture CPUs.
- "Generic-x86-64" for a kernel which runs on any x86-64 CPU.
See each option's help text for additional details. If you don't know
what to do, choose "486".
config M486
bool "486"
depends on X86_32
---help---
Select this for an 486-class CPU such as AMD/Cyrix/IBM/Intel
486DX/DX2/DX4 or SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or U5S.
config M586
bool "586/K5/5x86/6x86/6x86MX"
depends on X86_32
---help---
Select this for an 586 or 686 series processor such as the AMD K5,
the Cyrix 5x86, 6x86 and 6x86MX. This choice does not
assume the RDTSC (Read Time Stamp Counter) instruction.
config M586TSC
bool "Pentium-Classic"
depends on X86_32
---help---
Select this for a Pentium Classic processor with the RDTSC (Read
Time Stamp Counter) instruction for benchmarking.
config M586MMX
bool "Pentium-MMX"
depends on X86_32
---help---
Select this for a Pentium with the MMX graphics/multimedia
extended instructions.
config M686
bool "Pentium-Pro"
depends on X86_32
---help---
Select this for Intel Pentium Pro chips. This enables the use of
Pentium Pro extended instructions, and disables the init-time guard
against the f00f bug found in earlier Pentiums.
config MPENTIUMII
bool "Pentium-II/Celeron(pre-Coppermine)"
depends on X86_32
---help---
Select this for Intel chips based on the Pentium-II and
pre-Coppermine Celeron core. This option enables an unaligned
copy optimization, compiles the kernel with optimization flags
tailored for the chip, and applies any applicable Pentium Pro
optimizations.
config MPENTIUMIII
bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon"
depends on X86_32
---help---
Select this for Intel chips based on the Pentium-III and
Celeron-Coppermine core. This option enables use of some
extended prefetch instructions in addition to the Pentium II
extensions.
config MPENTIUMM
bool "Pentium M"
depends on X86_32
---help---
Select this for Intel Pentium M (not Pentium-4 M)
notebook chips.
config MPENTIUM4
bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/older Xeon"
depends on X86_32
---help---
Select this for Intel Pentium 4 chips. This includes the
Pentium 4, Pentium D, P4-based Celeron and Xeon, and
Pentium-4 M (not Pentium M) chips. This option enables compile
flags optimized for the chip, uses the correct cache line size, and
applies any applicable optimizations.
CPUIDs: F[0-6][1-A] (in /proc/cpuinfo show = cpu family : 15 )
Select this for:
Pentiums (Pentium 4, Pentium D, Celeron, Celeron D) corename:
-Willamette
-Northwood
-Mobile Pentium 4
-Mobile Pentium 4 M
-Extreme Edition (Gallatin)
-Prescott
-Prescott 2M
-Cedar Mill
-Presler
-Smithfiled
Xeons (Intel Xeon, Xeon MP, Xeon LV, Xeon MV) corename:
-Foster
-Prestonia
-Gallatin
-Nocona
-Irwindale
-Cranford
-Potomac
-Paxville
-Dempsey
config MK6
bool "K6/K6-II/K6-III"
depends on X86_32
---help---
Select this for an AMD K6-family processor. Enables use of
some extended instructions, and passes appropriate optimization
flags to GCC.
config MK7
bool "Athlon/Duron/K7"
depends on X86_32
---help---
Select this for an AMD Athlon K7-family processor. Enables use of
some extended instructions, and passes appropriate optimization
flags to GCC.
config MK8
bool "Opteron/Athlon64/Hammer/K8"
---help---
Select this for an AMD Opteron or Athlon64 Hammer-family processor.
Enables use of some extended instructions, and passes appropriate
optimization flags to GCC.
config MCRUSOE
bool "Crusoe"
depends on X86_32
---help---
Select this for a Transmeta Crusoe processor. Treats the processor
like a 586 with TSC, and sets some GCC optimization flags (like a
Pentium Pro with no alignment requirements).
config MEFFICEON
bool "Efficeon"
depends on X86_32
---help---
Select this for a Transmeta Efficeon processor.
config MWINCHIPC6
bool "Winchip-C6"
depends on X86_32
---help---
Select this for an IDT Winchip C6 chip. Linux and GCC
treat this chip as a 586TSC with some extended instructions
and alignment requirements.
config MWINCHIP3D
bool "Winchip-2/Winchip-2A/Winchip-3"
depends on X86_32
---help---
Select this for an IDT Winchip-2, 2A or 3. Linux and GCC
treat this chip as a 586TSC with some extended instructions
and alignment requirements. Also enable out of order memory
stores for this CPU, which can increase performance of some
operations.
config MELAN
bool "AMD Elan"
depends on X86_32
---help---
Select this for an AMD Elan processor.
