forked from luck/tmp_suning_uos_patched
b924b20470
As the FS USB code is not being actively used for omap2+ there's no point keeping it around for omap2+. Let's make the FS USB platform init code omap1 only so we can remove the last user of omap_read/write for omap2+, and simplify things for further USB, DMA, and device tree related work. While at it, also group the mach includes for the related drivers. Cc: linux-usb@vger.kernel.org Cc: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
174 lines
4.8 KiB
C
174 lines
4.8 KiB
C
// include/asm-arm/mach-omap/usb.h
|
|
|
|
#ifndef __ASM_ARCH_OMAP_USB_H
|
|
#define __ASM_ARCH_OMAP_USB_H
|
|
|
|
#include <linux/io.h>
|
|
#include <linux/usb/musb.h>
|
|
#include <plat/board.h>
|
|
|
|
#define OMAP3_HS_USB_PORTS 3
|
|
|
|
enum usbhs_omap_port_mode {
|
|
OMAP_USBHS_PORT_MODE_UNUSED,
|
|
OMAP_EHCI_PORT_MODE_PHY,
|
|
OMAP_EHCI_PORT_MODE_TLL,
|
|
OMAP_EHCI_PORT_MODE_HSIC,
|
|
OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0,
|
|
OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM,
|
|
OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0,
|
|
OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM,
|
|
OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0,
|
|
OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM,
|
|
OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0,
|
|
OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM,
|
|
OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0,
|
|
OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM
|
|
};
|
|
|
|
struct usbhs_omap_board_data {
|
|
enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
|
|
|
|
/* have to be valid if phy_reset is true and portx is in phy mode */
|
|
int reset_gpio_port[OMAP3_HS_USB_PORTS];
|
|
|
|
/* Set this to true for ES2.x silicon */
|
|
unsigned es2_compatibility:1;
|
|
|
|
unsigned phy_reset:1;
|
|
|
|
/*
|
|
* Regulators for USB PHYs.
|
|
* Each PHY can have a separate regulator.
|
|
*/
|
|
struct regulator *regulator[OMAP3_HS_USB_PORTS];
|
|
};
|
|
|
|
#ifdef CONFIG_ARCH_OMAP2PLUS
|
|
|
|
struct ehci_hcd_omap_platform_data {
|
|
enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
|
|
int reset_gpio_port[OMAP3_HS_USB_PORTS];
|
|
struct regulator *regulator[OMAP3_HS_USB_PORTS];
|
|
unsigned phy_reset:1;
|
|
};
|
|
|
|
struct ohci_hcd_omap_platform_data {
|
|
enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
|
|
unsigned es2_compatibility:1;
|
|
};
|
|
|
|
struct usbhs_omap_platform_data {
|
|
enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
|
|
|
|
struct ehci_hcd_omap_platform_data *ehci_data;
|
|
struct ohci_hcd_omap_platform_data *ohci_data;
|
|
};
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
struct omap_musb_board_data {
|
|
u8 interface_type;
|
|
u8 mode;
|
|
u16 power;
|
|
unsigned extvbus:1;
|
|
void (*set_phy_power)(u8 on);
|
|
void (*clear_irq)(void);
|
|
void (*set_mode)(u8 mode);
|
|
void (*reset)(void);
|
|
};
|
|
|
|
enum musb_interface {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
|
|
|
|
