Sricharan R 96893e101e clk: qcom: Put venus core0/1 gdscs to hw control mode ... The venus video ip's internal core blocks are under the control of the firmware and their powerdomains needs to be 'ON' only when used by the firmware. So putting it into hw controlled mode lets this to happen, otherwise the firmware hangs checking for this. Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>		2016-11-23 16:41:19 -08:00
..
clk-alpha-pll.c	clk: qcom: Add .is_enabled ops for clk-alpha-pll	2016-11-02 14:52:58 -07:00
clk-alpha-pll.h	clk: qcom: Enable FSM mode for votable alpha PLLs	2016-11-01 18:39:17 -07:00
clk-branch.c
clk-branch.h
clk-pll.c	clk: qcom: Enable FSM mode for votable alpha PLLs	2016-11-01 18:39:17 -07:00
clk-pll.h
clk-rcg2.c	clk: qcom: Add rcg ops to return floor value closest to the requested rate	2016-11-23 11:00:05 -08:00
clk-rcg.c
clk-rcg.h	clk: qcom: Add rcg ops to return floor value closest to the requested rate	2016-11-23 11:00:05 -08:00
clk-regmap-divider.c
clk-regmap-divider.h
clk-regmap-mux.c
clk-regmap-mux.h
clk-regmap.c	clk: qcom: Migrate to clk_hw based registration and OF APIs	2016-08-24 17:37:06 -07:00
clk-regmap.h	clk: qcom: Migrate to clk_hw based registration and OF APIs	2016-08-24 17:37:06 -07:00
clk-rpm.c	clk: qcom: clk-rpm: Fix clk_hw references	2016-11-23 11:12:48 -08:00
clk-smd-rpm.c	clk: qcom: clk-smd-rpm: Fix clk_hw references	2016-11-23 11:12:47 -08:00
common.c	clk: qcom: Add rcg ops to return floor value closest to the requested rate	2016-11-23 11:00:05 -08:00
common.h	clk: qcom: Add rcg ops to return floor value closest to the requested rate	2016-11-23 11:00:05 -08:00
gcc-apq8084.c	clk: qcom: Move all sdcc rcgs to use clk_rcg2_floor_ops	2016-11-23 11:00:06 -08:00
gcc-ipq806x.c	clk: qcom: ipq806x: Fix board clk rates	2016-11-09 17:10:32 -08:00
gcc-ipq4019.c	clk: qcom: ipq4019: changed i2c freq table	2016-11-01 18:29:23 -07:00
gcc-mdm9615.c	clk: qcom: Migrate to clk_hw based registration and OF APIs	2016-08-24 17:37:06 -07:00
gcc-msm8660.c
gcc-msm8916.c	clk: qcom: Move all sdcc rcgs to use clk_rcg2_floor_ops	2016-11-23 11:00:06 -08:00
gcc-msm8960.c
gcc-msm8974.c	clk: qcom: Move all sdcc rcgs to use clk_rcg2_floor_ops	2016-11-23 11:00:06 -08:00
gcc-msm8994.c	clk: qcom: Move all sdcc rcgs to use clk_rcg2_floor_ops	2016-11-23 11:00:06 -08:00
gcc-msm8996.c	clk: qcom: Move all sdcc rcgs to use clk_rcg2_floor_ops	2016-11-23 11:00:06 -08:00
gdsc.c	clk: qcom: gdsc: Add support for gdscs with HW control	2016-11-23 16:41:15 -08:00
gdsc.h	clk: qcom: gdsc: Add support for gdscs with HW control	2016-11-23 16:41:15 -08:00
Kconfig	Merge branch 'clk-qcom-rpm' into clk-next	2016-11-10 16:50:16 -08:00
lcc-ipq806x.c	clk: qcom: lcc-ipq806x: Fixup overriding val in regmap_read call	2016-11-01 17:44:09 -07:00
lcc-mdm9615.c
lcc-msm8960.c
Makefile	Merge branch 'clk-qcom-rpm' into clk-next	2016-11-10 16:50:16 -08:00
mmcc-apq8084.c
mmcc-msm8960.c
mmcc-msm8974.c
mmcc-msm8996.c	clk: qcom: Put venus core0/1 gdscs to hw control mode	2016-11-23 16:41:19 -08:00
reset.c
reset.h