Do not use this option for K6/Athlon/Opteron processors!
config MGEODEGX1
bool "GeodeGX1"
depends on X86_32
---help---
Select this for a Geode GX1 (Cyrix MediaGX) chip.
config MGEODE_LX
bool "Geode GX/LX"
depends on X86_32
---help---
Select this for AMD Geode GX and LX processors.
config MCYRIXIII
bool "CyrixIII/VIA-C3"
depends on X86_32
---help---
Select this for a Cyrix III or C3 chip. Presently Linux and GCC
treat this chip as a generic 586. Whilst the CPU is 686 class,
it lacks the cmov extension which gcc assumes is present when
generating 686 code.
Note that Nehemiah (Model 9) and above will not boot with this
kernel due to them lacking the 3DNow! instructions used in earlier
incarnations of the CPU.
config MVIAC3_2
bool "VIA C3-2 (Nehemiah)"
depends on X86_32
---help---
Select this for a VIA C3 "Nehemiah". Selecting this enables usage
of SSE and tells gcc to treat the CPU as a 686.
Note, this kernel will not boot on older (pre model 9) C3s.
config MVIAC7
bool "VIA C7"
depends on X86_32
---help---
Select this for a VIA C7. Selecting this uses the correct cache
shift and tells gcc to treat the CPU as a 686.
config MPSC
bool "Intel P4 / older Netburst based Xeon"
depends on X86_64
---help---
Optimize for Intel Pentium 4, Pentium D and older Nocona/Dempsey
Xeon CPUs with Intel 64bit which is compatible with x86-64.
Note that the latest Xeons (Xeon 51xx and 53xx) are not based on the
Netburst core and shouldn't use this option. You can distinguish them
using the cpu family field
in /proc/cpuinfo. Family 15 is an older Xeon, Family 6 a newer one.
config MCORE2
bool "Core 2/newer Xeon"
---help---
Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and
53xx) CPUs. You can distinguish newer from older Xeons by the CPU
family in /proc/cpuinfo. Newer ones have 6 and older ones 15
(not a typo)
config MATOM
bool "Intel Atom"
---help---
Select this for the Intel Atom platform. Intel Atom CPUs have an
in-order pipelining architecture and thus can benefit from
accordingly optimized code. Use a recent GCC with specific Atom
support in order to fully benefit from selecting this option.
config GENERIC_CPU
bool "Generic-x86-64"
depends on X86_64
---help---
Generic x86-64 CPU.
Run equally well on all x86-64 CPUs.
endchoice
config X86_GENERIC
bool "Generic x86 support"
depends on X86_32
---help---
Instead of just including optimizations for the selected
x86 variant (e.g. PII, Crusoe or Athlon), include some more
generic optimizations as well. This will make the kernel
perform better on x86 CPUs other than that selected.
This is really intended for distributors who need more
generic optimizations.
#
# Define implied options from the CPU selection here
config X86_INTERNODE_CACHE_SHIFT
int
default "12" if X86_VSMP
default X86_L1_CACHE_SHIFT
config X86_L1_CACHE_SHIFT
int
default "7" if MPENTIUM4 || MPSC
default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MATOM || MVIAC7 || X86_GENERIC || GENERIC_CPU
default "4" if MELAN || M486 || MGEODEGX1
default "5" if MWINCHIP3D || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODE_LX
config X86_PPRO_FENCE
bool "PentiumPro memory ordering errata workaround"
depends on M686 || M586MMX || M586TSC || M586 || M486 || MGEODEGX1
---help---
Old PentiumPro multiprocessor systems had errata that could cause
memory operations to violate the x86 ordering standard in rare cases.
Enabling this option will attempt to work around some (but not all)
occurrences of this problem, at the cost of much heavier spinlock and
memory barrier operations.
