Gustavo Pimentel ec58ba16e1 ARC: [plat-hsdk]: Configure APB GPIO controller on ARC HSDK platform ... In case of HSDK we have intermediate INTC in for of DW APB GPIO controller which is used as a de-bounce logic for interrupt wires that come from outside the board. We cannot use existing "irq-dw-apb-ictl" driver here because all input lines are routed to corresponding output lines but not muxed into one line (this is configured in RTL and we cannot change this in software). But even if we add such a feature to "irq-dw-apb-ictl" driver that won't benefit us as higher-level INTC (in case of HSDK it is IDU) anyways has per-input control so adding fully-controller intermediate INTC will only bring some overhead on interrupt processing but no other benefits. Thus we just do one-time configuration of DW APB GPIO controller and forget about it. Based on implementation available on arch/arc/plat-axs10x/axs10x.c file. Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>		2018-07-09 11:21:21 -07:00
..
Kconfig	ARC: [plat-hsdk] Add PCIe support	2018-06-21 09:05:47 -07:00
Makefile
platform.c	ARC: [plat-hsdk]: Configure APB GPIO controller on ARC HSDK platform	2018-07-09 11:21:21 -07:00