extern void usb_musb_init(struct omap_musb_board_data *board_data);
|
|
|
|
extern void usbhs_init(const struct usbhs_omap_board_data *pdata);
|
|
|
|
extern int omap4430_phy_power(struct device *dev, int ID, int on);
|
|
extern int omap4430_phy_set_clk(struct device *dev, int on);
|
|
extern int omap4430_phy_init(struct device *dev);
|
|
extern int omap4430_phy_exit(struct device *dev);
|
|
extern int omap4430_phy_suspend(struct device *dev, int suspend);
|
|
|
|
#endif
|
|
|
|
extern void am35x_musb_reset(void);
|
|
extern void am35x_musb_phy_power(u8 on);
|
|
extern void am35x_musb_clear_irq(void);
|
|
extern void am35x_set_mode(u8 musb_mode);
|
|
extern void ti81xx_musb_phy_power(u8 on);
|
|
|
|
/* AM35x */
|
|
/* USB 2.0 PHY Control */
|
|
#define CONF2_PHY_GPIOMODE (1 << 23)
|
|
#define CONF2_OTGMODE (3 << 14)
|
|
#define CONF2_NO_OVERRIDE (0 << 14)
|
|
#define CONF2_FORCE_HOST (1 << 14)
|
|
#define CONF2_FORCE_DEVICE (2 << 14)
|
|
#define CONF2_FORCE_HOST_VBUS_LOW (3 << 14)
|
|
#define CONF2_SESENDEN (1 << 13)
|
|
#define CONF2_VBDTCTEN (1 << 12)
|
|
#define CONF2_REFFREQ_24MHZ (2 << 8)
|
|
#define CONF2_REFFREQ_26MHZ (7 << 8)
|
|
#define CONF2_REFFREQ_13MHZ (6 << 8)
|
|
#define CONF2_REFFREQ (0xf << 8)
|
|
#define CONF2_PHYCLKGD (1 << 7)
|
|
#define CONF2_VBUSSENSE (1 << 6)
|
|
#define CONF2_PHY_PLLON (1 << 5)
|
|
#define CONF2_RESET (1 << 4)
|
|
#define CONF2_PHYPWRDN (1 << 3)
|
|
#define CONF2_OTGPWRDN (1 << 2)
|
|
#define CONF2_DATPOL (1 << 1)
|
|
|
|
/* TI81XX specific definitions */
|
|
#define USBCTRL0 0x620
|
|
#define USBSTAT0 0x624
|
|
|
|
/* TI816X PHY controls bits */
|
|
#define TI816X_USBPHY0_NORMAL_MODE (1 << 0)
|
|
#define TI816X_USBPHY_REFCLK_OSC (1 << 8)
|
|
|
|
/* TI814X PHY controls bits */
|
|
#define USBPHY_CM_PWRDN (1 << 0)
|
|
#define USBPHY_OTG_PWRDN (1 << 1)
|
|
#define USBPHY_CHGDET_DIS (1 << 2)
|
|
#define USBPHY_CHGDET_RSTRT (1 << 3)
|
|
#define USBPHY_SRCONDM (1 << 4)
|
|
#define USBPHY_SINKONDP (1 << 5)
|
|
#define USBPHY_CHGISINK_EN (1 << 6)
|
|
#define USBPHY_CHGVSRC_EN (1 << 7)
|
|
#define USBPHY_DMPULLUP (1 << 8)
|
|
#define USBPHY_DPPULLUP (1 << 9)
|
|
#define USBPHY_CDET_EXTCTL (1 << 10)
|
|
#define USBPHY_GPIO_MODE (1 << 12)
|
|
#define USBPHY_DPOPBUFCTL (1 << 13)
|
|
#define USBPHY_DMOPBUFCTL (1 << 14)
|
|
#define USBPHY_DPINPUT (1 << 15)
|
|
#define USBPHY_DMINPUT (1 << 16)
|
|
#define USBPHY_DPGPIO_PD (1 << 17)
|
|
#define USBPHY_DMGPIO_PD (1 << 18)
|
|
#define USBPHY_OTGVDET_EN (1 << 19)
|
|
#define USBPHY_OTGSESSEND_EN (1 << 20)
|
|
#define USBPHY_DATA_POLARITY (1 << 23)
|
|
|
|
#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_USB)
|
|
u32 omap1_usb0_init(unsigned nwires, unsigned is_device);
|
|
u32 omap1_usb1_init(unsigned nwires);
|
|
u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup);
|
|
#else
|
|
static inline u32 omap1_usb0_init(unsigned nwires, unsigned is_device)
|
|
{
|
|
return 0;
|
|
}
|
|
static inline u32 omap1_usb1_init(unsigned nwires)
|
|
{
|
|
return 0;
|
|
|
|
}
|
|
static inline u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#endif /* __ASM_ARCH_OMAP_USB_H */
|