If unsure, say n here. Even distro kernels should think twice before
enabling this: there are few systems, and an unlikely bug.
config X86_F00F_BUG
def_bool y
depends on M586MMX || M586TSC || M586 || M486
config X86_INVD_BUG
def_bool y
depends on M486
config X86_ALIGNMENT_16
def_bool y
depends on MWINCHIP3D || MWINCHIPC6 || MCYRIXIII || MELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1
config X86_INTEL_USERCOPY
def_bool y
depends on MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M586MMX || X86_GENERIC || MK8 || MK7 || MEFFICEON || MCORE2
config X86_USE_PPRO_CHECKSUM
def_bool y
depends on MWINCHIP3D || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MVIAC7 || MEFFICEON || MGEODE_LX || MCORE2 || MATOM
config X86_USE_3DNOW
def_bool y
depends on (MCYRIXIII || MK7 || MGEODE_LX) && !UML
#
# P6_NOPs are a relatively minor optimization that require a family >=
# 6 processor, except that it is broken on certain VIA chips.
# Furthermore, AMD chips prefer a totally different sequence of NOPs
# (which work on all CPUs). In addition, it looks like Virtual PC
# does not understand them.
#
# As a result, disallow these if we're not compiling for X86_64 (these
# NOPs do work on all x86-64 capable chips); the list of processors in
# the right-hand clause are the cores that benefit from this optimization.
#
config X86_P6_NOP
def_bool y
depends on X86_64
depends on (MCORE2 || MPENTIUM4 || MPSC)
config X86_TSC
def_bool y
depends on (MWINCHIP3D || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2 || MATOM) || X86_64
config X86_CMPXCHG64
def_bool y
depends on X86_PAE || X86_64 || MCORE2 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MATOM
# this should be set for all -march=.. options where the compiler
# generates cmov.
config X86_CMOV
def_bool y
depends on (MK8 || MK7 || MCORE2 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7 || MCRUSOE || MEFFICEON || X86_64 || MATOM || MGEODE_LX)
config X86_MINIMUM_CPU_FAMILY
int
default "64" if X86_64
default "6" if X86_32 && X86_P6_NOP
default "5" if X86_32 && X86_CMPXCHG64
default "4"
config X86_DEBUGCTLMSR
def_bool y
depends on !(MK6 || MWINCHIPC6 || MWINCHIP3D || MCYRIXIII || M586MMX || M586TSC || M586 || M486) && !UML
menuconfig PROCESSOR_SELECT
bool "Supported processor vendors" if EXPERT
---help---
This lets you choose what x86 vendor support code your kernel
will include.
config CPU_SUP_INTEL
default y
bool "Support Intel processors" if PROCESSOR_SELECT
---help---
This enables detection, tunings and quirks for Intel processors
You need this enabled if you want your kernel to run on an
Intel CPU. Disabling this option on other types of CPUs
makes the kernel a tiny bit smaller. Disabling it on an Intel
CPU might render the kernel unbootable.
If unsure, say N.
config CPU_SUP_CYRIX_32
default y
bool "Support Cyrix processors" if PROCESSOR_SELECT
depends on M486 || M586 || M586TSC || M586MMX || (EXPERT && !64BIT)
---help---
This enables detection, tunings and quirks for Cyrix processors
You need this enabled if you want your kernel to run on a
Cyrix CPU. Disabling this option on other types of CPUs
makes the kernel a tiny bit smaller. Disabling it on a Cyrix
CPU might render the kernel unbootable.
If unsure, say N.
config CPU_SUP_AMD
default y
bool "Support AMD processors" if PROCESSOR_SELECT
---help---
This enables detection, tunings and quirks for AMD processors
You need this enabled if you want your kernel to run on an
AMD CPU. Disabling this option on other types of CPUs
makes the kernel a tiny bit smaller. Disabling it on an AMD
CPU might render the kernel unbootable.
If unsure, say N.
config CPU_SUP_CENTAUR
default y
bool "Support Centaur processors" if PROCESSOR_SELECT
---help---
This enables detection, tunings and quirks for Centaur processors
You need this enabled if you want your kernel to run on a
Centaur CPU. Disabling this option on other types of CPUs
makes the kernel a tiny bit smaller. Disabling it on a Centaur
CPU might render the kernel unbootable.
If unsure, say N.
config CPU_SUP_TRANSMETA_32
default y
bool "Support Transmeta processors" if PROCESSOR_SELECT
depends on !64BIT
---help---
This enables detection, tunings and quirks for Transmeta processors
You need this enabled if you want your kernel to run on a
Transmeta CPU. Disabling this option on other types of CPUs
makes the kernel a tiny bit smaller. Disabling it on a Transmeta
CPU might render the kernel unbootable.
If unsure, say N.
config CPU_SUP_UMC_32
default y
bool "Support UMC processors" if PROCESSOR_SELECT
depends on M486 || (EXPERT && !64BIT)
---help---
This enables detection, tunings and quirks for UMC processors
You need this enabled if you want your kernel to run on a
UMC CPU. Disabling this option on other types of CPUs
makes the kernel a tiny bit smaller. Disabling it on a UMC
CPU might render the kernel unbootable.
If unsure, say N.
View Git Blame Copy Permalink