forked from luck/tmp_suning_uos_patched
e8a0b37d28
Pull ARM updates from Russell King: "Bigger items included in this update are: - A series of updates from Arnd for ARM randconfig build failures - Updates from Dmitry for StrongARM SA-1100 to move IRQ handling to drivers/irqchip/ - Move ARMs SP804 timer to drivers/clocksource/ - Perf updates from Mark Rutland in preparation to move the ARM perf code into drivers/ so it can be shared with ARM64. - MCPM updates from Nicolas - Add support for taking platform serial number from DT - Re-implement Keystone2 physical address space switch to conform to architecture requirements - Clean up ARMv7 LPAE code, which goes in hand with the Keystone2 changes. - L2C cleanups to avoid unlocking caches if we're prevented by the secure support to unlock. - Avoid cleaning a potentially dirty cache containing stale data on CPU initialisation - Add ARM-only entry point for secondary startup (for machines that can only call into a Thumb kernel in ARM mode). Same thing is also done for the resume entry point. - Provide arch_irqs_disabled via asm-generic - Enlarge ARMv7M vector table - Always use BFD linker for VDSO, as gold doesn't accept some of the options we need. - Fix an incorrect BSYM (for Thumb symbols) usage, and convert all BSYM compiler macros to a "badr" (for branch address). - Shut up compiler warnings provoked by our cmpxchg() implementation. - Ensure bad xchg sizes fail to link" * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (75 commits) ARM: Fix build if CLKDEV_LOOKUP is not configured ARM: fix new BSYM() usage introduced via for-arm-soc branch ARM: 8383/1: nommu: avoid deprecated source register on mov ARM: 8391/1: l2c: add options to overwrite prefetching behavior ARM: 8390/1: irqflags: Get arch_irqs_disabled from asm-generic ARM: 8387/1: arm/mm/dma-mapping.c: Add arm_coherent_dma_mmap ARM: 8388/1: tcm: Don't crash when TCM banks are protected by TrustZone ARM: 8384/1: VDSO: force use of BFD linker ARM: 8385/1: VDSO: group link options ARM: cmpxchg: avoid warnings from macro-ized cmpxchg() implementations ARM: remove __bad_xchg definition ARM: 8369/1: ARMv7M: define size of vector table for Vybrid ARM: 8382/1: clocksource: make ARM_TIMER_SP804 depend on GENERIC_SCHED_CLOCK ARM: 8366/1: move Dual-Timer SP804 driver to drivers/clocksource ARM: 8365/1: introduce sp804_timer_disable and remove arm_timer.h inclusion ARM: 8364/1: fix BE32 module loading ARM: 8360/1: add secondary_startup_arm prototype in header file ARM: 8359/1: correct secondary_startup_arm mode ARM: proc-v7: sanitise and document registers around errata ARM: proc-v7: clean up MIDR access ...
212 lines
5.4 KiB
C
212 lines
5.4 KiB
C
/*
|
|
* Integrator/AP timer driver
|
|
* Copyright (C) 2000-2003 Deep Blue Solutions Ltd
|
|
* Copyright (c) 2014, Linaro Limited
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/clocksource.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/clockchips.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/sched_clock.h>
|
|
|
|
#include "timer-sp.h"
|
|
|
|
static void __iomem * sched_clk_base;
|
|
|
|
static u64 notrace integrator_read_sched_clock(void)
|
|
{
|
|
return -readl(sched_clk_base + TIMER_VALUE);
|
|
}
|
|
|
|
static void integrator_clocksource_init(unsigned long inrate,
|
|
void __iomem *base)
|
|
{
|
|
u32 ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC;
|
|
unsigned long rate = inrate;
|
|
|
|
if (rate >= 1500000) {
|
|
rate /= 16;
|
|
ctrl |= TIMER_CTRL_DIV16;
|
|
}
|
|
|
|
writel(0xffff, base + TIMER_LOAD);
|
|
writel(ctrl, base + TIMER_CTRL);
|
|
|
|
clocksource_mmio_init(base + TIMER_VALUE, "timer2",
|
|
rate, 200, 16, clocksource_mmio_readl_down);
|
|
|
|
sched_clk_base = base;
|
|
sched_clock_register(integrator_read_sched_clock, 16, rate);
|
|
}
|
|
|
|
static unsigned long timer_reload;
|
|
static void __iomem * clkevt_base;
|
|
|
|
/*
|
|
* IRQ handler for the timer
|
|
*/
|
|
