kernel_optimize_test/drivers/block/null_blk_zoned.c
Masato Suzuki ea2c18e104 null_blk: Add conventional zone configuration for zoned support
Allow the creation of conventional zones by adding the zone_nr_conv
configuration attribute. This new attribute is used only for zoned devices
and indicates the number of conventional zones to create. The default value
is 0. Since host-managed zoned block devices must always have at least one
sequential zone, if the value of zone_nr_conv is larger than or equal to
the total number of zones of the device nr_zones, zone_nr_conv is
automatically changed to nr_zones - 1.

Reviewed-by: Matias Bjorling <matias.bjorling@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Masato Suzuki <masato.suzuki@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07 13:41:50 -07:00

142 lines
3.3 KiB
C

// SPDX-License-Identifier: GPL-2.0
#include <linux/vmalloc.h>
#include "null_blk.h"
/* zone_size in MBs to sectors. */
#define ZONE_SIZE_SHIFT 11
static inline unsigned int null_zone_no(struct nullb_device *dev, sector_t sect)
{
return sect >> ilog2(dev->zone_size_sects);
}
int null_zone_init(struct nullb_device *dev)
{
sector_t dev_size = (sector_t)dev->size * 1024 * 1024;
sector_t sector = 0;
unsigned int i;
if (!is_power_of_2(dev->zone_size)) {
pr_err("null_blk: zone_size must be power-of-two\n");
return -EINVAL;
}
dev->zone_size_sects = dev->zone_size << ZONE_SIZE_SHIFT;
dev->nr_zones = dev_size >>
(SECTOR_SHIFT + ilog2(dev->zone_size_sects));
dev->zones = kvmalloc_array(dev->nr_zones, sizeof(struct blk_zone),
GFP_KERNEL | __GFP_ZERO);
if (!dev->zones)
return -ENOMEM;
if (dev->zone_nr_conv >= dev->nr_zones) {
dev->zone_nr_conv = dev->nr_zones - 1;
pr_info("null_blk: changed the number of conventional zones to %u",
dev->zone_nr_conv);
}
for (i = 0; i < dev->zone_nr_conv; i++) {
struct blk_zone *zone = &dev->zones[i];
zone->start = sector;
zone->len = dev->zone_size_sects;
zone->wp = zone->start + zone->len;
zone->type = BLK_ZONE_TYPE_CONVENTIONAL;
zone->cond = BLK_ZONE_COND_NOT_WP;
sector += dev->zone_size_sects;
}
for (i = dev->zone_nr_conv; i < dev->nr_zones; i++) {
struct blk_zone *zone = &dev->zones[i];
zone->start = zone->wp = sector;
zone->len = dev->zone_size_sects;
zone->type = BLK_ZONE_TYPE_SEQWRITE_REQ;
zone->cond = BLK_ZONE_COND_EMPTY;
sector += dev->zone_size_sects;
}
return 0;
}
void null_zone_exit(struct nullb_device *dev)
{
kvfree(dev->zones);
}
int null_zone_report(struct gendisk *disk, sector_t sector,
struct blk_zone *zones, unsigned int *nr_zones,
gfp_t gfp_mask)
{
struct nullb *nullb = disk->private_data;
struct nullb_device *dev = nullb->dev;
unsigned int zno, nrz = 0;
if (!dev->zoned)
/* Not a zoned null device */
return -EOPNOTSUPP;
zno = null_zone_no(dev, sector);
if (zno < dev->nr_zones) {
nrz = min_t(unsigned int, *nr_zones, dev->nr_zones - zno);
memcpy(zones, &dev->zones[zno], nrz * sizeof(struct blk_zone));
}
*nr_zones = nrz;
return 0;
}
void null_zone_write(struct nullb_cmd *cmd, sector_t sector,
unsigned int nr_sectors)
{
struct nullb_device *dev = cmd->nq->dev;
unsigned int zno = null_zone_no(dev, sector);
struct blk_zone *zone = &dev->zones[zno];
switch (zone->cond) {
case BLK_ZONE_COND_FULL:
/* Cannot write to a full zone */
cmd->error = BLK_STS_IOERR;
break;
case BLK_ZONE_COND_EMPTY:
case BLK_ZONE_COND_IMP_OPEN:
/* Writes must be at the write pointer position */
if (sector != zone->wp) {
cmd->error = BLK_STS_IOERR;
break;
}
if (zone->cond == BLK_ZONE_COND_EMPTY)
zone->cond = BLK_ZONE_COND_IMP_OPEN;
zone->wp += nr_sectors;
if (zone->wp == zone->start + zone->len)
zone->cond = BLK_ZONE_COND_FULL;
break;
case BLK_ZONE_COND_NOT_WP:
break;
default:
/* Invalid zone condition */
cmd->error = BLK_STS_IOERR;
break;
}
}
void null_zone_reset(struct nullb_cmd *cmd, sector_t sector)
{
struct nullb_device *dev = cmd->nq->dev;
unsigned int zno = null_zone_no(dev, sector);
struct blk_zone *zone = &dev->zones[zno];
if (zone->type == BLK_ZONE_TYPE_CONVENTIONAL) {
cmd->error = BLK_STS_IOERR;
return;
}
zone->cond = BLK_ZONE_COND_EMPTY;
zone->wp = zone->start;
}