static irqreturn_t integrator_timer_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct clock_event_device *evt = dev_id;
|
|
|
|
/* clear the interrupt */
|
|
writel(1, clkevt_base + TIMER_INTCLR);
|
|
|
|
evt->event_handler(evt);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void clkevt_set_mode(enum clock_event_mode mode, struct clock_event_device *evt)
|
|
{
|
|
u32 ctrl = readl(clkevt_base + TIMER_CTRL) & ~TIMER_CTRL_ENABLE;
|
|
|
|
/* Disable timer */
|
|
writel(ctrl, clkevt_base + TIMER_CTRL);
|
|
|
|
switch (mode) {
|
|
case CLOCK_EVT_MODE_PERIODIC:
|
|
/* Enable the timer and start the periodic tick */
|
|
writel(timer_reload, clkevt_base + TIMER_LOAD);
|
|
ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE;
|
|
writel(ctrl, clkevt_base + TIMER_CTRL);
|
|
break;
|
|
case CLOCK_EVT_MODE_ONESHOT:
|
|
/* Leave the timer disabled, .set_next_event will enable it */
|
|
ctrl &= ~TIMER_CTRL_PERIODIC;
|
|
writel(ctrl, clkevt_base + TIMER_CTRL);
|
|
break;
|
|
case CLOCK_EVT_MODE_UNUSED:
|
|
case CLOCK_EVT_MODE_SHUTDOWN:
|
|
case CLOCK_EVT_MODE_RESUME:
|
|
default:
|
|
/* Just leave in disabled state */
|
|
break;
|
|
}
|
|
|
|
}
|
|
|
|
static int clkevt_set_next_event(unsigned long next, struct clock_event_device *evt)
|
|
{
|
|
unsigned long ctrl = readl(clkevt_base + TIMER_CTRL);
|
|
|
|
writel(ctrl & ~TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
|
|
writel(next, clkevt_base + TIMER_LOAD);
|
|
writel(ctrl | TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct clock_event_device integrator_clockevent = {
|
|
.name = "timer1",
|
|
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
|
|
.set_mode = clkevt_set_mode,
|
|
.set_next_event = clkevt_set_next_event,
|
|
.rating = 300,
|
|
};
|
|
|
|
static struct irqaction integrator_timer_irq = {
|
|
.name = "timer",
|
|
.flags = IRQF_TIMER | IRQF_IRQPOLL,
|
|
.handler = integrator_timer_interrupt,
|
|
.dev_id = &integrator_clockevent,
|
|
};
|
|
|
|
static void integrator_clockevent_init(unsigned long inrate,
|
|
void __iomem *base, int irq)
|
|
{
|
|
unsigned long rate = inrate;
|
|
unsigned int ctrl = 0;
|
|
|
|
clkevt_base = base;
|
|
/* Calculate and program a divisor */
|
|
if (rate > 0x100000 * HZ) {
|
|
rate /= 256;
|
|
ctrl |= TIMER_CTRL_DIV256;
|
|
} else if (rate > 0x10000 * HZ) {
|
|
rate /= 16;
|
|
ctrl |= TIMER_CTRL_DIV16;
|
|
}
|
|
timer_reload = rate / HZ;
|
|
writel(ctrl, clkevt_base + TIMER_CTRL);
|
|
|
|
setup_irq(irq, &integrator_timer_irq);
|
|
clockevents_config_and_register(&integrator_clockevent,
|
|
rate,
|
|
1,
|
|
0xffffU);
|
|
}
|
|
|
|
static void __init integrator_ap_timer_init_of(struct device_node *node)
|
|
{
|
|
const char *path;
|
|
void __iomem *base;
|
|
int err;
|
|
int irq;
|
|
struct clk *clk;
|
|
unsigned long rate;
|
|
struct device_node *pri_node;
|
|
struct device_node *sec_node;
|
|
|
|
base = of_io_request_and_map(node, 0, "integrator-timer");
|
|
if (IS_ERR(base))
|
|
return;
|
|
|
|
clk = of_clk_get(node, 0);
|
|
if (IS_ERR(clk)) {
|
|
pr_err("No clock for %s\n", node->name);
|
|
return;
|
|
}
|
|
clk_prepare_enable(clk);
|
|
rate = clk_get_rate(clk);
|
|
writel(0, base + TIMER_CTRL);
|
|
|
|
err = of_property_read_string(of_aliases,
|
|
"arm,timer-primary", &path);
|
|
if (WARN_ON(err))
|
|
return;
|
|
pri_node = of_find_node_by_path(path);
|
|
err = of_property_read_string(of_aliases,
|
|
"arm,timer-secondary", &path);
|
|
if (WARN_ON(err))
|
|
return;
|
|
sec_node = of_find_node_by_path(path);
|
|
|
|
if (node == pri_node) {
|
|
/* The primary timer lacks IRQ, use as clocksource */
|
|
integrator_clocksource_init(rate, base);
|
|
return;
|
|
}
|
|
|
|
if (node == sec_node) {
|
|
/* The secondary timer will drive the clock event */
|
|
irq = irq_of_parse_and_map(node, 0);
|
|
integrator_clockevent_init(rate, base, irq);
|
|
return;
|
|
}
|
|
|
|
pr_info("Timer @%p unused\n", base);
|
|
clk_disable_unprepare(clk);
|
|
}
|
|
|
|
CLOCKSOURCE_OF_DECLARE(integrator_ap_timer, "arm,integrator-timer",
|
|
integrator_ap_timer_init_of);
|